arXiv subjects

Daniel Jetter

Publications and source records attributed to Daniel Jetter.

6 recordsLinked to original sources

arXiv2026

Spatial resolution and point spread function of high-resolution scanning SQUID microscopy probes

Superconducting quantum interference devices (SQUIDs) show exceptional sensitivity to magnetic flux. In scanning SQUID microscopy (SSM), SQUID size and its distance to the sample are minimized in order to map weak magnetic fields with best possible spatial resolution. SQUID-on-lever (SOL) architectures have proven especially effective as SSM probes due to their small sensor size, robustness, and ease of integration with conventional atomic force microscopy hardware. In order to optimize magnetic microscopy carried out with SOL probes and to accurately reconstruct the magnetic fields that they measure, it is essential to know their point spread function (PSF). The size and shape of this PSF are determined by magnetic flux focusing effects, which depend on the characteristic length-scales of the superconductor and the sensor geometry. By simulating the coupling to sources of magnetic flux, this work provides a mathematical description of the SOL PSF, which contains a full description of the probe's magnetic sensitivity and spatial resolution. We then use measurements of a single magnetic skyrmion to measure the magnetic flux response of a real SOL. We demonstrate excellent agreement with flux responses that are obtained from simulations, thereby confirming the calculated PSF and spatial resolution.

cond-mat.supr-con↗

arXiv2026

Imaging short- and long-range magnetic order in a quantum anomalous Hall insulator

The quantum anomalous Hall effect has been observed in several magnetically doped topological insulators, where its robustness and macroscopic magnetization properties have been taken to suggest the presence of long-range ferromagnetic order. However, experiments in such systems have found evidence for both long- and short-range order, leaving the precise nature of the magnetism in these systems unclear. Here, we use scanning superconducting quantum interference device microscopy to study magnetic domains in V-doped (Bi,Sb)$_2$Te$_3$ exhibiting a quantum anomalous Hall effect with precise quantization. By imaging stray magnetic fields as a function of applied field, we map the formation and evolution of domains through magnetic reversal. We reconstruct the magnetization configuration underlying the measured stray field and find that magnetic domains and crystallographic grains are of similar size. Moreover, magnetic reversal is found to occur through domain expansion, typical of ferromagnets, rather than through nucleation at random sites. Our measurements thus reveal a coexistence of both local magnetic interactions within crystallographic grains and long-range ferromagnetic coupling between grains. This behavior in V-doped (Bi,Sb)$_2$Te$_3$ is markedly distinct from that previously reported for Cr-doped (Bi,Sb)$_2$Te$_3$.

cond-mat.mtrl-sci↗

arXiv2025

Advanced SQUID-on-lever scanning probe for high-sensitivity magnetic microscopy with sub-100-nm spatial resolution

Superconducting quantum interference devices (SQUIDs) are exceptionally sensitive magnetometers capable of detecting weak magnetic fields. Miniaturizing these devices and integrating them onto scanning probes enables high-resolution imaging at low-temperature. Here, we fabricate nanometer-scale niobium SQUIDs with inner-loop sizes down to 10 nm at the apex of individual planar silicon cantilevers via a combination of wafer-scale optical lithography and focused-ion-beam (FIB) milling. These robust SQUID-on-lever probes overcome many of the limitations of existing devices, achieving spatial resolution better than 100 nm, magnetic flux sensitivity of $0.3~\mu\Phi_0/\sqrt{\rm{Hz}}$, and operation in magnetic fields up to about 0.5 T at 4.2 K. Nanopatterning via Ne- or He-FIB allows for the incorporation of a modulation line for coupling magnetic flux into the SQUID or a third Josephson junction for shifting its phase. Such advanced functionality, combined with high spatial resolution, large magnetic field range, and the ease of use of a cantilever-based scanning probe, extends the applicability of scanning SQUID microscopy to a wide range of magnetic, normal conducting, superconducting, and quantum Hall systems. We demonstrate magnetic imaging of skyrmions at the surface of bulk Cu$_2$OSeO$_3$. Analysis of the point spread function determined from imaging a single skyrmion yields a full-width-half-maximum of 87 nm. Moreover, we image modulated magnetization patterns with a period of 65 nm.

cond-mat.supr-con↗

arXiv2024

Simulation and measurement of stray fields for the manipulation of spin-qubits in one- and two-dimensional arrays

The inhomogeneous magnetic stray field of micromagnets has been extensively used to manipulate electron spin qubits. By means of micromagnetic simulations and scanning superconducting quantum interference device microscopy, we show that the polycrystallinity of the magnet and non-uniform magnetization significantly impact the stray field and corresponding qubit properties. We find that the random orientation of the crystal axis in polycrystalline Co magnets alters the qubit frequencies by up to 0.5 GHz, compromising single qubit addressability and single gate fidelities. We map the stray field of Fe micromagnets with an applied magnetic field of up to 500 mT (mimicking conditions when operating qubits), finding field gradients above 1 mT/nm. The measured gradients and the lower magnetocrystalline anisotropy of Fe demonstrate the advantage of using Fe instead of Co for magnets in spin qubit devices. These properties of Fe also enabled us to design a 2D arrangement of nanomagnets for driving spin qubits distributed on a 2D lattice.

cond-mat.mes-hall↗

arXiv2024

Imaging strain-controlled magnetic reversal in thin CrSBr

Two-dimensional materials are extraordinarily sensitive to external stimuli, making them ideal for studying fundamental properties and for engineering devices with new functionalities. One such stimulus, strain, affects the magnetic properties of the layered magnetic semiconductor CrSBr to such a degree that it can induce a reversible antiferromagnetic-to-ferromagnetic phase transition. Given the pervasiveness of non-uniform strain in exfoliated two-dimensional magnets, it is crucial to understand its impact on their magnetic behavior. Using scanning SQUID-on-lever microscopy, we directly image the effects of spatially inhomogeneous strain on the magnetization of layered CrSBr as it is polarized by a field applied along its easy axis. The evolution of this magnetization and the formation of domains is reproduced by a micromagnetic model, which incorporates the spatially varying strain and the corresponding changes in the local interlayer exchange stiffness. The observed sensitivity to small strain gradients along with similar images of a nominally unstrained CrSBr sample suggest that unintentional strain inhomogeneity influences the magnetic behavior of exfoliated samples and must be considered in the design of future devices.

cond-mat.mes-hall↗

arXiv2023

Visualizing thickness-dependent magnetic textures in few-layer $\text{Cr}_2\text{Ge}_2\text{Te}_6$

Magnetic ordering in two-dimensional (2D) materials has recently emerged as a promising platform for data storage, computing, and sensing. To advance these developments, it is vital to gain a detailed understanding of how the magnetic order evolves on the nanometer-scale as a function of the number of atomic layers and applied magnetic field. Here, we image few-layer $\text{Cr}_2\text{Ge}_2\text{Te}_6$ using a combined scanning superconducting quantum interference device and atomic force microscopy probe. Maps of the material's stray magnetic field as a function of applied magnetic field reveal its magnetization per layer as well as the thickness-dependent magnetic texture. Using a micromagnetic model, we correlate measured stray-field patterns with the underlying magnetization configurations, including labyrinth domains and skyrmionic bubbles. Comparison between real-space images and simulations demonstrates that the layer dependence of the material's magnetic texture is a result of the thickness-dependent balance between crystalline and shape anisotropy. These findings represent an important step towards 2D spintronic devices with engineered spin configurations and controlled dependence on external magnetic fields.

cond-mat.mes-hall↗