arXiv subjects

David Goldhaber-Gordon

Publications and source records attributed to David Goldhaber-Gordon.

At least 37 records · Page 2Linked to original sources

arXiv2023

Visualizing the atomic-scale origin of metallic behavior in Kondo insulators

A Kondo lattice is often electrically insulating at low temperatures. However, several recent experiments have detected signatures of bulk metallicity within this Kondo insulating phase. Here we visualize the real-space charge landscape within a Kondo lattice with atomic resolution using a scanning tunneling microscope. We discover nanometer-scale puddles of metallic conduction electrons centered around uranium-site substitutions in the heavy-fermion compound URu$_2$Si$_2$, and around samarium-site defects in the topological Kondo insulator SmB$_6$. These defects disturb the Kondo screening cloud, leaving behind a fingerprint of the metallic parent state. Our results suggest that the mysterious 3D quantum oscillations measured in SmB$_6$ could arise from these Kondo-lattice defects, although we cannot rule out other explanations. Our imaging technique could enable the development of atomic-scale charge sensors using heavy-fermion probes.

cond-mat.str-el↗

arXiv2023

Probing single-electron scattering through a non-Fermi liquid charge-Kondo device

Among the exotic and yet unobserved features of multi-channel Kondo impurity models is their sub-unitary single electron scattering. In the two-channel Kondo model, for example, an incoming electron is fully scattered into a many-body excitation such that the single particle Green function vanishes. Here we propose to directly observe these features in a charge-Kondo device encapsulated in a Mach-Zehnder interferometer - within a device already studied in Ref.[1]. We provide detailed predictions for the visibility and phase of the Aharonov-Bohm oscillations depending on the number of coupled channels and the asymmetry of their couplings.

cond-mat.str-el↗

arXiv2023

Low-damage electron beam lithography for nanostructures on Bi$_2$Te$_3$-class topological insulator thin films

Nanostructured topological insulators (TIs) have the potential to impact a wide array of condensed matter physics topics, ranging from Majorana physics to spintronics. However, the most common TI materials, the Bi$_2$Se$_3$ family, are easily damaged during nanofabrication of devices. In this paper, we show that electron beam lithography performed with a 30 or 50 kV accelerating voltage -- common for nanopatterning in academic facilities -- damages both nonmagnetic TIs and their magnetically-doped counterparts at unacceptable levels. We additionally demonstrate that electron beam lithography with a 10 kV accelerating voltage produces minimal damage detectable through low-temperature electronic transport. Although reduced accelerating voltages present challenges in creating fine features, we show that with careful choice of processing parameters, particularly the resist, 100 nm features are reliably achievable.

cond-mat.mes-hall↗

arXiv2022

Measured potential profile in a quantum anomalous Hall system suggests bulk-dominated current flow

Ideally, quantum anomalous Hall systems should display zero longitudinal resistance. Yet in experimental quantum anomalous Hall systems elevated temperature can make the longitudinal resistance finite, indicating dissipative flow of electrons. Here, we show that the measured potentials at multiple locations within a device at elevated temperature are well-described by solution of Laplace's equation, assuming spatially-uniform conductivity, suggesting non-equilibrium current flows through the two-dimensional bulk. Extrapolation suggests that at even lower temperatures current may still flow primarily through the bulk rather than, as had been assumed, through edge modes. An argument for bulk current flow previously applied to quantum Hall systems supports this picture.

cond-mat.mes-hall↗

arXiv2022

Unusual magnetotransport in twisted bilayer graphene from strain-induced open Fermi surfaces

Anisotropic hopping in a toy Hofstadter model was recently invoked to explain a rich and surprising Landau spectrum measured in twisted bilayer graphene away from the magic angle. Suspecting that such anisotropy could arise from unintended uniaxial strain, we extend the Bistritzer-MacDonald model to include uniaxial heterostrain. We find that such strain strongly influences band structure, shifting the three otherwise-degenerate van Hove points to different energies. Coupled to a Boltzmann magnetotransport calculation, this reproduces previously-unexplained non-saturating $B^2$ magnetoresistance over broad ranges of density near filling $ν=\pm 2$, and predicts subtler features that had not been noticed in the experimental data. In contrast to these distinctive signatures in longitudinal resistivity, the Hall coefficient is barely influenced by strain, to the extent that it still shows a single sign change on each side of the charge neutrality point -- surprisingly, this sign change no longer occurs at a van Hove point. The theory also predicts a marked rotation of the electrical transport principal axes as a function of filling even for fixed strain and for rigid bands. More careful examination of interaction-induced nematic order versus strain effects in twisted bilayer graphene could thus be in order.

