arXiv subjects

Daniel L. Creedon

Publications and source records attributed to Daniel L. Creedon.

At least 19 recordsLinked to original sources

arXiv2026

High-field Magnetotransport Studies of Surface Conducting Diamonds

The observation of strong and tunable spin-orbit interaction (SOI) in surface conducting diamond opens up a new avenue for building diamond-based spintronics. Herein we provide a comprehensive method to analyze the magnetotransport behavior of surface conducting hydrogen-terminated diamond (H-diamond) Hall bar devices and Al/Al2O3/V2O5/H-diamond MOSFETs, respectively. By adopting a significantly improved theoretical magneto transport model, the reduced magnetoconductance can be accurately explained both within and outside the quantum diffusive regime. The model is valid for all doping strategies of surface conducting diamond tested. From this analysis, we find that the orbital magnetoresistance, a classical effect distinct from the SOI, dominates the magnetotransport in surface conducting diamond at high magnetic fields. Furthermore, local hole mobilities as high as 1000 ~ 3000 cm2/Vs have been observed in this work, indicating the possibility of diamond-based electronics with ultra-high hole mobilities at cryogenic temperatures.

cond-mat.mtrl-sci↗

arXiv2026

Electrically detected magnetic resonance of $^{75}$As magnetic clock transitions in silicon

Magnetic clock transitions (CTs), defined by vanishing first-order sensitivity of the transition frequency to magnetic field fluctuations, provide a powerful route to suppress decoherence in donor spin systems. Here, we present the observation of magnetic field CTs from an ensemble of near-surface $^{75}$As ($I = 3/2$) spins in silicon using low-field ($< 10$~mT) continuous-wave electrically detected magnetic resonance (EDMR). As the CT condition is approached, pronounced linewidth broadening is observed, consistent with a donor Hamiltonian informed linewidth model. These results establish low-field EDMR as a sensitive probe of CTs in near-surface donor systems relevant to silicon-based quantum devices.

quant-ph↗

arXiv2022

P-type Ohmic contact to monolayer WSe2 field-effect transistors using high electron affinity amorphous MoO3

1 School of Physics and Astronomy, Monash University, Clayton, Victoria 3800, Australia 2 Australian Research Council Centre of Excellence in Future Low-Energy Electronics Technologies (FLEET), Monash University, Clayton, Victoria 3800, Australia 3 Department of Mechanical Engineering, Columbia University, New York, New York 10027, United States 4 Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027, United States 5 School of Physics, the University of Melbourne, Melbourne, VIC 3010, Australia 6 Research Center for Functional Materials, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan 7 International Center for Materials Nanoarchitectonics, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan 8 School of Physics, University of New South Wales, 2052 Sydney, Australia 9 Center of Condensed Matter Sciences and Center of Atomic Initiative for New Material, National Taiwan University, Taipei 106, Taiwan 10 Monash Centre for Atomically Thin Materials, Monash University, Clayton, 3800, VIC, Australia

cond-mat.mes-hall↗

arXiv2019

Imaging graphene field-effect transistors on diamond using nitrogen-vacancy microscopy

The application of imaging techniques based on ensembles of nitrogen-vacancy (NV) sensors in diamond to characterise electrical devices has been proposed, but the compatibility of NV sensing with operational gated devices remains largely unexplored. Here we fabricate graphene field-effect transistors (GFETs) directly on the diamond surface and characterise them via NV microscopy. The current density within the gated graphene is reconstructed from NV magnetometry under both mostly p- and n-type doping, but the exact doping level is found to be affected by the measurements. Additionally, we observe a surprisingly large modulation of the electric field at the diamond surface under an applied gate potential, seen in NV photoluminescence and NV electrometry measurements, suggesting a complex electrostatic response of the oxide-graphene-diamond structure. Possible solutions to mitigate these effects are discussed.

cond-mat.mes-hall↗

arXiv2018

Low temperature properties of whispering gallery modes in isotopically pure silicon 28

Whispering Gallery (WG) mode resonators have been machined from a boule of single-crystal isotopically pure silicon-28. Before machining, the as-grown rod was measured in a cavity, with the best Bragg confined modes exhibiting microwave $Q$-factors on the order of a million for frequencies between 10 and 15 GHz. After machining the rod into smaller cylindrical WG mode resonators, the frequencies of the fundamental mode families were used to determine the relative permittivity of the material to be $11.488\pm0.024$ near 4 K, with the precision limited only by the dimensional accuracy of the resonator. However, the Q-factors were degraded by the machining to below $4\times10^4$. Raman spectroscopy was used to optimize post-machining surface treatments to restore high $Q$-factors. This is an enabling step for the use of such resonators for hybrid quantum systems and frequency conversion applications, as silicon-28 also has very low phonon losses, can host very narrow linewidth spin ensembles and is a material commonly used in optical applications.

