arXiv subjects
Publications and source records attributed to Daniel S. Lobser.
The Quantum Scientific Computing Open User Testbed (QSCOUT) has developed a qubit-boson gate set for hybrid continuous-discrete variable (CV-DV) quantum computing. This document outlines how to utilize these gates on QSCOUT using Just Another Quantum Assembly Language, Jaqal\textsuperscript{TM}.
Highly-localized light-matter interactions are necessary for scaling trapped-ion architectures. In hyperfine qubits, counterpropagating beams generate entangling gates by coupling with motion, but this effect is undesirable during single-qubit operations. For that reason, single-qubit gates are traditionally implemented with copropagating beams, and the coexistence of two beam geometries adds hardware and computational overhead. In an effort towards collective performance improvement with minimal overhead, we design and implement pulse-amplitude and dephasing robust dynamically corrected gates using Space Curve Quantum Control (SCQC) and compare them against the constant-amplitude gate implementation. We perform gate set tomography on a four-qubit trapped-ion register, and we discover more than 50% error reduction when robust pulses are used. We find that counterpropagating robust gates often outperform their copropagating counterparts and reach error rates as low as $(3.59 \pm 1.25)\cdot 10^{-3}$, using diamond distance as a metric. This value establishes a laser-driven-gate error reference and is merely an order of magnitude higher than the best reported $\textit{microwave}$ gate on a $\textit{single}$ ion. Additional experiments reveal that robust pulses can effectively suppress non-Markovian errors that grow during runtime. Our work challenges the widely accepted belief that copropagating gates should be preferred for their weak motional coupling and invites the adoption of high-performance robust pulses that suppress multiple noise sources of the trapped-ion error budget.
We present an approach based on tensor networks for distributed quantum computing simulation of chemical wavepacket dynamics in a continuous variable representation. The central idea is that the tensor-network representation of the multidimensional time-evolution operator naturally induces an elevated Hilbert space where the dynamics decomposes into a set of independent lower-dimensional propagations. This transformation converts an entangled quantum evolution into a set of parallel computational tasks that can be executed asynchronously across heterogeneous quantum and classical computing architectures. The resulting formalism establishes a direct connection between tensor-network decompositions, uniformly controlled quantum circuits, and asynchronous distributed quantum computing. The approach is developed with a goal towards hybrid quantum/classical implementation, and is appropriate for a general heterogeneous mixture of quantum hardware systems. The experimental realization of the asynchronously distributed quantum processes that arise from the tensor-network decomposition are carried out on the Sandia National Laboratories' trapped-ion quantum computer, where the circuits are compiled using native partial-entangling $XX(θ)$ gates, reducing the expected two-qubit gate infidelity by more than 30\% relative to conventional fully entangling decompositions. We demonstrate the methodology by quantum computing the vibrational spectra of a small protonated water cluster that shows critical quantum nuclear behavior. Such water cluster systems have been found to be challenging for experimental action spectroscopy and for theory, and here, for the first time, we provide results for vibrational spectroscopy that are in agreement with the respective classical results to within 4cm$^{-1}$, thus allowing for the potential for spectroscopic accuracy from quantum computations.
Fault-tolerant quantum computing requires extremely precise knowledge and control of qubit dynamics during the application of a gate. We develop a data-driven learning protocol for characterizing quantum gates that builds off previous work on learning the Nakajima-Mori-Zwanzig (NMZ) formulation of open system dynamics from time series data, which allows detailed reconstruction of quantum evolution, including non-Markovian dynamics. We demonstrate this learning technique on three different systems: a simulation of a qubit whose dynamics are purely Markovian, a simulation of a driven qubit coupled to stochastic noise produced by an Ornstein-Uhlenbeck process, and trapped-ion experimental data of a driven qubit whose noise environment is not characterized ahead of time. Our technique is able to learn the generators of time evolution, or the NMZ operators, in all three cases and can learn the timescale in which the qubit dynamics can no longer be accurately described by a purely Markovian model. Our technique complements existing quantum gate characterization methods such as gate set tomography by explicitly capturing non-Markovianity in the gate generator, thus allowing for more thorough diagnosis of noise sources.
