arXiv subjects

Daniele Palossi

Publications and source records attributed to Daniele Palossi.

At least 19 recordsLinked to original sources

arXiv2026

Thinking Fast, Thinking Slow: Adaptive Multimodal Transformer-based Sensor Fusion for Depth Estimation on Ultra-low-power MCUs

Artificial intelligence (AI)-based multimodal sensor fusion is a relevant topic gaining ever more traction across ultra-low-power (ULP) embedded and cyber-physical systems, as it improves reliability, accuracy, and robustness under real-world constraints. However, adding more and more sensors to ultra-constrained sub-100 mW platforms requires balancing energy consumption against prediction accuracy. To achieve this ambitious goal, we present a novel adaptive AI methodology that combines multimodal sensor fusion (camera, ultrasound, and Time-of-Flight sensors) with a lightweight recurrent Transformer-based architecture (688 k parameters). We address the depth map estimation task with a mechanism that combines token propagation across iterations with incremental sensor utilization. At each iteration, a confidence-based gating mechanism dynamically decides whether to continue the computation by adding progressively richer but more power-demanding sensors as input. Token propagation ensures temporal consistency by forwarding context features across time. To deploy our algorithm and test a first real-world prototype, we design a novel printed circuit board featuring all three sensors, coupled with an ULP GWT GAP9 multicore System-on-Chip. When comparing our adaptive system against the same pipeline using all sensors and iterations on the NYUv2 dataset, we lose only 4.8% of the δ1 accuracy in exchange for 90% energy saving (2.44 mJ/frame). Finally, our adaptive method marks only 5.6% lower δ1 accuracy than MobileDepth despite using 9x fewer parameters. Compared with a state-of-the-art model also running on GAP9, our method improves δ1 accuracy by 31.8% thanks to our adaptive sensor fusion while operating within the same average power budget (~400 mW).

eess.IV↗

arXiv2026

Improving Autonomous Nano-drones Performance via Automated End-to-End Optimization and Deployment of DNNs

The evolution of energy-efficient ultra-low-power (ULP) parallel processors and the diffusion of convolutional neural networks (CNNs) are fueling the advent of autonomous driving nano-sized unmanned aerial vehicles (UAVs). These sub-10 cm robotic platforms are envisioned as next-generation ubiquitous smart-sensors and unobtrusive robotic-helpers. However, the limited computational/memory resources available aboard nano-UAVs introduce the challenge of minimizing and optimizing vision-based CNNs -- which to date require error-prone, labor-intensive iterative development flows. This work explores methodologies and software tools to streamline and automate all the deployment of vision-based CNN navigation on a ULP multicore system-on-chip acting as a mission computer on a Crazyflie 2.1 nano-UAV. We focus on the deployment of PULP-Dronet, a state-of-the-art CNN for autonomous navigation of nano-UAVs, from the initial training to the final closed-loop evaluation. Compared to the original hand-crafted CNN, our results show a 2x reduction of memory footprint and a speedup of 1.6x in inference time while guaranteeing the same prediction accuracy and significantly improving the behavior in the field, achieving: i) obstacle avoidance with a peak braking-speed of 1.65 m/s and improving the speed/braking-space ratio of the baseline, ii) free flight in a familiar environment up to 1.96 m/s (0.5 m/s for the baseline), and iii) lane following on a path featuring a 90 deg turn -- all while using for computation less than 1.6% of the drone's power budget. To foster new applications and future research, we open-source all the software design in a ready-to-run project compatible with the Crazyflie 2.1

eess.IV↗

arXiv2026

Adaptive AI: Energy Efficient Multi-exit TinyML on Intelligent Vision Systems at the Edge

