SearcharxivSearch

arXiv subjects

Daniel Oblak

Publications and source records attributed to Daniel Oblak.

At least 19 recordsLinked to original sources

Coherent microwave-to-optical transduction with Yb:YSO spins strongly coupled to a 3D resonator

Microwave-to-optical quantum transducers are essential for entangling remote superconducting qubits. Among the available transduction platforms, ensembles of Er$^{3+}$ and Yb$^{3+}$ ions doped into solids have emerged as leading candidates. While external magnetic fields are needed to split the Zeeman levels of erbium ions and enable a microwave--qubit interface, superconducting qubits suffer decoherence in such fields. In contrast, ytterbium ions exhibit zero-first-order Zeeman transitions and large hyperfine splittings at zero magnetic field (when doped into inorganic crystals). Owing to its long optical and spin coherence times, Yb:YSO has been widely used as a quantum memory, yet its potential for quantum transduction remains largely unexplored. Investigating this material could enable the integration of quantum memory and transduction in a single platform. Here, we demonstrate microwave-to-optical transduction in the continuous-wave regime using a 5\,ppm doped Yb:YSO crystal. The internal transduction efficiency is $2\times10^{-8}$ with a bandwidth of 200\,kHz, achieved using a 3D loop-gap microwave resonator (LGR) and a single-pass optical configuration. We explore all the ground states that form a V-type three-level system with the first and second optical excited states and assert the use of the ground state, which provides the highest efficiency and isolated optical transition. We further establish strong spin-microwave coupling from avoided crossing measurements. With a strong microwave drive to saturate the spin transition, we estimate the spin population pumped into the excited state, close to the simulated value. Finally, we calculate target parameter values for maximum efficiency with our system and suggest using 50\,ppm doped Yb:YSO crystal. With the calculated target parameters, the internal transduction efficiency is predicted to reach up to $10^{-4}$ in the current LGR.

quant-ph

Memory-assisted multimode microwave-to-optical transduction

Microwave-to-optical quantum transducers will enable coherent interconnection between distant superconducting quantum devices. Ongoing explorations with several platforms have shown promising results at single-photon levels. However, in all these demonstrations, elimination of noise due to the concurrence of the weak transduced signal with intense pump pulses remains a challenge, requiring high suppression filtering setups. A memory-assisted transducer, on the other hand, offers a versatile approach that not only mitigates the noise but also enables the on-demand retrieval of the transduced signal. Here, we integrate a quantum memory protocol with transduction in a three-level atomic system to demonstrate on-demand retrieval of transduced signals. Due to the zero-first-order Zeeman transitions at zero magnetic fields, providing long optical and spin coherence times, and GHz range hyperfine splitting, we use a low-doping concentration $^{171}{\rm Yb}^{3+}$:${\rm Y}_2{\rm SiO}_5$ crystal at 30\,mK temperature. We achieve on-demand transduction assisted by memory with $0.4\ (\text{and }0.3)$ noise photons in the detection window at a storage duration of $460\ (\text{and }620) \, \mu \textrm{s}$. To demonstrate the coherent nature of the protocol, we show interference patterns resulting from transduced signals due to varying phase or frequency of the input microwave pulses. Further, multimode transduction capacity is demonstrated, utilizing the spin and optical inhomogeneous broadening. The on-demand capability of the protocol allows synchronizing qubits in a quantum repeater protocol, while multimode capacity increases the entanglement generation rate. To the best of our knowledge, this is the first demonstration of an on-demand microwave-to-optical transducer assisted by memory.

quant-ph

Revisiting claims of extracranial biophoton detection from the human brain

Ultraweak photon emission, also referred to as biological autoluminescence or biophoton emission, is the spontaneous emission of extremely low levels of light from a broad range of biological systems. Recent studies have reported that UPE measured extracranially can serve as a potential non-invasive biomarker of brain activity. Here, we show that this interpretation suffers from serious problems. We show that, when observed under properly dark conditions, the UPE from the head is much weaker than what is reported in certain papers on 'brain UPE' from human heads. We also show that the large signals reported in these studies can be explained by background light contamination. Furthermore, photons with wavelengths < 600 nm are strongly attenuated by scalp and skull tissues, and longer wavelengths fall largely outside the effective spectral sensitivity of the photomultiplier tubes (PMTs) used. As a consequence, even if UPE from the head is detected under properly background-free conditions, it is likely to be dominated by emission from the scalp rather than from the brain, certainly as long as PMTs are used. Our results emphasize the importance of careful experimental design to make genuine progress on this important question.