cond-mat.mtrl-sci↗

arXiv2016

A 3D Printed Superconducting Aluminium Microwave Cavity

3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of applications in fields as diverse as customized medical implants, jet engine bearings, and rapid prototyping in the automotive industry. Whilst many techniques can be used for 3D printing metals, they commonly rely on computer controlled melting or sintering of a metal alloy powder using a laser or electron beam. The mechanical properties of parts produced in such a way have been well studied, but little attention has been paid to their electrical properties. Here we show that a microwave cavity (resonant frequencies 9.9 and 11.2 GHz) 3D printed using an Al-12Si alloy exhibits superconductivity when cooled below the critical temperature of aluminium (1.2 K), with a performance comparable to the common 6061 alloy of aluminium. Superconducting cavities find application in numerous areas of physics, from particle accelerators to cavity quantum electrodynamics experiments. The result is achieved even with a very large concentration of non-superconducting silicon in the alloy of 12.18%, compared to Al-6061, which has between 0.4 to 0.8%. Our results may pave the way for the possibility of 3D printing superconducting cavity configurations that are otherwise impossible to machine.

physics.ins-det↗

arXiv2015

Strong Coupling Between Whispering Gallery Photons and Spin States of Iron Group Impurity Ions

Interaction of Whispering Gallery Modes (WGM) with dilute spin ensembles in solids is an interesting paradigm of Hybrid Quantum Systems potentially beneficial for Quantum Signal Processing applications. In the present work, WGM spectroscopy of Rare-Earth doped YSO crystal reveals the existence of Iron Group Ion (IGI) co-dopings with concentration levels of order 100 ppb. The IGI spin ensembles demonstrate large Zero Field Splittings at 14.7GHz, 18.4GHz and 25.4GHz, considerable anisotropy of the \textrm{g}-tensors, as well as two inequivalent lattice sites. Strong coupling regimes between an ensemble of IGI spins and WGM photons have been demonstrated at $18.4$ GHz and near zero field. This approach together with useful optical properties of these ions opens a new avenue for 'spins-in-solids' Quantum Electrodynamics.

cond-mat.mes-hall↗

arXiv2014

Strong Coupling Between P1 Diamond Impurity Centres and 3D Lumped Photonic Microwave Cavity

We report strong coupling between an ensemble of N impurity (P1) centres in diamond and microwave photons using a unique double post re-entrant cavity. The cavity is designed so that the magnetic component of the cavity field is spatially separated from the electric component and focused into the small volume in which the diamond sample is mounted. The novelty of the structure simultaneously allows high magnetic filling factor (38.4\%) and low frequencies necessary to interact, at low magnetic field, with transitions in diamond such as those in NV$^{-}$ and P1 centres. Coupling strength (or normal-mode splitting) of 51.42 MHz, was achieved with P1 centres at 6.18 GHz and 220 mT in a centimetre-scale cavity, with a corresponding cooperativity factor of 4.7. This technique offers an alternative way, with some significant advantages, to couple 3D cavities to transitions in diamond and achieve the strong coupling necessary for applications to quantum information processing.

cond-mat.mes-hall↗

arXiv2014

Hyperparametric effects in a whispering-gallery mode rutile dielectric resonator at liquid helium temperatures

We report the first observation of low power drive level sensitivity, hyperparametric amplification, and single-mode hyperparametric oscillations in a dielectric rutile whispering-gallery mode resonator at 4.2 K. The latter gives rise to a comb of sidebands at 19.756 GHz. Whereas, most frequency combs in the literature have been observed in optical systems using an ensemble of equally spaced modes in microresonators or fibers, the present work represents generation of a frequency comb using only a single-mode. The experimental observations are explained by an additional 1/2 degree-of-freedom originating from an intrinsic material nonlinearity at optical frequencies, which affects the microwave properties due to the extremely low loss of rutile. Using a model based on lumped circuits, we demonstrate that the resonance between the photonic and material 1/2 degree-of-freedom, is responsible for the hyperparametric energy transfer in the system.