Traditional TinyML systems for edge devices achieve high accuracy by relying on fixed-depth models that require a constant number of multiply-accumulate (MAC) operations regardless of the input complexity. This approach wastes critical resources in battery-powered Internet-of-Things (IoT) devices and limits the real-time performance of edge cyber-physical systems. Multi-exit execution schemes mitigate these issues and are widely used on high-end devices such as GPUs, but are rarely exploited on edge IoT devices because they require substantial rethinking given their strict memory and computational constraints. We address these aspects by designing and deploying, on an ultra-low-power GWT GAP9 System-on-Chip (SoC), a novel multi-exit computational scheme, demonstrating it on a MobileNetV2 convolutional neural network (CNN) for the ImageNet-100 classification task. Our approach introduces multiple exits at different CNN depths, each with a confidence-based gating mechanism that dynamically and autonomously decides whether to continue or stop inference. Comparing our multi-exit strategy to the standard MobileNetV2 on a GAP9 SoC, we show a 41% reduction in the average computational cost (from 313 MMAC to 185 MMAC), a 29% lower inference time (from 49 to 35 ms), and an energy saving of 24% (from 2.1 to 1.6 mJ per frame). All these improvements come with a ~1% loss in accuracy compared to the full-depth MobileNetV2, which achieves 80.5%. Finally, comparing our adaptable multi-exit scheme with a third-party state-of-the-art adaptive CNN, also deployed on the GAP9, we achieve more than 2x its computational efficiency, increasing it from 8.1 to 17.2 MAC/cycle.

cs.AR↗

arXiv2026

MR2-ByteTrack: CNN and Transformer-based Video Object Detection for AI-augmented Embedded Vision Sensor Nodes

Modern smart vision sensors need on-device intelligence to process video streams, as cloud computing is often impractical due to bandwidth, latency, and privacy constraints. However, these sensory systems typically rely on ultra-low-power microcontrollers (MCUs) with limited memory and compute, making conventional video object detection methods, which require feature storage or multi-frame buffering, unfeasible. To address this challenge, we introduce Multi-Resolution Rescored ByteTrack (MR2-ByteTrack), a Video Object Detection (VOD) method tailored for MCU-based embedded vision nodes. MR2-ByteTrack reduces computational cost by alternating between full- and low-resolution inference, while linking detections across frames via ByteTrack and correcting misclassifications through the Rescore algorithm, which applies probability union rules to aggregate detection confidence scores across frames. We apply our approach to both a CNN-based detector and a Transformer-based model, demonstrating its generality across architectures with fundamentally different spatial processing. Experiments on ImageNetVID demonstrate that MR2-ByteTrack maintains accuracy, achieving mAP scores of up to 49.0 for the CNN-based models and 48.7 for the Transformer, while reducing multiply-accumulate operations by as much as 53\% for the CNNs and 32\% for the Transformer. When deployed on GAP9, an ultra-low-power RISC-V multicore MCU, our method yields up to 55\% energy savings compared to processing only full-resolution images, enabling the first real-time Transformer-based VOD on an MCU-class embedded vision node. Code available at https://github.com/Bomps4/Multi_Resolution_Rescored_ByteTrack/tree/IEEE_Access

cs.CV↗

arXiv2026

NanoCockpit: Performance-optimized Application Framework for AI-based Autonomous Nanorobotics

Autonomous nano-drones, powered by vision-based tiny machine learning (TinyML) models, are a novel technology gaining momentum thanks to their broad applicability and pushing scientific advancement on resource-limited embedded systems. Their small form factor, i.e., a few tens of grams, severely limits their onboard computational resources to sub-100mW microcontroller units (MCUs). The Bitcraze Crazyflie nano-drone is the de facto standard, offering a rich set of programmable MCUs for low-level control, multi-core processing, and radio transmission. However, roboticists very often underutilize these onboard precious resources due to the absence of a simple yet efficient software layer capable of time-optimal pipelining of multi-buffer image acquisition, multi-core computation, intra-MCUs data exchange, and Wi-Fi streaming, leading to sub-optimal control performances. Our NanoCockpit framework aims to fill this gap, increasing the throughput and minimizing the system's latency, while simplifying the developer experience through coroutine-based multi-tasking. In-field experiments on three real-world TinyML nanorobotics applications show our framework achieves ideal end-to-end latency, i.e. zero overhead due to serialized tasks, delivering quantifiable improvements in closed-loop control performance (-30% mean position error, mission success rate increased from 40% to 100%).

cs.RO↗

arXiv2026

TinyDEVO: Deep Event-based Visual Odometry on Ultra-low-power Multi-core Microcontrollers

