Searcharxiv⌕ Search

arXiv subjects

David B. Newell

Publications and source records attributed to David B. Newell.

30 records · Page 2Linked to original sources

Examining Experimental Raman Mode Behavior in Mono- and Bi-layer 2H-TaSe$_{2}$ via Density Functional Theory

Tantalum diselenide (TaSe$_{2}$) is a metallic transition metal dichalcogenide whose equilibrium structure and vibrational behavior strongly depends on temperature and thickness, including the emergence of charge density wave (CDW) states at very low T. In this work, observed modes for mono- and bi-layer are described across several spectral regions and com-pared to the bulk ones. Such modes, including an experimentally observed forbidden Raman mode and low frequency CDW modes, are then matched to corresponding density functional theory (DFT) predicted vibrations, to unveil their inner working. The excellent match between experimental and computational results justifies the presented vibrational visualizations of these modes. Additional support is provided by experimental phonons seen in Raman spectra as a function of temperature and thickness. These results highlight the importance of understanding interlayer interactions and their effects on mode behaviors.

cond-mat.mtrl-sci↗

Magnet system for the Quantum Electro-Mechanical Metrology Suite

The design of the permanent magnet system for the new Quantum Electro-Mechanical Metrology Suite (QEMMS) is described. The QEMMS, developed at the National Institute of Standards and Technology (NIST), consists of a Kibble balance, a programmable Josephson voltage standard, and a quantum Hall resistance standard. It will be used to measure masses up to $100\,\mathrm{g}$ with relative uncertainties below $2\times 10^{-8}$. The magnet system is based on the design of the NIST-4 magnet system with significant changes to adopt to a smaller Kibble balance and to overcome known practical limitations. Analytical models are provided to describe the coil-current effect and model the forces required to split the magnet in two parts to install the coil. Both models are compared to simulation results obtained with finite element analysis and measurement results. Other aspects, such as the coil design and flatness of $Bl$ profile are considered.

physics.ins-det↗

Confocal laser scanning microscopy: A tool for rapid optical characterization of 2D materials

Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanced optical contrast and mapping of thickness down to a single layer. We demonstrate the effectiveness of CLSM by measuring mechanically exfoliated and chemical vapor deposition graphene on Si/SiO2, and epitaxial graphene on SiC. In the case of graphene on Si/SiO2, both CLSM intensity and height mapping is powerful for analysis of 1-5 layers of graphene. For epitaxial graphene on SiC substrates, the CLSM intensity allows us to distinguish features such as dense, parallel 150 nm wide ribbons of graphene (associated with the early stages of the growth process) and large regions covered by the interfacial layer and 1-3 layers of graphene. In both cases, CLSM data shows excellent correlation with conventional optical microscopy, atomic force microscopy, Kelvin probe force microscopy, conductive atomic force microscopy, scanning electron microscopy and Raman mapping, with a greatly reduced acquisition time. We demonstrate that CLSM is an indispensable tool for rapid analysis of mass-produced graphene and is equally relevant to other 2D materials.

physics.app-ph↗

Rapid characterization of wafer-scale 2D material: Epitaxial graphene and graphene nanoribbons on SiC

We demonstrate that the confocal laser scanning microscopy (CLSM) provides a non-destructive, highly-efficient characterization method for large-area epitaxial graphene and graphene nanostructures on SiC substrates, which can be applied in ambient air without sample preparation and is insusceptible to surface charging or surface contamination. Based on the variation of reflected intensity from regions covered by interfacial layer, single layer, bilayer, or few layer graphene, and through the correlation to the results from Raman spectroscopy and SPM, CLSM images with a high resolution (around 150 nm) reveal that the intensity contrast has distinct feature for undergrown graphene (mixing of dense, parallel graphene nanoribbons and interfacial layer), continuous graphene, and overgrown graphene. Moreover, CLSM has a real acquisition time hundreds of times faster per unit area than the supplementary characterization methods. We believe that the confocal laser scanning microscope will be an indispensable tool for mass-produced epitaxial graphene or applicable 2D materials.

physics.app-ph↗

"What is The SI?" A Proposal for an Educational Adjunct to the SI Redefinition

We discuss how the likely 2018 redefinition of the SI system of units might affect the ability of students to understand the link between the units and the new system. The likely redefinition will no longer define a set of base units, but rather a set of constants of nature, such as the speed of light c and a particular hyperfine splitting in Cs $Δν(^{133}$Cs)$_{hfs}$. We point out that this list of constants need not be the only way to introduce students to the subject, either in class or in textbooks. We suggest an alternative way to introduce high school and undergraduate students to the redefined SI, by suggesting a list of experiments for some units; this list would be completely compatible with the redefined SI, and would have all of the same scientific and technological advantages. We demonstrate by questionnaire results that this alternative is more appealing to students. We hope to spur a discussion amongst teachers regarding this important topic for high school and undergraduate physics courses.

physics.ed-ph↗

CODATA Recommended Values of the Fundamental Physical Constants: 2014

This report gives the 2014 self-consistent set of values of the constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA). These values are based on a least-squares adjustment that takes into account all data available up to 31 December 2014. The recommended values may also be found on the World Wide Web at physics.nist.gov/constants.