quant-ph↗

arXiv2014

High Cooperativity Cavity QED with Magnons at Microwave Frequencies

Using a sub-millimetre sized YIG (Yttrium Iron Garnet) sphere mounted in a magnetic field-focusing cavity, we demonstrate an ultra-high cooperativity of $10^5$ between magnon and photon modes at millikelvin temperatures and microwave frequencies. The cavity is designed to act as a magnetic dipole by using a novel multiple-post approach, effectively focusing the cavity magnetic field within the YIG crystal with a filling factor of 3%. Coupling strength (normal-mode splitting) of 2 GHz, (equivalent to 76 cavity linewidths or $0.3$ Hz per spin), is achieved for a bright cavity mode that constitutes about 10% of the photon energy and shows that ultra-strong coupling is possible in spin systems at microwave frequencies. With straight forward optimisations we demonstrate that with that this system has the potential to reach cooperativities of $10^7$, corresponding to a normal mode splitting of 5.2 GHz and a coupling per spin approaching 1 Hz. We also observe a three-mode strong coupling regime between a dark cavity mode and a magnon mode doublet pair, where the photon-magnon and magnon-magnon couplings (normal-mode splittings) are 143 MHz and 12.5 MHz respectively, with HWHM bandwidth of about 0.5 MHz.

quant-ph↗

arXiv2014

Strong Coupling between Whispering Gallery Modes and Chromium Ions in Ruby

We report the study of interactions between cavity photons and paramagnetic Cr$^{3+}$ spins in a ruby (Cr$^{3+}$:Al$_2$O$_3$) Whispering Gallery mode (WGM) resonator. Examining the system at microwave frequencies and millikelvin temperatures, spin-photon couplings up to 610 MHz or about 5% of photon energy are observed between the impurity spins and high quality factor ($Q > 10^5$) WGM. Large tunability and spin-spin interaction allows operation in the strong coupling regime. The system exhibits behaviour not predicted by the usual Tavis-Cummings model because of interactions within the two-level spin bath, and the existence of numerous photonic modes.

cond-mat.mtrl-sci↗

arXiv2014

Spin-Photon Interaction in a Cavity with Time-Reversal Symmetry Breaking

Employing a sapphire whispering gallery mode resonator, we demonstrate features of the spin-photon interaction in cavities with broken time-reflection symmetry. The broken symmetry leads to a lifting of the degeneracy between left-handed and right-handed polarised cavity photons, which results in an observable gyrotropic effect. In the high-$Q$ cavity limit, such a situation requires a modification of the Tavis-Cummings Hamiltonian to take into account conservation of spin angular momentum and the corresponding selection rules. As a result, the system is represented by a system of two linearly coupled bosonic modes, with each one coupled to its own sub-ensemble of two-level systems with different energy splittings. In the experimental example, these sub-ensembles originate from Fe$^{3+}$ impurity ions effectively seen as a two level systems at the interaction frequency. The temperature dependence of the population of each sub-ensemble (in terms of effective susceptibility of the medium) is determined experimentally in accordance with the theoretical predictions revealing various paramagnetic impurity types in the solid. The regimes of backscatterer and spin ensemble domination are discussed and compared.

quant-ph↗

arXiv2013

Controlling a whispering gallery doublet mode avoided frequency crossing: Strong coupling between photon bosonic and spin degrees of freedom

A combination of electron spin interactions in a magnetic field allows us to control the resonance frequencies of a high-Q Whispering Gallery (WG) cavity mode doublet, resulting in precise measurements of an avoided crossing between the two modes comprising the doublet. We show that the resonant photons effectively behave as spin--$\frac{1}{2}$ particles and that the physical origins of the doublet phenomenon arise from an energy splitting between the states of photon spin angular momentum. The exclusive role of the photon spin in splitting the mode frequency is emphasized, and we demonstrate that the gyrotropic and anisotropic properties of the crystalline media supporting the WG mode lead to strong coupling between the bosonic and spin degrees of freedom of cavity photons. Despite the demonstrated similarities with Jaynes-Cummings type systems, the mode doublet system exhibits a significant difference due to its linearity. Unlike traditional experiments dealing with interactions between fields and matter, here the crystalline medium plays a role of macroscopic symmetry breaking, assisting in the strong coupling between these photon degrees of freedom. Such a regime is demonstrated experimentally with a method to effectively control the photon spin state. Our experiments demonstrate for the first time, controllable time-reversal symmetry breaking in a high-$Q$ cavity.

quant-ph↗

arXiv2013

Ultrasensitive microwave spectroscopy of paramagnetic impurities of sapphire crystals at millikelvin temperatures

