Searcharxiv⌕ Search

arXiv subjects

David A. B. Miller

Publications and source records attributed to David A. B. Miller.

46 records · Page 3Linked to original sources

Attojoule Optoelectronics for Low-Energy Information Processing and Communications: a Tutorial Review

Optics offers unique opportunities for reducing energy in information processing and communications while resolving the problem of interconnect bandwidth density inside machines. Such energy dissipation overall is now at environmentally significant levels; the source of that dissipation is progressively shifting from logic operations to interconnect energies. Without the prospect of substantial reduction in energy per bit communicated, we cannot continue the exponential growth of our use of information. The physics of optics and optoelectronics fundamentally addresses both interconnect energy and bandwidth density, and optics may be the only scalable solution to such problems. Here we summarize the corresponding background, status, opportunities, and research directions for optoelectronic technology and novel optics, including sub-femtojoule devices in waveguide and novel 2D array optical systems. We compare different approaches to low-energy optoelectronic output devices and their scaling, including lasers, modulators and LEDs, optical confinement approaches (such as resonators) to enhance effects, and the benefits of different material choices, including 2D materials and other quantum-confined structures. Beyond the elimination of line charging by the use optical connections, the next major interconnect dissipations are in the electronic circuits for receiver amplifiers, timing recovery and multiplexing. We can address these through the integration of photodetectors to reduce or eliminate receiver circuit energies, free-space optics to eliminate the need for timing and multiplexing circuits (while solving bandwidth density problems), and using optics generally to save power by running large synchronous systems. One target concept is interconnects from ~ 1 cm to ~ 10 m that have the same energy (~ 10fJ/bit) and simplicity as local electrical wires on chip.

physics.optics↗

60dB high-extinction auto-configured Mach--Zehnder interferometer

Imperfections in integrated photonics manufacturing have a detrimental effect on the maximal achievable visibility in interferometric architectures. These limits have profound implications for further photonics technological developments and in particular for quantum photonics technologies. Active optimisation approaches, together with reconfigurable photonics, have been proposed as a solution to overcome this. In this paper, we demonstrate an ultra-high (>60 dB) extinction ratio in a silicon photonic device consisting of cascaded Mach-Zehnder interferometers, in which additional interferometers function as variable beamsplitters. The imperfections of fabricated beamsplitters are compensated using an automated progressive optimization algorithm with no requirement for pre-calibration. This work shows the possibility of integrating and accurately controlling linear-optical components for large-scale quantum information processing and other applications.

physics.optics↗

Self-Configuring Universal Linear Optical Component

We show how to design an optical device that can perform any linear function or coupling between inputs and outputs. This design method is progressive, requiring no global optimization. We also show how the device can configure itself progressively, avoiding design calculations and allowing the device to stabilize itself against drifts in component properties and to continually adjust itself to changing conditions. This self-configuration operates by training with the desired pairs of orthogonal input and output functions, using sets of detectors and local feedback loops to set individual optical elements within the device, with no global feedback or multiparameter optimization required. Simple mappings, such as spatial mode conversions and polarization control, can be implemented using standard planar integrated optics. In the spirit of a universal machine, we show that other linear operations, including frequency and time mappings, as well as non-reciprocal operation, are possible in principle, even if very challenging in practice, thus proving there is at least one constructive design for any conceivable linear optical component; such a universal device can also be self-configuring. This approach is general for linear waves, and could be applied to microwaves, acoustics and quantum mechanical superpositions.

physics.optics↗

Self-aligning universal beam coupler

We propose a device that can take an arbitrary monochromatic input beam and couple it into a single-mode guide or beam. Simple feedback loops from detectors to modulator elements allow the device to adapt automatically to any specific input beam form. Potential applications include automatic compensation for misalignment and defocusing of an input beam, coupling of complex modes or multiple beams from fibers or free space to single-mode guides, and retaining coupling to a moving source. Straightforward extensions allow multiple different overlapping orthogonal input beams to be separated simultaneously to different single-mode guides with no splitting loss in principle. The approach is suitable for implementation in integrated optics platforms that offer elements such as phase shifters, Mach-Zehnder interferometers, grating couplers, and integrated monitoring detectors, and the basic approach is applicable in principle to other types of waves, such as microwaves or acoustics.

physics.optics↗

How complicated must an optical component be?

