arXiv subjects

Daren Dillon

Publications and source records attributed to Daren Dillon.

At least 19 recordsLinked to original sources

arXiv2026

Pre-shipment optical characterization of the SCALES instrument

The Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a 1-5 micron imager and 2-5 micron integral field spectrograph, currently being commissioned on the Keck II Telescope. SCALES is optimized for exoplanet high-contrast imaging and spectroscopic characterization, and will be sensitive to older, colder exoplanets than existing instrumentation. The 12.3" x 12.3" imaging channel is designed to replicate the capabilities of NIRC2, and the low (R~35-200, 2.2" x 2.2" FOV) and medium (R~2500-5000, 0.36" x 0.34" FOV) spectral resolution modes offer new capabilities compared to existing Keck instrumentation. We present preliminary optical performance results from laboratory testing and commissioning of SCALES.

astro-ph.IM↗

arXiv2026

On-sky results from REDWOODS, a platform at Lick/ShaneAO for testing second stage AO technologies

REDWOODS is a new sub-testbed within the Shane Adaptive Optics (AO) system at Lick observatory, developed to test second stage AO wavefront sensing and control technologies, including a Self-Coherent Camera with optional broadband Wynne corrector, two different three-sided fully reflective highly broadband pyramid wavefront sensor modes, and multi-wavefront sensor single conjugate AO control. We present project results to date, including on-sky data.

astro-ph.IM↗

arXiv2026

Demonstrating the integration of a photonic lantern with an all-fiber-based nulling interferometer

High-contrast imaging of Solar System scale exoplanets and protoplanets demands advancements in instrumentation to access deeper starlight suppression at smaller angular separations than today's state-of-the-art. The multi-mode to single-mode conversion capabilities of photonic lanterns (PLs) provide new avenues to implement techniques such as nulling interferometry due to the inherent spatial filtering of single-mode waveguides. In this work, we present laboratory results on an all-fiber-based focal plane nulling interferometer using off-the-shelf components operating at 1550 nm. We demonstrate the implementation of a PL for coupling light into the instrument, and compare it to the case when laser light is directly fed into the interferometer. The integration of a PL with the interferometer evidences their potential for feeding photonic-based science instruments. Additionally, we discuss expanding the concept of the instrument for the detection of accreting protoplanets.

astro-ph.IM↗

arXiv2026

Experimentally-determined performance limits for joint imaging and wavefront sensing with a photonic lantern

The photonic lantern (PL) is a focal-plane wavefront sensor (WFS) that can be used for second-stage control of extreme adaptive optics (AO) systems. While the number of sensed modes and the dynamic range with respect to each mode have been relatively well characterized, little attention has been paid to the PL's sensitivity, i.e. how measurement noise impacts the accuracy of PL wavefront reconstruction. We compute the PL's sensitivity to photon noise as a function of spatial frequency, and compare it to existing WFSs, using simulations as well as experiments on the muirSEAL testbed. We further assess these metrics in the case where only a subset of PL ports are available for wavefront sensing. In this configuration, the remaining ports are used to spatially and spectrally reconstruct the observed scene using algorithms such as SPADE. Using more ports for wavefront sensing enables greater aberration sensitivity but leaves less spatial information for image reconstruction. This allows us to trade off between fewer samples with smaller aberrations and more samples with larger aberrations. This work sets the stage for AO system design incorporating the PL as a joint WFS and imager.

astro-ph.IM↗

arXiv2026

Laboratory characterization of a multi-photonic lantern optical waveguide using off-axis holography

Photonic lanterns (PLs) are waveguides that convert multi-mode input light to single-mode outputs. Wavefront sensing (WFS) and spectroscopy using a PL have been demonstrated, but PL simulations and experiments show significant mismatches. For the WaveDriver project, a proposed Habitable Worlds Observatory pathfinder that uses a PL for WFS as well as for integral field spectroscopy, we manufactured an optical waveguide consisting of an array of seven 19-port PLs in one device. We present laboratory characterization of the individual PLs, consisting of measurements of the principal modes at each PL input using digital off-axis holography. We compare our mode measurements to simulations to assess the variation in the PL manufacturing process. We discuss expected WFS performance in the WaveDriver configuration.

astro-ph.IM↗

arXiv2025

On-sky demonstration of second-stage wavefront control with a photonic lantern

Ground-based direct imaging of exoplanets at high contrast requires precise correction of atmospheric turbulence using adaptive optics (AO). The planet-to-star contrast ratio at small angular separations from the host star is often limited by non-common-path aberrations (NCPAs) seen only in the science plane. The photonic lantern (PL) can be used to sense aberrations at the final science imaging plane. This enables a two-stage wavefront control architecture, in which the first-stage wavefront sensor senses atmospheric turbulence and the PL senses NCPAs and other aberrations not seen by the first stage. We demonstrate closed-loop control of residual wavefront errors using a non-dispersed PL after first-stage AO correction on the Shane 3m telescope at Lick Observatory. Our results show that non-dispersed PLs can be used for second-stage wavefront sensing, enabling performance improvements via minimally invasive retrofits to existing AO systems.

