arXiv subjects

David H. Cobden

Publications and source records attributed to David H. Cobden.

At least 37 records · Page 2Linked to original sources

arXiv2018

Voltage Control of a van der Waals Spin-Filter Magnetic Tunnel Junction

Atomically thin chromium triiodide (CrI3) has recently been identified as a layered antiferromagnetic insulator, in which adjacent ferromagnetic monolayers are antiferromagnetically coupled. This unusual magnetic structure naturally comprises a series of anti-aligned spin filters which can be utilized to make spin-filter magnetic tunnel junctions with very large tunneling magnetoresistance (TMR). Here we report voltage control of TMR formed by four-layer CrI3 sandwiched by monolayer graphene contacts in a dual-gated structure. By varying the gate voltages at fixed magnetic field, the device can be switched reversibly between bistable magnetic states with the same net magnetization but drastically different resistance (by a factor of ten or more). In addition, without switching the state, the TMR can be continuously modulated between 17,000% and 57,000%, due to the combination of spin-dependent tunnel barrier with changing carrier distributions in the graphene contacts. Our work demonstrates new kinds of magnetically moderated transistor action and opens up possibilities for voltage-controlled van der Waals spintronic devices.

cond-mat.mes-hall↗

arXiv2018

Electrical Control of 2D Magnetism in Bilayer CrI3

The challenge of controlling magnetism using electric fields raises fundamental questions and addresses technological needs such as low-dissipation magnetic memory. The recently reported two-dimensional (2D) magnets provide a new system for studying this problem owing to their unique magnetic properties. For instance, bilayer chromium triiodide (CrI3) behaves as a layered antiferromagnet with a magnetic field-driven metamagnetic transition. Here, we demonstrate electrostatic gate control of magnetism in CrI3 bilayers, probed by magneto-optical Kerr effect (MOKE) microscopy. At fixed magnetic fields near the metamagnetic transition, we realize voltage-controlled switching between antiferromagnetic and ferromagnetic states. At zero magnetic field, we demonstrate a time-reversal pair of layered antiferromagnetic states which exhibit spin-layer locking, leading to a remarkable linear dependence of their MOKE signals on gate voltage with opposite slopes. Our results pave the way for exploring new magnetoelectric phenomena and van der Waals spintronics based on 2D materials.

cond-mat.mes-hall↗

arXiv2018

Giant Tunneling Magnetoresistance in Spin-Filter van der Waals Heterostructures

Magnetic multilayer devices that exploit magnetoresistance are the backbone of magnetic sensing and data storage technologies. Here we report novel multiple-spin-filter magnetic tunnel junctions (sf-MTJs) based on van der Waals (vdW) heterostructures in which atomically thin chromium triiodide (CrI3) acts as a spin-filter tunnel barrier sandwiched between graphene contacts. We demonstrate tunneling magnetoresistance which is drastically enhanced with increasing CrI3 layer thickness, reaching a record 19,000% for magnetic multilayer structures using four-layer sf-MTJs at low temperatures. These devices also show multiple resistance states as a function of magnetic field, suggesting the potential for multi-bit functionalities using an individual vdW sf-MTJ. Using magnetic circular dichroism measurements, we attribute these effects to the intrinsic layer-by-layer antiferromagnetic ordering of the atomically thin CrI3. Our work reveals the possibility to push magnetic information storage to the atomically thin limit, and highlights CrI3 as a superlative magnetic tunnel barrier for vdW heterostructure spintronic devices.

cond-mat.mes-hall↗

arXiv2017

Ligand-field helical luminescence in a 2D ferromagnetic insulator

Bulk chromium triiodide (CrI$_3$) has long been known as a layered van der Waals ferromagnet. However, its monolayer form was only recently isolated and confirmed to be a truly two-dimensional (2D) ferromagnet, providing a new platform for investigating light-matter interactions and magneto-optical phenomena in the atomically thin limit. Here, we report spontaneous circularly polarized photoluminescence in monolayer CrI$_3$ under linearly polarized excitation, with helicity determined by the monolayer magnetization direction. In contrast, the bilayer CrI$_3$ photoluminescence exhibits vanishing circular polarization, supporting the recently uncovered anomalous antiferromagnetic interlayer coupling in CrI$_3$ bilayers. Distinct from the Wannier-Mott excitons that dominate the optical response in well-known 2D van der Waals semiconductors, our absorption and layer-dependent photoluminescence measurements reveal the importance of ligand-field and charge-transfer transitions to the optoelectronic response of atomically thin CrI$_3$. We attribute the photoluminescence to a parity-forbidden d-d transition characteristic of Cr$^{3+}$ complexes, which displays broad linewidth due to strong vibronic coupling and thickness-independent peak energy due to its localized molecular orbital nature.

