arXiv subjects

Dario Pisignano

Publications and source records attributed to Dario Pisignano.

At least 37 records · Page 2Linked to original sources

arXiv2020

Synthesis, crystal structure, polymorphism and microscopic luminescence properties of anthracene derivative compounds

Anthracene derivative compounds are currently investigated because of their unique physical properties (e.g., bright luminescence and emission tunability), which make them ideal candidates for advanced optoelectronic devices. Intermolecular interactions are the basis of the tunability of the optical and electronic properties of these compounds, whose prediction and exploitation benefit from the knowledge of the crystal structure and the packing architecture. Polymorphism can occur due to the weak intermolecular interactions, asking for detailed structural analysis clarifying the origin of observed material property modifications. Here, two silylethyne-substituted anthracene compounds are characterized by single-crystal synchrotron X-ray diffraction, identifying a new polymorph. Additionally, laser confocal microscopy and fluorescence lifetime imaging microscopy confirm the results obtained by the X-ray diffraction characterization, i.e., shifting the substituents towards the external benzene rings of the anthracene unit favours π-π interactions, impacting on both the morphology and the microscopic optical properties of the crystals. The compounds with more isolated anthracene units feature shorter lifetime and emission spectra more similar to those ones of isolated molecules. The crystallographic study, supported by the optical investigation, sheds light on the influence of non-covalent interactions on the crystal packing and luminescence properties of anthracene derivatives, providing a further step towards their efficient use as building blocks in active components of light sources and photonic networks.

cond-mat.mtrl-sci↗

arXiv2020

Non-local cooperative atomic motions that govern dissipation in amorphous tantala unveiled by dynamical mechanical spectroscopy

The mechanisms governing mechanical dissipation in amorphous tantala are studied at microscopic scale via Molecular Dynamics simulations, namely by mechanical spectroscopy in a wide range of temperature and frequency. We find that dissipation is associated with irreversible atomic rearrangements with a sharp cooperative character, involving tens to hundreds of atoms arranged in spatially extended clusters of polyhedra. Remarkably, at low temperature we observe an excess of plastically rearranging oxygen atoms which correlates with the experimental peak in the macroscopic mechanical losses. A detailed structural analysis reveals preferential connections of the irreversibly rearranging polyhedra, corresponding to edge and face sharing. These results might lead to microscopically informed design rules for reducing mechanical losses in relevant materials for structural, optical, and sensing applications.

cond-mat.mtrl-sci↗

arXiv2020

Conformable nanowire-in-nanofiber hybrids for low-threshold optical gain in the ultraviolet

The miniaturization of diagnostic devices that exploit optical detection schemes requires the design of light-sources combining small size, high performance for effective excitation of chromophores, and mechanical flexibility for easy coupling to components with complex and non-planar shapes. Here, ZnO nanowire-in-fiber hybrids with internal architectural order are introduced, exhibiting a combination of polarized stimulated emission, low propagation losses of light modes, and structural flexibility. Ultrafast transient absorption experiments on the electrospun material show optical gain which gives rise to amplified spontaneous emission, with threshold lower than the value found in films. These systems are highly flexible and can conveniently conform to curved surfaces, which makes them appealing active elements for various device platforms, such as bendable lasers, optical networks and sensors, as well as for application in bioimaging, photo-crosslinking, and optogenetics.

physics.app-ph↗

arXiv2019

Printing Flowers? Custom-tailored Photonic Cellulose Films with Engineered Surface Topography

Wrought by nature's wondrous hand, surface topographies are discovered on all length scales in living creatures and serve a variety of functions. Inspired by floral striations, here we developed a scalable means of fabricating custom-tailored photonic cellulose films that contained both cholesteric organization and microscopic wrinkly surface topography. Free-standing films were prepared by molding cellulose nanocrystal ink onto an oriented wrinkled template through evaporation-assisted nanoimprinting lithography, yielding morphology-induced light scattering at a short wavelength as well as optically tunable structural color derived from the helical cellulose matrix. As a result, the interplay between the two photonic structures, grating-like surface and chiral bulk, led to selective scattering of circularly polarized light with specific handedness. Moreover, the wrinkled surface relief on cholesteric cellulose films could be precisely controlled, enabling engineered printing of microscopic patterned images.

