arXiv subjects

Dante S. Lauretta

Publications and source records attributed to Dante S. Lauretta.

At least 19 recordsLinked to original sources

arXiv2026

Volatile depletion in rocky planets as a chemical fingerprint of hybrid accretion

Volatile depletion in rocky planets relative to their host stars is commonplace in both the Solar System and exoplanetary systems, yet the connections between planet formation and composition remain elusive. Here we model devolatilization during pebble accretion in combination with collisional growth from volatile-depleted planetesimals to explore the formation pathways of Earth and Mars. Using Bayesian inference, we find that bulk silicate Earth is best reproduced by ${\gtrsim}$75% contribution from two protoplanets formed via pebble accretion, supplemented by up to $\sim$25% material from planetesimals that are compositionally akin to the asteroid Vesta. Using instead a planetesimal volatile-depletion curve that is not observed among known meteorite parent bodies would allow the planetesimal contribution to reach 40$^{+15}_{-14}$%. In comparison, bulk silicate Mars reflects 27$\pm$5% pebble-accreted material and 73${\pm}$5% Vesta-like planetesimals. We identify volatile depletion as a chemical fingerprint of hybrid accretion, in which both pebble accretion and collisional assembly contribute to terrestrial planet growth. By quantitatively linking formation pathways to volatile budgets, our findings demonstrate how planetary accretion histories can be inferred from elemental signatures, with broad implications for interpreting the chemical diversity of rocky exoplanets.

astro-ph.EP↗

arXiv2026

OSIRIS-REx Returned a Pristine Sample of Asteroid Bennu: Takeaways from the Mission's Contamination Control and Knowledge Program

NASA's OSIRIS-REx mission had the objective of delivering a pristine sample from asteroid (101955) Bennu to Earth for scientific analysis--where "pristine" signifies the absence of foreign materials that could affect sample measurements. OSIRIS-REx returned 121.6 g of regolith in September 2023; this study documents the systematic investigation of suspected contaminants encountered during the mission's sample analysis phase. Most suspected contaminants did not originate from the spacecraft or sample curation. Some were introduced during laboratory analyses, reinforcing the importance of procedural blanks and a strategic approach to sharing samples across laboratories with different analytical targets. Several suspected contaminants, such as phosphate and sodium fluoride particles, were ultimately identified as indigenous to Bennu, highlighting the critical role of contamination knowledge in preventing the dismissal of valuable scientific data. We find that the returned sample meets the definition of pristine, except for an isolated 1.24% (by mass) that escaped the sample container and was thereby contaminated with spacecraft particulates. These findings demonstrate the effectiveness of systematically applied contamination science and engineering practices and provide lessons and approaches to help maximize the scientific integrity of future planetary sample return missions.

astro-ph.EP↗

arXiv2025

OSIRIS-REx Operational Key Decision Points: A Retrospective

OSIRIS-REx, NASA's first asteroid sample return mission, rendezvoused with the near-Earth asteroid Bennu in 2018 and delivered a 121.6-gram sample to Earth in 2023, the largest amount of material ever recovered from a planetary body beyond the Moon. The operations phase of OSIRIS-REx was considered the most challenging robotic mission that NASA had undertaken, owing to the tight constraints on spacecraft performance and the microgravity environment. In preparation for the sample collection and return campaign, the mission leadership defined four operational key decision points (OKDPs) at critical junctures: sample site selection, rehearsal and execution of the sample collection maneuver, sample stow, and Earth return. This publication examines these OKDPs in depth, inclusive of rationale, implementation, decision processes, and efficacy. We also review other decisions that enabled mission success despite the unexpectedly rugged nature of Bennu's surface. This information should be beneficial for future challenging operational concepts where science-in-the-loop, time-critical decision making is integral to success.

astro-ph.EP↗

arXiv2024

Properties of outer solar system pebbles during planetesimal formation from meteor observations