cond-mat.mes-hall↗

arXiv2022

Clean quantum point contacts in an InAs quantum well grown on a lattice-mismatched InP substrate

Strong spin-orbit coupling, the resulting large $g$ factor, and small effective mass make InAs an attractive material platform for inducing topological superconductivity. The surface Fermi level pinning in the conduction band enables highly transparent ohmic contact without excessive doping. We investigate electrostatically defined quantum point contacts (QPCs) in a deep-well InAs two-dimensional electron gas. Despite the 3.3% lattice mismatch between the InAs quantum well and the InP substrate, we report clean QPCs with up to eight pronounced quantized conductance plateaus at zero magnetic field. Source-drain dc bias spectroscopy reveals a harmonic confinement potential with a nearly $5$ meV subband spacing. We find a many-body exchange interaction enhancement for the out-of-plane $g$ factor $|g_{\perp}^*| = 27 \pm 1$, whereas the in-plane $g$ factor is isotropic $|g^*_{x}| = |g^*_{y}| = 12 \pm 2$, close to the bulk value for InAs.

cond-mat.mes-hall↗

arXiv2022

Chromium-Doped Bismuth Antimony Telluride for Future Quantum Hall Resistance Standards

Since 2017, epitaxial graphene has been the base material for the US national standard for resistance. A future avenue of research within electrical metrology is to remove the need for strong magnetic fields, as is currently the case for devices exhibiting the quantum Hall effect. The quantum Hall effect is just one of many research endeavours that revolve around recent quantum physical phenomena like composite fermions, charge density waves, and topological properties [1-2]. New materials, like magnetically doped topological insulators (MTIs), offer access to the quantum anomalous Hall effect, which in its ideal form, could become a future resistance standard needing only a small permanent magnet to activate a quantized resistance value [3-5]. Furthermore, these devices could operate at zero-field for measurements, making the dissemination of the ohm more economical and portable. Here we present results on precision measurements of the h/e2 quantized plateau of Cr-Doped (BixSb1-x)2Te3 and give them context by comparing them to modern graphene-based resistance standards. Ultimately, MTI-based devices could be combined in a single system with magnetic-field-averse Josephson voltage standards to obtain an alternative quantum current standard.

cond-mat.mes-hall↗

arXiv2022

Quantum simulation of an exotic quantum critical point in a two-site charge Kondo circuit

Tuning a material to the cusp between two distinct ground states can produce exotic physical properties, unlike those in either of the neighboring phases. The prospect of designing a model experimental system to capture such behavior is tantalizing. An array of tunnel-coupled quantum dots, each hosting a local spin, should have an appropriately complex phase diagram, but scaling up from individual dots to uniform clusters or lattices has proven difficult: though each site can be tuned to the same occupancy, each has a different set of localized wavefunctions whose couplings to neighboring sites cannot be made fully uniform. An array of metal nanostructures has complementary strengths and weaknesses: simple electrostatic tuning can make each element behave essentially identically, but intersite coupling is not tunable. In this work, we study a tunable nanoelectronic circuit comprising two coupled hybrid metallic-semiconductor islands, combining the strengths of the two types of materials, and demonstrating the potential for scalability. With two charge states of an island acting as an effective spin-1/2, the new architecture also offers a rich range of coupling interactions, and we exploit this to demonstrate a novel quantum critical point. Experimental results in the vicinity of the critical point match striking theoretical predictions.

cond-mat.mes-hall↗

arXiv2022

Feedback Lock-in: A versatile multi-terminal measurement system for electrical transport devices

We present the design and implementation of a measurement system that enables parallel drive and detection of small currents and voltages at numerous electrical contacts to a multi-terminal electrical device. This system, which we term a feedback lock-in, combines digital control-loop feedback with software-defined lock-in measurements to dynamically source currents and measure small, pre-amplified potentials. The effective input impedance of each current/voltage probe can be set via software, permitting any given contact to behave as an open-circuit voltage lead or as a virtually grounded current source/sink. This enables programmatic switching of measurement configurations and permits measurement of currents at multiple drain contacts without the use of current preamplifiers. Our 32-channel implementation relies on commercially available digital input/output boards, home-built voltage preamplifiers, and custom open-source software. With our feedback lock-in, we demonstrate differential measurement sensitivity comparable to a widely used commercially available lock-in amplifier and perform efficient multi-terminal electrical transport measurements on twisted bilayer graphene and $SrTiO_3$ quantum point contacts. The feedback lock-in also enables a new style of current-biased measurement which we demonstrate on a ballistic graphene device.

