arXiv subjects

Daniel Soto

Publications and source records attributed to Daniel Soto.

13 recordsLinked to original sources

arXiv2025

Robot Excavation and Manipulation of Geometrically Cohesive Granular Media

Construction throughout history typically assumes that its blueprints and building blocks are pre-determined. However, recent work suggests that alternative approaches can enable new paradigms for structure formation. Aleatory architectures, or those which rely on the properties of their granular building blocks rather than pre-planned design or computation, have thus far relied on human intervention for their creation. We imagine that robotic swarms could be valuable to create such aleatory structures by manipulating and forming structures from entangled granular materials. To discover principles by which robotic systems can effectively manipulate soft matter, we develop a robophysical model for interaction with geometrically cohesive granular media composed of u-shape particles. This robotic platform uses environmental signals to autonomously coordinate excavation, transport, and deposition of material. We test the effect of substrate initial conditions by characterizing robot performance in two different material compaction states and observe as much as a 75% change in transported mass depending on initial substrate compressive loading. These discrepancies suggest the functional role that material properties such as packing and cohesion/entanglement play in excavation and construction. To better understand these material properties, we develop an apparatus for tensile testing of the geometrically cohesive substrates, which reveals how entangled material strength responds strongly to initial compressive loading. These results explain the variation observed in robotic performance and point to future directions for better understanding robotic interaction mechanics with entangled materials.

cs.RO↗

arXiv2025

Robust control for multi-legged elongate robots in noisy environments

Modern two and four legged robots exhibit impressive mobility on complex terrain, largely attributed to advancement in learning algorithms. However, these systems often rely on high-bandwidth sensing and onboard computation to perceive/respond to terrain uncertainties. Further, current locomotion strategies typically require extensive robot-specific training, limiting their generalizability across platforms. Building on our prior research connecting robot-environment interaction and communication theory, we develop a new paradigm to construct robust and simply controlled multi-legged elongate robots (MERs) capable of operating effectively in cluttered, unstructured environments. In this framework, each leg-ground contact is thought of as a basic active contact (bac), akin to bits in signal transmission. Reliable locomotion can be achieved in open-loop on "noisy" landscapes via sufficient redundancy in bacs. In such situations, robustness is achieved through passive mechanical responses. We term such processes as those displaying mechanical intelligence (MI) and analogize these processes to forward error correction (FEC) in signal transmission. To augment MI, we develop feedback control schemes, which we refer to as computational intelligence (CI) and such processes analogize automatic repeat request (ARQ) in signal transmission. Integration of these analogies between locomotion and communication theory allow analysis, design, and prediction of embodied intelligence control schemes (integrating MI and CI) in MERs, showing effective and reliable performance (approximately half body lengths per cycle) on complex landscapes with terrain "noise" over twice the robot's height. Our work provides a foundation for systematic development of MER control, paving the way for terrain-agnostic, agile, and resilient robotic systems capable of operating in extreme environments.

cs.RO↗

arXiv2025

Collision Induced Binding and Transport of Shape Changing Robot Pairs

We report in experiment and simulation the spontaneous formation of dynamically bound pairs of shape changing robots undergoing locally repulsive collisions. These physical `gliders' robustly emerge from an ensemble of individually undulating three-link two-motor robots and can remain bound for hundreds of undulations and travel for multiple robot dimensions. Gliders occur in two distinct binding symmetries and form over a wide range of angular oscillation extent. This parameter sets the maximal concavity which influences formation probability and translation characteristics. Analysis of dynamics in simulation reveals the mechanism of effective dynamical attraction -- a result of the emergent interplay of appropriately oriented and timed repulsive interactions. Tactile sensing stabilizes the short-lived conformation via concavity modulation.

cs.RO↗

arXiv2024

Extending Granular Resistive Force Theory to Cohesive Powder-scale Media

Intrusions into granular media are common in natural and engineered settings (e.g. during animal locomotion and planetary landings). While intrusion of complex shapes in dry non-cohesive granular materials is well studied, less is known about intrusion in cohesive powders. Granular resistive force theory (RFT) -- a reduced-order frictional fluid model -- quantitatively predicts intrusion forces in dry, non-cohesive granular media by assuming a linear superposition of angularly dependent elemental stresses acting on arbitrarily shaped intruders. Here we extend RFT's applicability to cohesive dry powders, enabling quantitative modeling of forces on complex shapes during intrusion. To do so, we first conduct intrusion experiments into dry cornstarch powder to create stress functions. These stresses are similar to non-cohesive media; however, we observe relatively higher resistance to horizontal intrusions in cohesive powder compared to non-cohesive media. We use the model to identify geometries that enhance resistance to intrusion in such materials, aiming to minimize sinkage. Our calculations, supported by experimental verification, suggest that a flat surface generates the largest stress across various intrusion angles while a curved surface exhibits the largest resistance for vertical intrusion. Our model can thus facilitate optimizing design and movement strategies for robotic platforms (e.g. extraterrestrial landers) operating in such environments.