physics.bio-ph

On-Demand Millisecond Storage of Spectro-Temporal Multimode Telecom Photons

The realization of scalable quantum networks for distribution of entanglement over long distances hinges on quantum repeaters. To outperform the exponential transmission loss in optical fibers, quantum repeaters must employ multiplexing schemes in the temporal, spectral, or spatial domain. The performance of such a multiplexed scheme is contingent on efficient quantum memories offering both extended storage times and large multimode capacities. Towards this goal, we experimentally demonstrate a memory platform operating at telecom wavelength using an Er$^{3+}$:Y$_{2}$SiO$_{5}$ crystal. We record on-demand storage and recall of weak coherent pulses for up to $1$ ms, exceeding by an order of magnitude that of previously reported demonstrations based on Er$^{3+}$. The memory exhibits an efficiency of 10.36 % at 300 $\mu$s storage time with a signal-to-noise ratio of $10.9$, mainly limited by spontaneous emission noise. We also store two spectral modes representing a frequency-bin encoding and retrieve the state with an overlap of 81.8 %. Furthermore, we demonstrate multimode capacity by simultaneously storing 20 temporal and 3 spectral modes with on-demand and selective recall capabilities, serving as a promising step toward a scalable quantum repeater architecture.

quant-ph

Quantum Optical Techniques for Biomedical Imaging

Quantum imaging is emerging as a transformative approach for biomedical applications, applying nonclassical properties of light, such as entanglement, squeezing, and quantum correlations, to overcome fundamental limits of conventional techniques. These methods promise superior spatial resolution, enhanced signal-to-noise ratios, improved phase sensitivity, and reduced radiation dose, for potentially safer and more precise imaging for delicate biological samples. Here, we present an overview of quantum optical biomedical imaging technologies as well as quantum-inspired imaging methods, including quantum optical coherence tomography, quantum optical microscopy, ghost imaging, multi-parameter quantum imaging, and imaging with quantum-grade cameras. We describe the operating principles, biomedical applications, and unique advantages of each approach, along with the specific challenges for their translation into real-life practice. This review aims to guide future research toward advancing quantum imaging from experimental demonstrations to impactful biomedical tools.

quant-ph

Ultra-narrow homogeneous linewidths of erbium-doped silica glass fibers at millikelvin temperatures: magnetic field and temperature dependence

Erbium-doped solids are promising candidates for fiber-based quantum networks due to their emission wavelength, which aligns with the telecom band over which optical fibers exhibit minimal loss. Among these, erbium-doped silica fiber (EDF) stands out for its availability, ease of use, and seamless integration with existing fiber-optic infrastructure. In this work, using the two-pulse photon-echo (2PPE) technique, we measured the homogeneous linewidth of the 4I13/2 <-> 4I15/2 optical transition under varying magnetic fields and temperatures. We observed an effective homogeneous linewidth of approximately 8 kHz at approximately 7mK at an optimal magnetic field of 0.09 T, representing over two orders of magnitude improvement compared to earlier reports measured at T = 700 mK. We also present a comprehensive model for the combined magnetic field and temperature dependency of the effective homogeneous linewidth. Additionally, we employed three-pulse photon-echo (3PPE) measurements to investigate spectral diffusion and decoherence processes, and conclude that Two-Level System (TLS) effects are significantly suppressed at sufficiently low temperatures, below approximately 100 mK.

quant-ph

Erbium-Doped Fibre Quantum Memory for Chip-Integrated Quantum-Dot Single Photons at 980 nm

