arXiv subjects

Daniel Erni

Publications and source records attributed to Daniel Erni.

9 recordsLinked to original sources

arXiv2026

Spatio-temporal coherent molding and retrieval of pulsed signals in optical waveguides

Optical waveguides are key elements for high fidelity, long distance optical communications. Coupled waveguide arrays allow for higher information density, steerting the propagation direction, and for encoding information. However, due to the mixing of relative phases for short pulses containing multiple waveguide-mode frequencies, a process for retrieving an encoded input state once these signals undergo coherent propagation remains elusive. A concept is presented to extract with high fidelity the phase-encrypted input signal from spatio-temporal propagated states. As a realization, an array of coupled waveguides is suggested with the retrieval mechanism being realized by local phase shifts that comply with the identified retrieval concept. Three dimensional full-wave electromagnetic simulations for broadband optical signals in coupled dielectric waveguides confirm the validity of the scheme and the high fidelity of information retrieval pointing to potential applications, for instance in ultrafast coherent coding and decoding of information imprinted on pulse sequences.

physics.optics↗

arXiv2025

Photonics of topological magnetic textures

Topological textures in magnetically ordered materials are important case studies for fundamental research with promising applications in data science. They can also serve as photonic elements to mold electromagnetic fields endowing them with features inherent to the spin order, as demonstrated analytically and numerically in this work. A self-consistent theory is developed for the interaction of spatially structured electromagnetic fields with non-collinear, topologically non-trivial spin textures. A tractable numerical method is designed and implemented for the calculation of the formed magnetic/photonic textures in the entire simulation space. Numerical illustrations are presented for scattering from point-like singularities, i.e. Bloch points, in the magnetization vector fields, evidencing that the geometry and topology of the magnetic order results in photonic fields that embody orbital angular momentum, chirality as well as magnetoelectric densities. Features of the scattered fields can serve as a fingerprint for the underlying magnetic texture and its dynamics. The findings point to the potential of topological magnetic textures as a route to molding photonic fields.

cond-mat.other↗

arXiv2023

The Importance of Subcellular Structures to the Modeling of Biological Cells in the Context of Computational Bioelectromagnetics Simulations

Numerical investigation of the interaction of electromagnetic fields with eukaryotic cells requires specifically adapted computer models. Virtual microdosimetry, used to investigate exposure, requires volumetric cell models, which are numerically challenging. For this reason, a method is presented here to determine the current and power densities occurring in single cells and their distinct compartments in a spatially accurate manner as a first step towards multicellular models within the microstructure of tissue layers. To achieve this, 3D models of the electromagnetic exposure of generic eukaryotic cells of different shape (i.e. spherical and ellipsoidal) and internal complexity (i.e. different organelles) are performed in a virtual, FEM-based capacitor experiment in the frequency range from 10 Hz to 100 GHz. In this context, the spectral response of the current and power distribution within the cell compartments is investigated and any effects that occur are attributed either to the dispersive material properties of these compartments or to the geometric characteristics of the cell model investigated in each case. In these investigations, the cell is represented as an anisotropic body with an internal distributed membrane system of low conductivity that mimics the endoplasmic reticulum in a simplified manner. This will be used to determine which details of the cell interior need to be modeled, how the electric field and the current density will be distributed in this region, and where the electromagnetic energy is absorbed in the microstructure regarding electromagnetic microdosimetry. Results show that for 5G frequencies, membranes make a significant contribution to the absorption losses.

physics.app-ph↗

arXiv2021

Particle Size-Dependent Onset of the Quantum Regime in Ideal Dimers of Gold Nanospheres

We report on the nanoparticle-size-dependent onset of quantum tunneling of electrons across the sub-nanometer gaps in three different sizes (30, 50, and 80 nm) of highly uniform gold nanosphere dimers. For precision plasmonics, the gap distance is systematically controlled at the level of single C-C bonds via a series of alkanedithiol linkers (C2-C16). The corresponding single-particle scattering spectra reveal that for the larger dimers the onset of quantum effects occurs at larger gap distances: C6 for 80 nm, C5 for 50 nm, and C4 for 30 nm dimers. 2D non-local and quantum-corrected model (QCM) calculations reveal the physical origin for this experimental observation: the lower curvature of the larger particles leads to a higher tunneling current due to a larger effective conductivity volume in the gap. Our results have possible implications in scenarios where precise geometrical control over plasmonics properties is crucial such as in hybrid (molecule-metal) and/or quantum plasmonic devices.