A key task in embedded vision is visual odometry (VO), which estimates camera motion from visual sensors, and it is a core component in many embedded power-constrained systems, from autonomous robots to augmented and virtual reality wearable devices. The newest class of VO systems combines deep learning models with bio-inspired event-based cameras, which are robust to motion blur and lighting conditions. However, state-of-the-art (SoA) event-based VO algorithms require significant memory and computation. For example, the leading approach DEVO requires 733 MB of memory and 155 billion multiply-accumulate (MAC) operations per frame. We present TinyDEVO, an event-based VO deep learning model designed for resource-constrained microcontroller units (MCUs). We deploy TinyDEVO on an ultra-low-power (ULP) 9-core RISC-V-based MCU, achieving a throughput of approximately 1.2 frames per second with an average power consumption of only 86 mW. Thanks to our neural network architectural optimizations and hyperparameter tuning, TinyDEVO reduces the memory footprint by 11.5x (to 63.8 MB) and the number of operations per frame by 29.7x (to 5.2 billion MACs per frame) compared to DEVO, while maintaining an average trajectory error of 27 cm, i.e., only 19 cm higher than DEVO, on three state-of-the-art datasets. Our work demonstrates, for the first time, the feasibility of an event-based VO pipeline on ultra-low-power devices.

eess.IV↗

arXiv2026

Self-supervised Domain Adaptation for Visual 3D Pose Estimation of Nano-drone Racing Gates by Enforcing Geometric Consistency

We consider the task of visually estimating the relative pose of a drone racing gate in front of a nano-quadrotor, using a convolutional neural network pre-trained on simulated data to regress the gate's pose. Due to the sim-to-real gap, the pre-trained model underperforms in the real world and must be adapted to the target domain. We propose an unsupervised domain adaptation (UDA) approach using only real image sequences collected by the drone flying an arbitrary trajectory in front of a gate; sequences are annotated in a self-supervised fashion with the drone's odometry as measured by its onboard sensors. On this dataset, a state consistency loss enforces that two images acquired at different times yield pose predictions that are consistent with the drone's odometry. Results indicate that our approach outperforms other SoA UDA approaches, has a low mean absolute error in position (x=26, y=28, z=10 cm) and orientation ($ψ$=13${^{\circ}}$), an improvement of 40% in position and 37% in orientation over a baseline. The approach's effectiveness is appreciable with as few as 10 minutes of real-world flight data and yields models with an inference time of 30.4ms (33 fps) when deployed aboard the Crazyflie 2.1 Brushless nano-drone.

cs.RO↗

arXiv2026

Tiny-DroNeRF: Tiny Neural Radiance Fields aboard Federated Learning-enabled Nano-drones

Sub-30g nano-sized aerial robots can leverage their agility and form factor to autonomously explore cluttered and narrow environments, like in industrial inspection and search and rescue missions. However, the price for their tiny size is a strong limit in their resources, i.e., sub-100 mW microcontroller units (MCUs) delivering $\sim$100 GOps/s at best, and memory budgets well below 100 MB. Despite these strict constraints, we aim to enable complex vision-based tasks aboard nano-drones, such as dense 3D scene reconstruction: a key robotic task underlying fundamental capabilities like spatial awareness and motion planning. Top-performing 3D reconstruction methods leverage neural radiance fields (NeRF) models, which require GBs of memory and massive computation, usually delivered by high-end GPUs consuming 100s of Watts. Our work introduces Tiny-DroNeRF, a lightweight NeRF model, based on Instant-NGP, and optimized for running on a GAP9 ultra-low-power (ULP) MCU aboard our nano-drones. Then, we further empower our Tiny-DroNeRF by leveraging a collaborative federated learning scheme, which distributes the model training among multiple nano-drones. Our experimental results show a 96% reduction in Tiny-DroNeRF's memory footprint compared to Instant-NGP, with only a 5.7 dB drop in reconstruction accuracy. Finally, our federated learning scheme allows Tiny-DroNeRF to train with an amount of data otherwise impossible to keep in a single drone's memory, increasing the overall reconstruction accuracy. Ultimately, our work combines, for the first time, NeRF training on an ULP MCU with federated learning on nano-drones.

cs.RO↗

arXiv2025

Multi-modal On-Device Learning for Monocular Depth Estimation on Ultra-low-power MCUs

