arXiv subjects

Daniel Rouan

Publications and source records attributed to Daniel Rouan.

At least 37 records · Page 2Linked to original sources

arXiv2023

Single-aperture spectro-interferometry in the visible at the Subaru telescope with FIRST: First on-sky demonstration on Keho'oea (α Lyrae) and Hokulei (α Aurigae)

FIRST is a spectro-interferometer combining, in the visible, the techniques of aperture masking and spatial filtering thanks to single-mode fibers. This instrument aims to deliver high contrast capabilities at spatial resolutions that are inaccessible to classical coronagraphic instruments. The technique implemented is called pupil remapping: the telescope is divided into subpupils by a segmented deformable mirror conjugated to a micro-lens array injecting light into single-mode fibers. The fiber outputs are rearranged in a nonredundant configuration, allowing simultaneous measurement of all baseline fringe patterns. The fringes are also spectrally dispersed, increasing the coherence length and providing precious spectral information. The optical setup of the instrument has been adapted to fit onto the SCExAO platform at the Subaru Telescope. We present the first on-sky demonstration of the FIRST instrument at the Subaru telescope. We used eight subapertures, each with a diameter of about 1 m. Closure phase measurements were extracted from the interference pattern to provide spatial information on the target. We tested the instrument on two types of targets : a point source (Keho'oea) and a binary system (Hokulei). An average accuracy of 0.6 degree is achieved on the closure phase measurements of Keho'oea, with a statistical error of about 0.15 degree at best. We estimate that the instrument can be sensitive to structures down to a quarter of the telescope spatial resolution. We measured the relative positions of Hokulei Aa and Ab with an accuracy about 1 mas. FIRST opens new observing capabilities in the visible wavelength range at the Subaru Telescope. With SCExAO being a testing platform for high contrast imaging instrumentation for future 30-meter class telescopes, FIRST is an important stepping stone for future interferometric instrumentation on extremely large telescopes.

astro-ph.IM↗

arXiv2021

Revealing asymmetrical dust distribution in the inner regions of HD 141569

We obtained polarimetric differential imaging of a gas-rich debris disk around HD 141569A with SPHERE in the H-band to compare the scattering properties of the innermost ring at 44 au with former observations in total intensity with the same instrument. In polarimetric imaging, we observed that the intensity of the ring peaks in the south-east, mostly in the forward direction, whereas in total intensity imaging, the ring is detected only at the south. This noticeable characteristic suggests a non-uniform dust density in the ring. We implemented a density function varying azimuthally along the ring and generated synthetic images both in polarimetry and in total intensity, which are then compared to the actual data. We find that the dust density peaks in the south-west at an azimuthal angle of $220^{\circ} \sim 238^{\circ}$ with a rather broad width of $61^{\circ} \sim 127^{\circ}$. Although there are still uncertainties that remain in the determination of the anisotropic scattering factor, the implementation of an azimuthal density variation to fit the data proved to be robust. Upon elaborating on the origin of this dust density distribution, we conclude that it could be the result of a massive collision when we account for the effect of the high gas mass that is present in the system on the dynamics of grains. Using the outcome of this modelization, we further measured the polarized scattering phase function for the observed scattering angle between 33$^{\circ}$ and 147$^{\circ}$ as well as the spectral reflectance of the southern part of the ring between 0.98 $μ$m and 2.1 $μ$m. We tentatively derived the grain properties by comparing these quantities with MCFOST models and assuming Mie scattering. Our preliminary interpretation indicates a mixture of porous sub-micron sized astro-silicate and carbonaceous grains.

astro-ph.EP↗

arXiv2021

The hot dust in the heart of NGC 1068's torus: A 3D radiative model constrained with GRAVITY/VLTi