In the late stages of accretion leading up to the formation of planetesimals, particles grew to pebbles the size of 1-mm to tens of cm. That is the same size range that dominates the present-day comet mass loss. Meteoroids that size cause visible meteors on Earth. Here, we hypothesize that the size distribution and the physical and chemical properties of young meteoroid streams still contain information about the conditions in the solar nebula during these late stages of accretion. From observations of 47 young meteor showers, we find that freshly ejected meteoroids from long-period comets tend to have low bulk density and are distributed with equal surface area per log-mass interval (magnitude distribution index chi ~ 1.85), suggesting gentle accretion conditions. Jupiter-family comets, on the other hand, mostly produce meteoroids twice as dense and distributed with a steeper chi ~ 2.15 or even chi ~ 2.5, which implies that those pebbles grew from particles fragmenting in a collisional cascade or by catastrophic collisions, respectively. Both comet populations contain an admixture of compact materials that are sometimes sodium-poor, but Jupiter-family comets show a higher percentage (~8% on average) than long-period comet showers (~4%), and a wider range. While there are exceptions in both groups, the implication is that most long-period comets formed under gentle particle growth conditions, possibly near the 30 AU edge of the Trans Neptunian Disk, while most Jupiter family comets formed closer to the Sun where pebbles reached or passed the fragmentation barrier. This is possible if the Scattered Disk represents all objects scattered by Neptune during its migration, while the present-day outer Oort cloud formed only during and after the Sun had moved away from sibling stars.

astro-ph.EP↗

arXiv2024

QRIS: A Quantitative Reflectance Imaging System for the Pristine Sample of Asteroid Bennu

The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preliminary examination of the Bennu sample. QRIS uses a 12-bit machine vision camera to measure reflectance over wavelength bands spanning the near ultraviolet to the near infrared. Raw data are processed by a calibration pipeline that generates a series of monochromatic, high-dynamic-range reflectance images, as well as band ratio maps, band depth maps, and 3-channel color images. The purpose of these spectral reflectance data is to help characterize lithologies in the sample and compare them to lithologies observed on Bennu by the OSIRIS-REx spacecraft. This initial assessment of lithological diversity was intended to help select the subsamples that will be used to address mission science questions about the early solar system and the origins of life and to provide important context for the selection of representative subsamples for preservation and distribution to international partners. When QRIS imaged the Bennu sample, unexpected calibration issues arose that had not been evident at imaging rehearsals and negatively impacted the quality of QRIS data. These issues were caused by stray light within the lens and reflections off the glovebox window and interior, and were exacerbated by the sample's extremely low reflectance. QRIS data were useful for confirming conclusions drawn from other data, but reflectance and spectral data from QRIS alone unfortunately have limited utility.

astro-ph.EP↗

arXiv2024

Asteroid (101955) Bennu in the Laboratory: Properties of the Sample Collected by OSIRIS-REx

On 24 September 2023, the NASA OSIRIS-REx mission dropped a capsule to Earth containing approximately 120 g of pristine carbonaceous regolith from Bennu. We describe the delivery and initial allocation of this asteroid sample and introduce its bulk physical, chemical, and mineralogical properties from early analyses. The regolith is very dark overall, with higher-reflectance inclusions and particles interspersed. Particle sizes range from sub-micron dust to a stone about 3.5 cm long. Millimeter-scale and larger stones typically have hummocky or angular morphologies. A subset of the stones appears mottled by brighter material that occurs as veins and crusts. Hummocky stones have the lowest densities and mottled stones have the highest. Remote sensing of the surface of Bennu detected hydrated phyllosilicates, magnetite, organic compounds, carbonates, and scarce anhydrous silicates, all of which the sample confirms. We also find sulfides, presolar grains, and, less expectedly, Na-rich phosphates, as well as other trace phases. The sample composition and mineralogy indicate substantial aqueous alteration and resemble those of Ryugu and the most chemically primitive, low-petrologic-type carbonaceous chondrites. Nevertheless, we find distinct hydrogen, nitrogen, and oxygen isotopic compositions, and some of the material we analyzed is enriched in fluid-mobile elements. Our findings underscore the value of sample return, especially for low-density material that may not readily survive atmospheric entry, and lay the groundwork for more comprehensive analyses.