cond-mat.mes-hall↗

arXiv2021

Ionic liquid gating of SrTiO$_3$ lamellas fabricated with a focused ion beam

In this work, we combine two previously-incompatible techniques for defining electronic devices: shaping three-dimensional crystals by focused ion beam (FIB), and two-dimensional electrostatic accumulation of charge carriers. The principal challenge for this integration is nanometer-scale surface damage inherent to any FIB-based fabrication. We address this by using a sacrificial protective layer to preserve a selected pristine surface. The test case presented here is accumulation of 2D carriers by ionic liquid gating at the surface of a micron-scale SrTiO$_3$ lamella. Preservation of surface quality is reflected in superconductivity of the accumulated carriers. This technique opens new avenues for realizing electrostatic charge tuning in materials that are not available as large or exfoliatable single crystals, and for patterning the geometry of the accumulated carriers.

cond-mat.mtrl-sci↗

arXiv2021

Clean ballistic quantum point contact in SrTiO$_3$

Two dimensional electron gases based on SrTiO$_3$ are an intriguing platform for exploring mesoscopic superconductivity combined with spin-orbit coupling, offering electrostatic tunability from insulator to metal to superconductor within a single material. So far, however, quantum effects in SrTiO$_3$ nanostructures have been complicated by disorder. Here we introduce a facile approach to achieving high mobility and patterning gate-tunable structures in SrTiO$_3$, and use it to demonstrate ballistic constrictions with clean normal state conductance quantization. Conductance plateaus show two-fold degeneracy that persists to magnetic fields of at least 5 T - far beyond what one would expect from the $g$-factor extracted at high fields - a potential signature of electron pairing extending outside the superconducting regime.

cond-mat.mes-hall↗

arXiv2021

Quantum Imaging of Single-Atom Spin-Splitting in a Monolayer Semiconductor

Theoretical work has suggested that monolayer MoS2 doped with Mn should behave as a two-dimensional dilute magnetic semiconductor, which would open up possibilities for spintronic applications, device physics, and novel ground states. The magnetic properties on Mn dopants in MoS2 are dependent on the mid-gap impurity states of said dopants as well as the sites of dopant incorporation and dopant concentration. In this work we use STM/STS to characterize multiple impurity types associated with Mn dopants in MoS2, and use ring features that appear in spectral maps due to tip-induced band bending to investigate the nature of the mid-gap impurity states. The doublet nature of the rings and comparison to DFT calculations show that the Mn states exhibit strong spin splitting which can be quantified. We used scanned MOKE experiments to extend these magnetization measurements from atomic scale to mm scales, and detect the spin susceptibility signal which increases with Mn concentration. These experiments show that single Mn atoms in MoS2 function as active unscreened magnetic moments in the TMD monolayer, and can be harnessed for spin physics applications and science.

cond-mat.mes-hall↗

arXiv2021

Nanoscale electronic transparency of wafer-scale hexagonal boron nitride

Monolayer hBN has attracted interest as a potentially weakly interacting 2D insulating layer in heterostructures. Recently, wafer-scale hBN growth on Cu(111) has been demonstrated for semiconductor chip fabrication processes and transistor action. For all these applications, the perturbation on the underlying electronically active layers is critical. For example, while hBN on Cu(111) has been shown to preserve the Cu(111) surface state 2D electron gas, it was previously unknown how this varies over the sample and how it is affected by local electronic corrugation. Here, we demonstrate that the Cu(111) surface state under wafer-scale hBN is robustly homogeneous in energy and spectral weight over nanometer length scales and over atomic terraces. We contrast this with a benchmark spectral feature associated with interaction between BN atoms and the Cu surface, which varies with the Moiré pattern of the hBN/Cu(111) sample and is dependent on atomic registry. This work demonstrates that fragile 2D electron systems and interface states are largely unperturbed by local variations created by the hBN due to atomic-scale interactions with the substrate, thus providing a remarkably transparent window on low-energy electronic structure below the hBN monolayer.

