arXiv subjects

David Brooks

Publications and source records attributed to David Brooks.

At least 235 records · Page 13Linked to original sources

arXiv2019

Focal Plate Structure Alignment of the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the Baryon Acoustic Oscillation (BAO) technique. The spectra of 35 million galaxies and quasars over $14000 \,\text{deg}^2$ will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 robotically positioned optic fibres. The fibres in turn feed ten broadband spectrographs. Proper alignment of focal plate structure, mainly consisting of a focal plate ring (FPR) and ten focal plate petals (FPP), is crucial in ensuring minimal loss of light in the focal plane. A coordinate measurement machine (CMM) metrology-based approach to alignment requires comprehensive characterisation of critical dimensions of the petals and the ring, all of which were 100% inspected. The metrology data not only served for quality assurance (QA), but also, with careful modelling of geometric transformations, informed the initial choice of integration accessories such as gauge blocks, pads, and shims. The integrated focal plate structure was inspected again on a CMM, and each petal was adjusted according to the updated focal plate metrology data until all datums were extremely close to nominal positions and optical throughput nearly reached the theoretically best possible value. This paper presents our metrology and alignment methodology and complete results for twelve official DESI petals. The as-aligned, total RMS optical throughput for 6168 positioner holes of twelve production petals was indirectly measured to be $99.88 \pm 0.12 \%$, well above the 99.5% project requirement. The successful alignment fully demonstrated the wealth of data, reproducibility, and micron-level precision made available by our CMM metrology-based approach.

astro-ph.IM↗

arXiv2019

Astro2020 APC White Paper: The MegaMapper: a z > 2 spectroscopic instrument for the study of Inflation and Dark Energy

MegaMapper is a proposed ground-based experiment to measure Inflation parameters and Dark Energy from galaxy redshifts at 2<z<5. A 6.5-m Magellan telescope will be coupled with DESI spectrographs to achieve multiplexing of 20,000. MegaMapper would be located at Las Campanas Observatory to fully access LSST imaging for target selection.

astro-ph.IM↗

arXiv2019

Spectral Variability of a Sample of Extreme Variability Quasars and Implications for the MgII Broad-line Region

We present new Gemini/GMOS optical spectroscopy of 16 extreme variability quasars (EVQs) that dimmed by more than 1.5 mag in the $g$ band between the Sloan Digital Sky Survey (SDSS) and the Dark Energy Survey (DES) epochs (separated by a few years in the quasar rest frame). The quasar sample covers a redshift range of $0.5 < z < 2.1$. Nearly half of these EVQs brightened significantly (by more than 0.5 mag in the $g$ band) in a few years after reaching their previous faintest state, and some EVQs showed rapid (non-blazar) variations of greater than 1-2 mag on timescales of only months. Leveraging on the large dynamic range in continuum variability between the earlier SDSS and the new GMOS spectra, we explore the associated variations in the broad Mg II,$\lambda2798$ line, whose variability properties have not been well studied before. The broad Mg II flux varies in the same direction as the continuum flux, albeit with a smaller amplitude, which indicates at least some portion of Mg II is reverberating to continuum changes. However, the width (FWHM) of Mg II does not vary accordingly as continuum changes for most objects in the sample, in contrast to the case of the broad Balmer lines. Using the width of broad Mg II to estimate the black hole mass therefore introduces a luminosity-dependent bias.