The central region of NGC 1068 is one of the closest and most studied Active Galactic Nucleus. It is known to be of type 2, meaning that its accretion disk is obscured by a large amount of dust and gas. The main properties of the obscuring structure are still to be determined. We model the inner edge of this structure, where the hot dust responsible for the near-infrared emission reaches its sublimation temperature. At first, we use simple geometrical models in image reconstructions to determine the main 2D geometrical properties of the source. In a second step, we try to reproduce the observables with K-band images produced by 3D radiative transfer simulations of a heated dusty disk. We explore various parameters to find an optimal solution and a model consistent with all the observables. The three methods indicate an elongated structure with 4 x 6 mas dimensions and its major axis along the NW/SE direction. All three of them suggest that the object looks like an elongated ring rather than an elongated thin disk, with its northeast edge less luminous than the South-West one. The best 3D model is a thick disk with an inner radius r=0.21 +/- 0.03 pc and a half-opening angle $α_{1/2}=21\pm8\degree$ observed with an inclination $i=44_{-6}^{10}$\,$\degree$ and $PA=150_{-13}^{8}$\,$\degree$. A high density of dust $n=5_{-2.5}^{+5}\ M_{\odot}.pc^{-3}$ is required to explain the contrast between the two edges by self-absorption from the closer one. The overall structure is obscured by a large foreground obscuration $A_V \sim 75$. The hot dust is not responsible for the obscuration of the central engine. The geometry and the orientation of the structure are different from those of the previously observed maser and molecular disks. A single disk is unable to account for these differences, and we favor a description of the source where multiple rings are entangled around the central mass.

astro-ph.GA↗

arXiv2020

FIRST, a Pupil-Remapping Fiber Interferometer at the Subaru Telescope: on-sky results

FIRST, the Fibered Imager foR a Single Telescope, is a spectro-imager using single-mode fibers for pupil remapping, allowing measurements beyond the telescope diffraction limit. Integrated on the Subaru Coronagraphic Extreme Adaptive Optics instrument at the Subaru Telescope, it benefits from a very stable visible light wavefront allowing to acquire long exposure and operate on significantly fainter sources than previously possible. On-sky results demonstrated the ability of the instrument to detect stellar companions separated 43mas in the case of the Capella binary system. A similar approach on an extremely large telescope would offer unique scientific opportunities for companion detection and characterization at very high angular resolution.

astro-ph.IM↗

arXiv2020

Capabilities of a fibered imager on an extremely large telescope

FIRST, the Fibered Imager foR a Single Telescope instrument, is an ultra-high angular resolution spectro-imager, able to deliver calibrated images and measurements beyond the telescope diffraction limit, a regime that is out of reach for conventional AO imaging. FIRST achieves sensitivity and accuracy by coupling the full telescope to an array of single mode fibers. Interferometric fringes are spectrally dispersed and imaged on an EMCCD. An 18-Fiber FIRST setup is currently installed on the Subaru Coronographic Extreme Adaptive Optics instrument at Subaru telescope. It is being exploited for binary star system study. In the late 2020 it will be upgraded with delay lines and an active LiNb03 photonic beam-combining chip allowing phase modulation to nanometer accuracy at MHz. On-sky results at Subaru Telescope have demonstrated that, thanks to the ExAO system stabilizing the visible light wavefront, FIRST can acquire long exposure and operate on significantly fainter sources than previously possible. A similar approach on a larger telescope would therefore offer unique scientific opportunities for galactic (stellar physics, close companions) and extragalactic observations at ultra-high angular resolution. We also discuss potential design variations for nulling and high contrast imaging.

astro-ph.IM↗

arXiv2019

Key Technologies for the Wide Field Infrared Survey Telescope Coronagraph Instrument

The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures.