cond-mat.mes-hall↗

arXiv2017

Layer-dependent Ferromagnetism in a van der Waals Crystal down to the Monolayer Limit

Since the celebrated discovery of graphene, the family of two-dimensional (2D) materials has grown to encompass a broad range of electronic properties. Recent additions include spin-valley coupled semiconductors, Ising superconductors that can be tuned into a quantum metal, possible Mott insulators with tunable charge-density waves, and topological semi-metals with edge transport. Despite this progress, there is still no 2D crystal with intrinsic magnetism, which would be useful for many technologies such as sensing, information, and data storage. Theoretically, magnetic order is prohibited in the 2D isotropic Heisenberg model at finite temperatures by the Mermin-Wagner theorem. However, magnetic anisotropy removes this restriction and enables, for instance, the occurrence of 2D Ising ferromagnetism. Here, we use magneto-optical Kerr effect (MOKE) microscopy to demonstrate that monolayer chromium triiodide (CrI3) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 K is only slightly lower than the 61 K of the bulk crystal, consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phase transition, showcasing the hallmark thickness-dependent physical properties typical of van der Waals crystals. Remarkably, bilayer CrI3 displays suppressed magnetization with a metamagnetic effect, while in trilayer the interlayer ferromagnetism observed in the bulk crystal is restored. Our work creates opportunities for studying magnetism by harnessing the unique features of atomically-thin materials, such as electrical control for realizing magnetoelectronics, and van der Waals engineering for novel interface phenomena.

cond-mat.mes-hall↗

arXiv2016

Edge conduction in monolayer WTe2

A two-dimensional topological insulator (2DTI) is guaranteed to have a helical 1D edge mode in which spin is locked to momentum, producing the quantum spin Hall effect and prohibiting elastic backscattering at zero magnetic field. No monolayer material has yet been shown to be a 2DTI, but recently the Weyl semimetal WTe2 was predicted to become a 2DTI in monolayer form if a bulk gap opens. Here, we report that at temperatures below about 100 K monolayer WTe2 does become insulating in its interior, while the edges still conduct. The edge conduction is strongly suppressed by in-plane magnetic field and is independent of gate voltage, save for mesoscopic fluctuations that grow on cooling due to a zero-bias anomaly which reduces the linear-response conductance. Bilayer WTe2 also becomes insulating at low temperatures but does not show edge conduction. Many of these observations are consistent with monolayer WTe2 being a 2DTI. However, the low temperature edge conductance, for contacts spacings down to 150 nm, is below the quantized value,

cond-mat.mes-hall↗

arXiv2016

Visualization of one-dimensional diffusion and spontaneous segregation of hydrogen in single crystals of VO2

Hydrogen intercalation in solids is common, complicated, and very difficult to monitor. In a new approach to the problem, we have studied the profile of hydrogen diffusion in single-crystal nanobeams and plates of VO2, exploiting the fact that hydrogen doping in this material leads to visible darkening near room temperature connected with the metal-insulator transition at 65 °C. We observe hydrogen diffusion along the rutile c-axis but not perpendicular to it, making this a highly one-dimensional diffusion system. We obtain an activated diffusion coefficient, ~0.01 e^(-0.6 eV/k_B T) cm2sec-1, applicable in metallic phase. In addition, we observe dramatic supercooling of the hydrogen-induced metallic phase and spontaneous segregation of the hydrogen into stripes implying that the diffusion process is highly nonlinear, even in the absence of defects. Similar complications may occur in hydrogen motion in other materials but are not revealed by conventional measurement techniques.

cond-mat.str-el↗

arXiv2016

Band parameters and hybridization in 2D semiconductor heterostructures from photoemission spectroscopy