astro-ph.IM↗

arXiv2025

The Santa Cruz Extreme AO Lab (SEAL) 2.0: A reflective, multi-wavelength rebuild

The Santa cruz Extreme Adaptive optics Lab (SEAL) is a visible/near-infrared wavelength testbed designed to support technology development for high contrast imaging on large, segmented, ground-based telescopes. SEAL saw first light in 2021 as a transmissive, visible-wavelength AO testbed. In this paper, we present four major upgrades to SEAL: (1) the testbed has been rebuilt with custom off-axis parabolic mirrors, enabling operation in both near-infrared and visible wavelengths; (2) the suite of wavefront sensors now includes a Shack-Hartmann, transmissive four-sided pyramid, vector-Zernike, and, in the muirSEAL testbed, a photonic lantern; (3) the testbed includes a vector-vortex coronagraph and will soon include a hybrid astrophotonic coronagraph; (4) in addition to its original Keck-heritage RTC, SEAL now includes two additional control software packages: Catkit, originally developed for the HiCAT testbed at the Space Telescope Science Institute, and the RTC Compute And Control for Adaptive Optics (CACAO), originally designed for Subaru/SCExAO. We discuss the performance of the testbed after the reflective rebuild and on-going technology development work at SEAL.

astro-ph.IM↗

arXiv2025

Exploring the Capabilities of Astrophotonics for the Precise Alignment of Segmented Telescopes

The next generation of large telescopes for direct imaging of exoplanets will require segmented primary mirrors. Over both long and short timescales, these telescopes experience segment misalignments which degrade the final science image. Adaptive optics (AO) systems can be used to correct these aberrations in real time. AO systems require wavefront sensors (WFSs) that measure the phase of the incoming light in order to reconstruct optical aberrations. However, most WFSs used for sensing atmospheric turbulence cannot correctly detect aberrations induced by misalignments in segmented telescopes, as they show poor sensitivity to phase discontinuities. We investigate the potential of photonic lanterns (PLs), which are waveguides that allow for the low-loss transmission from multi-mode to multiple single-mode optical signals, for sensing segment misalignments at the focal plane. We assess the ability of PLs to measure piston offsets in segmented mirrors through both simulations and laboratory experiments. We simulate the photonic lantern and demonstrate linear reconstruction on segment pistons. Further, we train a neural network to reconstruct aberrations outside of the linear regime. We experimentally validate reconstruction of segment piston offsets on the Miniature Infrared SEAL (muirSEAL) testbed, which includes a segmented deformable mirror, a PSF imaging branch, and a PL. This work demonstrates the potential of the PL as a compact WFS for future space- and ground-based segmented-mirror telescopes.

astro-ph.IM↗

arXiv2025

Experimental validation of photonic lantern imaging and wavefront sensing performance

Photonic lanterns (PLs) are fiber-based waveguides that are capable of focal-plane wavefront sensing while simultaneously directing light to downstream science instruments. The optimal choice of wavefront reconstruction algorithm has yet to be determined, and likely depends on the particular observing scenario under consideration. Previous work in simulation suggests that PLs can be used for nonlinear wavefront sensing for several applications, including sensing the low-wind effect and correcting large-amplitude aberrations. We present the design of muirSEAL (miniature IR SEAL), a testbed designed to test PL wavefront reconstruction over Zernike modes and segmented-mirror offsets. We demonstrate throughput and linear wavefront reconstruction at multiple f-numbers. We further present initial laboratory imaging of a new photonic lantern fabricated at Lawrence Livermore National Laboratory.

astro-ph.IM↗

arXiv2025

Developments on LLNL's high contrast testbed and Lick/ShaneAO

LLNL has recently setup a High Contrast Testbed (HCT) for AO and exoplanet imaging technology development. We present the various HCT technologies currently under development, including (1) a Wynne corrector, (2) multi-wavefront sensor (WFS) single conjugate AO (SCAO) control. We present HCT testing results of a first Wynne corrector prototype with a self-coherent camera. We present updates on development efforts to design and apply multi-WFS SCAO control to our HCT setup. We also present ongoing HCT deformable mirror and WFS upgrades. Lastly, we present developments for REDWOODS, a project to deploy many of these technologies on-sky on a sub-bench of the Shane AO system at Lick Observatory.