The realization of long-distance quantum communication and the envisioned quantum internet relies on coherent hybrid light-matter interfaces connecting quantum light emitters with quantum memory (QM) systems. Unlike probabilistic photon pair sources such as spontaneous parametric down-conversion, deterministic quantum light emitters enable the on-demand production of pure and bright single and entangled photons, essential for scalable quantum networks. In this work, we present the first experimental realization of a coherent hybrid light-matter interface between a chip-integrated InAsP/InP nanowire quantum dot (QD) and a solid-state QM based on Er$^{3+}$ ions doped in a glass silica fiber (erbium-doped fiber, EDF). The emission spectrum of the InAsP/InP nanowire QD aligns with the absorption bandwidth of the EDF at 980 nm at cryogenic temperatures, allowing efficient interaction between the two systems. To demonstrate this, we present a spectroscopic characterization of the $^{4}I_{15/2} \leftrightarrow ^{4}I_{11/2}$ optical transition in EDF at 980 nm. Our measurements reveal substantial inhomogeneous broadening of this optical transition and a long spin population lifetime, underscoring EDFs potential for broadband QM implementation. We implement an 8 GHz bandwidth multimode QM based on the Atomic Frequency Comb protocol, enabling the storage and retrieval of 59 weak coherent pulses. Furthermore, we characterize single-photon emission from an InAsP/InP nanowire QD at 980 nm and demonstrate its deterministic storage and recall in the EDF QM. Notably, this is achieved without spectral tuning of the QD emission, demonstrating its direct compatibility with a solid-state QM.

quant-ph

Photonic quantum information with time-bins: Principles and applications

Long-range quantum communication, distributed quantum computing, and sensing applications require robust and reliable ways to encode transmitted quantum information. In this context, time-bin encoding has emerged as a promising candidate due to its resilience to mechanical and thermal perturbations, depolarization from refractive index changes, and birefringence in fiber optic media. Time-bin quantum bits (qubits) can be produced in various ways, and each implementation calls for different considerations regarding design parameters, component compatibility (optical, electrical, electro-optical), and measurement procedures. Here, we provide a comprehensive overview of experimental methods for preparing and characterizing time-bin qubits (TBQs) for quantum communication protocols, with an assessment of their advantages and limitations. We discuss challenges in transmitting TBQs over optical fibers and free-space channels, and methods to overcome them. We also analyze the selection of key time-bin parameters and component requirements across experiments. This leads us to explore the preparation and characterization of time-bin entanglement and examine requirements for interference of time-bins from separate sources. Further, we cover preparation and characterization techniques for high-dimensional time-bin states, namely qudits, and the generation of time-bin entangled qudit pairs. We review time-energy entanglement and key experimental realizations. Finally, we present notable applications of time-bin encoded quantum states, from quantum communication protocols to photonic quantum computation. This work serves as an accessible introduction and a comprehensive review of recent developments.

quant-ph

Multimode and Random-Access Optical Quantum Memory via Adiabatic Phase Imprinting

A photonic quantum memory capable of simultaneously storing multiple qubits and subsequently recalling any randomly selected subset of the qubits, is essential for large-scale quantum networking and computing. Such functionality, akin to classical Random-Access Memory (RAM), has proven difficult to implement due to the absence of a versatile random-access mechanism and limited multimode capacity in existing quantum memory protocols. A potential path to developing the quantum analog to RAM is offered by photon-echo protocols in rare-earth ion-doped materials, such as Revival Of Silenced Echo. These can utilize optical rephasing pulses to selectively read-out frequency multiplexed photonic qubits within an inhomogeneously broadened optical transition. However, the conventional non-adiabatic nature of the rephasing pulses requires intense, short-duration pulses, impeding their fidelity and multimode capacity. To address these critical limitations, we introduce an alternate protocol that employs Rapid Adiabatic Passage (RAP) rephasing pulses, to realize quantum memory, which invokes phase-imprints to suppress undesirable echoes. Using the optical transitions of a $^{171}{\rm Yb}^{3+}$:${\rm Y}_2{\rm SiO}_5$ crystal, we demonstrate the storage and retrieval of multiple intricate spectro-temporally photonic modes and achieve optical random access memory across eight distinct spectral modes. This protocol yields greatly enhanced mode-mapping versatility while substantially lowering the required rephasing pulse intensity, providing a more efficient and reliable approach for high-fidelity qubit storage and retrieval.

quant-ph

Hole burning experiments and modeling in erbium-doped silica glass fibers down to millikelvin temperatures: evidence for ultra-long population storage

