arXiv subjects

Dario Polli

Publications and source records attributed to Dario Polli.

7 recordsLinked to original sources

arXiv2026

A Lightweight Fiducial-Based Pipeline for 3D Hyperspectral Mapping of ex-vivo Lumpectomy Specimens

Hyperspectral Imaging (HSI) is a promising modality for intraoperative assessment of resection margins in Breast-Conserving Surgery (BCS), but its clinical translation requires aligning the inherently 2D spectral information onto the 3D shape of the excised tissue so that suspicious regions can be precisely localized for targeted follow-up. We present a fully automated, calibration-free pipeline that produces a 3D hyperspectral point cloud of an ex-vivo lumpectomy specimen from a set of consumer-camera RGB images and a single top-down HSI acquisition. The 3D geometry is reconstructed with a deep-learning Structure-from-Motion backbone, stabilized in a metric reference frame by a custom bundle adjustment that enforces consistency on the corners of four ArUco markers placed around the specimen. The HSI cube is then registered to the reconstruction without recovering the HSI camera pose: the markers, visible in both modalities, define 16 corner correspondences that drive a planar homography, and 3D coordinates are recovered by lookup on an orthographically rendered depth map. Evaluated on two ex-vivo lumpectomy specimens, the pipeline achieves a median 3D registration error below 1~mm and a 2D reprojection error below 0.02 mm, with a total per-specimen processing time under 4 minutes on accelerated hardware. These results support the feasibility of integrating HSI-guided spatial localization into intraoperative margin assessment workflows for breast-conserving surgery.

cs.CV↗

arXiv2025

Phonon dephasing times determined with time-delayed, broadband CARS

Coherent Raman scattering techniques as coherent anti-Stokes Raman scattering (CARS), offer significant advantages in terms of pixel dwell times and speed as compared to spontaneous Raman scattering for investigations of crystalline materials. However, the spectral information in CARS is often hampered by the presence of a non-resonant contribution to the scattering process that shifts and distorts the Raman peaks. In this work, we apply a method to obtain non-resonant background-free spectra based on time-delayed, broadband CARS (TD-BCARS) using an intra-pulse excitation scheme. In particular, this method can measure the phononic dephasing times across the full phonon spectrum at once. We test the methodology on amorphous SiO2 (glass), which is used to characterize the setup-specific and material-independent response times, and then apply TD-BCARS to the analysis of single crystals of diamond and ferroelectrics of potassium titanyl phosphate (KTP) and potassium titanyl arsenate (KTA). For diamond, we determine a dephasing time of t = 7.81 ps for the single sp3 peak.

cond-mat.mtrl-sci↗

arXiv2025

Broadband Fourier transform spectroscopy of quantum emitters photoluminescence with sub-nanosecond temporal resolution

The spectral characterization of quantum emitter luminescence over broad wavelength ranges and fast timescales is important for applications ranging from biophysics to quantum technologies. Here we present the application of time-domain Fourier transform spectroscopy, based on a compact and stable birefringent interferometer coupled to low-dark-count superconducting single-photon detectors, to the study of quantum emitters. We experimentally demonstrate that the system enables spectroscopy of quantum emitters over a broad wavelength interval from the near-infrared to the telecom range, where grating-based spectrometers coupled to InGaAs cameras are typically noisy and inefficient. We further show that the high temporal resolution of single-photon detectors, which can be on the order of tens of picoseconds, enables the monitoring of spin-dependent spectral changes on sub-nanosecond timescales.

quant-ph↗

arXiv2023

Comparing Transmission- and Epi-BCARS: A Transnational Round Robin on Solid State Materials

