arXiv subjects

Daniel Platz

Publications and source records attributed to Daniel Platz.

13 recordsLinked to original sources

arXiv2020

Surface acoustic wave coupling between micromechanical resonators

The coupling of micro- or nanomechanical resonators via a shared substrate is intensively exploited to built systems for fundamental studies and practical applications. So far, the focus has been on devices operating in the kHz regime with a spring-like coupling. At resonance frequencies above several 10 MHz, wave propagation in the solid substrate becomes relevant. The resonators act as sources for surface acoustic waves (SAWs) and it is unknown how this effects the coupling between them. Here, we present a model for MHz frequency resonators interacting by SAWs and derive the eigenfrequencies and quality factors of a pair of resonators for the symmetric and antisymmetric mode. Our results are in agreement with finite element method (FEM) simulations and show that in contrast to the well-known strain-induced spring-like coupling, the coupling via SAWs is not only dispersive but also dissipative. This can be exploited to realize high quality phonon cavities, an alternative to acoustic radiation shielding by, e.g. phononic crystals.

physics.app-ph↗

arXiv2014

Determining surface properties with bimodal and multimodal AFM

Conventional dynamic atomic force microscopy (AFM) can be extended to bimodal and multimodal AFM in which the cantilever is simultaneously excited at two ore more resonance frequencies. Such excitation schemes result in one additional amplitude and phase images for each driven resonance, and potentially convey more information about the surface under investigation. Here we present a theoretical basis for using this information to approximate the parameters of a tip-surface interaction model. The theory is verified by simulations with added noise corresponding to room-temperature measurements.

cond-mat.mes-hall↗

arXiv2013

Reconstruction of Tip-Surface Interactions with Multimodal Intermodulation Atomic Force Microscopy

We propose a theoretical framework for reconstructing tip-surface interactions using the intermodulation technique when more than one eigenmode is required to describe the cantilever motion. Two particular cases of bimodal motion are studied numerically: one bending and one torsional mode, and two bending modes. We demonstrate the possibility of accurate reconstruction of a two-dimensional conservative force field for the former case, while dissipative forces are studied for the latter.

cond-mat.mes-hall↗

arXiv2013

Simultaneous quantitative imaging of surface and magnetic forces

We demonstrate quantitative force imaging of long-range magnetic forces simultaneously with near-surface van-der-Waals and contact-mechanics forces using intermodulation atomic force microscopy. Magnetic forces at the 200 pN level are separated from near-surface forces at the 30 nN level. Imaging of these forces is performed in both the contact and non-contact regimes of near-surface interactions.

cond-mat.mes-hall↗

arXiv2013

Effect of material stiffness on intermodulation response in dynamic atomic force microscopy

We perform simulations and experiments on an oscillating atomic force microscope cantilever approaching a surface, where the intermodulation response of the cantilever driven with two pure harmonic tones is investigated. In the simulations, the tip and surface interact with a conservative nonlinear force, and the parameter space of approach distance and surface stiffness is explored. Approach experiments are carried out on three surfaces with widely varying stiffness. Qualitative similarities between simulations and experiment can be seen, but quantitative comparison is difficult due to the overly idealized tip-surface force model used in the simulation.

cond-mat.mes-hall↗

arXiv2013

Polynomial force approximations and multifrequency atomic force microscopy

We present polynomial force reconstruction from experimental intermodulation atomic force microscopy (ImAFM) data. We study the tip-surface force during a slow surface approach and compare the results with amplitude-dependence force spectroscopy. Based on polynomial force reconstruction we generate high-resolution surface property maps of polymer blend samples. The polynomial method is described as a special example of a more general approximataive force reconstruction, where the aim is to determine model parameters which best approximate the measured force spectrum. This approximative approach is not limited to spectral data and we demonstrate how is can adapted to a force quadrature picture.

cond-mat.mes-hall↗

arXiv2013

Interaction imaging with amplitude-dependence force spectroscopy

Knowledge of surface forces is the key to understanding a large number of processes in fields ranging from physics to material science and biology. The most common method to study surfaces is dynamic atomic force microscopy (AFM). Dynamic AFM has been enormously successful in imaging surface topography, even to atomic resolution, but the force between the AFM tip and the surface remains unknown during imaging. Here, we present a new approach that combines high accuracy force measurements and high resolution scanning. The method, called amplitude-dependence force spectroscopy (ADFS) is based on the amplitude-dependence of the cantilever's response near resonance and allows for separate determination of both conservative and dissipative tip-surface interactions. We use ADFS to quantitatively study and map the nano-mechanical interaction between the AFM tip and heterogeneous polymer surfaces. ADFS is compatible with commercial atomic force microscopes and we anticipate its wide-spread use in taking AFM toward quantitative microscopy.

cond-mat.mes-hall↗

arXiv2013

Interpreting motion and force for narrow-band intermodulation atomic force microscopy