astro-ph.IM↗

arXiv2019

Stellar cusp and warm dust at the heart of NGC1068

Establishing precisely how stars and interstellar medium distribute within the central 100 pc area around an AGN, down to the pc scale, is key for understanding how the very final transfer of matter from kpc scale to the sub-parsec size of the accretion disc is achieved. Using AO-assisted (SPHERE-VLT) near-IR images in H and Ks and narrow-band of the Seyfert 2 galaxy NGC1068 we analyse the radial distribution of brightness in the central r < 100 pc area down to the pc scale. The median-averaged radial profiles are adjusted by a cusp (power-law) plus a central point-source. A simple radiative transfer model is used to interpret the data. We find that the fit of profiles beyond 10pc is done quite precisely at Ks by a cusp of exponent -2.0 plus a central point-source and by a cusp of exponent -1.2 at H. The difference between H and Ks can be explained by differential extinction, provided that the distribution of dust is itself cuspy as r^-1. However, the required stellar density follows a r^-4 cusp, much steeper than any other cusp theoretically predicted and the mass of the cluster is unreasonable, even introducing a segregation in the stellar population with an excess of giant stars inward. A much more acceptable solution is found with a K profile dominated by warm dust emission, while the H profile corresponds to a stellar cusp. NGC1068 is shown to satisfy a relationship between half-light radius, cusp luminosity and exponent which suggests that the cusp is the remnant of a recent starbust. We identify the central point-like source with the very hot dust at the internal wall of the putative torus and derive an intrinsic luminosity that requires an overall extinction AK ~ 8, a value consistent with predictions by several models.

astro-ph.GA↗

arXiv2018

Clumpiness of the interstellar medium in the central parsec of the Galaxy from H2 flux extinction correlation

The central parsec of the Galaxy contains a young star cluster embedded in a complex interstellar medium. The latter mainly consists of a torus of dense clumps and streams of molecular gas (the circumnuclear disk, CND) enclosing streamers of ionized gas (the Minispiral). In this complex environment, knowledge of the local extinction that locally affects each feature is crucial to properly study and disentangle them. We previously studied molecular gas in this region and inferred an extinction map from two H2 lines. Extinction appears to be correlated with the dereddened flux in several contiguous areas in the field of view. Here, we discuss the origin of this local correlation. We model the observed effect with a simple radiative transfer model. H2 emission arises from the surfaces of clumps (i.e., shells) that are exposed to the ambient ultraviolet (UV) radiation field. We consider the shell at the surface of an emitting clump. The shell has a varying optical depth and a screen of dust in front of it. The optical depth varies from one line of sight to another, either because of varying extinction coefficient from the shell of one clump to that of another or because of a varying number of identical clumps on the line of sight. In both scenarios, the model accurately reproduces the dependence of molecular gas emission and extinction. The reason for this correlation is that, in the central parsec, the molecular gas is mixed everywhere with dust that locally affects the observed gas emission. In addition, there is extinction due to foreground (screen) dust. This analysis favors a scenario where the central parsec is filled with clumps of dust and molecular gas. Separating foreground from local extinction allows for a probe for local conditions (H2 is mixed with dust) and can also constrain the three-dimensional (3D) position of objects under study.

astro-ph.GA↗

arXiv2017

Exploring the inner parsecs of Active Galactic Nuclei using near-infrared high resolution polarimetric simulations with MontAGN

Aims: In this paper, we aim to constrain the properties of dust structures in the central first parsecs of Active Galactic Nuclei (AGN). Our goal is to study the required optical depth and composition of different dusty and ionised structures. Methods: We developed a radiative transfer code, MontAGN, optimised for polarimetric observations in the infrared. With both this code and STOKES, designed to be relevant from the hard X-ray band to near-infrared wavelengths, we investigate the polarisation emerging from a characteristic model of the AGN environment. For that purpose, we compare predictions of our models with previous infrared observations of NGC 1068, and try to reproduce several key polarisation patterns revealed by polarisation mapping. Results: We constrain the required dust structures as well as their densities. More precisely, we find out that the electron density inside the ionisation cone is about $2.0 \times 10^9$ m$^{-3}$ . With structures constituted of spherical grains of constant density, we also highlight that the torus should be thicker than 20 in term of K band optical depth to block direct light from the centre. It should also have a stratification in density, with a lesser dense outer rim with an optical depth at 2.2 μm typically between 0.8 and 4 for observing the double scattering effect previously proposed. Conclusions: We bring constraints on the dust structures in the inner parsecs of an AGN model supposed to describe NGC 1068. When compared to observations, this leads to optical depth of at least 20 in Ks band for the torus of NGC 1068, corresponding to $τ_V \approx 170$, which is within the range of current estimation based on observations. In the future, we will improve our study by including non uniform dust structures and aligned elongated grains to constrain other possible interpretations of the observations.