physics.optics↗

arXiv2020

Limits of effective material properties in the context of an electromagnetic tissue model

Most calibration schemes for reflection-based tissue spectroscopy in the mm-wave/THz-frequency range are based on homogenized, frequency-dependent tissue models where macroscopic material parameters have either been determined by measurement or calculated using effective material theory. However, as the resolution of measurement at these frequencies captures the underlying microstructure of the tissue, here we will investigate the validity limits of such effective material models over a wide frequency range (10 MHz - 200 GHz) . Embedded in a parameterizable virtual workbench, we implemented a numerical homogenization method using a hierarchical multiscale approach to capture both the dispersive and tensorial electromagnetic properties of the tissue, and determined at which frequency this homogenized model deviated from a full-wave electromagnetic reference model within the framework of a Monte Carlo analysis. Simulations were carried out using a generic hypodermal tissue that emulated the morphology of the microstructure. Results showed that the validity limit occurred at surprisingly low frequencies and thus contradicted the traditional usage of homogenized tissue models. The reasons for this are explained in detail and thus it is shown how both the lower "allowed" and upper "forbidden" frequency ranges can be used for frequency-selective classification/identification of specific material and structural properties employing a supervised machine-learning approach. Using the implemented classifier, we developed a method to identify specific frequency bands in the forbidden frequency range to optimize the reliability of material classification.

physics.app-ph↗

arXiv2020

Characterization of Dielectric Materials by Sparse Signal Processing with Iterative Dictionary Updates

Estimating parameters and properties of various materials without causing damage to the material under test (MUT) is important in many applications. Thus, in this letter, we address this by wireless sensing. Here, the accuracy of the estimation depends on the accurate estimation of the properties of the reflected signal from the MUT (e.g., number of reflections, their amplitudes and time delays). For a layered MUT, there are multiple reflections and, due to the limited bandwidth at the receiver, these reflections superimpose each other. Since the number of reflections coming from the MUT is limited, we propose sparse signal processing (SSP) to decompose the reflected signal. In SSP, a so called dictionary is required to obtain a sparse representation of the signal. Here, instead of a fixed dictionary, a dictionary update technique is proposed to improve the estimation of the reflected signal. To validate the proposed method, a vector network analyzer (VNA) based measurement setup is used. It turns out that the estimated dielectric constants are in close agreement with the dielectric constants of the MUTs reported in literature. Further, the proposed approach outperforms the state-of-the-art model-based curve-fitting approach in thickness estimation.

eess.SP↗

arXiv2012

Reduced Coulomb interaction in organic solar cells by the introduction of inorganic high-k nanostructured materials

In this article a concept is introduced, which allows for reduced Coulomb interaction in organic solar cells and as such for enhanced power conversion efficiencies. The concept is based on the introduction of electrically insulating, nanostructured high-k materials into the organic matrix, which do not contribute to the charge transport, however, effectively enhance the permittivity of the organic active layer and thereby reduce the Coulomb interaction. Using an analytical model it is demonstrated that even at a distance of 20 nm to the organic / inorganic interface of the nanostructure, the Coulomb interaction can be reduced by more than 15 %. The concept is implemented using P3HT:PCBM solar cells with integrated high-k nanoparticles (strontium titanate). It could be demonstrated that in comparison to a reference cell without integrated nanoparticles, the power conversion efficiencies could be improved by ~20 %.

cond-mat.mtrl-sci↗

arXiv2004

Energy-time entanglement preservation in plasmon-assisted light transmission

We report on experimental evidences of the preservation of energy-time entanglement for extraordinary plasmonic light transmission through sub-wavelength metallic hole arrays, and for long range surface plasmon polaritons. Plasmons are shown to coherently exist at two different times separated by much more than the plasmons lifetime. This kind of entanglement involving light and matter is expected to be useful for future processing and storing of quantum information.

quant-ph↗

arXiv2003

Theory of Plasmon-assisted Transmission of Entangled Photons

The recent surface plasmon entanglement experiment [E. Altewischer et al., Nature (London) 418, 304 (2002)] is theoretically analyzed. The entanglement preservation upon transmission in the non-focused case is found to provide information about the interaction of the biphoton and the metallic film. The entanglement degradation in the focused case is explained in the framework of a fully multimode model. This phenomenon is a consequence of the polarization-selective filtering behavior of the metallic nanostructured film.

quant-ph↗