arXiv subjects
Publications and source records attributed to Daniel Jeans.
Detectors designed for the International Linear Collider have been studied over many years, and a good understanding of the relevant requirements and constraints has been developed. With the prospect of future Higgs Factory projects with different properties (for example, the FCC-ee), the adaptations required for use at such facilities are being investigated. We outline our current understanding in this note.
Quantum Tomography of tau lepton pairs produced at a Higgs Factory collider will enable measurements of their spin correlations arising from quantum entanglement. Such measurements rely on the ability to measure the components of and correlations between the taus' spins. We present a method to fully reconstruct the kinematics of tau pair events at an electron-positron Higgs factory collider, making use of measured particles' momenta and impact parameters. This procedure results in several consistent solutions per event, which can be assigned weights according to various event properties. Full kinematic reconstruction allows the optimal extraction of the taus' spin orientation via polarimeters. We estimate the precision with which polarimeters can be reconstructed in an ideal detector, and quantify the effects of more realistic detector performance. We conclude that for this analysis, achieving a photon angular resolution of around 0.1~mrad is the most crucial aspect of detector performance, while photon energy resolution and vertex detector performance are significantly less important.
Electroweak Precision Measurements are stringent tests of the Standard Model and sensitive probes to New Physics. Accurate studies of the $Z$-boson couplings to the first-generation quarks, which are currently constrained from LEP data to a few percent, could reveal potential discrepancies from the theory predictions. Future $e^+e^-$ colliders running at the $Z$-pole would be an excellent tool for an analysis based on a comparison of radiative and non-radiative $Z$ boson decays. In this paper, we present a method to extract the values of the $Z$ couplings to light quarks and discuss the uncertainty of the measurement, including contributions from various systematic effects. We show that systematic uncertainty in the heavy-flavour tagging performance is the key factor in the analysis and reducing it to a sub-permille level might be crucial to fully profit from the high luminosity of future $e^+e^-$ machines. The measurement could improve the LEP results by at least an order of magnitude.
Electroweak Precision Measurements are stringent tests of the Standard Model and sensitive probes to New Physics. Accurate studies of the Z-boson couplings to the first-generation quarks could reveal potential discrepancies between the fundamental theory and experimental data. Future lepton colliders offering high statistics of Z bosons would be an excellent tool to perform such a measurement based on comparison of radiative and non-radiative hadronic decays of the Z boson. Due to the difference in quark charge, the relative contribution of the events with final-state radiation (FSR) directly reflects the ratio of up- and down-type quark decays. Such an analysis requires a proper distinction between photons coming from different sources, including initial-state radiation (ISR), FSR, parton showers and hadronisation. In our talk, we will show how to extract the values of the Z couplings to quarks and present preliminary results of the analysis for ILC.
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
The precise measurement of physics observables and the test of their consistency within the standard model (SM) are an invaluable approach, complemented by direct searches for new particles, to determine the existence of physics beyond the standard model (BSM). Studies of massive electroweak gauge bosons (W and Z bosons) are a promising target for indirect BSM searches, since the interactions of photons and gluons are strongly constrained by the unbroken gauge symmetries. They can be divided into two categories: (a) Fermion scattering processes mediated by s- or t-channel W/Z bosons, also known as electroweak precision measurements; and (b) multi-boson processes, which include production of two or more vector bosons in fermion-antifermion annihilation, as well as vector boson scattering (VBS) processes. The latter categories can test modifications of gauge-boson self-interactions, and the sensitivity is typically improved with increased collision energy. This report evaluates the achievable precision of a range of future experiments, which depend on the statistics of the collected data sample, the experimental and theoretical systematic uncertainties, and their correlations. In addition it presents a combined interpretation of these results, together with similar studies in the Higgs and top sector, in the Standard Model effective field theory (SMEFT) framework. This framework provides a model-independent prescription to put generic constraints on new physics and to study and combine large sets of experimental observables, assuming that the new physics scales are significantly higher than the EW scale.