cond-mat.soft↗

arXiv2019

Entropic Lattice Boltzmann Model for Charged Leaky Dielectric Multiphase Fluids in Electrified Jets

We present a lattice Boltzmann model for charged leaky dielectric multiphase fluids in the context of electrified jet simulations, which are of interest for a number of production technologies including electrospinning. The role of non-linear rheology on the dynamics of electrified jets is considered by exploiting the Carreau model for pseudoplastic fluids. We report exploratory simulations of charged droplets at rest and under a constant electric field, and we provide results for charged jet formation under electrospinning conditions.

physics.comp-ph↗

arXiv2018

A nanophotonic laser on a graph

Conventional nano-photonic schemes minimise multiple scattering to realise a miniaturised version of beam-splitters, interferometers and optical cavities for light propagation and lasing. Here instead, we introduce a nanophotonic network built from multiple paths and interference, to control and enhance light-matter interaction via light localisation. The network is built from a mesh of subwavelength waveguides, and can sustain localised modes and mirror-less light trapping stemming from interference over hundreds of nodes. With optical gain, these modes can easily lase, reaching $\sim$100 pm linewidths. We introduce a graph solution to the Maxwell's equation which describes light on the network, and predicts lasing action. In this framework, the network optical modes can be designed via the network connectivity and topology, and lasing can be tailored and enhanced by the network shape. Nanophotonic networks pave the way for new laser device architectures, which can be used for sensitive biosensing and on-chip optical information processing.

physics.optics↗

arXiv2018

All-optical switching in dye-doped DNA nanofibers

All-optical switches are introduced which are based on deoxyribonucleic acid (DNA) in the form of electrospun fibers, where DNA is semi-intercalated with a push-pull, luminescent nonlinear pyrazoline derivative. Optical birefringence is found in the organic nanofibers, with fully reversible switching controlled through continuous-wave laser irradiation. The photoinduced signal is remarkably large, with birefringence highlighted by optically-driven refractive index anisotropy approaching 0.001. Sub-millisecond characteristic switching times are found. Integrating dye-intercalated DNA complex systems in organic nanofibers, as convenient and efficient approach to template molecular organization and controlling it by external stimuli, might open new routes for realizing optical logic gates, reconfigurable photonic networks and sensors through physically-transient biopolymer components.

physics.app-ph↗

arXiv2018

Low-defectiveness exfoliation of MoS2 nanoparticles and their embedment in hybrid light-emitting polymer nanofibers

Molybdenum disulfide (MoS2) has been attracting extraordinary attention for its intriguing optical, electronic and mechanical properties. Here we demonstrate hybrid, organic-inorganic light-emitting nanofibers based on MoS2 nanoparticle dopants obtained through a simple and inexpensive sonication process in N-methyl-2-pyrrolidone and successfully encapsulated in polymer filaments. Defectiveness is found to be kept low, and stoichiometry preserved, by the implemented, gentle exfoliation method that allows the MoS2 nanoparticles to be produced. So-achieved hybrid fibers are smooth, uniform, flawless, and exhibit bright and continuous light emission. Moreover, they show significant capability of waveguiding self-emitted light along their longitudinal axis. These findings suggest the use of emissive MoS2 fibers enabled by gentle exfoliation methods as novel and highly promising optical material for building sensing surfaces and as components of photonic circuits.

cond-mat.mtrl-sci↗

arXiv2018

Stacked electrospun polymer nanofiber heterostructures with tailored stimulated emission