Combining monolayers of different two-dimensional (2D) semiconductors into heterostructures opens up a wealth of possibilities for novel electronic and optical functionalities. Exploiting them hinges on accurate measurements of the band parameters and orbital hybridization in separate and stacked monolayers, many of which are only available as small samples. The recently introduced technique of angle-resolved photoemission spectroscopy with submicron spatial resolution (μ-ARPES) offers the capability to measure small samples, but the energy resolution obtained for such exfoliated samples to date (~0.5 eV) has been inadequate. Here, we show that by suitable heterostructure sample design the full potential of μ-ARPES can be realized. We focus on MoSe2/WSe2 van der Waals heterostructures, which are 2D analogs of 3D semiconductor heterostructures. We find that in a MoSe2/WSe2 heterobilayer the bands in the K valleys are weakly hybridized, with the conduction and valence band edges originating in the MoSe2 and WSe2 respectively. There is stronger hybridization at the Γ point, but the valence band edge remains at the K points. This is consistent with the recent observation of interlayer excitons where the electron and hole are valley polarized but in opposite layers. We determine the valence band offset to be 300 meV, which combined with photoluminescence measurements implies that the binding energy of interlayer excitons is at least 200 meV, comparable with that of intralayer excitons.

cond-mat.mes-hall↗

arXiv2015

Photo-Nernst current in graphene

Photocurrent measurements provide a powerful means of studying the spatially resolved optoelectronic and electrical properties of a material or device. Generally speaking there are two classes of mechanism for photocurrent generation: those involving separation of electrons and holes, and thermoelectric effects driven by electron temperature gradients. Here we introduce a new member in the latter class: the photo-Nernst effect. In graphene devices in a perpendicular magnetic field we observe photocurrent generated uniformly along the free edges, with opposite sign at opposite edges. The signal is antisymmetric in field, shows a peak versus gate voltage at the neutrality point flanked by wings of opposite sign at low fields, and exhibits quantum oscillations at higher fields. These features are all explained by the Nernst effect associated with laser-induced electron heating. This photo-Nernst current provides a simple and clear demonstration of the Shockley-Ramo nature of long-range photocurrent generation in a gapless material.

cond-mat.mes-hall↗

arXiv2015

Surface electron perturbations and the collective behavior of atoms adsorbed on a cylinder

A single-walled carbon nanotube presents a seamless cylindrical graphene surface and is thus an ideal adsorption substrate for investigating the physics of atoms and molecules in two dimensions and approaching the one-dimensional limit. When a suspended nanotube is made into a transistor, frequency shifts of its mechanical resonances allow precise measurement of the adsorbed mass down to the single-atom level. Here we show that its electrical characteristics are also modified by the adsorbed atoms and molecules, partly as a result of a small charge transfer between them and the carbon surface. We quantify this charge transfer, finding it similar for many different species, and use the associated sensitivity of the conductance to carry out studies of phase transitions, critical scaling, dynamical fluctuations, and dissipative metastable states in a system of interacting atoms confined to a cylindrical geometry.

cond-mat.mes-hall↗

arXiv2014

Lateral heterojunctions within monolayer semiconductors

Heterojunctions between three-dimensional (3D) semiconductors with different bandgaps are the basis of modern light-emitting diodes, diode lasers, and high-speed transistors. Creating analogous heterojunctions between different two-dimensional (2D) semiconductors would enable band engineering within the 2D plane and open up new realms in materials science, device physics and engineering. Here we demonstrate that seamless high-quality in-plane heterojunctions can be grown between the 2D monolayer semiconductors MoSe2 and WSe2. The junctions, grown by lateral hetero-epitaxy using physical vapor transport, are visible in an optical microscope and show enhanced photoluminescence. Atomically resolved transmission electron microscopy reveals that their structure is an undistorted honeycomb lattice in which substitution of one transition metal by another occurs across the interface. The growth of such lateral junctions will allow new device functionalities, such as in-plane transistors and diodes, to be integrated within a single atomically thin layer.

cond-mat.mes-hall↗

arXiv2013

Measurement of a solid-state triple point at the metal-insulator transition in VO2

First-order phase transitions in solids are notoriously challenging to study. The combination of change in unit cell shape, long range of elastic distortion, and flow of latent heat leads to large energy barriers resulting in domain structure, hysteresis, and cracking. The situation is still worse near a triple point where more than two phases are involved. The famous metal-insulator transition (MIT) in vanadium dioxide, a popular candidate for ultrafast optical and electrical switching applications, is a case in point. Even though VO2 is one of the simplest strongly correlated materials, experimental difficulties posed by the first-order nature of the MIT as well as the involvement of at least two competing insulating phases have led to persistent controversy about its nature. Here, we show that studying single-crystal VO2 nanobeams in a purpose-built nanomechanical strain apparatus allows investigation of this prototypical phase transition with unprecedented control and precision. Our results include the striking finding that the triple point of the metallic and two insulating phases is at the transition temperature, T_tr = T_c, which we determine to be 65.0 +- 0.1 C. The findings have profound implications for the mechanism of the MIT in VO2, but in addition they demonstrate the importance of such an approach for mastering phase transitions in many other strongly correlated materials, such as manganites and iron-based superconductors.