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
Measurement of the tau lepton polarization in \eett\ is an important electro-weak measurement at ILC and other future electron-positron colliders. In this paper we discuss several methods to extract polarimeter information for \eett\ events at the nominal centre-of-mass energy, and develop a new method, based on charged particle impact parameter measurement, which can accurately reconstruct tau momenta even in events with significant Initial State Radiation. In future work we will extend the study to estimate the precision with which the tau polarization can be measured at ILC-250, both for high-mass tau pairs and for those which radiatively return to the $Z^0$ peak. This will complement our past study which showed that the tau polarization can be measured to better than 1\% at the ILC-500.
We consider a gauged B$-$L (Baryon number minus Lepton number) extension of the Standard Model (SM), which is anomaly free in the presence of three SM singlet Right Handed Neutrinos (RHNs). Associated with the $U(1)_{\rm B-L}$ gauge symmetry breaking, the RHNs acquire Majorana masses and then with the electroweak symmetry breaking, tiny Majorana masses for the SM(-like) neutrinos are naturally generated by the seesaw mechanism. As a result of the seesaw mechanism, the heavy mass eigenstates which are mainly composed of the SM-singlet RHNs obtain suppressed electroweak interactions through small mixings with the SM neutrinos. To investigate the seesaw mechanism, we study the pair production of heavy Majorana neutrinos through the $U(1)_{\rm B-L}$ gauge boson $Z^\prime$ at the 250 GeV and 500 GeV International Linear Collider (ILC). Considering the current and prospective future bounds on the B$-$L model parameters from the search for a resonant $Z^\prime$ boson production at the Large Hadron Collider (LHC), we focus on a "smoking-gun" signature of the Majorana nature of the heavy neutrinos: a final state with a pair of same-sign, same-flavor leptons, small missing momentum, and four hadronic jets. We estimate the projected significance of the signature at the ILC.
To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ studies at Snowmass.
The process $e^- e^+ \to τ^- τ^+$ is of particular interest because the tau lepton polarisation can be reconstructed, allowing its chiral nature to be probed. This note reports on a study of the reconstruction of the di-tau final state at ILC-500, its selection and the reduction of backgrounds, the identification of the tau lepton's decay mode, and on the extraction of the tau leptons' polarisation. The performance of this analysis is studied in two models of the ILD detector, one larger (IDR-L) the other smaller (IDR-S), which differ in the outer radius of the TPC and of the subdetectors beyond, and in the magnetic field strength of the detector solenoid. We find that the high-mass tau-pair events in which at least one tau decays haronically can be selected with an efficiency of around 60%, with a remaining background from non-di-tau processes at the few-% level. Single-prong decay modes $τ^\pm \to π^\pm ν, τ^\pm \to π^\pm π^0 ν, τ^\pm \to π^\pm π^0 π^0 ν$ can be correctly identified in around 60-90% of cases, with sample purities in the range 50-90%, depending on decay mode. The sensitivity to tau polarisation was estimated in the four beam polarisation datasets envisaged for the $4\ ab^{-1}$ of data forseen for ILC-500. Statistical precisions on the polarisation in the different datasets are predicted to be between 0.5 and 2%. While some small performance differences between the two detector models are seen, they have very similar final sensitivity to the polarisation measurement.
This paper presents a full simulation study of the measurement of the production cross section ($\sigma_{\mathrm{ZH}}$) of the Higgsstrahlung process $\mathrm{e^{+}e^{-}\rightarrow ZH}$ and the Higgs boson mass ($M_{\mathrm{H}}$) at the International Linear Collider (ILC), using events in which a Higgs boson recoils against a Z boson decaying into a pair of muons or electrons. The analysis is carried out for three center-of-mass energies $\sqrt{s}$ = 250, 350, and 500 GeV, and two beam polarizations $\mathrm{e_{L}^{-}e_{R}^{+}}$ and $\mathrm{e_{R}^{-}e_{L}^{+}}$, for which the polarizations of $\mathrm{e^{-}}$ and $\mathrm{e^{+}}$ are $\left(P\mathrm{e^{-}},P\mathrm{e^{+}}\right)$ =($-$80\%, +30\%) and (+80\%, $-$30\%), respectively. Assuming an integrated luminosity of 250 $\mathrm{fb^{-1}}$ for each beam polarization at $\sqrt{s}$ = 250 GeV, where the best lepton momentum resolution is obtainable, $\sigma_{\mathrm{ZH}}$ and $M_{\mathrm{H}}$ can be determined with a precision of 2.5\% and 37 MeV for $\mathrm{e_{L}^{-}e_{R}^{+}}$ and 2.9\% and 41 MeV for $\mathrm{e_{R}^{-}e_{L}^{+}}$, respectively. Regarding a 20 year ILC physics program, the expected precisions for the $\mathrm{HZZ}$ coupling and $M_{\mathrm{H}}$ are estimated to be 0.4\% and 14 MeV, respectively. The event selection is designed to optimize the precisions of $\sigma_{\mathrm{ZH}}$ and $M_{\mathrm{H}}$ while minimizing the bias on the measured $\sigma_{\mathrm{ZH}}$ due to discrepancy in signal efficiencies among Higgs decay modes. For the first time, model independence has been demonstrated to a sub-percent level for the $\sigma_{\mathrm{ZH}}$ measurement at each of the three center-of-mass energies. The results presented show the impact of center-of-mass energy and beam polarization on the evaluated precisons and serve as a benchmark for the planning of the ILC run scenario.