astro-ph.GA↗

arXiv2019

The Buzzard Flock: Dark Energy Survey Synthetic Sky Catalogs

We present a suite of 18 synthetic sky catalogs designed to support science analysis of galaxies in the Dark Energy Survey Year 1 (DES Y1) data. For each catalog, we use a computationally efficient empirical approach, ADDGALS, to embed galaxies within light-cone outputs of three dark matter simulations that resolve halos with masses above ~5x10^12 h^-1 m_sun at z <= 0.32 and 10^13 h^-1 m_sun at z~2. The embedding method is tuned to match the observed evolution of galaxy counts at different luminosities as well as the spatial clustering of the galaxy population. Galaxies are lensed by matter along the line of sight --- including magnification, shear, and multiple images --- using CALCLENS, an algorithm that calculates shear with 0.42 arcmin resolution at galaxy positions in the full catalog. The catalogs presented here, each with the same LCDM cosmology (denoted Buzzard), contain on average 820 million galaxies over an area of 1120 square degrees with positions, magnitudes, shapes, photometric errors, and photometric redshift estimates. We show that the weak-lensing shear catalog, redMaGiC galaxy catalogs and redMaPPer cluster catalogs provide plausible realizations of the same catalogs in the DES Y1 data by comparing their magnitude, color and redshift distributions, angular clustering, and mass-observable relations, making them useful for testing analyses that use these samples. We make public the galaxy samples appropriate for the DES Y1 data, as well as the data vectors used for cosmology analyses on these simulations.

astro-ph.CO↗

arXiv2019

Correcting for Fibre Assignment Incompleteness in the DESI Bright Galaxy Survey

The Dark Energy Spectroscopic Instrument (DESI) Bright Galaxy Survey (BGS) will be a survey of bright, low redshift galaxies, which is planned to cover an area of ~14,000 sq deg in 3 passes. Each pass will cover the survey area with ~2000 pointings, each of area ~8 sq deg. The BGS is currently proposed to consist of a bright high priority sample to an r-band magnitude limit r ~ 19.5, with a fainter low priority sample to r ~ 20. The geometry of the DESI fibre positioners in the focal plane of the telescope affects the completeness of the survey, and has a non-trivial impact on clustering measurements. Using a BGS mock catalogue, we show that completeness due to fibre assignment primarily depends on the surface density of galaxies. Completeness is high (>95%) in low density regions, but very low (<10%) in the centre of massive clusters. We apply the pair inverse probability (PIP) weighting correction to clustering measurements from a BGS mock which has been through the fibre assignment algorithm. This method is only unbiased if it is possible to observe every galaxy pair. To facilitate this, we randomly promote a small fraction of the fainter sample to be high priority, and dither the set of tile positions by a small angle. We show that inverse pair weighting combined with angular upweighting provides an unbiased correction to galaxy clustering measurements for the complete 3 pass survey, and also after 1 pass, which is highly incomplete.

astro-ph.CO↗

arXiv2018

Candidate Massive Galaxies at $z \sim 4$ in the Dark Energy Survey

Using stellar population models, we predicted that the Dark Energy Survey (DES) - due to its special combination of area (5000 deg. sq.) and depth ($i = 24.3$) - would be in the position to detect massive ($\gtrsim 10^{11}$ M$_{\odot}$) galaxies at $z \sim 4$. We confront those theoretical calculations with the first $\sim 150$ deg. sq. of DES data reaching nominal depth. From a catalogue containing $\sim 5$ million sources, $\sim26000$ were found to have observed-frame $g-r$ vs $r-i$ colours within the locus predicted for $z \sim 4$ massive galaxies. We further removed contamination by stars and artefacts, obtaining 606 galaxies lining up by the model selection box. We obtained their photometric redshifts and physical properties by fitting model templates spanning a wide range of star formation histories, reddening and redshift. Key to constrain the models is the addition, to the optical DES bands $g$, $r$, $i$, $z$, and $Y$, of near-IR $J$, $H$, $K_{s}$ data from the Vista Hemisphere Survey. We further applied several quality cuts to the fitting results, including goodness of fit and a unimodal redshift probability distribution. We finally select 233 candidates whose photometric redshift probability distribution function peaks around $z\sim4$, have high stellar masses ($\log($M$^{*}$/M$_{\odot})\sim 11.7$ for a Salpeter IMF) and ages around 0.1 Gyr, i.e. formation redshift around 5. These properties match those of the progenitors of the most massive galaxies in the local universe. This is an ideal sample for spectroscopic follow-up to select the fraction of galaxies which is truly at high redshift. These initial results and those at the survey completion, which we shall push to higher redshifts, will set unprecedented constraints on galaxy formation, evolution, and the re-ionisation epoch.

astro-ph.GA↗

arXiv2018

Astrometry and Occultation predictions to Trans-Neptunian and Centaur Objects observed within the Dark Energy Survey