astro-ph.GA↗

arXiv2016

Understanding active galactic nuclei using near-infrared high angular resolution polarimetry I : MontAGN - stokes comparison

In this first research note of a series of two, we present a comparison between two Monte Carlo radiative transfer codes: MontAGN and STOKES. Both were developed in order to better understand the observed polarisation of Active Galactic Nuclei (AGN). Our final aim is to use these radiative transfer codes to simulate the polarisation maps of a prototypical type-2 radio-quiet AGN on a wide range of wavelengths, from the infrared band with MontAGN to the X-ray energies with STOKES. Doing so, we aim to analyse in depth the recent SPHERE/IRDIS polarimetric observations conducted on NGC 1068. In order to validate the codes and obtain preliminary results, we set for both codes a common and simple AGN model, and compared their polaro-imaging results.

astro-ph.GA↗

arXiv2016

Hot molecular hydrogen in the central parsec of the Galaxy through near-infrared 3D fitting

Aims. We have investigated neutral gas in the central cavity of the circumnuclear disk (CND) at the Galactic Center, where the ionized minispiral lies, to describe the H2 distribution and properties in this ionized environment. Methods. This study was carried out through a spectro-imaging data cube of the central cavity obtained with SPIFFI on the VLT. The observed field of view is 36"x 29" , with a spectral resolution R = 1 300 in the near-infrared. These observations cover several H2 lines. To preserve the spatial resolution and avoid edge effects, we applied a new line-fitting method that consists of a regularized 3D fitting. We also applied a more classical 1D fitting to compare the relative strength of the H2 lines. Results. We present high spatial and spectral resolution maps of the intensity, velocity, and width of five H2 lines and an extinction map derived from H2. Molecular gas is detected everywhere in the field. In particular, in addition to the known CND features, we detected an emission from the northern arm cloud and from the minicavity. The excitation diagrams allow us to estimate the temperature, mass, and density of these features. Conclusions. We interpret the CND emission as coming from a hot, thermalized, thin layer at the surface of the clouds. The observed H2 corresponds only to a small fraction of the total H2 mass. The emission remains fairly strong in the whole central cavity, but it is not thermalized. A strong deviation from thermal equilibrium is detected near the minicavity. We suggest that this emission is caused by constantly forming H2 that is destroyed again before it reaches ortho/para equilibrium.

astro-ph.GA↗

arXiv2015

The Science Case for Multi-Object Spectroscopy on the European ELT

This White Paper presents the scientific motivations for a multi-object spectrograph (MOS) on the European Extremely Large Telescope (E-ELT). The MOS case draws on all fields of contemporary astronomy, from extra-solar planets, to the study of the halo of the Milky Way and its satellites, and from resolved stellar populations in nearby galaxies out to observations of the earliest 'first-light' structures in the partially-reionised Universe. The material presented here results from thorough discussions within the community over the past four years, building on the past competitive studies to agree a common strategy toward realising a MOS capability on the E-ELT. The cases have been distilled to a set of common requirements which will be used to define the MOSAIC instrument, entailing two observational modes ('high multiplex' and 'high definition'). When combined with the unprecedented sensitivity of the E-ELT, MOSAIC will be the world's leading MOS facility. In analysing the requirements we also identify a high-multiplex MOS for the longer-term plans for the E-ELT, with an even greater multiplex (>1000 targets) to enable studies of large-scale structures in the high-redshift Universe. Following the green light for the construction of the E-ELT the MOS community, structured through the MOSAIC consortium, is eager to realise a MOS on the E-ELT as soon as possible. We argue that several of the most compelling cases for ELT science, in highly competitive areas of modern astronomy, demand such a capability. For example, MOS observations in the early stages of E-ELT operations will be essential for follow-up of sources identified by the James Webb Space Telescope (JWST). In particular, multi-object adaptive optics and accurate sky subtraction with fibres have both recently been demonstrated on sky, making fast-track development of MOSAIC feasible.