We present stacked organic lasing heterostructures made by different species of light-emitting electrospun fibers, each able to provide optical gain in a specific spectral region. A hierarchical architecture is obtained by conformable layers of fibers with disordered two-dimensional organization and three-dimensional compositional heterogeneity. Lasing polymer fibers are superimposed in layers, showing asymmetric optical behavior from the two sides of the organic heterostructure, and tailored and bichromatic stimulated emission depending on the excitation direction. A marginal role of energy acceptor molecules in determining quenching of high-energy donor species is evidenced by luminescence decay time measurements. These findings show that non-woven stacks of light-emitting electrospun fibers doped with different dyes exhibit critically-suppressed Förster resonance energy transfer, limited at joints between different fiber species. This leads to obtain hybrid materials with mostly physically-separated acceptors and donors, thus largely preventing donor quenching and making much easier to achieve simultaneous lasing from multiple spectral bands. Coherent backscattering experiments are also performed on the system, suggesting the onset of random lasing features. These new organic lasing systems might find application in microfluidic devices where flexible and bidirectional excitation sources are needed, optical sensors, and nanophotonics.

cond-mat.mtrl-sci↗

arXiv2018

Nanowire-Intensified MEF in Hybrid Polymer-Plasmonic Electrospun Filaments

Hybrid polymer-plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long-range transport in subwavelength dielectric structures. Here we report on the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal-enhanced fluorescence (MEF) with unique characteristics compared to conventional structures. The intensification effect when the particle is placed in the organic filaments is remarkably higher with respect to thin films of comparable thickness, thus highlighting a specific, nanowire-related enhancement of MEF effects. A dependence on the confinement volume in the dielectric nanowire is also evidenced, with MEF significantly increasing upon reducing the wire diameter. These findings are rationalized by finite element simulations, predicting a position-dependent enhancement of the quantum yield of fluorophores embedded in the fibers. Calculation of the ensemble-averaged fluorescence enhancement unveils the possibility of strongly enhancing the overall emission intensity for structures with size twice the diameter of the embedded metal particles. These new, hybrid fluorescent systems with localized enhanced emission, as well as the general Nanowire-Intensified MEF effect associated to them, are highly relevant for developing nanoscale light-emitting devices with high efficiency and inter-coupled through nanofiber networks, highly sensitive optical sensors, and novel laser architectures.

cond-mat.mtrl-sci↗

arXiv2018

Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunnelling-AFM, Light-Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells

Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM are prepared by electrospinning, and their properties assessed by scanning electron, atomic and lateral force, tunnelling, and confocal microscopy, as well as by attenuated total reflection Fourier transform-infrared spectroscopy, photoluminescence quantum yield and spatially-resolved fluorescence. Highlighted features include ribbon-shape of the realized fibers, and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. This method might be applied to other electron donor-electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.

physics.app-ph↗

arXiv2017

Interplay of Stimulated Emission and Fluorescence Resonance Energy Transfer in Electrospun Light-Emitting Fibers

Concomitant amplified spontaneous emission (ASE) and Förster resonance energy transfer (FRET) are investigated in electrospun light-emitting fibers. Upon dye-doping with a proper FRET couple system, free-standing fibrous mats exhibit tunable FRET efficiency and, more importantly, tailorable threshold conditions for stimulated emission. In addition, effective scattering of light is found in the fibrous material by measuring the transport mean free path of photons by coherent backscattering experiments. The interplay of ASE and FRET leads to high control in designing optical properties from electrospun fibers, including the occurrence of simultaneous stimulated emission from both donor and acceptor components. All tunable-optical properties are highly interesting in view of applying electrospun light-emitting materials in lightening, display, and sensing technologies.

cond-mat.mtrl-sci↗

arXiv2017

Diverse regimes of mode intensity correlation in nanofiber random lasers through nanoparticle doping

Random lasers are based on disordered materials with optical gain. These devices can exhibit either intensity or resonant feedback, relying on diffusive or interference behaviour of light, respectively, which leads to either coupling or independent operation of lasing modes. We study for the first time these regimes in complex, solid-state nanostructured materials. The number of lasing modes and their intensity correlation features are found to be tailorable in random lasers made of light-emitting, electrospun polymer fibers upon nanoparticle doping. By material engineering, directional waveguiding along the length of fibers is found to be relevant to enhance mode correlation in both intensity feedback and resonant feedback random lasing. The here reported findings can be used to establish new design rules for tuning the emission of nano-lasers and correlation properties by means of the compositional and morphological properties of complex nanostructured materials.