astro-ph.EP↗

arXiv2023

OSIRIS-REx Sample Analysis Plan -- Revision 3.0

The Origins, Spectral Interpretation, Resource Identification, and Security Regolith Explorer (OSIRIS-REx) spacecraft arrived at its target, near-Earth asteroid 101955 Bennu, in December 2018. After one year of operating in proximity, the team selected a primary site for sample collection. In October 2020, the spacecraft descended to the surface of Bennu and collected a sample. The spacecraft departed Bennu in May 2021 and will return the sample to Earth in September 2023. The analysis of the returned sample will produce key data to determine the history of this B-type asteroid and that of its components and precursor objects. The main goal of the OSIRIS-REx Sample Analysis Plan is to provide a framework for the Sample Analysis Team to meet the Level 1 mission requirement to analyze the returned sample to determine presolar history, formation age, nebular and parent-body alteration history, relation to known meteorites, organic history, space weathering, resurfacing history, and energy balance in the regolith of Bennu. To achieve this goal, this plan establishes a hypothesis-driven framework for coordinated sample analyses, defines the analytical instrumentation and techniques to be applied to the returned sample, provides guidance on the analysis strategy for baseline, overguide, and threshold amounts of returned sample, including a rare or unique lithology, describes the data storage, management, retrieval, and archiving system, establishes a protocol for the implementation of a micro-geographical information system to facilitate co-registration and coordinated analysis of sample science data, outlines the plans for Sample Analysis Readiness Testing, and provides guidance for the transfer of samples from curation to the Sample Analysis Team.

astro-ph.IM↗

arXiv2021

Calibration and Performance of the REgolith X-Ray Imaging Spectrometer (REXIS) Aboard NASA's OSIRIS-REx Mission to Bennu

The REgolith X-ray Imaging Spectrometer (REXIS) instrument on board NASA's OSIRIS-REx mission to the asteroid Bennu is a Class-D student collaboration experiment designed to detect fluoresced X-rays from the asteroid's surface to measure elemental abundances. In July and November 2019 REXIS collected ~615 hours of integrated exposure time of Bennu's sun-illuminated surface from terminator orbits. As reported in Hoak et al. (2021), the REXIS data do not contain a clear signal of X-ray fluorescence from the asteroid, in part due to the low incident solar X-ray flux during periods of observation. To support the evaluation of the upper limits on the detectable X-ray signal that may provide insights for the properties of Bennu's regolith, we present an overview of the REXIS instrument, its operation, and details of its in-flight calibration on astrophysical X-ray sources. This calibration includes the serendipitous detection of the transient X-ray binary MAXI J0637-430 during Bennu observations, demonstrating the operational success of REXIS at the asteroid. We convey some lessons learned for future X-ray spectroscopy imaging investigations of asteroid surfaces.

astro-ph.EP↗

arXiv2021

Alternative Sample Mass Measurement Technique for OSIRIS-REX Sample Collection Phase

The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft is the third NASA New Frontiers Program mission and arrived at the near-Earth asteroid (101955) Bennu in December 2018. Following completion of sample collection in October 2020, otherwise known as Touch-And-Go (TAG), the OSIRIS-REx spacecraft was set to verify its collected sample mass requirement (> 60g of material). The thoroughly tested Sample Mass Measurement (SMM) method was to be used for this verification. Imaging of the Touch-And-Go Sample Acquisition Mechanism (TAGSAM) was received shortly following the TAG event, intended to ensure mechanism health prior to moving forward with the SMM activity. These images displayed sample leakage, prompting discussion for alternative paths forward. Risk of continued sample loss and a desire to retain as much material as possible lead the team to pursue an accelerated sample stow schedule and forgo the planned SMM activity. Once the sample was safely stowed in the return capsule an alternative SMM method was proposed. The alternative SMM technique utilized reaction wheel momentum data from identical TAGSAM movements prior to and following the TAG event to estimate changes in spacecraft moment of inertia. Conservation of momentum was used to isolate the sample mass from this inertia change. Using this new method, the spacecraft team was able to successfully estimate collected sample mass to be 250.37 +/- 101 g.

astro-ph.EP↗

arXiv2021

Widely distributed exogenic materials of varying compositions and morphologies on asteroid (101955) Bennu

Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydrous silicates. The exogenic materials are spatially resolved by the telescopic camera PolyCam. All such materials are brighter than their surroundings, and they are expressed in a variety of morphologies: homogeneous, breccia-like, inclusion-like, and others. Inclusion-like features are the most common. Visible spectrophotometry was obtained for 46 of the 77 locations from MapCam images. Principal component analysis indicates at least two trends: (i) mixing of Bennu's average spectrum with a strong 1-um band absorption, possibly from pyroxene-rich material, and (ii) mixing with a weak 1-um band absorption. The endmember with a strong 1-um feature is consistent with Howardite-Eucrite-Diogenite (HED) meteorites, whereas the one showing a weak 1-um feature may be consistent with HEDs, ordinary chondrites, or carbonaceous chondrites. The variation in the few available near-infrared reflectance spectra strongly suggests varying compositions among the exogenic materials. Thus, Bennu might record the remnants of multiple impacts with different compositions to its parent body, which could have happened in the very early history of the Solar System. Moreover, at least one of the exogenic objects is compositionally different from the exogenic materials found on the similar asteroid (162173) Ryugu, and they suggest different impact tracks.