astro-ph.GA↗

arXiv2014

Constraining physics of very hot super-Earths with the James Webb Telescope. The case of Corot-7b

Super-Earths with solid surfaces such CoRot-7b and Kepler-10b are expected to be extremely hot. It has been suggested that they must be atmosphere-free and that a lava ocean is present on their hot dayside. Here, we use several dedicated thermal models to study how observations with NIRSPEC on the JWST could further confirm and constrain, or reject the atmosphere-free lava ocean planet model for very hot super-Earths. Using CoRoT-7b as a working case, we explore the consequences on the phase-curve of a non tidal-locked rotation, with/without an atmosphere, and for different values of the albedo. We simulate future observations of the reflected light and thermal emission from CoRoT-7b with NIRSPEC-JWST and look for detectable signatures, such as time lag, as well as the possibility to retrieve the latitudinal surface temperature distribution. We demonstrate that we should be able to constrain several parameters after observations of two orbits (42 h) with a broad range of wavelengths: i)The Bond albedo is retrieved to within +/- 0.03 in most cases. ii) The lag effect allows us to retrieve the rotation period within 3 hours for a planet, with rotation half the orbital period. iii) Any spin period shorter than a limit in the range 30 - 800 h, depending on the thickness of the thermal layer in the soil, would be detected. iv) The presence of a thick gray atmosphere with a pressure of one bar, and a specific opacity higher than 1.0E-5 m-2 kg-1 is detectable. v) With spectra up to 4.5 mu, the latitudinal temperature profile can be retrieved to within 30 K with a risk of a totally wrong solution in 5 % of the cases. We conclude that it should thus be possible to distinguish the reference situation from other cases. Surface temperature map and the albedo brings important constraints on the nature or the physical state of the soil of hot super-Earths.

astro-ph.EP↗

arXiv2011

The orbital phases and secondary transit of Kepler-10b - A physical interpretation based on the Lava-ocean planet model -

The Kepler mission has made an important observation, the first detection of photons from a terrestrial planet by observing its phase curve (Kepler-10b). This opens a new field in exoplanet science: the possibility to get information about the atmosphere and surface of rocky planets, objects of prime interest. In this letter, we apply the Lava-ocean model to interpret the observed phase curve. The model, a planet with no atmosphere and a surface partially made of molten rocks, has been proposed for planets of the class of CoRoT-7b, i.e. rocky planets very close to their star (at few stellar radii). Kepler-10b is a typical member of this family. It predicts that the light from the planet has an important emission component in addition to the reflected one, even in the Kepler spectral band. Assuming an isotropical reflection of light by the planetary surface (Lambertian-like approximation), we find that a Bond albedo of \sim50% can account for the observed amplitude of the phase curve, as opposed to a first attempt where an unusually high value was found. We propose a physical process to explain this still large value of the albedo. The overall interpretation can be tested in the future with instruments as JWST or EChO. Our model predicts a spectral dependence that is clearly distinguishable from that of purely reflected light, and from that of a planet at a uniform temperature.

astro-ph.EP↗

arXiv2010

The SARS algorithm: detrending CoRoT light curves with Sysrem using simultaneous external parameters