cond-mat.soft↗

arXiv2024

Addition of a peristaltic wave improves multi-legged locomotion performance on complex terrains

Characterized by their elongate bodies and relatively simple legs, multi-legged robots have the potential to locomote through complex terrains for applications such as search-and-rescue and terrain inspection. Prior work has developed effective and reliable locomotion strategies for multi-legged robots by propagating the two waves of lateral body undulation and leg stepping, which we will refer to as the two-wave template. However, these robots have limited capability to climb over obstacles with sizes comparable to their heights. We hypothesize that such limitations stem from the two-wave template that we used to prescribe the multi-legged locomotion. Seeking effective alternative waves for obstacle-climbing, we designed a five-segment robot with static (non-actuated) legs, where each cable-driven joint has a rotational degree-of-freedom (DoF) in the sagittal plane (vertical wave) and a linear DoF (peristaltic wave). We tested robot locomotion performance on a flat terrain and a rugose terrain. While the benefit of peristalsis on flat-ground locomotion is marginal, the inclusion of a peristaltic wave substantially improves the locomotion performance in rugose terrains: it not only enables obstacle-climbing capabilities with obstacles having a similar height as the robot, but it also significantly improves the traversing capabilities of the robot in such terrains. Our results demonstrate an alternative actuation mechanism for multi-legged robots, paving the way towards all-terrain multi-legged robots.

cs.RO↗

arXiv2024

Steering Elongate Multi-legged Robots By Modulating Body Undulation Waves

Centipedes exhibit great maneuverability in diverse environments due to their many legs and body-driven control. By leveraging similar morphologies and control strategies, their robotic counterparts also demonstrate effective terrestrial locomotion. However, the success of these multi-legged robots is largely limited to forward locomotion; steering is substantially less studied, in part because of the difficulty in coordinating a high degree-of-freedom robot to follow predictable, planar trajectories. To resolve these challenges, we take inspiration from control schemes based on geometric mechanics(GM) in elongate system's locomotion through highly damped environments. We model the elongate, multi-legged system as a ``terrestrial swimmer" in highly frictional environments and implement steering schemes derived from low-order templates of elongate, limbless systems. We identify an effective turning strategy by superimposing two traveling waves of lateral body undulation and further explore variations of the ``turning wave" to enable a spectrum of arc-following steering primitives. We test our hypothesized modulation scheme on a robophysical model and validate steering trajectories against theoretically predicted displacements. We then apply our control framework to Ground Control Robotics' elongate multi-legged robot, Major Tom, using these motion primitives to construct planar motion and in closed-loop control on different terrains. Our work creates a systematic framework for controlling these highly mobile devices in the plane using a low-order model based on sequences of body shape changes.

cs.RO↗

arXiv2024

Effective self-righting strategies for elongate multi-legged robots

Centipede-like robots offer an effective and robust solution to navigation over complex terrain with minimal sensing. However, when climbing over obstacles, such multi-legged robots often elevate their center-of-mass into unstable configurations, where even moderate terrain uncertainty can cause tipping over. Robust mechanisms for such elongate multi-legged robots to self-right remain unstudied. Here, we developed a comparative biological and robophysical approach to investigate self-righting strategies. We first released \textit{S. polymorpha} upside down from a 10 cm height and recorded their self-righting behaviors using top and side view high-speed cameras. Using kinematic analysis, we hypothesize that these behaviors can be prescribed by two traveling waves superimposed in the body lateral and vertical planes, respectively. We tested our hypothesis on an elongate robot with static (non-actuated) limbs, and we successfully reconstructed these self-righting behaviors. We further evaluated how wave parameters affect self-righting effectiveness. We identified two key wave parameters: the spatial frequency, which characterizes the sequence of body-rolling, and the wave amplitude, which characterizes body curvature. By empirically obtaining a behavior diagram of spatial frequency and amplitude, we identify effective and versatile self-righting strategies for general elongate multi-legged robots, which greatly enhances these robots' mobility and robustness in practical applications such as agricultural terrain inspection and search-and-rescue.

cs.RO↗

arXiv2024

Minimal design of a synthetic cilium

We study a slender filament beating in a viscous fluid with novel curvature-dependent bending stiffness. Our numerical and experimental investigations reveal that such differential stiffness can sustain planar bending waves far along flexible filaments, in stark contrast to the uniform-stiffness case which requires more sophisticated control. In particular, we establish basal actuation as a viable, parsimonious mechanism for generating high-amplitude planar bending waves. Moreover, the resulting beat patterns closely resemble the power-and-recovery strokes of propulsive biological filaments such as cilia, suggesting extensive applications in robotic and engineered systems.