cond-mat.mtrl-sci↗

arXiv2021

Bulk dissipation in the quantum anomalous Hall effect

Even at the lowest accessible temperatures, measurements of the quantum anomalous Hall (QAH) effect have indicated the presence of parasitic dissipative conduction channels. There is no consensus whether parasitic conduction is related to processes in the bulk or along the edges. Here, we approach this problem by comparing transport measurements of Hall bar and Corbino geometry devices fabricated from Cr-doped (BiSb)$_2$Te$_3$. We identify bulk conduction as the dominant source of dissipation at all values of temperature and in-plane electric field. Furthermore, we observe identical breakdown phenomenology in both geometries, indicating that breakdown of the QAH phase is a bulk process. The methodology developed in this study could be used to identify dissipative conduction mechanisms in new QAH materials, ultimately guiding material development towards realization of the QAH effect at higher temperatures.

cond-mat.mes-hall↗

arXiv2021

Quantized critical supercurrent in SrTiO$_3$-based quantum point contacts

Superconductivity in SrTiO$_3$ occurs at remarkably low carrier densities and therefore, unlike conventional superconductors, can be controlled by electrostatic gates. Here we demonstrate nanoscale weak links connecting superconducting leads, all within a single material, SrTiO$_3$. Ionic liquid gating accumulates carriers in the leads, and local electrostatic gates are tuned to open the weak link. These devices behave as superconducting quantum point contacts with a quantized critical supercurrent. This is a milestone towards establishing SrTiO$_3$ as a single-material platform for mesoscopic superconducting transport experiments, that also intrinsically contains the necessary ingredients to engineer topological superconductivity

cond-mat.mes-hall↗

arXiv2021

Unusual magnetotransport in twisted bilayer graphene

We present transport measurements of bilayer graphene with 1.38° interlayer twist and apparent additional alignment to its hexagonal boron nitride cladding. As with other devices with twist angles substantially larger than the magic angle of 1.1°, we do not observe correlated insulating states or band reorganization. However, we do observe several highly unusual behaviors in magnetotransport. For a large range of densities around half filling of the moiré bands, magnetoresistance is large and quadratic. Over these same densities, the magnetoresistance minima corresponding to gaps between Landau levels split and bend as a function of density and field. We reproduce the same splitting and bending behavior in a simple tight-binding model of Hofstadter's butterfly on a square lattice with anisotropic hopping terms. These features appear to be a generic class of experimental manifestations of Hofstadter's butterfly and may provide insight into the emergent states of twisted bilayer graphene.

cond-mat.mes-hall↗

arXiv2021

Evidence of orbital ferromagnetism in twisted bilayer graphene aligned to hexagonal boron nitride

We have previously reported ferromagnetism evinced by a large hysteretic anomalous Hall effect in twisted bilayer graphene (tBLG). Subsequent measurements of a quantized Hall resistance and small longitudinal resistance confirmed that this magnetic state is a Chern insulator. Here we report that, when tilting the sample in an external magnetic field, the ferromagnetism is highly anisotropic. Because spin-orbit coupling is negligible in graphene such anisotropy is unlikely to come from spin, but rather favors theories in which the ferromagnetism is orbital. We know of no other case in which ferromagnetism has a purely orbital origin. For an applied in-plane field larger than $5\ \mathrm{T}$, the out-of-plane magnetization is destroyed, suggesting a transition to a new phase.

cond-mat.mes-hall↗

arXiv2020

Tunable ferromagnetism at non-integer filling of a moiré superlattice

The flat bands resulting from moiré superlattices in magic-angle twisted bilayer graphene (MATBG) and ABC-trilayer graphene aligned with hexagonal boron nitride (ABC-TLG/hBN) have been shown to give rise to fascinating correlated electron phenomena such as correlated insulators and superconductivity. More recently, orbital magnetism associated with correlated Chern insulators was found in this class of layered structures centered at integer multiples of n0, the density corresponding to one electron per moiré superlattice unit cell. Here we report the experimental observation of ferromagnetism at fractional filling of a flat Chern band in an ABC-TLG/hBN moirésuperlattice. The ferromagnetic state exhibits prominent ferromagnetic hysteresis behavior with large anomalous Hall resistivity in a broad region of densities, centered in the valence miniband at n = -2.3 n0. This ferromagnetism depends very sensitively on the control parameters in the moiré system: not only the magnitude of the anomalous Hall signal, but also the sign of the hysteretic ferromagnetic response can be modulated by tuning the carrier density and displacement field. Our discovery of electrically tunable ferromagnetism in a moiré Chern band at non-integer filling highlights the opportunities for exploring new correlated ferromagnetic states in moiré heterostructures.

cond-mat.mes-hall↗