arXiv subjects

Daniel Sanchez-Portal

Publications and source records attributed to Daniel Sanchez-Portal.

35 records · Page 2Linked to original sources

arXiv2005

Role of the spin-orbit splitting and the dynamical fluctuations in the Si(557)-Au surface

Our it ab initio calculations show that spin-orbit coupling is crucial to understand the electronic structure of the Si(557)-Au surface. The spin-orbit splitting produces the two one-dimensional bands observed in photoemission, which were previously attributed to spin-charge separation in a Luttinger liquid. This spin splitting might have relevance for future device applications. We also show that the apparent Peierls-like transition observed in this surface by scanning tunneling microscopy is a result of the dynamical fluctuations of the step-edge structure, which are quenched as the temperature is decreased.

cond-mat.mtrl-sci↗

arXiv2004

Different origin of the ferromagnetic order in (Ga,Mn)As and (Ga,Mn)N

The mechanism for the ferromagnetic order of (Ga,Mn)As and (Ga,Mn)N is extensively studied over a vast range of Mn concentrations. We calculate the electronic structures of these materials using density functional theory in both the local spin density approximation and the LDA+U scheme, that we have now implemented in the code SIESTA. For (Ga,Mn)As, the LDA+U approach leads to a hole mediated picture of the ferromagnetism, with an exchange constant $Nβ$ =~ -2.8 eV. This is smaller than that obtained with LSDA, which overestimates the exchange coupling between Mn ions and the As $p$ holes. In contrast, the ferromagnetism in wurtzite (Ga,Mn)N is caused by the double-exchange mechanism, since a hole of strong $d$ character is found at the Fermi level in both the LSDA and the LDA+U approaches. In this case the coupling between the Mn ions decays rapidly with the Mn-Mn separation. This suggests a two phases picture of the ferromagnetic order in (Ga,Mn)N, with a robust ferromagnetic phase at large Mn concentration coexisting with a diluted weak ferromagnetic phase.

cond-mat.mtrl-sci↗

arXiv2002

Vibrational properties of single-wall nanotubes and monolayers of hexagonal BN

We report a detailed study of the vibrational properties of BN single-walled nanotubes and of the BN monolayer. Our results have been obtained from a well-established Tight-Binding model complemented with an electrostatic model to account for the long-range interactions arising from the polar nature of the material, and which are not included in the Tight-Binding model. Our study provides a wealth of data for the BN monolayer and nanotubes, such as phonon band structure, vibrational density of states, elastic constants, etc. For the nanotubes we obtain the behavior of the optically active modes as a function of the structural parameters, and we compare their frequencies with those derived from a zone-folding treatment applied to the phonon frequencies of the BN monolayer, finding general good agreement between the two.

cond-mat.mtrl-sci↗

arXiv2002

First principles study of the Si(557)-Au surface

We have performed a density functional study of fifteen different structural models of the Si(557)-Au surface reconstruction. Here we present a brief summary of the main structural trends obtained for the more favourable models, focusing afterwards in a detailed description of the atomic structure, electronic properties and, simulated STM images of the most stable model predicted by our calculations. This structure is in very good agreement with that recently proposed from X-ray diffraction measurements by Robinson et al. [Phys. Rev. Lett. 88, (2002) 096194].

cond-mat.mtrl-sci↗

arXiv2002

Van der Waals contribution to the inelastic atom-surface scattering

A calculation of the inelastic scattering rate of Xe atoms on Cu(111) is presented. We focus in the regimes of low and intermediate velocities, where the energy loss is mainly associated to the excitation electron-hole pairs in the substrate. We consider trajectories parallel to the surface and restrict ourselves to the Van der Waals contribution. The decay rate is calculated within a self-energy formulation. The effect of the response function of the substrate is studied by comparing the results obtained with two different approaches: the Specular Reflection Model and the Random Phase Approximation. In the latter, the surface is described by a finite slab and the wave functions are obtained from a one-dimensional model potential that describes the main features of the surface electronic structure while correctly retains the image-like asymptotic behaviour. We have also studied the influence of the surface state on the calculation, finding that it represents around 50% of the total probability of electron-hole pairs excitation.

cond-mat.mtrl-sci↗

arXiv2001

Calculation of the optical response of C60 and Na8 using time-dependent density functional theory and local orbitals