Monocular depth estimation (MDE) plays a crucial role in enabling spatially-aware applications in Ultra-low-power (ULP) Internet-of-Things (IoT) platforms. However, the limited number of parameters of Deep Neural Networks for the MDE task, designed for IoT nodes, results in severe accuracy drops when the sensor data observed in the field shifts significantly from the training dataset. To address this domain shift problem, we present a multi-modal On-Device Learning (ODL) technique, deployed on an IoT device integrating a Greenwaves GAP9 MicroController Unit (MCU), a 80 mW monocular camera and a 8 x 8 pixel depth sensor, consuming $\approx$300mW. In its normal operation, this setup feeds a tiny 107 k-parameter $μ$PyD-Net model with monocular images for inference. The depth sensor, usually deactivated to minimize energy consumption, is only activated alongside the camera to collect pseudo-labels when the system is placed in a new environment. Then, the fine-tuning task is performed entirely on the MCU, using the new data. To optimize our backpropagation-based on-device training, we introduce a novel memory-driven sparse update scheme, which minimizes the fine-tuning memory to 1.2 MB, 2.2x less than a full update, while preserving accuracy (i.e., only 2% and 1.5% drops on the KITTI and NYUv2 datasets). Our in-field tests demonstrate, for the first time, that ODL for MDE can be performed in 17.8 minutes on the IoT node, reducing the root mean squared error from 4.9 to 0.6m with only 3 k self-labeled samples, collected in a real-life deployment scenario.

cs.CV↗

arXiv2025

Nonlinear System Identification Nano-drone Benchmark

We introduce a benchmark for system identification based on 75k real-world samples from the Crazyflie 2.1 Brushless nano-quadrotor, a sub-50g aerial vehicle widely adopted in robotics research. The platform presents a challenging testbed due to its multi-input, multi-output nature, open-loop instability, and nonlinear dynamics under agile maneuvers. The dataset comprises four aggressive trajectories with synchronized 4-dimensional motor inputs and 13-dimensional output measurements. To enable fair comparison of identification methods, the benchmark includes a suite of multi-horizon prediction metrics for evaluating both one-step and multi-step error propagation. In addition to the data, we provide a detailed description of the platform and experimental setup, as well as baseline models highlighting the challenge of accurate prediction under real-world noise and actuation nonlinearities. All data, scripts, and reference implementations are released as open-source at https://github.com/idsia-robotics/nanodrone-sysid-benchmark to facilitate transparent comparison of algorithms and support research on agile, miniaturized aerial robotics.

eess.SY↗

arXiv2025

A Map-free Deep Learning-based Framework for Gate-to-Gate Monocular Visual Navigation aboard Miniaturized Aerial Vehicles

Palm-sized autonomous nano-drones, i.e., sub-50g in weight, recently entered the drone racing scenario, where they are tasked to avoid obstacles and navigate as fast as possible through gates. However, in contrast with their bigger counterparts, i.e., kg-scale drones, nano-drones expose three orders of magnitude less onboard memory and compute power, demanding more efficient and lightweight vision-based pipelines to win the race. This work presents a map-free vision-based (using only a monocular camera) autonomous nano-drone that combines a real-time deep learning gate detection front-end with a classic yet elegant and effective visual servoing control back-end, only relying on onboard resources. Starting from two state-of-the-art tiny deep learning models, we adapt them for our specific task, and after a mixed simulator-real-world training, we integrate and deploy them aboard our nano-drone. Our best-performing pipeline costs of only 24M multiply-accumulate operations per frame, resulting in a closed-loop control performance of 30 Hz, while achieving a gate detection root mean square error of 1.4 pixels, on our ~20k real-world image dataset. In-field experiments highlight the capability of our nano-drone to successfully navigate through 15 gates in 4 min, never crashing and covering a total travel distance of ~100m, with a peak flight speed of 1.9 m/s. Finally, to stress the generalization capability of our system, we also test it in a never-seen-before environment, where it navigates through gates for more than 4 min.

cs.RO↗

arXiv2025

An Efficient Ground-aerial Transportation System for Pest Control Enabled by AI-based Autonomous Nano-UAVs

Efficient crop production requires early detection of pest outbreaks and timely treatments; we consider a solution based on a fleet of multiple autonomous miniaturized unmanned aerial vehicles (nano-UAVs) to visually detect pests and a single slower heavy vehicle that visits the detected outbreaks to deliver treatments. To cope with the extreme limitations aboard nano-UAVs, e.g., low-resolution sensors and sub-100 mW computational power budget, we design, fine-tune, and optimize a tiny image-based convolutional neural network (CNN) for pest detection. Despite the small size of our CNN (i.e., 0.58 GOps/inference), on our dataset, it scores a mean average precision (mAP) of 0.79 in detecting harmful bugs, i.e., 14% lower mAP but 32x fewer operations than the best-performing CNN in the literature. Our CNN runs in real-time at 6.8 frame/s, requiring 33 mW on a GWT GAP9 System-on-Chip aboard a Crazyflie nano-UAV. Then, to cope with in-field unexpected obstacles, we leverage a global+local path planner based on the A* algorithm. The global path planner determines the best route for the nano-UAV to sweep the entire area, while the local one runs up to 50 Hz aboard our nano-UAV and prevents collision by adjusting the short-distance path. Finally, we demonstrate with in-simulator experiments that once a 25 nano-UAVs fleet has combed a 200x200 m vineyard, collected information can be used to plan the best path for the tractor, visiting all and only required hotspots. In this scenario, our efficient transportation system, compared to a traditional single-ground vehicle performing both inspection and treatment, can save up to 20 h working time.