Surveys for exoplanetary transits are usually limited not by photon noise but rather by the amount of red noise in their data. In particular, although the CoRoT spacebased survey data are being carefully scrutinized, significant new sources of systematic noises are still being discovered. Recently, a magnitude-dependant systematic effect was discovered in the CoRoT data by Mazeh & Guterman et al. and a phenomenological correction was proposed. Here we tie the observed effect a particular type of effect, and in the process generalize the popular Sysrem algorithm to include external parameters in a simultaneous solution with the unknown effects. We show that a post-processing scheme based on this algorithm performs well and indeed allows for the detection of new transit-like signals that were not previously detected.

astro-ph.EP↗

arXiv2009

Constraining the orbit of the possible companion to Beta Pictoris: New deep imaging observations

We recently reported on the detection of a possible planetary-mass companion to Beta Pictoris at a projected separation of 8 AU from the star, using data taken in November 2003 with NaCo, the adaptive-optics system installed on the Very Large Telescope UT4. Eventhough no second epoch detection was available, there are strong arguments to favor a gravitationally bound companion rather than a background object. If confirmed and located at a physical separation of 8 AU, this young, hot (~1500 K), massive Jovian companion (~8 Mjup) would be the closest planet to its star ever imaged, could be formed via core-accretion, and could explain the main morphological and dynamical properties of the dust disk. Our goal was to return to Beta Pic five years later to obtain a second-epoch observation of the companion or, in case of a non-detection, constrain its orbit. Deep adaptive-optics L'-band direct images of Beta Pic and Ks-band Four-Quadrant-Phase-Mask (4QPM) coronagraphic images were recorded with NaCo in January and February 2009. We also use 4QPM data taken in November 2004. No point-like signal with the brightness of the companion candidate (apparent magnitudes L'=11.2 or Ks ~ 12.5) is detected at projected distances down to 6.5 AU from the star in the 2009 data. As expected, the non-detection does not allow to rule out a background object; however, we show that it is consistent with the orbital motion of a bound companion that got closer to the star since first observed in 2003 and that is just emerging from behind the star at the present epoch. We place strong constraints on the possible orbits of the companion and discuss future observing prospects.

astro-ph.EP↗

arXiv2008

The achromatic chessboard, a new concept of phase shifter for Nulling Interferometry - I. theory

Direct detection of a planet around a star in the mid-IR, requires a nulling interferometer featuring an achromatic phase shift of pi on broad range. A new concept for designing such an achromatic phase shifter is presented here. The major interest of this solution is that it allows a simple design, with essentially one device per beam. The heart of the system consists in two cellular mirrors where each cell has a thickness introducing for the central wavelength, a phase shift of (2k+1)pi or of 2k pi on the fraction of the wave it reflects. Each mirror is put in one of the collimated beams of the interferometer. Because of the odd/even distribution, when recombining the two beams, a destructive interference is produced on axis for the central wavelength . If the distribution of cells thickness follows a rather simple law, based on the Pascal's triangle, then the nulling is also efficient for a wavelength not too far from the central wavelength. For instance, with two mirrors of 64x64 cells, one reaches a nulling of 1.e-6 on more than one complete octave. This could satisfy the specifications of space mission as Darwin. We also show the way to distribute the cells in the plane of the pupil for the optimum isolation of the planet image from the residual. We present the nulling performances of those various configurations.

astro-ph↗

arXiv2005

A dual emission mechanism in Sgr A*/L' ?

We have collected in 2004 adaptive optics corrected L' images of the Galactic Center region with NAOS-CONICA at VLT. A strong variability was observed as well as a correlation between the photocenter positions and fluxes of the L'-band counterpart of Sgr A*. It is interpreted as the combined emission of a point-like flaring source at the position of Sgr A*/IR itself and an extended dust structure, 75 mas south west of Sgr A*/IR, which we name Sgr A*-f. We examine the different possible mechanisms to explain this dual Sgr A* L' emission and conclude it is likely a flaring emission associated to energetic events in the close environment of the black hole plus a quiescent emission resulting from the collision of Sgr A*-f by a jet from Sgr A*.

astro-ph↗