Continuously parameterized two-qubit gates are a key feature of state-of-the-art trapped-ion quantum processors as they have favorable error scalings and show distinct improvements in circuit performance over more restricted maximally entangling gatesets. In this work, we provide a comprehensive and pedagogical discussion on how to practically implement these continuously parameterized Mølmer-Sørensen gates on the Quantum Scientific Computing Open User Testbed (QSCOUT), a low-level trapped-ion processor. To generate the arbitrary entangling angles, $θ$, we simply scale the amplitude of light used to generate the entanglement. However, doing so requires careful consideration of amplifier saturation as well as the variable light shifts that result. As such, we describe a method to calibrate and cancel the dominant fourth-order effects, followed by a dynamic virtual phase advance during the gate to cancel any residual light shifts, and find a linear scaling between $θ$ and the residual light shift. Once, we have considered and calibrated these effects, we demonstrate performance improvement with decreasing $θ$. Finally, we describe nuances of hardware control to transform the XX-type interaction of the arbitrary-angle Mølmer-Sørensen gate into a phase-agnostic and crosstalk-mitigating ZZ interaction.
We explore the potential for hybrid development of quantum hardware where currently available quantum computers simulate open Cavity Quantum Electrodynamical (CQED) systems for applications in optical quantum communication, simulation and computing. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis-Cummings model containing N atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers: a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring N = 3 atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results can be used as a recipe for efficient and platform-specific quantum simulation of cavity-emitter systems on contemporary and future quantum computers.
Current noisy intermediate-scale quantum (NISQ) trapped-ion devices are subject to errors which can significantly impact the accuracy of calculations if left unchecked. A form of error mitigation called zero noise extrapolation (ZNE) can decrease an algorithm's sensitivity to these errors without increasing the number of required qubits. Here, we explore different methods for integrating this error mitigation technique into the Variational Quantum Eigensolver (VQE) algorithm for calculating the ground state of the HeH+ molecule at 0.8 Angstrom in the presence of realistic noise. Using the Quantum Scientific Computing Open User Testbed (QSCOUT) trapped-ion device, we test three methods of scaling noise for extrapolation: time-stretching the two-qubit gates, scaling the sideband amplitude parameter, and inserting two-qubit gate identity operations into the ansatz circuit. We find time-stretching and sideband amplitude scaling fail to scale the noise on our particular hardware in a way that can be directly extrapolated to zero noise. Scaling our noise with global gate identity insertions and extrapolating after variational optimization, we achieve an estimate of the ground state energy within -0.004 +- 0.04 Hartree; outside chemical accuracy, but greatly improved over our non-error-mitigated estimate with error 0.127 +- 0.008 Hartree. Our results show that the efficacy of this error mitigation technique depends on choosing the correct implementation for a given device architecture.
We demonstrate an order of magnitude reduction in the sensitivity to optical crosstalk for neighboring trapped-ion qubits during simultaneous single-qubit gates driven with individual addressing beams. Gates are implemented via two-photon Raman transitions, where crosstalk is mitigated by offsetting the drive frequencies for each qubit to avoid first-order crosstalk effects from inter-beam two-photon resonance. The technique is simple to implement, and we find that phase-dependent crosstalk due to optical interference is reduced on the most impacted neighbor from a maximal fractional rotation error of 0.185(4) without crosstalk mitigation to $\leq$ 0.006 with the mitigation strategy. Further, we characterize first-order crosstalk in the two-qubit gate and avoid the resulting rotation errors for the arbitrary-axis Mølmer-Sørensen gate via a phase-agnostic composite gate. Finally, we demonstrate holistic system performance by constructing a composite CNOT gate using the improved single-qubit gates and phase-agnostic two-qubit gate. This work is done on the Quantum Scientific Computing Open User Testbed (QSCOUT); however, our methods are widely applicable for individual-addressing Raman gates and impose no significant overhead, enabling immediate improvement for quantum processors that incorporate this technique.