cond-mat.soft↗

arXiv2023

Learning manipulation of steep granular slopes for fast Mini Rover turning

Future planetary exploration missions will require reaching challenging regions such as craters and steep slopes. Such regions are ubiquitous and present science-rich targets potentially containing information regarding the planet's internal structure. Steep slopes consisting of low-cohesion regolith are prone to flow downward under small disturbances, making it very challenging for autonomous rovers to traverse. Moreover, the navigation trajectories of rovers are heavily limited by the terrain topology and future systems will need to maneuver on flowable surfaces without getting trapped, allowing them to further expand their reach and increase mission efficiency. In this work, we used a laboratory-scale rover robot and performed maneuvering experiments on a steep granular slope of poppy seeds to explore the rover's turning capabilities. The rover is capable of lifting, sweeping, and spinning its wheels, allowing it to execute leg-like gait patterns. The high-dimensional actuation capabilities of the rover facilitate effective manipulation of the underlying granular surface. We used Bayesian Optimization (BO) to gain insight into successful turning gaits in high dimensional search space and found strategies such as differential wheel spinning and pivoting around a single sweeping wheel. We then used these insights to further fine-tune the turning gait, enabling the rover to turn 90 degrees at just above 4 seconds with minimal slip. Combining gait optimization and human-tuning approaches, we found that fast turning is empowered by creating anisotropic torques with the sweeping wheel.

cs.RO↗

arXiv2023

Multi-legged matter transport: a framework for locomotion on noisy landscapes

While the transport of matter by wheeled vehicles or legged robots can be guaranteed in engineered landscapes like roads or rails, locomotion prediction in complex environments like collapsed buildings or crop fields remains challenging. Inspired by principles of information transmission which allow signals to be reliably transmitted over noisy channels, we develop a ``matter transport" framework demonstrating that non-inertial locomotion can be provably generated over ``noisy" rugose landscapes (heterogeneities on the scale of locomotor dimensions). Experiments confirm that sufficient spatial redundancy in the form of serially-connected legged robots leads to reliable transport on such terrain without requiring sensing and control. Further analogies from communication theory coupled to advances in gaits (coding) and sensor-based feedback control (error detection/correction) can lead to agile locomotion in complex terradynamic regimes.

cs.RO↗

arXiv2023

Probing hydrodynamic fluctuation-induced forces with an oscillating robot

We study the dynamics of an oscillating, free-floating robot that generates radially expanding gravity capillary waves at a fluid surface. In open water, the device does not self-propel; near a rigid boundary, it can be attracted or repelled. Visualization of the wave field dynamics reveals that when near a boundary, a complex interference of generated and reflected waves induces a wave amplitude fluctuation asymmetry. Attraction increases as wave frequency increases or robot-boundary separation decreases. Theory on confined gravity-capillary wave radiation dynamics developed by Hocking in the 1980s captures the observed parameter dependence due to these "Hocking fields." The flexibility of the robophysical system allows detailed characterization and analysis of locally generated nonequilibrium fluctuation-induced forces [M. Kardar and R. Golestanian, Rev. Mod. Phys. 71, 1233 (1999)].

physics.flu-dyn↗

arXiv2022

Self-propulsion via slipping: frictional swimming in multi-legged locomotors

Locomotion is typically studied either in continuous media where bodies and legs experience forces generated by the flowing medium, or on solid substrates dominated by friction. In the former, centralized coordination is believed to facilitate appropriate slipping through the medium for propulsion. In the latter, slip is often assumed minimal and thus avoided via decentralized controls. We discover in laboratory experiments that terrestrial locomotion of a meter scale multi-segmented/legged robophysical model resembles undulatory fluid swimming. Experiments varying waves of limb stepping and body bending reveal how these parameters result in effective terrestrial locomotion despite seemingly ineffective isotropic frictional contacts. Dissipation dominates over inertial effects in this macroscopic-scaled regime, resulting in essentially geometric locomotion akin to microscopic-scale swimming. Theoretical analysis demonstrates that the high-dimensional multi-segmented/legged dynamics can be simplified to a centralized low-dimensional model, which reveals an effective Resistive Force Theory with an acquired viscous drag anisotropy. We extend our low-dimensional, geometric analysis to illustrate how body undulation can aid performance in non-flat obstacle-rich terrains and also use the scheme to quantitatively model how body undulation affects performance of biological centipede locomotion (the desert centipede S. polymorpha) moving at relatively high speeds (~0.5 body lengths/sec). Our results could facilitate control of multilegged robots in complex terradynamic scenarios.

physics.bio-ph↗

arXiv2008

Phase diagram of Fe-doped Ni-Mn-Ga ferromagnetic shape-memory alloys

We have studied the effect of Fe addition on the structural and magnetic transitions in the magnetic shape memory alloy Ni-Mn-Ga by substituting systematically each atomic species by Fe. Calorimetric and AC susceptibility measurements have been carried out in order to study the magnetic and structural transformation properties. We find that the addition of Fe modifies the structural and magnetic transformation temperatures. Magnetic transition temperatures are displaced to higher values when Fe is substituted into Ni-Mn-Ga, while martensitic and premartensitic transformation temperatures shift to lower values. Moreover, it has been found that the electron per atom concentration essentially governs the phase stability in the quaternary system. However, the observed scaling of transition temperatures with $e/a$ differs from that reported in the related ternary system Ni-Mn-Ga.

cond-mat.mtrl-sci↗