astro-ph.IM↗

arXiv2024

Reconstruction methods for the phase-shifted Zernike wavefront sensor

The Zernike wavefront sensor (ZWFS) stands out as one of the most sensitive optical systems for measuring the phase of an incoming wavefront, reaching photon efficiencies close to the fundamental limit. This quality, combined with the fact that it can easily measure phase discontinuities, has led to its widespread adoption in various wavefront control applications, both on the ground but also for future space-based instruments. Despite its advantages, the ZWFS faces a significant challenge due to its extremely limited dynamic range, making it particularly challenging for ground-based operations. To address this limitation, one approach is to use the ZWFS after a general adaptive optics (AO) system; however, even in this scenario, the dynamic range remains a concern. This paper investigates two optical configurations of the ZWFS: the conventional setup and its phase-shifted counterpart, which generates two distinct images of the telescope pupil. We assess the performance of various reconstruction techniques for both configurations, spanning from traditional linear reconstructors to gradient-descent-based methods. The evaluation encompasses simulations and experimental tests conducted on the Santa cruz Extreme Adaptive optics Lab (SEAL) bench at UCSC. Our findings demonstrate that certain innovative reconstruction techniques introduced in this study significantly enhance the dynamic range of the ZWFS, particularly when utilizing the phase-shifted version.

astro-ph.IM↗

arXiv2024

Implementation and Characterization of the Vector Vortex Coronagraph on the SEAL Testbed

The Santa Cruz Extreme AO Lab (SEAL) testbed is an optical bench meant to design and develop new wavefront control techniques for high-contrast imaging for segmented telescopes. These techniques allow for astronomical efficiency in exoplanet imaging and characterization. SEAL consists of several wavefront sensors (WFS) and deformable mirrors (DM) that are currently performing techniques like predictive control or non-linear reconstruction. In this paper, we present the implementation and characterization of a new coronagraphic branch on SEAL and assess the contrast limitations in the testbed. For our coronagraphic branch, we used a vector vortex coronagraph which has high contrast performance. The W. M. Keck Observatory also uses a vortex coronagraph, allowing us to compare the limitations with our own coronagraph. We relied on the testbed and simulations of the vortex coronagraph to compare performance with expected ones. To create a more reliable simulation, we also injected in our numerical model data collected by a Zernike Wavefront sensor (ZWFS) used to perform fine wavefront sensing on the bench. Now that the coronagraphic branch is aligned on SEAL, we will be able to use contrast as a metric for the performance of wavefront control methods on the bench.

astro-ph.IM↗

arXiv2024

Towards understanding interactions between the AO system and segment co-phasing with the vector-Zernike wavefront sensor on Keck

We extend our previous demonstration of the first on-sky primary mirror segment closed-loop control on Keck using a vector-Zernike wavefront sensor (vZWFS), which improved the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. Segment co-phasing errors contribute to Keck contrast limits and will be necessary to correct for the segmented Extremely Large Telescopes and future space missions. The goal of the post-AO vZWFS on Keck is to monitor and correct segment co-phasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities and is one of the most sensitive WFSs, but has limited dynamic range. The Keck vZWFS consists of a metasurface mask imposing two different phase shifts to orthogonal polarizations, split into two pupil images, extending its dynamic range. We report on the vZWFS closed-loop co-phasing performance and early work towards understanding the interactions between the AO system and segment phasing. We discuss a comparison of the AO performance when co-phasing by aligning segment edges, as is currently done at Keck, compared with aligning to the average phase over the segments, as is done by the vZWFS.

astro-ph.IM↗

arXiv2024

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

Starlight suppression techniques for High-Contrast Imaging (HCI) are crucial to achieving the demanding contrast ratios and inner working angles required for detecting and characterizing exoplanets with a wide range of masses and separations. The advent of photonic technologies provides new opportunities to control the amplitude and phase characteristics of light, with the potential to enhance and control starlight suppression. Here, we present a focal plane optical-fiber-based nulling interferometer working with commercially available components for amplitude and phase modulation. The instrument implements single-mode fiber-coupled elements: a MEMS variable optical attenuator (VOA) matches the on-axis and off-axis starlight amplitude, while a piezoelectric-driven fiber stretcher modifies the optical path difference between the channels to achieve the $π$ phase shift condition for destructive interference. We show preliminary lab results using a narrowband light source working at 632 nm and discuss future opportunities for testing on-sky with the Astrophotonics Advancement Platform at Lick Observatory (APALO) at the Shane 3-m Telescope.

astro-ph.IM↗

arXiv2024

Photonic lantern wavefront reconstruction in a multi-wavefront sensor single-conjugate adaptive optics system