We use spectral hole burning to investigate spin dynamics within the electronic Zeeman sublevels of the ground state of the erbium ions in erbium-doped fibers (EDF). Conducted at ultra-low temperatures and under varying magnetic fields, our study reveals distinct changes in spin relaxation dynamics across different conditions. We identified three decay components at approximately 7 mK, with one achieving spin lifetimes of over 9 hours under optimal conditions, while two components were observed at higher temperatures. The fairly stable relative weights of the decay components across conditions suggest distinct ion populations contributing to the observed relaxation dynamics. While earlier studies struggled to account for all decay components at higher temperatures, our approach successfully models spin dynamics across all observed decay components, using a consistent set of underlying mechanisms, including spin flip-flop interactions, direct coupling to two-level systems, and Raman-type processes, and distinguishes the decay components by the strengths with which these mechanisms contribute. These results suggest EDFs' potential as a promising candidate for quantum memory applications, with further room for optimization.

quant-ph

Estimating the impact of light pollution on quantum communication between QEYSSat and Canadian quantum ground station sites

Satellite to ground quantum communication typically operates at night to reduce background signals, however it remains susceptible to noise from light pollution of the night sky. In this study we compare several methodologies for determining whether a Quantum Ground Station (QGS) site is viable for exchanging quantum signals with the upcoming Quantum Encryption and Science Satellite (QEYSSat) mission. We conducted ground site characterization studies at three locations in Canada: Waterloo, Ontario, Calgary, Alberta, and Priddis, Alberta. Using different methods we estimate the background counts expected to leak into the satellite-ground quantum channel, and determined whether the noise levels could prevent a quantum key transfer. We also investigate how satellite data recorded from the Visible Infrared Imaging Radiometer Suite (VIIRS) can help estimate conditions of a particular site, and find reasonable agreement with the locally recorded data. Our results indicate that the Waterloo, Calgary, and Priddis QGS sites should allow both quantum uplinks and downlinks with QEYSSat, despite their proximity to urban centres. Furthermore, our approach allows the use of satellite borne instrument data (VIIRS) to remotely and efficiently determine the potential of a ground site.

quant-ph

Optical Investigations of Coherence and Relaxation Dynamics of a Thulium-doped Yttrium Gallium Garnet Crystal at sub-Kelvin Temperatures for Optical Quantum Memory

Rare-earth ion-doped crystals are of great interest for quantum memories, a central component in future quantum repeaters. To assess the promise of 1$\%$ Tm$^{3+}$-doped yttrium gallium garnet (Tm:YGG), we report measurements of optical coherence and energy-level lifetimes of its $^3$H$_6$ $\leftrightarrow$ $^3$H$_4$ transition at a temperature of around 500 mK and various magnetic fields. Using spectral hole burning, we find hyperfine ground-level (Zeeman level) lifetimes of several minutes at magnetic fields of less than 1000 G. We also measure coherence time exceeding one millisecond using two-pulse photon echoes. Three-pulse photon echo and spectral hole burning measurements reveal that due to spectral diffusion, the effective coherence time reduces to a few $\mu$s over a timescale of around two hundred seconds. Finally, temporal and frequency-multiplexed storage of optical pulses using the atomic frequency comb protocol is demonstrated. Our results suggest Tm:YGG to be promising for multiplexed photonic quantum memory for quantum repeaters.

quant-ph

Flexible polar encoding for information reconciliation in QKD

Quantum Key Distribution (QKD) enables two parties to establish a common secret key that is information-theoretically secure by transmitting random bits that are encoded as qubits and sent over a quantum channel, followed by classical information processing steps known as information reconciliation and key extraction. Transmission of information over a quantum channel introduces errors that are generally considered to be due to the adversary's tempering with the quantum channel and needs to be corrected using classical communication over an (authenticated) public channel. Commonly used error-correcting codes in the context of QKD include cascade codes, low-density parity check (LDPC) codes, and more recently polar codes. In this work, we explore the applicability of designing of a polar code encoder based on a channel reliability sequence. We show that the reliability sequence can be derived and used to design an encoder independent of the choice of decoder. We then implement our design and evaluate its performance against previous implementations of polar code encoders for QKD as well as other typical error-correcting codes. A key advantage of our approach is the modular design which decouples the encoder and decoder design and allows independent optimization of each. Our work leads to more versatile polar code-based error reconciliation in QKD systems that would result in deployment in a broader range of scenarios.

quant-ph

Towards a Realistic Model for Cavity-Enhanced Atomic Frequency Comb Quantum Memories