astro-ph.EP↗

arXiv2020

Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu

The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether.

astro-ph.EP↗

arXiv2020

Spin-driven evolution of asteroids' top-shapes at fast and slow spins seen from (101955) Bennu and (162173) Ryugu

Proximity observations by OSIRIS-REx and Hayabusa2 provided clues on the shape evolution processes of the target asteroids, (101955) Bennu and (162173) Ryugu. Their oblate shapes with equatorial ridges, or the so-called top shapes, may have evolved due to their rotational conditions at present and in the past. Different shape evolution scenarios were previously proposed; Bennu's top shape may have been driven by surface processing, while Ryugu's may have been developed due to large deformation. These two scenarios seem to be inconsistent. Here, we revisit the structural analyses in earlier works and fill a gap to connect these explanations. We also apply a semi-analytical technique for computing the cohesive strength distribution in a uniformly rotating triaxial ellipsoid to characterize the global failure of top-shaped bodies. Assuming that the structure is uniform, our semi-analytical approach describes the spatial variations in failed regions at different spin periods; surface regions are the most sensitive at longer spin periods, while interiors fail structurally at shorter spin periods. This finding suggests that the shape evolution of a top shape may vary due to rotation and internal structure, which can explain the different evolution scenarios of Bennu's and Ryugu's top shapes. We interpret our results as the indications of top shapes' various evolution processes.

astro-ph.EP↗

arXiv2019

Autonomous Detection of Particles and Tracks in Optical Images

During its initial orbital phase in early 2019, the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission detected small particles apparently emanating from the surface of the near-Earth asteroid (101955) Bennu in optical navigation images. Identification and characterization of the physical and dynamical properties of these objects became a mission priority in terms of both spacecraft safety and scientific investigation. Traditional techniques for particle identification and tracking typically rely on manual inspection and are often time-consuming. The large number of particles associated with the Bennu events and the mission criticality rendered manual inspection techniques infeasible for long-term operational support. In this work, we present techniques for autonomously detecting potential particles in monocular images and providing initial correspondences between observations in sequential images, as implemented for the OSIRIS-REx mission.

astro-ph.IM↗

arXiv2019

The Global Surface Roughness of 25143 Itokawa

Surface roughness is an important metric in understanding how the geologic history of an asteroid affects its small-scale topography and it provides an additional means to quantitatively compare one asteroid with another. In this study, we report the first detailed global surface roughness maps of 25143 Itokawa at horizontal scales from 8--32~m. Comparison of the spatial distribution of the surface roughness of Itokawa with 433 Eros, the other asteroid for which this kind of analysis has been possible, indicates that the two asteroids are dominated by different geologic processes. On Itokawa, the surface roughness reflects the results of down-slope activity that moves fine grained material into geopotential lows and leaves large blocks in geopotential highs. On 433 Eros, the surface roughness is controlled by geologically-recent large impact craters. In addition, large longitudinal spatial variations of surface roughness could impact the role of YORP on Itokawa.

astro-ph.EP↗

arXiv2019

Detection of Rotational Acceleration of Bennu using HST Lightcurve Observations

We observed the near-Earth asteroid (101955) Bennu from the ground in 1999 and 2005, and with the Hubble Space Telescope in 2012, to constrain its rotation rate. The data reveal an acceleration of $2.64 \pm 1.05 \times 10^{-6} \mathrm{deg\ day}^{-2}$, which could be due to a change in the moment of inertia of Bennu or to spin up from the YORP effect or other source of angular momentum. The best solution is within 1 sigma of the period determined by Nolan et al. (2013). The OSIRIS-REx mission will determine the rotation state independently in 2019. Those measurements should show whether the change in rotation rate is a steady increase (due, for example, to the YORP effect) or some other phenomenon. The precise shape and surface properties measured by the OSIRIS-REx science team will allow for a better understanding of variations in rotation rate of small asteroids.