We report on a general method for the calculation of the frequency-dependent optical response of clusters based upon time-dependent density functional theory (TDDFT). The implementation is done using explicit propagation in the time domain and a self-consistent program that uses a linear combination of atomic orbitals (LCAO). Our actual calculations employ the SIESTA program, which is designed to be fast and accurate for large clusters. We use the adiabatic local density approximation to account for exchange and correlation effects. Results are presented for the imaginary part of the linear polarizability, Im [α(w)], and the dipole strength function, S(w), of C60 and Na8, compared to previous calculations and to experiment. We also show how to calculate the integrated frequency-dependent second order non-linear polarizability for the case of a step function electric field, γ_{step}(w), and present results for C60.

cond-mat.mtrl-sci↗

arXiv2001

Two distinct metallic bands associated with monatomic Au wires on the Si(557)-Au surface

The Si(557)-Au surface, containing monatomic Au wires parallel to the steps, has been proposed as an experimental realization of an ideal one-dimensional metal. In fact, recent photoemission experiments on this system (Nature 402, 504 (1999)) found two peaks that were interpreted in terms of the spin-charge separation in a Luttinger liquid. Our first-principles density functional calculations reveal two metallic bands associated with Au-Si bonds, instead of the single band expected from the Au 6s states, providing an alternative explanation for the experimental observations.

cond-mat.mtrl-sci↗

arXiv2001

Efficient index handling of multidimensional periodic boundary conditions

An efficient method is described to handle mesh indexes in multidimensional problems like numerical integration of partial differential equations, lattice model simulations, and determination of atomic neighbor lists. By creating an extended mesh, beyond the periodic unit cell, the stride in memory between equivalent pairs of mesh points is independent of their position within the cell. This allows to contract the mesh indexes of all dimensions into a single index, avoiding modulo and other implicit index operations.

cond-mat.mtrl-sci↗

arXiv2001

Numerical atomic orbitals for linear scaling

The performance of basis sets made of numerical atomic orbitals is explored in density-functional calculations of solids and molecules. With the aim of optimizing basis quality while maintaining strict localization of the orbitals, as needed for linear-scaling calculations, several schemes have been tried. The best performance is obtained for the basis sets generated according to a new scheme presented here, a flexibilization of previous proposals. The basis sets are tested versus converged plane-wave calculations on a significant variety of systems, including covalent, ionic and metallic. Satisfactory convergence (deviations significantly smaller than the accuracy of the underlying theory) is obtained for reasonably small basis sizes, with a clear improvement over previous schemes. The transferability of the obtained basis sets is tested in several cases and it is found to be satisfactory as well.

cond-mat.mtrl-sci↗

arXiv2000

First principles study of the adsorption of C60 on Si(111)

The adsorption of C60 on Si(111) has been studied by means of first-principles density functional calculations. A 2x2 adatom surface reconstruction was used to simulate the terraces of the 7x7 reconstruction. The structure of several possible adsorption configurations was optimized using the ab initio atomic forces, finding good candidates for two different adsorption states observed experimentally. While the C60 molecule remains closely spherical, the silicon substrate appears quite soft, especially the adatoms, which move substantially to form extra C-Si bonds, at the expense of breaking Si-Si bonds. The structural relaxation has a much larger effect on the adsorption energies, which strongly depend on the adsorption configuration, than on the charge transfer.

cond-mat.mtrl-sci↗

arXiv2000

Zigzag equilibrium structure in monatomic wires

We have applied first-principles density-functional calculations to the study of the energetics, and the elastic and electronic properties of monatomic wires of Au, Cu, K, and Ca in linear and a planar-zigzag geometries. For Cu and Au wires, the zigzag distortion is favorable even when the linear wire is stretched, but this is not observed for K and Ca wires. In all the cases, the equilibrium structure is an equilateral zigzag (bond angle of 60$^{\rm o}$). Only in the case of Au, the zigzag geometry can also be stabilized for an intermediate bond angle of 131$^{\rm o}$. The relationship between the bond and wire lengths is qualitatively different for the metallic (Au, Cu and, K) and semiconducting (Ca) wires.

cond-mat.mtrl-sci↗

arXiv1999

Density functional calculations of planar DNA base-pairs

We present a systematic Density Functional Theory (DFT) study of geometries and energies of the nucleic acid DNA bases (guanine, adenine, cytosine and thymine) and 30 different DNA base-pairs. We use a recently developed linear-scaling DFT scheme, which is specially suited for systems with large numbers of atoms. As a first step towards the study of large DNA systems, in this work: (i) We establish the reliability of the approximations of our method (including pseudopotentials and basis sets) for the description of the hydrogen-bonded base pairs, by comparing our results with those of former calculations. We show that the interaction energies at Hartree-Fock geometries are in very good agreement with those of second order Møller-Plesset (MP2) perturbation theory (the most accurate technique that can be applied at present for system of the sizes of the base-pairs). (ii) We perform DFT structural optimizations for the 30 different DNA base-pairs, only three of which had been previously studied with DFT. Our results provide information on the effect of correlation on the structure of the other 27 base pairs, for which only Hartree-Fock geometries were formerly available.