Exoplanet direct imaging using adaptive optics (AO) is often limited by non-common path aberrations (NCPAs) and aberrations that are invisible to traditional pupil-plane wavefront sensors (WFSs). This can be remedied by focal-plane (FP) WFSs that characterize aberrations directly from a final science image. Photonic lanterns (PLs) can act as low-order FPWFSs with the ability to direct some light to downstream science instruments. Using a PL on the SEAL (Santa Cruz Extreme AO Laboratory) high-contrast imaging testbed, we demonstrate (1) linear ranges and (2) closed-loop control. Additionally, we simulate the use of the PL in a multi-wavefront sensor AO system, in which multiple WFSs feed back to the same common-path deformable mirror. Building on previous multi-WFS AO demonstrations on SEAL, we simulate a modulated pyramid WFS to sense aberrations of high spatial order and large amplitude, and the PL to sense low order aberrations including NCPAs. We assess adaptive optics performance in this setting using three different PL wavefront reconstruction algorithms. We also provide a new method to experimentally identify the propagation matrix of a PL, making advanced model-based algorithms practical. This work demonstrates the role of photonic technologies and multi-stage wavefront sensing in the context of extreme AO and high contrast imaging.

astro-ph.IM↗

arXiv2023

Characterization of diamond-turned optics for SCALES

High-contrast imaging has been used to discover and characterize dozens of exoplanets to date. The primary limiting performance factor for these instruments is contrast, the ratio of exoplanet to host star brightness that an instrument can successfully resolve. Contrast is largely determined by wavefront error, consisting of uncorrected atmospheric turbulence and optical aberrations downstream of AO correction. Single-point diamond turning allows for high-precision optics to be manufactured for use in astronomical instrumentation, presenting a cheaper and more versatile alternative to conventional glass polishing. This work presents measurements of wavefront error for diamond-turned aluminum optics in the Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument, a 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. Wavefront error measurements for these optics are used to simulate SCALES' point spread function using physical optics propagation software poppy, showing that SCALES' contrast performance is not limited by wavefront error from internal instrument optics.

astro-ph.IM↗

arXiv2023

Using the Gerchberg-Saxton algorithm to reconstruct non-modulated pyramid wavefront sensor measurements

Adaptive optics (AO) is a technique to improve the resolution of ground-based telescopes by correcting, in real-time, optical aberrations due to atmospheric turbulence and the telescope itself. With the rise of Giant Segmented Mirror Telescopes (GSMT), AO is needed more than ever to reach the full potential of these future observatories. One of the main performance drivers of an AO system is the wavefront sensing operation, consisting of measuring the shape of the above mentioned optical aberrations. Aims. The non-modulated pyramid wavefront sensor (nPWFS) is a wavefront sensor with high sensitivity, allowing the limits of AO systems to be pushed. The high sensitivity comes at the expense of its dynamic range, which makes it a highly non-linear sensor. We propose here a novel way to invert nPWFS signals by using the principle of reciprocity of light propagation and the Gerchberg-Saxton (GS) algorithm. We test the performance of this reconstructor in two steps: the technique is first implemented in simulations, where some of its basic properties are studied. Then, the GS reconstructor is tested on the Santa Cruz Extreme Adaptive optics Laboratory (SEAL) testbed located at the University of California Santa Cruz. This new way to invert the nPWFS measurements allows us to drastically increase the dynamic range of the reconstruction for the nPWFS, pushing the dynamics close to a modulated PWFS. The reconstructor is an iterative algorithm requiring heavy computational burden, which could be an issue for real-time purposes in its current implementation. However, this new reconstructor could still be helpful in the case of many wavefront control operations. This reconstruction technique has also been successfully tested on the Santa Cruz Extreme AO Laboratory (SEAL) bench where it is now used as the standard way to invert nPWFS signal.

astro-ph.IM↗

arXiv2023

First laboratory demonstration of real-time multi-wavefront sensor single conjugate adaptive optics

Exoplanet imaging has thus far enabled studies of wide-orbit ($>$10 AU) giant planet ($>$2 Jupiter masses) formation and giant planet atmospheres, with future 30 meter-class Extremely Large Telescopes (ELTs) needed to image and characterize terrestrial exoplanets. However, current state-of-the-art exoplanet imaging technologies placed on ELTs would still miss the contrast required for imaging Earth-mass habitable-zone exoplanets around low-mass stars by ~100x due to speckle noise--scattered starlight in the science image due to a combination of aberrations from the atmosphere after an adaptive optics (AO) correction and internal to the telescope and instrument. We have been developing a focal plane wavefront sensing technology called the Fast Atmospheric Self-coherent camera Technique (FAST) to address both of these issues; in this work we present the first results of simultaneous first and second stage AO wavefront sensing and control with a Shack Hartmann wavefront sensor (SHWFS) and FAST, respectively, using two common path deformable mirrors. We demonstrate this "multi-WFS single conjugate AO" real-time control at up to 200 Hz loop speeds on the Santa Cruz Extreme AO Laboratory (SEAL) testbed, showing a promising potential for both FAST and similar high-speed diffraction-limited second-stage wavefront sensing technologies to be deployed on current and future observatories, helping to remove speckle noise as the main limitation to ELT habitable exoplanet imaging.

astro-ph.IM↗