We develop from first principles a model to describe the average response of SiPM devices which takes into account the recovery of pixels during the incoming light pulse. Such effects can significantly affect SiPM response when exposed to a large number of photons.
International Large Detector (ILD) adopts Particle Flow Algorithm (PFA) for precise measurement of multiple jets. The electromagnetic calorimeter (ECAL) of ILD has two candidates sensor technologies for PFA, which are pixelized silicon sensors and scintillator-strips with silicon photomultipliers. Pixelized silicon sensors have higher granularity for PFA, however they have an issue of cost reduction. In contrast, scintillator-strips have an advantage of relatively low cost and a disadvantage of degradation of position resolution by ghost hits, which are generated by orthogonal arrangement. Hybrid ECAL using both candidates is proposed to supplement these disadvantages. In this paper, we report an optimization study of the hybrid ECAL using detector simulation.
We present a novel method for the reconstruction of events containing pairs of hadronically decaying tau leptons at collider experiments. This method relies on accurate knowledge of the tau production vertex and precise measurement of its charged decay products. The method makes no assumptions about the centre-of-mass or invariant mass of the tau pair, and is insensitive to momentum loss along the beam direction. We demonstrate the method using e+e- -> mu+ mu- tau+ tau- events fully simulated in the ILD detector.
We describe an algorithm which has been developed to extract fine granularity information from an electromagnetic calorimeter with strip-based readout. Such a calorimeter, based on scintillator strips, is being developed to apply particle flow reconstruction to future experiments in high energy physics. Tests of this algorithm in full detector simulations, using strips of size 45 x 5 mm^2 show that the performance is close to that of a calorimeter with true 5 x 5 mm^2 readout granularity. The performance can be further improved by the use of 10 x 10 mm^2 tile- shaped layers interspersed between strip layers.
The physics program of future lepton colliders such as the ILC, will benefit from a jet energy resolution in the range 3-4%. The International Large Detector (ILD) reaches this goal over a large range of jet energies. In this paper, we report on the dependence of the simulated ILD performance on various parameters of its silicon-tungsten ECAL. We investigate the effects of dead areas in the silicon sensors, the thickness of the PCB at the heart of the detector, and the robustness of its performance with respect to dead channels, noise, mis-calibration and cross-talk.
The International Large Detector (ILD) is a proposed detector for the International Linear Collider (ILC). It has been designed to achieve an excellent jet energy resolution by using Particle Flow Algorithms (PFA), which rely on the ability to separate nearby particles within jets. PFA requires calorimeters with high granularity. The ILD Electromagnetic Calorimeter (ECAL) is a sampling calorimeter with thirty tungsten absorber layers. The total thickness of this ECAL is about 24 X$_0$, and it has between 10 and 100 million channels to make high granularity. Silicon sensors are a candidate technology for the sensitive layers of this ECAL. Present prototypes of these sensors have 256 5.5$\times$5.5 mm$^2$ pixels in an area of 9$\times$9 cm$^2$.We have measured various properties of these prototype sensors: the leakage current, capacitance, and full depletion voltage. We have also examined the response to an infrared laser to understand the sensor's response at its edge and between pixel readout pads, as well the effect of different guard ring designs. In this paper, we show results from these measurements and discuss future works.