physics.chem-ph↗

arXiv1999

Energetics of the oxidation and opening of a carbon nanotube

We apply first principles calculations to study the opening of single-wall carbon nanotubes (SWNT's) by oxidation. We show that an oxygen rim can stabilize the edge of the open tube. The sublimation of CO$_2$ molecules from the rim with the subsequent closing of the tube changes from endothermic to exothermic as the tube radius increases, within the range of experimental feasible radii. We also obtain the energies for opening the tube at the cap and at the wall, the latter being significantly less favorable.

cond-mat.mtrl-sci↗

arXiv1999

Stiff monatomic gold wires with a spinning zigzag geometry

Using first principles density functional calculations, gold monatomic wires are found to exhibit a zigzag shape which remains under tension, becoming linear just before breaking. At room temperature they are found to spin, what explains the extremely long apparent interatomic distances shown by electron microscopy.The zigzag structure is stable if the tension is relieved, the wire holding its chainlike shape even as a free-standing cluster. This unexpected metallic-wire stiffness stems from the transverse quantization in the wire, as shown in a simple free electron model.

cond-mat.mtrl-sci↗

arXiv1999

Linear-scaling ab-initio calculations for large and complex systems

A brief review of the SIESTA project is presented in the context of linear-scaling density-functional methods for electronic-structure calculations and molecular-dynamics simulations of systems with a large number of atoms. Applications of the method to different systems are reviewed, including carbon nanotubes, gold nanostructures, adsorbates on silicon surfaces, and nucleic acids. Also, progress in atomic-orbital bases adapted to linear-scaling methodology is presented.

cond-mat.mtrl-sci↗

arXiv1995

Analysis of atomic-orbital basis sets from the projection of plane-wave results

The projection of the eigenfunctions obtained in standard plane-wave first-principle calculations is used for analyzing atomic-orbital basis sets. The "spilling" defining the error in such a projection allows the evaluation of the quality of an atomic-orbital basis set for a given system and its systematic variational optimization. The same projection allows obtaining the band structure and the Hamiltonian matrix elements in the previously optimized atomic basis. The spilling is shown to correlate with the mean square error in the energy bands, indicating that the basis optimization via spilling minimization is qualitatively equivalent to the energy-minimization scheme, but involves a much smaller computational effort. The spilling minimization also allows the optimization of bases for uses different than total-energy calculations, like the description of the band gap in semiconductors. The method is applied to the characterization of finite-range pseudo-atomic orbitals {[}O. F. Sankey and D. J. Niklewski, Phys. Rev. B {\bf 40}, 3979 (1989){]} in comparison to infinite-range pseudo-atomic and Slater-type orbitals. The bases are evaluated and optimized for several zincblende semiconductors and for aluminum. The quality of the finite-range orbitals is found to be perfectly comparable to the others with the advantage of a limited range of interacions. A simple scheme is proposed to expand the basis without increasing the range. It is found that a double-$z$ basis substantially improves the basis performance on diamond, whereas $d$-polarization is required for Si and Al for similar results. Finally, the projection allows the chemical analysis of the plane-wave results via population analysis on the previously optimized atomic basis.

cond-mat↗

arXiv1995

Projection of plane-wave calculations into atomic orbitals

The projection of the eigenfunctions obtained in standard plane-wave first-principle electronic-structure calculations into atomic-orbital basis sets is proposed as a formal and practical link between the methods based on plane waves and the ones based on atomic orbitals. Given a candidate atomic basis, ({\it i}) its quality is evaluated by its projection into the plane-wave eigenfunctions, ({\it ii}) it is optimized by maximizing that projection, ({\it iii}) the associated tight-binding Hamiltonian and energy bands are obtained, and ({\it iv}) population analysis is performed in a natural way. The proposed method replaces the traditional trial-and-error procedures of finding appropriate atomic bases and the fitting of bands to obtain tight-binding Hamiltonians. Test calculations of some zincblende semiconductors are presented.

cond-mat↗