cs.RO↗

arXiv2024

Accelerating Image-based Pest Detection on a Heterogeneous Multi-core Microcontroller

The codling moth pest poses a significant threat to global crop production, with potential losses of up to 80% in apple orchards. Special camera-based sensor nodes are deployed in the field to record and transmit images of trapped insects to monitor the presence of the pest. This paper investigates the embedding of computer vision algorithms in the sensor node using a novel State-of-the-Art Microcontroller Unit (MCU), the GreenWaves Technologies' GAP9 System-on-Chip, which combines 10 RISC-V general purposes cores with a convolution hardware accelerator. We compare the performance of a lightweight Viola-Jones detector algorithm with a Convolutional Neural Network (CNN), MobileNetV3-SSDLite, trained for the pest detection task. On two datasets that differentiate for the distance between the camera sensor and the pest targets, the CNN generalizes better than the other method and achieves a detection accuracy between 83% and 72%. Thanks to the GAP9's CNN accelerator, the CNN inference task takes only 147 ms to process a 320$\times$240 image. Compared to the GAP8 MCU, which only relies on general-purpose cores for processing, we achieved 9.5$\times$ faster inference speed. When running on a 1000 mAh battery at 3.7 V, the estimated lifetime is approximately 199 days, processing an image every 30 seconds. Our study demonstrates that the novel heterogeneous MCU can perform end-to-end CNN inference with an energy consumption of just 4.85 mJ, matching the efficiency of the simpler Viola-Jones algorithm and offering power consumption up to 15$\times$ lower than previous methods. Code at: https://github.com/Bomps4/TAFE_Pest_Detection

eess.IV↗

arXiv2024

Training on the Fly: On-device Self-supervised Learning aboard Nano-drones within 20 mW

Miniaturized cyber-physical systems (CPSes) powered by tiny machine learning (TinyML), such as nano-drones, are becoming an increasingly attractive technology. Their small form factor (i.e., ~10cm diameter) ensures vast applicability, ranging from the exploration of narrow disaster scenarios to safe human-robot interaction. Simple electronics make these CPSes inexpensive, but strongly limit the computational, memory, and sensing resources available on board. In real-world applications, these limitations are further exacerbated by domain shift. This fundamental machine learning problem implies that model perception performance drops when moving from the training domain to a different deployment one. To cope with and mitigate this general problem, we present a novel on-device fine-tuning approach that relies only on the limited ultra-low power resources available aboard nano-drones. Then, to overcome the lack of ground-truth training labels aboard our CPS, we also employ a self-supervised method based on ego-motion consistency. Albeit our work builds on top of a specific real-world vision-based human pose estimation task, it is widely applicable for many embedded TinyML use cases. Our 512-image on-device training procedure is fully deployed aboard an ultra-low power GWT GAP9 System-on-Chip and requires only 1MB of memory while consuming as low as 19mW or running in just 510ms (at 38mW). Finally, we demonstrate the benefits of our on-device learning approach by field-testing our closed-loop CPS, showing a reduction in horizontal position error of up to 26% vs. a non-fine-tuned state-of-the-art baseline. In the most challenging never-seen-before environment, our on-device learning procedure makes the difference between succeeding or failing the mission.

cs.RO↗

arXiv2024

Distilling Tiny and Ultra-fast Deep Neural Networks for Autonomous Navigation on Nano-UAVs

