arXiv subjects

Daniel Vogler

Publications and source records attributed to Daniel Vogler.

5 recordsLinked to original sources

arXiv2020

Modelling of hydro-mechanical processes in heterogeneous fracture intersections using a fictitious domain method with variational transfer operators

Fluid flow in rough fractures and the coupling with the mechanical behaviour of the fractures pose great difficulties for numerical modeling approaches, due to complex fracture surface topographies, the non-linearity of hydromechanical processes and their tightly coupled nature. To this end, we have adapted a fictitious domain method to enable the simulation of hydromechanical processes in fracture-intersections. The main characteristic of the method is the immersion of the fracture, modelled as a linear elastic solid, in the surrounding computational fluid domain, modelled with the incompressible Navier Stokes equations. The fluid and the solid problems are coupled with variational transfer operators. Variational transfer operators are also used to solve contact within the fracture using a dual mortar approach and to generate problem specific fluid meshes. With respect to our applications, the key features of the method are the usage of different finite element discretizations for the solid and the fluid problem and the automatically generated representation of the fluid-solid boundary. We demonstrate that the presented methodology resolves small-scale roughness on the fracture surface, while capturing fluid flow field changes during mechanical loading. Starting with 2D/3D benchmark simulations of intersected fractures, we end with an intersected fracture composed of complex fracture surface topographies, which are in contact under increasing loads. The contributions of this article are: (1) the application of the fictitious domain method to study flow in fractures with intersections, (2) a mortar based contact solver for the solid problem, (3) generation of problem specific grids using the geometry information from the variational transfer operators.

physics.comp-ph↗

arXiv2019

Contact between rough rock surfaces using a dual mortar method

The mechanical behavior of fractures in solids, such as rocks, has strong implications for reservoir engineering applications. Deformations, and the corresponding change in solid contact area and aperture field, impact rock fracture stiffness and permeability thus altering the reservoir properties significantly. Simulating contact between fractures is numerically difficult as the non-penetration constraints lead to a nonlinear problem and the surface meshes of the solid bodies on the opposing fracture sides may be non-matching. Furthermore, the challenging geometry of the arising constraints requires to solve the problem in several iterations, adjusting the constraints in each one. Here we present a novel discrete implementation of a dual mortar method and a non-smooth SQP solver, suitable for parallel computing, and apply it to a two body contact problem consisting of realistic rock fracture geometries from the Grimsel underground laboratory in Switzerland. The contributions of this article are: 1) a novel, parallel implementation of a dual mortar method and non-smooth SQP method, 2) realistic rock geometries with rough surfaces, and 3) numerical examples, which prove that the dual mortar method is capable of replicating the nonlinear closure behavior of fractures, observed in laboratory experiments.

physics.geo-ph↗

arXiv2019

Simulation of hydro-mechanically coupled processes in rough rock fractures using an immersed boundary method and variational transfer operators

Hydro-mechanical processes in rough fractures are highly non-linear and govern productivity and associated risks in a wide range of reservoir engineering problems. To enable high-resolution simulations of hydro-mechanical processes in fractures, we present an adaptation of an immersed boundary method to compute fluid flow between rough fracture surfaces. The solid domain is immersed into the fluid domain and both domains are coupled by means of variational volumetric transfer operators. The transfer operators implicitly resolve the boundary between the solid and the fluid, which simplifies the setup of fracture simulations with complex surfaces. It is possible to choose different formulations and discretization schemes for each subproblem and it is not necessary to remesh the fluid grid. We use benchmark problems and real fracture geometries to demonstrate the following capabilities of the presented approach: (1) Resolving the boundary of the rough fracture surface in the fluid; (2) Capturing fluid flow field changes in a fracture which closes under increasing normal load; and (3) Simulate the opening of a fracture due to increased fluid pressure.

physics.geo-ph↗

arXiv2019

3D non-conforming mesh model for flow in fractured porous media using Lagrange multipliers

This work presents a modeling approach for single-phase flow in 3D fractured porous media with non-conforming meshes. To this end, a Lagrange multiplier method is combined with a parallel $L^2$-projection variational transfer approach. This Lagrange multiplier method enables the use of non-conforming meshes and depicts the variable coupling between fracture and matrix domain. The $L^2$-projection variational transfer allows general, accurate, and parallel projection of variables between non-conforming meshes (i.e. between fracture and matrix domain). Comparisons of simulations with 2D benchmarks show good agreement, and the method is further validated on 3D fracture networks by comparing it to results from conforming mesh simulations which were used as a reference. Application to realistic fracture networks with hundreds of fractures is demonstrated. Mesh size and mesh convergence are investigated for benchmark cases and 3D fracture network applications. Results demonstrate that the Lagrange multiplier method, in combination with the $L^2$-projection method, is capable of modeling single-phase flow through realistic 3D fracture networks.

physics.geo-ph↗

arXiv2018

A hierarchy of models for simulating experimental results from a 3D heterogeneous porous medium

In this work we examine the dispersion of conservative tracers (bromide and fluorescein) in an experimentally-constructed three-dimensional dual-porosity porous medium. The medium is highly heterogeneous ($σ_Y^2=5.7$), and consists of spherical, low-hydraulic-conductivity inclusions embedded in a high-hydraulic-conductivity matrix. The bi-modal medium was saturated with tracers, and then flushed with tracer-free fluid while the effluent breakthrough curves were measured. The focus for this work is to examine a hierarchy of four models (in the absence of adjustable parameters) with decreasing complexity to assess their ability to accurately represent the measured breakthrough curves. The most information-rich model was (1) a direct numerical simulation of the system in which the geometry, boundary and initial conditions, and medium properties were fully independently characterized experimentally with high fidelity. The reduced models included; (2) a simplified numerical model identical to the fully-resolved direct numerical simulation (DNS) model, but using a domain that was one-tenth the size; (3) an upscaled mobile-immobile model that allowed for a time-dependent mass-transfer coefficient; and, (4) an upscaled mobile-immobile model that assumed a space-time constant mass-transfer coefficient. The results illustrated that all four models provided accurate representations of the experimental breakthrough curves as measured by global RMS error. The primary component of error induced in the upscaled models appeared to arise from the neglect of convection within the inclusions. Interestingly, these results suggested that the conventional convection-dispersion equation, when applied in a way that resolves the heterogeneities, yields models with high fidelity without requiring the imposition of a more complex non-Fickian model.

physics.flu-dyn↗