Broadband coherent anti-Stokes Raman scattering (BCARS) is an advanced Raman spectroscopy method that combines the spectral sensitivity of spontaneous Raman scattering (SR) with the increased signal intensity of single-frequency coherent Raman techniques. These two features make BCARS particularly suitable for ultra-fast imaging of heterogeneous samples, as already shown in biomedicine. Recent studies demonstrated that BCARS also shows exceptional spectroscopic capabilities when inspecting crystalline materials like lithium niobate and lithium tantalate, and can be used for fast imaging of ferroelectric domain walls. These results strongly suggest the extension of BCARS towards new imaging applications like mapping defects, strain, or dopant levels, similar to standard SR imaging. Despite these advantages, BCARS suffers from a spurious and chemically unspecific non-resonant background (NRB) that distorts and shifts the Raman peaks. Post-processing numerical algorithms are then used to remove the NRB and to obtain spectra comparable to SR results. Here, we show the reproducibility of BCARS by conducting an internal Round Robin with two different BCARS experimental setups, comparing the results on different crystalline materials of increasing structural complexity: diamond, 6H-SiC, KDP, and KTP. First, we compare the detected and phase-retrieved signals, the setup-specific NRB-removal steps, and the mode assignment. Subsequently, we demonstrate the versatility of BCARS by showcasing how the selection of pump wavelength, pulse width, and detection geometry can be tailored to suit the specific objectives of the experiment. Finally, we compare and optimize measurement parameters for the high-speed, hyperspectral imaging of ferroelectric domain walls in lithium niobate.

cond-mat.mtrl-sci↗

arXiv2022

On-chip Brillouin notch filter on a silicon nitride ring resonator

Noncontact Brillouin spectroscopy is a purely optical and label-free method to retrieve fundamental material viscoelastic properties. Recently, the extension to a three-dimensional imaging modality has paved the way to novel exciting opportunities in the biomedical field, yet the detection of the Brillouin spectrum remains challenging as a consequence of the dominant elastic background light that typically overwhelms the inelastic Brillouin peaks. In this Letter, we demonstrate a fully integrated and ultra-compact Brillouin notch filter based on an optical ring resonator fabricated on a silicon nitride platform. Our on-chip ring resonator filter was measured to have a 10 dB extinction ratio and a Q factor of 1.9x10^5. The experimental results provide a proof-of-concept on the ability of the on-chip filter to attenuate the elastic background light, heralding future developments of fully integrated, ultra-compact and low-cost Brillouin spectrometers.

physics.optics↗

arXiv2020

Tuning the Ultrafast Response of Fano Resonances in Halide Perovskite Nanoparticles

The full control of the fundamental photophysics of nanosystems at frequencies as high as few THz is key for tunable and ultrafast nano-photonic devices and metamaterials. Here we combine geometrical and ultrafast control of the optical properties of halide perovskite nanoparticles, which constitute a prominent platform for nanophotonics. The pulsed photoinjection of free carriers across the semiconducting gap leads to a sub-picosecond modification of the far-field electromagnetic properties that is fully controlled by the geometry of the system. When the nanoparticle size is tuned so as to achieve the overlap between the narrowband excitons and the geometry-controlled Mie resonances, the ultrafast modulation of the transmittivity is completely reversed with respect to what is usually observed in nanoparticles with different sizes, in bulk systems and in thin films. The interplay between chemical, geometrical and ultrafast tuning offers an additional control parameter with impact on nano-antennas and ultrafast optical switches.

cond-mat.mtrl-sci↗

arXiv2017

Multimodal Nonlinear Microscope based on a Compact Fiber-format Laser Source

We present a multimodal non-linear optical (NLO) laser-scanning microscope, based on a compact fiber-format excitation laser and integrating coherent anti-Stokes Raman scattering (CARS), stimulated Raman scattering (SRS) and two-photon-excitation fluorescence (TPEF) on a single platform. We demonstrate its capabilities in simultaneously acquiring CARS and SRS images of a blend of 6-μm poly(methyl methacrylate) beads and 3-μm polystyrene beads. We then apply it to visualize cell walls and chloroplast of an unprocessed fresh leaf of Elodea aquatic plant via SRS and TPEF modalities, respectively. The presented NLO microscope, developed in house using off-the-shelf components, offers full accessibility to the optical path and ensures its easy re-configurability and flexibility.

physics.optics↗