Transneptunian objects (TNOs) are a source of invaluable information to access the history and evolution of the outer solar system. However, observing these faint objects is a difficult task. As a consequence, important properties such as size and albedo are known for only a small fraction of them. Now, with the results from deep sky surveys and the Gaia space mission, a new exciting era is within reach as accurate predictions of stellar occultations by numerous distant small solar system bodies become available. From them, diameters with kilometer accuracies can be determined. Albedos, in turn, can be obtained from diameters and absolute magnitudes. We use observations from the Dark Energy Survey (DES) from November 2012 until February 2016, amounting to 4292847 CCD frames. We searched them for all known small solar system bodies and recovered a total of 202 TNOs and Centaurs, 63 of which have been discovered by the DES collaboration until the date of this writing. Their positions were determined using the Gaia Data Release 2 as reference and their orbits were refined. Stellar occultations were then predicted using these refined orbits plus stellar positions from Gaia. These predictions are maintained, and updated, in a dedicated web service. The techniques developed here are also part of an ambitious preparation to use the data from the Large Synoptic Survey Telescope (LSST), that expects to obtain accurate positions and multifilter photometry for tens of thousands of TNOs.

astro-ph.EP↗

arXiv2018

Design and production of the DESI fibre cables

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryonic Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fibre optic positioners. The fibres in turn feed 10 broad-band spectrographs. We will describe the design and production progress on the fibre cables, strain relief system and preparation of the slit end. In contrast to former projects, the larger scale of production required for DESI requires teaming up with industry to find a solution to reduce the time scale of production as well as to minimise the stress on the optical fibres.

astro-ph.IM↗

arXiv2018

Unbiased clustering estimates with the DESI fibre assignment

The Emission Line Galaxy survey made by the Dark Energy Spectroscopic Instrument (DESI) survey will be created from five passes of the instrument on the sky. On each pass, the constrained mobility of the ends of the fibres in the DESI focal plane means that the angular-distribution of targets that can be observed is limited. Thus, the clustering of samples constructed using a limited number of passes will be strongly affected by missing targets. In two recent papers, we showed how the effect of missing galaxies can be corrected when calculating the correlation function using a weighting scheme for pairs. Using mock galaxy catalogues we now show that this method provides an unbiased estimator of the true correlation function for the DESI survey after any number of passes. We use multiple mocks to determine the expected errors given one to four passes, compared to an idealised survey observing an equivalent number of randomly selected targets. On BAO scales, we find that the error is a factor 2 worse after one pass, but that after three or more passes, the errors are very similar. Thus we find that the fibre assignment strategy enforced by the design of DESI will not affect the cosmological measurements to be made by the survey, and can be removed as a potential risk for this experiment.

astro-ph.CO↗

arXiv2018

DES Science Portal: Computing Photometric Redshifts

A significant challenge facing photometric surveys for cosmological purposes is the need to produce reliable redshift estimates. The estimation of photometric redshifts (photo-zs) has been consolidated as the standard strategy to bypass the high production costs and incompleteness of spectroscopic redshift samples. Training-based photo-z methods require the preparation of a high-quality list of spectroscopic redshifts, which needs to be constantly updated. The photo-z training, validation, and estimation must be performed in a consistent and reproducible way in order to accomplish the scientific requirements. To meet this purpose, we developed an integrated web-based data interface that not only provides the framework to carry out the above steps in a systematic way, enabling the ease testing and comparison of different algorithms, but also addresses the processing requirements by parallelizing the calculation in a transparent way for the user. This framework called the Science Portal (hereafter Portal) was developed in the context the Dark Energy Survey (DES) to facilitate scientific analysis. In this paper, we show how the Portal can provide a reliable environment to access vast data sets, provide validation algorithms and metrics, even in the case of multiple photo-zs methods. It is possible to maintain the provenance between the steps of a chain of workflows while ensuring reproducibility of the results. We illustrate how the Portal can be used to provide photo-z estimates using the DES first year (Y1A1) data. While the DES collaboration is still developing techniques to obtain more precise photo-zs, having a structured framework like the one presented here is critical for the systematic vetting of DES algorithmic improvements and the consistent production of photo-zs in the future DES releases.

