arXiv subjects
Publications and source records attributed to Daniel Flamm.
{We report on an intensity-only and deep-learning based method for laser beam characterization that allows to predict the underlying optical field within milliseconds. A simple near-field / far-field camera setup enables online control of an adaptive optics to optimize beam quality. The robustness and precision of the method is enhanced by applying the concept of phase diversity based on spiral phase plates.
We present an overview on the development and characterization of multiscale laser processing optics for versatile material modifications across more than six orders of magnitude. Starting with solutions for micromachining we present high-NA microscope objectives creating sub-wavelength material modifications on macroscopic scales with highest peak intensities. Moving on to the millimeter range, the adaptability and scalability of scanning optics is examined for large-area machining. Finally, we explore line beam optics in the meter range, evaluating their use in uniform material processing using average powers above 100kW. This study provides an insight into the design and performance characteristics of such optics and demonstrates their potential in advanced laser processing.
Simulations and measurements on selective laser etching of display glasses are reported. By means of a holographic 3D beam splitter, ultrashort laser pulses are focused inside the volume of a glass sample creating type III modifications along a specific trajectory like pearls on a string. Superimposed by a feed of the glass sample a full 3D area of modifications is achieved building the cornerstone for subsequent etch processes. Based on KOH the modifications are selectively etched at a much higher rate compared to unmodified regions resulting in a separation of the glass along the trajectory of modifications. For gaining further insight into the etch process, we perform simulations on this wet chemical process and compare it to our experimental results.
A standardized phase retrieval algorithm is presented and applied to an industry-grade high-energy ultrashort pulsed laser to uncover its spatial phase distribution. We describe in detail how to modify the well-known algorithm in order to characterize particularly strong light sources from intensity measurements only. With complete information about the optical field of the unknown light source at hand, virtual back propagation can reveal weak points in the light path such as apertures or damaged components.
A procedure and optical concept is introduced for ultrashort pulsed laser cleaving of transparent materials with tailored edges in a single pass. The procedure is based on holographically splitting a number of foci along the desired edge geometry including C-shaped edges with local 45{\deg} tangential angles to the surface. Single-pass, full thickness laser modifications are achieved requiring single-side access to the workpiece only without inclining the optical head. After having induced laser modifications with feed rates of 1 m/s actual separation is performed using a selective etching strategy.
The separation of complex inner and outer contours of glass articles with curved surfaces using ultrashort pulsed lasers is reported. Single-pass, full-thickness modifications along the entire substrate are achieved using a processing optics that allows for beam shaping of non-diffracting beams and, additionally, for aberration compensation of phase distortions occurring at the curved interface. The glass articles finally separated by thermal stress or via selective etching meet the demands of the medical industry in terms of micro-debris, surface quality and processing speed.
A novel concept for dynamic focus shaping based on highly efficient coherent beam combining with microlens arrays (MLA) as combining element is presented. This concept allows to control the power weights of diffraction orders by varying the absolute phases of an array of input beams. A proof-of-principle experiment is supported by simulations. For this, an input beam matrix of 5 x 5 beams is combined proving both the ability for further power scaling and dynamic focus shaping.
The homogenization of light is widely applied in various industrial sectors. The uniform high power processing of large areas requires a high degree of homogeneity. Sophisticated beam transformation techniques are used to optimize the illumination of standard optical diffusers such as microlens arrays and decrease the contrast of interference. Novel design techniques take advantage of a multimodal approach which is especially adapted to the characteristic properties of the laser light source. We show how anamorphic beam shaping is employed to transform the high power light source in order to meet the required level of homogeneity suited for the respective application.
The industrial maturity of ultrashort pulsed lasers has triggered the development of a plethora of material processing strategies. Recently, the combination of these remarkable temporal pulse properties with advanced structured light concepts has led to breakthroughs in the development of novel laser application methods, which will now gradually reach industrial environments. We review the efficient generation of customized focus distributions from the near infrared down to the deep ultraviolet, e.g., based on non-diffracting beams and 3D-beam splitters, and demonstrate their impact for micro- and nanomachining of a wide range of materials. In the beam shaping concepts presented, special attention was paid to suitability for both high energies and high powers.
The remarkable temporal properties of ultra-short pulsed lasers in combination with novel beam shaping concepts enable the development of completely new material processing strategies. We demonstrate the benefit of employing focus distributions being tailored in all three spatial dimensions. As example advanced Bessel-like beam profiles, 3D-beam splitting concepts and flat-top focus distributions are used to achieve high-quality and efficient results for cutting, welding and drilling applications. Spatial and temporal in situ diagnostics is employed to analyze light-matter interaction and, in combination with flexible digital-holographic beam shaping techniques, to find the optimal beam shape for the respective laser application.
We report on the usage of ultrashort laser pulses in form of aberration-corrected Bessel-like beams for laser cutting of glass with bevels. Our approach foresees to incline the material's entrance surface with respect to the processing optics. The detailed analysis of phase distortions caused by the beam transition through the tilted glass surface allows to pre-compensate occurring aberrations using digital holography. We verify theoretical considerations by means of pump-probe microscopy and present high-quality edges in non-strengthened silicate glass.
In this work, a numerical modal decomposition approach is applied to model the optical field of laser light after propagating through a highly multi-mode fiber. The algorithm for the decomposition is based on the reconstruction of measured intensity profiles along the laser beam caustic with consideration of intermodal degrees of coherence derived from spectral analysis. To enhance the accuracy of the model, different approaches and strategies are applied and discussed. The presented decomposition into a set of LP modes enables both the wave-optical simulation of radiation transport by highly multi-mode fibers and, additionally, the analysis of free-space propagation with arbitrarily modified complex amplitude distributions.
A novel concept for coherent beam combining is presented based on a simple setup with microlens arrays. These standard components are used in a proof-of-principle experiment for both coherent beam splitting and combination of 5 x 5 beams. Here a combination efficiency above 90% is achieved. We call this novel concept mixed aperture.
We generalize the well-known method of generating nondiffracting beams based on axicons by allowing phase modulations with azimuthal dependencies. This generalization includes the description of Bessel-like beams of zero order, higher orders and superpositions thereof. We present the enormous benefit of our approach for highly efficient and robust shaping of nondiffracting beams with arbitrary transverse profiles. The concept's versatility is demonstrated by discussing generation and propagation of various nondiffracting beams with potential regarding laser materials processing.
We present a real-time method to determine the beam propagation ratio M2 of laser beams. The all-optical measurement of modal amplitudes yields M2 parameters conform to the ISO standard method. The experimental technique is simple and fast, which allows to investigate laser beams under conditions inaccessible to other methods.