arXiv subjects

Daron Westly

Publications and source records attributed to Daron Westly.

26 records · Page 2Linked to original sources

arXiv2018

A Kerr-microresonator optical clockwork

Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which stably circulate in a Kerr microresonator, have emerged as a source of coherent, ultrafast pulse trains and ultra-broadband optical-frequency combs. Using the f-2f technique, Kerr combs support carrier-envelope-offset phase stabilization for optical synthesis and metrology. In this paper, we introduce a Kerr-microresonator optical clockwork based on optical-frequency division (OFD), which is a powerful technique to transfer the fractional-frequency stability of an optical clock to a lower frequency electronic clock signal. The clockwork presented here is based on a silicon-nitride (Si$_3$N$_4$) microresonator that supports an optical-frequency comb composed of soliton pulses at 1 THz repetition rate. By electro-optic phase modulation of the entire Si$_3$N$_4$ comb, we arbitrarily generate additional CW modes between the Si$_3$N$_4$ comb modes; operationally, this reduces the pulse train repetition frequency and can be used to implement OFD to the microwave domain. Our experiments characterize the residual frequency noise of this Kerr-microresonator clockwork to one part in $10^{17}$, which opens the possibility of using Kerr combs with high performance optical clocks. In addition, the photonic integration and 1 THz resolution of the Si$_3$N$_4$ frequency comb makes it appealing for broadband, low-resolution liquid-phase absorption spectroscopy, which we demonstrate with near infrared measurements of water, lipids, and organic solvents.

physics.optics↗

arXiv2018

Tunable mid-infrared generation via wide-band four wave mixing in silicon nitride waveguides

We experimentally demonstrate wide-band (>100 THz) frequency down-conversion of near-infrared (NIR) femtosecond-scale pulses from an Er:fiber laser to the mid-infrared (MIR) using four-wave-mixing (FWM) in photonic-chip silicon-nitride waveguides. The engineered dispersion in the nanophotonic geometry, along with the wide transparency range of silicon nitride, enables large-detuning FWM phase-matching and results in tunable MIR from 2.6-3.6 um on a single chip with 100-pJ-scale pump-pulse energies. Additionally, we observe > 20 dB broadband parametric gain for the NIR pulses when the FWM process is operated in a frequency up-conversion configuration. Our results demonstrate how integrated photonic circuits could realize multiple nonlinear optical phenomena on the same chip and lead to engineered synthesis of broadband, tunable, and coherent light across the NIR and MIR wavelength bands from fiber-based pumps.

physics.app-ph↗

arXiv2018

Self-organized nonlinear gratings for ultrafast nanophotonics

Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond pulses propagating through nanophotonic waveguides, providing simultaneous group-velocity matching and quasi-phase-matching for second harmonic generation. We record the first direct microscopy images of photo-induced nonlinear gratings, and demonstrate how these waveguides enable simultaneous $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes, which we utilize to stabilize a laser frequency comb. Finally, we derive the equations that govern self-organized grating formation for femtosecond pulses and explain the crucial role of group-velocity matching. In the future, such nanophotonic waveguides could enable scalable, reconfigurable nonlinear optical systems.

physics.optics↗

arXiv2018

Phased-Locked Two-Color Single Soliton Microcombs in Dispersion-Engineered Si3N4 Resonators

We propose and theoretically investigate a dispersion-engineered Si3N4 microring resonator, based on a cross-section containing a partially-etched trench, that supports phase-locked, two-color soliton microcomb states. These soliton states consist of a single circulating intracavity pulse with a modulated envelope that sits on a continuous wave background. Such temporal waveforms produce a frequency comb whose spectrum is spread over two widely-spaced spectral windows, each exhibiting a squared hyperbolic secant envelope, with the two windows phase-locked to each other via Cherenkov radiation. The first spectral window is centered around the 1550 nm pump, while the second spectral window is tailored based on straightforward geometric control, and can be centered as short as 750 nm and as long as 3000 nm. We numerically analyze the robustness of the design to parameter variation, and consider its implications to self-referencing and visible wavelength comb generation.

physics.optics↗

arXiv2017

Quasi-phase-matched supercontinuum-generation in photonic waveguides

Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally demonstrate quasi-phase-matched supercontinuum to the TE20 and TE00 waveguide modes, which enhances the intensity of the SCG in specific spectral regions by as much as 20 dB. We utilize higher-order quasi-phase-matching (up to the 16th order) to enhance the intensity in numerous locations across the spectrum. Quasi-phase-matching adds a unique dimension to the design-space for SCG waveguides, allowing the spectrum to be engineered for specific applications.

physics.optics↗

arXiv2017

An Integrated-Photonics Optical-Frequency Synthesizer

Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.

physics.app-ph↗

arXiv2017

Self-referenced frequency combs using high-efficiency silicon-nitride waveguides

We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.

physics.optics↗

arXiv2017

Photonic-chip supercontinuum with tailored spectra for precision frequency metrology

Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applications in frequency metrology and precision spectroscopy, it is desirable to not only support self-referencing, but also to generate low-noise combs with customizable broadband spectra. In this work, we demonstrate dispersion-engineered waveguides based on silicon nitride that are designed to meet these goals and enable precision optical metrology experiments across large wavelength spans. We perform a clock comparison measurement and report a clock-limited relative frequency instability of $3.8\times10^{-15}$ at $τ= 2$ seconds between a 1550 nm cavity-stabilized reference laser and NIST's calcium atomic clock laser at 657 nm using a two-octave waveguide-supercontinuum comb.

physics.optics↗