Atomic frequency comb (AFC) quantum memory is a favorable protocol in long distance quantum communication. Putting the AFC inside an asymmetric optical cavity enhances the storage efficiency but makes the measurement of the comb properties challenging. We develop a theoretical model for cavity-enhanced AFC quantum memory that includes the effects of dispersion, and show a close alignment of the model with our own experimental results. Providing semi quantitative agreement for estimating the efficiency and a good description of how the efficiency changes as a function of detuning, it also captures certain qualitative features of the experimental reflectivity. For comparison, we show that a theoretical model without dispersion fails dramatically to predict the correct efficiencies. Our model is a step forward to accurately estimating the created comb properties, such as the optical depth inside the cavity, and so being able to make precise predictions of the performance of the prepared cavity-enhanced AFC quantum memory.

quant-ph

Quantum storage of 1650 modes of single photons at telecom wavelength

To advance the full potential of quantum networks one should be able to distribute quantum resources over long distances at appreciable rates. As a consequence, all components in the networks need to have large multimode capacity to manipulate photonic quantum states. Towards this end, a multimode photonic quantum memory, especially one operating at telecom wavelength, remains a key challenge. Here we demonstrate a spectro-temporally multiplexed quantum memory at 1532 nm. Multimode quantum storage of telecom-band heralded single photons is realized by employing the atomic frequency comb protocol in a 10-m-long cryogenically cooled erbium doped silica fibre. The multiplexing encompasses five spectral channels - each 10 GHz wide - and in each of these up to 330 temporal modes, resulting in the simultaneous storage of 1650 modes of single photons. Our demonstrations open doors for high-rate quantum networks, which are essential for future quantum internet.

quant-ph

Picosecond synchronization system for quantum networks

The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.

quant-ph

Towards real-world quantum networks: a review

Quantum networks play an extremely important role in quantum information science, with application to quantum communication, computation, metrology and fundamental tests. One of the key challenges for implementing a quantum network is to distribute entangled flying qubits to spatially separated nodes, at which quantum interfaces or transducers map the entanglement onto stationary qubits. The stationary qubits at the separated nodes constitute quantum memories realized in matter while the flying qubits constitute quantum channels realized in photons. Dedicated efforts around the world for more than twenty years have resulted in both major theoretical and experimental progress towards entangling quantum nodes and ultimately building a global quantum network. Here, we review the development of quantum networks and the experimental progress over the past two decades leading to the current state of the art for generating entanglement of quantum nodes based on various physical systems such as single atoms, cold atomic ensembles, trapped ions, diamonds with Nitrogen-Vacancy centers, solid-state host doped with rare-earth ions, etc. Along the way we discuss the merits and compare the potential of each of these systems towards realizing a quantum network.

quant-ph

Are Brain-Computer Interfaces Feasible with Integrated Photonic Chips?

The present paper examines the viability of a radically novel idea for brain-computer interface (BCI), which could lead to novel technological, experimental and clinical applications. BCIs are computer-based systems that enable either one-way or two-way communication between a living brain and an external machine. BCIs read-out brain signals and transduce them into task commands, which are performed by a machine. In closed-loop, the machine can stimulate the brain with appropriate signals. In recent years, it has been shown that there is some ultraweak light emission from neurons within or close to the visible and near-infrared parts of the optical spectrum. Such ultraweak photon emission (UPE) reflects the cellular (and body) oxidative status, and compelling pieces of evidence are beginning to emerge that UPE may well play an informational role in neuronal functions. In fact, several experiments point to a direct correlation between UPE intensity and neural activity, oxidative reactions, EEG activity, cerebral blood flow, cerebral energy metabolism, and release of glutamate. Here, we propose a novel skull implant BCI that uses UPE. We suggest that a photonic integrated chip installed on the interior surface of the skull may enable a new form of extraction of the relevant features from the UPE signals. In the current technology landscape, photonic technologies advance rapidly and poised to overtake many electrical technologies, due to their unique advantages, such as miniaturization, high speed, low thermal effects, and large integration capacity that allow for high yield, volume manufacturing, and lower cost. For our proposed BCI, we make some major conjectures, which need to be experimentally verified, and hence we discuss the controversial parts, feasibility of technology and limitations, and potential impact of this envisaged technology if successfully implemented in the future.

q-bio.NC