astro-ph.EP↗

arXiv2018

Thermal Alteration of Labile Elements in Carbonaceous Chondrites

Carbonaceous chondrite meteorites are some of the oldest Solar System planetary materials available for study. The CI group has bulk abundances of elements similar to those of the solar photosphere. Of particular interest in carbonaceous chondrite compositions are labile elements, which vaporize and mobilize efficiently during post-accretionary parent-body heating events. Thus, they can record low-temperature alteration events throughout asteroid evolution. However, the precise nature of labile-element mobilization in planetary materials is unknown. Here we characterize the thermally induced movements of the labile elements S, As, Se, Te, Cd, Sb, and Hg in carbonaceous chondrites by conducting experimental simulations of volatile-element mobilization during thermal metamorphism. This process results in appreciable loss of some elements at temperatures as low as 500 K. This work builds on previous laboratory heating experiments on primitive meteorites and shows the sensitivity of chondrite compositions to excursions in temperature. Elements such as S and Hg have the most active response to temperature across different meteorite groups. Labile element mobilization in primitive meteorites is essential for quantifying elemental fractionation that occurred on asteroids early in Solar System history. This work is relevant to maintaining a pristine sample from asteroid (101955) Bennu from the OSIRIS-REx mission and constraining the past orbital history of Bennu. Additionally, we discuss thermal effects on surface processes of near-Earth asteroids, including the thermal history of "rock comets" such as (3200) Phaethon. This work is also critical for constraining the concentrations of contaminants in vaporized water extracted from asteroid regolith as part of future in situ resource utilization for sustained robotic and human space exploration.

astro-ph.EP↗

arXiv2018

Rotationally-Resolved Spectroscopic Characterization of near-Earth object (3200) Phaethon

(3200) Phaethon is a compelling object as it has an asteroidal appearance and spectrum, produces a weak dust tail during perihelion at just 0.14 AU, and is the parent body of the Geminid Meteor Shower. A better understanding of the physical properties of Phaethon is needed to understand the nature of its current and previous activity, relationship to potential source populations, and to plan for the upcoming flyby of the DESTINY+ spacecraft of Phaethon in the 2020s. We performed rotationally-resolved spectroscopy of Phaethon at visible and near-infrared wavelengths (0.4-2.5 microns) in 2007 and 2017, respectively, to better understand its surface properties. The visible and near-infrared observations both spanned nearly a full rotation or more and were under similar observing geometries, covering the whole surface with the exception of the north pole. The visible wavelengths show blue slopes with only minor slope variations and no absorption features. The NIR data is minimally varying and concave upwards, from very blue to blue-neutral with increasing wavelength. We fit the short-wavelength tail of Phaethon's thermal emission and retrieve an average visible albedo of pv = 0.08 +/- 0.01, which is lower than previous measurements but plausible in light of the recent larger radar-measured diameter of Phaethon. We retrieve an average infrared beaming parameter of Phaethon of eta = 1.70 +/- 0.05, which is similar to previous results. We discuss the implications of Phaethon's visible and near-infrared spectrum as well as the lower albedo on its origin, source population, and evolutionary history.

astro-ph.EP↗

arXiv2014

The Design Reference Asteroid for the OSIRIS-REx Mission Target (101955) Bennu

The Design Reference Asteroid (DRA) is a compilation of all that is known about the OSIRIS-REx mission target, asteroid (101955) Bennu. It contains our best knowledge of the properties of Bennu based on an extensive observational campaign that began shortly after its discovery, and has been used to inform mission plan development and flight system design. The DRA will also be compared with post-encounter science results to determine the accuracy of our Earth-based characterization efforts. The extensive observations of Bennu in 1999 has made it one of the best-characterized near-Earth asteroids. Many physical parameters are well determined, and span a number of categories: Orbital, Bulk, Rotational, Radar, Photometric, Spectroscopic, Thermal, Surface Analog, and Environment Properties. Some results described in the DRA have been published in peer-reviewed journals while others have been reviewed by OSIRIS-REx Science Team members and/or external reviewers. Some data, such as Surface Analog Properties, are based on our best knowledge of asteroid surfaces, in particular those of asteroids Eros and Itokawa. This public release of the OSIRIS-REx Design Reference Asteroid is a annotated version of the internal OSIRIS-REx document OREX-DOCS-04.00-00002, Rev 9 (accepted by the OSIRIS-REx project on 2014-April-14). The supplemental data products that accompany the official OSIRIS-REx version of the DRA are not included in this release. We are making this document available as a service to future mission planners in the hope that it will inform their efforts.

astro-ph.EP↗