Nano-sized unmanned aerial vehicles (UAVs) are ideal candidates for flying Internet-of-Things smart sensors to collect information in narrow spaces. This requires ultra-fast navigation under very tight memory/computation constraints. The PULP-Dronet convolutional neural network (CNN) enables autonomous navigation running aboard a nano-UAV at 19 frame/s, at the cost of a large memory footprint of 320 kB -- and with drone control in complex scenarios hindered by the disjoint training of collision avoidance and steering capabilities. In this work, we distill a novel family of CNNs with better capabilities than PULP-Dronet, but memory footprint reduced by up to 168x (down to 2.9 kB), achieving an inference rate of up to 139 frame/s; we collect a new open-source unified collision/steering 66 k images dataset for more robust navigation; and we perform a thorough in-field analysis of both PULP-Dronet and our tiny CNNs running on a commercially available nano-UAV. Our tiniest CNN, called Tiny-PULP-Dronet v3, navigates with a 100% success rate a challenging and never-seen-before path, composed of a narrow obstacle-populated corridor and a 180° turn, at a maximum target speed of 0.5 m/s. In the same scenario, the SoA PULP-Dronet consistently fails despite having 168x more parameters.

eess.IV↗

arXiv2024

Tiny-PULP-Dronets: Squeezing Neural Networks for Faster and Lighter Inference on Multi-Tasking Autonomous Nano-Drones

Pocket-sized autonomous nano-drones can revolutionize many robotic use cases, such as visual inspection in narrow, constrained spaces, and ensure safer human-robot interaction due to their tiny form factor and weight -- i.e., tens of grams. This compelling vision is challenged by the high level of intelligence needed aboard, which clashes against the limited computational and storage resources available on PULP (parallel-ultra-low-power) MCU class navigation and mission controllers that can be hosted aboard. This work moves from PULP-Dronet, a State-of-the-Art convolutional neural network for autonomous navigation on nano-drones. We introduce Tiny-PULP-Dronet: a novel methodology to squeeze by more than one order of magnitude model size (50x fewer parameters), and number of operations (27x less multiply-and-accumulate) required to run inference with similar flight performance as PULP-Dronet. This massive reduction paves the way towards affordable multi-tasking on nano-drones, a fundamental requirement for achieving high-level intelligence.

cs.RO↗

arXiv2024

High-throughput Visual Nano-drone to Nano-drone Relative Localization using Onboard Fully Convolutional Networks

Relative drone-to-drone localization is a fundamental building block for any swarm operations. We address this task in the context of miniaturized nano-drones, i.e., 10cm in diameter, which show an ever-growing interest due to novel use cases enabled by their reduced form factor. The price for their versatility comes with limited onboard resources, i.e., sensors, processing units, and memory, which limits the complexity of the onboard algorithms. A traditional solution to overcome these limitations is represented by lightweight deep learning models directly deployed aboard nano-drones. This work tackles the challenging relative pose estimation between nano-drones using only a gray-scale low-resolution camera and an ultra-low-power System-on-Chip (SoC) hosted onboard. We present a vertically integrated system based on a novel vision-based fully convolutional neural network (FCNN), which runs at 39Hz within 101mW onboard a Crazyflie nano-drone extended with the GWT GAP8 SoC. We compare our FCNN against three State-of-the-Art (SoA) systems. Considering the best-performing SoA approach, our model results in an R-squared improvement from 32 to 47% on the horizontal image coordinate and from 18 to 55% on the vertical image coordinate, on a real-world dataset of 30k images. Finally, our in-field tests show a reduction of the average tracking error of 37% compared to a previous SoA work and an endurance performance up to the entire battery lifetime of 4 minutes.

cs.CV↗

arXiv2024

Multi-resolution Rescored ByteTrack for Video Object Detection on Ultra-low-power Embedded Systems

This paper introduces Multi-Resolution Rescored Byte-Track (MR2-ByteTrack), a novel video object detection framework for ultra-low-power embedded processors. This method reduces the average compute load of an off-the-shelf Deep Neural Network (DNN) based object detector by up to 2.25$\times$ by alternating the processing of high-resolution images (320$\times$320 pixels) with multiple down-sized frames (192$\times$192 pixels). To tackle the accuracy degradation due to the reduced image input size, MR2-ByteTrack correlates the output detections over time using the ByteTrack tracker and corrects potential misclassification using a novel probabilistic Rescore algorithm. By interleaving two down-sized images for every high-resolution one as the input of different state-of-the-art DNN object detectors with our MR2-ByteTrack, we demonstrate an average accuracy increase of 2.16% and a latency reduction of 43% on the GAP9 microcontroller compared to a baseline frame-by-frame inference scheme using exclusively full-resolution images. Code available at: https://github.com/Bomps4/Multi_Resolution_Rescored_ByteTrack

cs.CV↗