physics.app-ph↗

arXiv2017

Stretching graphene using polymeric micro-muscles

The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploiting deformable substrates or external loads. These devices lack, however, the flexibility required to fully control and investigate arbitrary strain profiles. Here, we demonstrate a novel approach making it possible to induce strain in graphene using polymeric micrometric artificial muscles (MAMs) that contract in a controllable and reversible way under an electronic stimulus. Our method exploits the mechanical response of poly-methyl-methacrylate (PMMA) to electron-beam irradiation. Inhomogeneous anisotropic strain and out-of-plane deformation are demonstrated and studied by Raman, scanning-electron and atomic-force microscopy. These can all be easily combined with the present device architecture. The flexibility of the present method opens new opportunities for the investigation of strain and nanomechanics in two-dimensional materials.

cond-mat.mes-hall↗

arXiv2017

Biomineral Amorphous Lasers through Light-Scattering Surfaces Assembled by Electrospun Fiber Templates

New materials aim at exploiting the great control of living organisms over molecular architectures and minerals. Optical biomimetics has been widely developed by microengineering, leading to photonic components with order resembling those found in plants and animals. These systems, however, are realized by complicated and adverse processes. Here we show how biomineralization might enable the one-step generation of components for amorphous photonics, in which light is made to travel through disordered scattering systems, and particularly of active devices such as random lasers, by using electrospun fiber templates. The amount of bio-enzymatically produced silica is related to light-scattering capacity and the resulting organosilica surfaces exhibit a transport mean free path for light as low as 3 micron, and lasing with linewidth below 0.2 nm. The resulting, complex optical material is characterized and modelled to elucidate scattered fields and lasing performance. Tightly-controlled nanofabrication of direct biological inspiration establishes a new concept for the additive manufacturing of engineered light-diffusing materials and photonic components, not addressed by existing technologies.

physics.optics↗

arXiv2017

Effects of Nanoparticles on the Dynamic Morphology of Electrified Jets

We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in electrospinning experiments. It is also shown that even a tiny amount of excess mass, of the order of a few percent, may more than double the radius of the electrospun fiber, with substantial implications for the design of experiments involving electrified jets as well as spun organic fibers.

physics.comp-ph↗

arXiv2017

Nanoparticle-doped electrospun fiber random lasers with spatially extended light modes

Complex assemblies of light-emitting polymer nanofibers with molecular materials exhibiting optical gain can lead to important advance to amorphous photonics and to random laser science and devices. In disordered mats of nanofibers, multiple scattering and waveguiding might interplay to determine localization or spreading of optical modes as well as correlation effects. Here we study electrospun fibers embedding a lasing fluorene-carbazole-fluorene molecule and doped with titania nanoparticles, which exhibit random lasing with sub-nm spectral width and threshold of about 9 mJ cm^-2 for the absorbed excitation fluence. We focus on the spatial and spectral behavior of optical modes in the disordered and non-woven networks, finding evidence for the presence of modes with very large spatial extent, up to the 100 micrometer-scale. These findings suggest emission coupling into integrated nanofiber transmission channels as effective mechanism for enhancing spectral selectivity in random lasers and correlations of light modes in the complex and disordered material.

physics.optics↗

arXiv2017

Effects of Orthogonal Rotating Electric Fields on Electrospinning Process

Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric field orthogonal to the jet direction. Through extensive particle simulations, it is shown that by a proper tuning of the electric field amplitude and frequency, a reduction of up to a $30 \%$ in the aforementioned radius can be obtained, thereby opening new perspectives in the design of future ultra-thin electrospun fibres. Applications can be envisaged in the fields of nanophotonic components as well as for designing new and improved filtration materials.

physics.comp-ph↗