Intermodulation atomic force microscopy (ImAFM) is a mode of dynamic atomic force microscopy that probes the nonlinear tip-surface force by measurement of the mixing of multiple tones in a frequency comb. A high $Q$ cantilever resonance and a suitable drive comb will result in tip motion described by a narrow-band frequency comb. We show by a separation of time scales, that such motion is equivalent to rapid oscillations at the cantilever resonance with a slow amplitude and phase or frequency modulation. With this time domain perspective we analyze single oscillation cycles in ImAFM to extract the Fourier components of the tip-surface force that are in-phase with tip motion ($F_I$) and quadrature to the motion ($F_Q$). Traditionally, these force components have been considered as a function of the static probe height only. Here we show that $F_I$ and $F_Q$ actually depend on both static probe height and oscillation amplitude. We demonstrate on simulated data how to reconstruct the amplitude dependence of $F_I$ and $F_Q$ from a single ImAFM measurement. Furthermore, we introduce ImAFM approach measurements with which we reconstruct the full amplitude and probe height dependence of the force components $F_I$ and $F_Q$, providing deeper insight into the tip-surface interaction. We demonstrate the capabilities of ImAFM approach measurements on a polystyrene polymer surface.

cond-mat.mes-hall↗

arXiv2013

Tip-surface interactions in dynamic atomic force microscopy

In atomic force microscopy (AFM) tip-surface interactions are usually considered as functions of the tip position only, so-called force curves. However, tip-surface interactions often depend on the tip velocity and the past tip trajectory. Here, we introduce a compact and general description of these interactions appropriate to dynamic AFM where the measurement of force is restricted to a narrow frequency band. We represent the tip-surface interaction in terms of a force disk in the phase space of position and velocity. Determination of the amplitude dependence of tip-surface forces at a fixed static probe height allows for a comprehensive treatment of conservative and dissipative interactions. We illuminate the fundamental limitations of force reconstruction with narrow band dynamic AFM and we show how the amplitude dependence of the Fourier component of the force at the tip oscillation frequency, gives qualitative insight into the detailed nature of the tip-surface interaction. With minimal assumptions this amplitude dependence force spectroscopy allows for a quantitative reconstruction of the effective conservative tip-surface force as well as a position-dependent damping factor. We demonstrate this reconstruction on simulated intermodulation AFM data.

cond-mat.mes-hall↗

arXiv2012

The Role of Nonlinear Dynamics in Quantitative Atomic Force Microscopy

Various methods of force measurement with the Atomic Force Microscope (AFM) are compared for their ability to accurately determine the tip-surface force from analysis of the nonlinear cantilever motion. It is explained how intermodulation, or the frequency mixing of multiple drive tones by the nonlinear tip-surface force, can be used to concentrate the nonlinear motion in a narrow band of frequency near the cantilevers fundamental resonance, where accuracy and sensitivity of force measurement are greatest. Two different methods for reconstructing tip-surface forces from intermodulation spectra are explained. The reconstruction of both conservative and dissipative tip-surface interactions from intermodulation spectra are demonstrated on simulated data.

cond-mat.mes-hall↗

arXiv2010

The Intermodulation Lockin Analyzer

Nonlinear systems can be probed by driving them with two or more pure tones while measuring the intermodulation products of the drive tones in the response. We describe a digital lock-in analyzer which is designed explicitly for this purpose. The analyzer is implemented on a field-programmable gate array, providing speed in analysis, real-time feedback and stability in operation. The use of the analyzer is demonstrated for Intermodulation Atomic Force Microscopy. A generalization of the intermodulation spectral technique to arbitrary drive waveforms is discussed.

physics.ins-det↗

arXiv2010

Reconstructing nonlinearities with intermodulation spectroscopy

We describe a method of analysis which allows for reconstructing the nonlinear disturbance of a high Q harmonic oscillator. When the oscillator is driven with two or more frequencies, the nonlinearity causes intermodulation of the drives, resulting in a complicated spectral response. Analysis of this spectrum allows one to approximate the nonlinearity. The method, which is generally applicable to measurements based on resonant detection, increases the information content of the measurement without requiring large detection bandwidth, and optimally uses the enhanced sensitivity near resonance to extract information and minimize error due to detector noise.

cond-mat.mes-hall↗

arXiv2009

Phase imaging with intermodulation atomic force microscopy

Intermodulation atomic force microscopy (IMAFM) is a dynamic mode of atomic force microscopy (AFM) with two-tone excitation. The oscillating AFM cantilever in close proximity to a surface experiences the nonlinear tip-sample force which mixes the drive tones and generates new frequency components in the cantilever response known as intermodulation products (IMPs). We present a procedure for extracting the phase at each IMP and demonstrate phase images made by recording this phase while scanning. Amplitude and phase images at intermodulation frequencies exhibit enhanced topographic and material contrast.

cond-mat.mes-hall↗