We analyze how complicated a linear optical component has to be if it is to perform one of a range of functions. Specifically, we devise an approach to evaluating the number of real parameters that must be specified in the device design or fabrication, based on the singular value decomposition of the linear operator that describes the device. This approach can be used for essentially any linear device, including space-, frequency-, or time-dependent systems, in optics or in other linear wave problems. We analyze examples including spatial mode converters and various classes of wavelength demultiplexers. We consider limits on the functions that can be performed by simple optical devices such as thin lenses, mirrors, gratings, modulators, and fixed optical filters, and discuss the potential for greater functionalities using modern nanophotonics.

physics.optics↗

All linear optical devices are mode converters

We show that every linear optical component can be completely described as a device that converts one set of orthogonal input modes, one by one, to a matching set of orthogonal output modes. This result holds for any linear optical structure with any specific variation in space and/or time of its structure. There are therefore preferred orthogonal "mode converter" basis sets of input and output functions for describing any linear optical device, in terms of which the device can be described by a simple diagonal operator. This result should help us understand what linear optical devices we can and cannot make. As illustrations, we use this approach to derive a general expression for the alignment tolerance of an efficient mode coupler and to prove that loss-less combining of orthogonal modes is impossible.

physics.optics↗

Tensile-Strained Germanium-on-Insulator Substrate Fabrication for Silicon-Compatible Optoelectronics

We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strain of 0.16% is verified by XRD. Suitability for device manufacturing is demonstrated through fabrication and characterization of metal-semiconductor-metal photodetectors that exhibit photoresponse beyond 1.55 μm. The substrate fabrication process is compatible with complementary metal-oxide-semiconductor manufacturing and represents a potential route to wafer-scale integration of silicon-compatible optoelectronics.

physics.optics↗

Electrically controlled modulation in a photonic crystal nanocavity

We describe a compact modulator based on a planar photonic crystal nanocavity whose resonance is electrically controlled. A forward bias applied across a p-i-n diode shifts the cavity into and out of resonance with a continuous-wave laser field in a waveguide. The sub-micron size of the nanocavity promises extremely low capacitance, high bandwidth, and efficient on-chip integration in optical interconnects.

physics.optics↗

Modal Analysis and Coupling in Metal-Insulator-Metal Waveguides

This paper shows how to analyze plasmonic metal-insulator-metal waveguides using the full modal structure of these guides. The analysis applies to all frequencies, particularly including the near infrared and visible spectrum, and to a wide range of sizes, including nanometallic structures. We use the approach here specifically to analyze waveguide junctions. We show that the full modal structure of the metal-insulator-metal (MIM) waveguides--which consists of real and complex discrete eigenvalue spectra, as well as the continuous spectrum--forms a complete basis set. We provide the derivation of these modes using the techniques developed for Sturm-Liouville and generalized eigenvalue equations. We demonstrate the need to include all parts of the spectrum to have a complete set of basis vectors to describe scattering within MIM waveguides with the mode-matching technique. We numerically compare the mode-matching formulation with finite-difference frequency-domain analysis and find very good agreement between the two for modal scattering at symmetric MIM waveguide junctions. We touch upon the similarities between the underlying mathematical structure of the MIM waveguide and the PT symmetric quantum mechanical pseudo-Hermitian Hamiltonians. The rich set of modes that the MIM waveguide supports forms a canonical example against which other more complicated geometries can be compared. Our work here encompasses the microwave results, but extends also to waveguides with real metals even at infrared and optical frequencies.

physics.optics↗

Fundamental Limit to Linear One-Dimensional Slow Light Structures

Using a new general approach to limits in optical structures that counts orthogonal waves generated by scattering, we derive an upper limit to the number of bits of delay possible in one-dimensional slow light structures that are based on linear optical response to the signal field. The limit is essentially the product of the length of the structure in wavelengths and the largest relative change in dielectric constant anywhere in the structure at any frequency of interest. It holds for refractive index, absorption or gain variations with arbitrary spectral or spatial form. It is otherwise completely independent of the details of the structure's design, and does not rely on concepts of group velocity or group delay.

physics.optics↗