astro-ph.GA↗

arXiv2018

The DESI Instrument Control System: Status and Early Testing

The Dark Energy Spectroscopic Instrument (DESI) is a new instrument currently under construction for the Mayall 4-m telescope at Kitt Peak National Observatory. It will consist of a wide-field optical corrector with a 3.2 degree diameter field of view, a focal plane with 5,000 robotically controlled fiber positioners and 10 fiber-fed broad-band spectrographs. The DESI Instrument Control System (ICS) coordinates fiber positioner operations, interfaces to the Mayall telescope control system, monitors operating conditions, reads out the 30 spectrograph CCDs and provides observer support and data quality monitoring. In this article, we summarize the ICS design, review the current status of the project and present results from a multi-stage test plan that was developed to ensure the system is fully operational by the time the instrument arrives at the observatory in 2019.

astro-ph.IM↗

arXiv2018

DESI Commissioning Instrument Metrology

astro-ph.IM↗

arXiv2018

The Commissioning Instrument for the Dark Energy Spectroscopic Instrument

We describe the design of the Commissioning Instrument for the Dark Energy Spectroscopic Instrument (DESI). DESI will obtain spectra over a 3 degree field of view using the 4-meter Mayall Telescope at Kitt Peak, AZ. In order to achieve the required image quality over this field of view, a new optical corrector is being installed at the Mayall Telescope. The Commissioning Instrument is designed to characterize the image quality of the new optical system. The Commissioning Instrument has five commercial cameras; one at the center of the focal surface and four near the periphery of the field and at the cardinal directions. There are also 22 illuminated fiducials, distributed throughout the focal surface, that will be used to test the system that will map between the DESI fiber positioners and celestial coordinates. We describe how the commissioning instrument will perform commissioning tasks for the DESI project and thereby eliminate risks.

astro-ph.IM↗

arXiv2018

Fabrication of the DESI Corrector Lenses

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. We describe the DESI corrector optics, a series of six fused silica and borosilicate lenses. The lens diameters range from 0.8 to 1.1 meters, and their weights 84 to 237 kg. Most lens surfaces are spherical, and two are challenging 10th-order polynomial aspheres. The lenses have been successfully polished and treated with an antireflection coating at multiple subcontractors, and are now being integrated into the DESI corrector barrel assembly at University College London. We describe the final performance of the lenses in terms of their various parameters, including surface figure, homogeneity, and others, and compare their final performance against the demanding DESI corrector requirements. Also we describe the reoptimization of the lens spacing in their corrector barrel after their final measurements are known. Finally we assess the performance of the corrector as a whole, compared to early budgeted estimates.

astro-ph.IM↗

arXiv2018

Overview of the Dark Energy Spectroscopic Instrument

astro-ph.IM↗

arXiv2018

DES Science Portal: Creating Science-Ready Catalogs

We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs with different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.

astro-ph.IM↗

arXiv2018

Cloud No Longer a Silver Bullet, Edge to the Rescue

This paper takes the position that, while cognitive computing today relies heavily on the cloud, we will soon see a paradigm shift where cognitive computing primarily happens on network edges. The shift toward edge devices is fundamentally propelled both by technological constraints in data centers and wireless network infrastructures, as well as practical considerations such as privacy and safety. The remainder of this paper lays out our view of how these constraints will impact future cognitive computing. Bringing cognitive computing to edge devices opens up several new opportunities and challenges, some of which demand new solutions and some of which require us to revisit entrenched techniques in light of new technologies. We close the paper with a call to action for future research.

cs.NI↗

arXiv2017

Weightless: Lossy Weight Encoding For Deep Neural Network Compression

The large memory requirements of deep neural networks limit their deployment and adoption on many devices. Model compression methods effectively reduce the memory requirements of these models, usually through applying transformations such as weight pruning or quantization. In this paper, we present a novel scheme for lossy weight encoding which complements conventional compression techniques. The encoding is based on the Bloomier filter, a probabilistic data structure that can save space at the cost of introducing random errors. Leveraging the ability of neural networks to tolerate these imperfections and by re-training around the errors, the proposed technique, Weightless, can compress DNN weights by up to 496x with the same model accuracy. This results in up to a 1.51x improvement over the state-of-the-art.

cs.LG↗