physics.atom-ph↗

Pseudomagnetic Fields in a Locally Strained Graphene Drumhead

Recent experiments reveal that a scanning tunneling microscopy (STM) probe tip can generate a highly localized strain field in a graphene drumhead, which in turn leads to pseudomagnetic fields in the graphene that can spatially confine graphene charge carriers in a way similar to a lithographically defined quantum dot (QD). While these experimental findings are intriguing, their further implementation in nanoelectronic devices hinges upon the knowledge of key underpinning parameters, which still remain elusive. In this paper, we first summarize the experimental measurements of the deformation of graphene membranes due to interactions with the STM probe tip and a back gate electrode. We then carry out systematic coarse grained, (CG), simulations to offer a mechanistic interpretation of STM tip-induced straining of the graphene drumhead. Our findings reveal the effect of (i) the position of the STM probe tip relative to the graphene drumhead center, (ii) the sizes of both the STM probe tip and graphene drumhead, as well as (iii) the applied back-gate voltage, on the induced strain field and corresponding pseudomagnetic field. These results can offer quantitative guidance for future design and implementation of reversible and on-demand formation of graphene QDs in nanoelectronics.

cond-mat.mes-hall↗

Low Carrier Density Epitaxial Graphene Devices On SiC

Monolayer epitaxial graphene (EG) grown on hexagonal Si-terminated SiC substrates is intrinsically electron-doped (carrier density is about 10^13 cm^(-2)). We demonstrate a clean device fabrication process using a precious-metal protective layer, and show that etching with aqua regia results in p-type (hole) molecular doping of our un-gated, contamination-free EG. Devices fabricated by this simple process can reach a carrier density in the range of 10^10 cm^(-2) to 10^11 cm^(-2) with mobility about 8000 cm^2/V/s or higher. In a moderately doped device with a carrier density n = 2.4 x 10^11 cm^(-2) and mobility = 5200 cm^2/V/s, we observe highly developed quantized Hall resistance plateaus with filing factor of 2 at magnetic field strengths of less than 4 T. Doping concentrations can be restored to higher levels by heat treatment in Ar, while devices with both p-type and n-type majority carriers tend to drift toward lower carrier concentrations in ambient air.

cond-mat.mes-hall↗

CODATA Recommended Values of the Fundamental Physical Constants: 2010

This paper gives the 2010 self-consistent set of values of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. The 2010 adjustment takes into account the data considered in the 2006 adjustment as well as the data that became available from 1 January 2007, after the closing date of that adjustment, until 31 December 2010, the closing date of the new adjustment. Further, it describes in detail the adjustment of the values of the constants, including the selection of the final set of input data based on the results of least-squares analyses. The 2010 set replaces the previously recommended 2006 CODATA set and may also be found on the World Wide Web at physics.nist.gov/constants.

physics.atom-ph↗

Microscopic Polarization in Bilayer Graphene

Bilayer graphene has drawn significant attention due to the opening of a band gap in its low energy electronic spectrum, which offers a promising route to electronic applications. The gap can be either tunable through an external electric field or spontaneously formed through an interaction-induced symmetry breaking. Our scanning tunneling measurements reveal the microscopic nature of the bilayer gap to be very different from what is observed in previous macroscopic measurements or expected from current theoretical models. The potential difference between the layers, which is proportional to charge imbalance and determines the gap value, shows strong dependence on the disorder potential, varying spatially in both magnitude and sign on a microscopic level. Furthermore, the gap does not vanish at small charge densities. Additional interaction-induced effects are observed in a magnetic field with the opening of a subgap when the zero orbital Landau level is placed at the Fermi energy.

cond-mat.mes-hall↗

Evolution of Microscopic Localization in Graphene in a Magnetic Field from Scattering Resonances to Quantum Dots

Graphene is a unique two-dimensional material with rich new physics and great promise for applications in electronic devices. Physical phenomena such as the half-integer quantum Hall effect and high carrier mobility are critically dependent on interactions with impurities/substrates and localization of Dirac fermions in realistic devices. We microscopically study these interactions using scanning tunneling spectroscopy (STS) of exfoliated graphene on a SiO2 substrate in an applied magnetic field. The magnetic field strongly affects the electronic behavior of the graphene; the states condense into welldefined Landau levels with a dramatic change in the character of localization. In zero magnetic field, we detect weakly localized states created by the substrate induced disorder potential. In strong magnetic field, the two-dimensional electron gas breaks into a network of interacting quantum dots formed at the potential hills and valleys of the disorder potential. Our results demonstrate how graphene properties are perturbed by the disorder potential; a finding that is essential for both the physics and applications of graphene.

cond-mat.mes-hall↗

CODATA Recommended Values of the Fundamental Physical Constants: 2006

This paper gives the 2006 self-consistent set of the basic constants and conversion factors of physics and chemistry recommended by the Committee on Data for Science and Technology (CODATA) for international use. Further, it describes in detail the adjustment of the values of the constants, including the selection of the final set of input data based on the results of least-squares analyses. The 2006 adjustment takes into account the data considered in the 2002 adjustment as well as the data that became available between 31 December 2002, the closing date of that adjustment, and 31 December 2006, the closing date of the new adjustment. The new data have led to a significant reduction in the uncertainties of many recommended values. The 2006 set replaces the previously recommended 2002 CODATA set and also may be found on the World Wide Web at physics.nist.gov/constants.

physics.atom-ph↗