Progress in the emerging field of engineered quantum systems requires the development of devices that can act as quantum memories. The realisation of such devices by doping solid state cavities with paramagnetic ions imposes a trade-off between ion concentration and cavity coherence time. Here, we investigate an alternative approach involving interactions between photons and naturally occurring impurity ions in ultra-pure crystalline microwave cavities exhibiting exceptionally high quality factors. We implement a hybrid Whispering Gallery/Electron Spin Resonance method to perform rigorous spectroscopy of an undoped single-crystal sapphire resonator over the frequency range 8--19 GHz, and at external applied DC magnetic fields up to 0.9 T. Measurements of a high purity sapphire cooled close to 100 mK reveal the presence of Fe$^{3+}$, Cr$^{3+}$, and V$^{2+}$ impurities. A host of electron transitions are measured and identified, including the two-photon classically forbidden quadrupole transition ($Δm_s =2$) for Fe$^{3+}$, as well as hyperfine transitions of V$^{2+}$.

cond-mat.mtrl-sci↗

arXiv2013

Hybrid Electron Spin Resonance and Whispering Gallery Mode Resonance Spectroscopy of Fe3+ in Sapphire

The development of a new era of quantum devices requires an understanding of how paramagnetic dopants or impurity spins behave in crystal hosts. Here, we describe a new spectroscopic technique which uses traditional Electron Spin Resonance (ESR) combined with the measurement of a large population of electromagnetic Whispering Gallery (WG) modes. This allows the characterization of the physical parameters of paramagnetic impurity ions in the crystal at low temperatures. We present measurements of two ultra-high purity sapphires cooled to 20 mK in temperature, and determine the concentration of Fe3+ ions and their frequency sensitivity to a DC magnetic field. Our method is different to ESR in that it is possible to track the resonant frequency of the ion from zero applied magnetic field to any arbitrary value, allowing excellent measurement precision. This high precision reveals anisotropic behaviour of the Zeeman splitting, which has not been previously reported. In both crystals, each Zeeman component demonstrates a different g-factor.

cond-mat.mtrl-sci↗

arXiv2012

Frequency Conversion in a High Q-factor Sapphire Whispering Gallery Mode Resonator due to Paramagnetic Nonlinearity

Nonlinear frequency conversion is a well known and widely exploited family of effects in optics, often arising from a Kerr nonlinearity in a crystal medium. Here, we report high stability frequency conversion in the microwave regime due to a $χ^{(3)}$ nonlinearity in sapphire introduced by a dilute concentration of paramagnetic spins. First, we produce a high stability comb from two microwave fields at 12.029 and 12.037 GHz corresponding to two high $Q$-factor Whispering Gallery (WG) modes within the Electron Spin Resonance (ESR) bandwidth of the Fe$^{3+}$ ion. The resulting comb is generated by a cascaded four-wave mixing effect with a 7.7 MHz repetition rate. Then, by suppressing four-wave mixing by increasing the threshold power, third harmonic generation is achieved in a variety of WG modes coupled to various species of paramagnetic ion within the sapphire.

physics.optics↗

arXiv2012

Extremely Low-Loss Acoustic Phonons in a Quartz Bulk Acoustic Wave Resonator at Millikelvin Temperature

Low-loss, high frequency acoustic resonators cooled to millikelvin temperatures are a topic of great interest for application to hybrid quantum systems. When cooled to 20 mK, we show that resonant acoustic phonon modes in a Bulk Acoustic Wave (BAW) quartz resonator demonstrate exceptionally low loss (with $Q$-factors of order billions) at frequencies of 15.6 and 65.4 MHz, with a maximum $f.Q$ product of 7.8$\times10^{16}$ Hz. Given this result, we show that the $Q$-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained. Such resonators possess the low losses crucial for electromagnetic cooling to the phonon ground state, and the possibility of long coherence and interaction times of a few seconds, allowing multiple quantum gate operations.

physics.ins-det↗

arXiv2012

Controlling the Frequency-Temperature Sensitivity of a Cryogenic Sapphire Maser Frequency Standard by Manipulating Fe3+ Spins in the Sapphire Lattice

To create a stable signal from a cryogenic sapphire maser frequency standard, the frequency-temperature dependence of the supporting Whispering Gallery mode must be annulled. We report the ability to control this dependence by manipulating the paramagnetic susceptibility of Fe3+ ions in the sapphire lattice. We show that the maser signal depends on other Whispering Gallery modes tuned to the pump signal near 31 GHz, and the annulment point can be controlled to exist between 5 to 10 K depending on the Fe3+ ion concentration and the frequency of the pump. This level of control has not been achieved previously, and will allow improvements in the stability of such devices.

physics.ins-det↗