Most near-term quantum information processing devices will not be capable of implementing quantum error correction and the associated logical quantum gate set. Instead, quantum circuits will be implemented directly using the physical native gate set of the device. These native gates often have a parameterization (e.g., rotation angles) which provide the ability to perform a continuous range of operations. Verification of the correct operation of these gates across the allowable range of parameters is important for gaining confidence in the reliability of these devices. In this work, we demonstrate a procedure for sample-efficient verification of continuously-parameterized quantum gates for small quantum processors of up to approximately 10 qubits. This procedure involves generating random sequences of randomly-parameterized layers of gates chosen from the native gate set of the device, and then stochastically compiling an approximate inverse to this sequence such that executing the full sequence on the device should leave the system near its initial state. We show that fidelity estimates made via this technique have a lower variance than fidelity estimates made via cross-entropy benchmarking. This provides an experimentally-relevant advantage in sample efficiency when estimating the fidelity loss to some desired precision. We describe the experimental realization of this technique using continuously-parameterized quantum gate sets on a trapped-ion quantum processor from Sandia QSCOUT and a superconducting quantum processor from IBM Q, and we demonstrate the sample efficiency advantage of this technique both numerically and experimentally.
Quantum computing testbeds exhibit high-fidelity quantum control over small collections of qubits, enabling performance of precise, repeatable operations followed by measurements. Currently, these noisy intermediate-scale devices can support a sufficient number of sequential operations prior to decoherence such that near term algorithms can be performed with proximate accuracy (like chemical accuracy for quantum chemistry). While the results of these algorithms are imperfect, these imperfections can help bootstrap quantum computer testbed development. Demonstrations of these algorithms over the past few years, coupled with the idea that imperfect algorithm performance can be caused by several dominant noise sources in the quantum processor, which can be measured and calibrated during algorithm execution or in post-processing, has led to the use of noise mitigation to improve computational results. Conversely, benchmark algorithms coupled with noise mitigation can help diagnose the nature of noise, whether systematic or purely random. Here, we outline the use of coherent noise mitigation techniques as a characterization tool in trapped-ion testbeds. We perform model-fitting of the noisy data to determine the noise source based on realistic noise models and demonstrate that systematic noise amplification coupled with error mitigation schemes provides useful data for noise model deduction. Further, in order to connect lower level noise model details with application specific performance of near term algorithms, we experimentally construct the loss landscape of a variational algorithm under various injected noise sources coupled with error mitigation techniques. This type of connection enables application-aware hardware codesign, in which the most important noise sources in specific applications, like quantum chemistry, become foci of improvement in subsequent hardware generations.
At Sandia National Laboratories, QSCOUT (the Quantum Scientific Computing Open User Testbed) is an ion-trap based quantum computer built for the purpose of allowing users low-level access to quantum hardware. Commands are executed on the hardware using Jaqal (Just Another Quantum Assembly Language), a programming language designed in-house to support the unique capabilities of QSCOUT. In this work, we describe a batching implementation of our custom software that speeds the experimental run-time through the reduction of communication and upload times. Reducing the code upload time during experimental runs improves system performance by mitigating the effects of drift. We demonstrate this implementation through a set of quantum chemistry experiments using a variational quantum eigensolver (VQE). While developed specifically for this testbed, this idea finds application across many similar experimental platforms that seek greater hardware control or reduced overhead.
The Quantum Scientific Computing Open User Testbed (QSCOUT) is a trapped-ion quantum computer testbed realized at Sandia National Laboratories on behalf of the Department of Energy's Office of Science and its Advanced Scientific Computing (ASCR) program. Here we describe Jaqal, for Just another quantum assembly language, the programming language we invented to specify programs executed on QSCOUT. Jaqal is useful beyond QSCOUT---it can support mutliple hardware targets because it offloads gate names and their pulse-sequence definitions to external files. We describe the capabilities of the Jaqal language, our approach in designing it, and the reasons for its creation. To learn more about QSCOUT, Jaqal, or JaqalPaq, the metaprogramming Python package we developed for Jaqal, please visit https://qscout.sandia.gov, https://gitlab.com/jaqal, or send an e-mail to qscout@sandia.gov.
QSCOUT is the Quantum Scientific Computing Open User Testbed, a trapped-ion quantum computer testbed realized at Sandia National Laboratories on behalf of the Department of Energy's Office of Science and its Advanced Scientific Computing (ASCR) program. Jaqal, for Just Another Quantum Assembly Language, is the programming language used to specify programs executed on QSCOUT. This document contains a specification of Jaqal along with a summary of QSCOUT 1.0 capabilities, example Jaqal programs, and plans for possible future extensions. To learn more about QSCOUT and the Jaqal language developed for it, please visit qscout.sandia.gov or send an e-mail to qscout@sandia.gov.