cond-mat.str-el↗

arXiv2012

Photoresponse of a strongly correlated material determined by scanning photocurrent microscopy

The generation of a current by light is a key process in optoelectronic and photovoltaic devices. In band semiconductors, depletion fields associated with interfaces separate long-lived photo-induced carriers. However, in systems with strong electron-electron and electron-phonon correlations it is unclear what physics will dominate the photoresponse. Here we investigate photocurrent in a vanadium dioxide, an exemplary strongly correlated material known for its dramatic metal-insulator transition (MIT) at Tc = 68 C which could be useful for optoelectronic detection and switching up to ultraviolet wavelengths. Using scanning photocurrent microscopy (SPCM) on individual suspended VO2 nanobeams we observe photoresponse peaked at the metal-insulator boundary but extended throughout both insulating and metallic phases. We determine that the response is photo-thermal, implying efficient carrier relaxation to a local equilibrium in a manner consistent with strong correlations. Temperature dependent measurements reveal subtle phase changes within the insulating state. We further demonstrate switching of the photocurrent by optical control of the metal-insulator boundary arrangement. Our work shows the value of SPCM applied to nanoscale crystals for investigating strongly correlated materials, and the results are relevant for designing and controlling optoelectronic devices employing such materials.

cond-mat.str-el↗

arXiv2009

Phase transitions on the surface of a carbon nanotube

A suspended carbon nanotube can act as a nanoscale resonator with remarkable electromechanical properties and the ability to detect adsorption on its surface at the level of single atoms. Understanding adsorption on nanotubes and other graphitic materials is key to many sensing and storage applications. Here we show that nanotube resonators offer a powerful new means of investigating fundamental aspects of adsorption on carbon, including the collective behaviour of adsorbed matter and its coupling to the substrate electrons. By monitoring the vibrational resonance frequency in the presence of noble gases, we observe the formation of monolayers on the cylindrical surface and phase transitions within these monolayers, and simultaneous modification of the electrical conductance. The monolayer observations also demonstrate the possibility of studying the fundamental behaviour of matter in cylindrical geometry.

cond-mat.mes-hall↗

arXiv2009

Metal-insulator transition in vanadium dioxide nanobeams: probing sub-domain properties of strongly correlated materials

Many strongly correlated electronic materials, including high-temperature superconductors, colossal magnetoresistance and metal-insulator-transition (MIT) materials, are inhomogeneous on a microscopic scale as a result of domain structure or compositional variations. An important potential advantage of nanoscale samples is that they exhibit the homogeneous properties, which can differ greatly from those of the bulk. We demonstrate this principle using vanadium dioxide, which has domain structure associated with its dramatic MIT at 68 degrees C. Our studies of single-domain vanadium dioxide nanobeams reveal new aspects of this famous MIT, including supercooling of the metallic phase by 50 degrees C; an activation energy in the insulating phase consistent with the optical gap; and a connection between the transition and the equilibrium carrier density in the insulating phase. Our devices also provide a nanomechanical method of determining the transition temperature, enable measurements on individual metal-insulator interphase walls, and allow general investigations of a phase transition in quasi-one-dimensional geometry.

cond-mat.mes-hall↗

arXiv2001

Shell filling in closed single-wall carbon nanotube quantum dots

We observe two-fold shell filling in the spectra of closed one-dimensional quantum dots formed in single-wall carbon nanotubes. Its signatures include a bimodal distribution of addition energies, correlations in the excitation spectra for different electron number, and alternation of the spins of the added electrons. This provides a contrast with quantum dots in higher dimensions, where such spin pairing is absent. We also see indications of an additional fourfold periodicity indicative of K-K' subband shells. Our results suggest that the absence of shell filling in most isolated nanotube dots results from disorder or nonuniformity.

cond-mat.mes-hall↗

arXiv2001

Quantum dots in suspended single-wall carbon nanotubes

We present a simple technique which uses a self-aligned oxide etch to suspend individual single-wall carbon nanotubes between metallic electrodes. This enables one to compare the properties of a particular nanotube before and after suspension, as well as to study transport in suspended tubes. As an example of the utility of the technique, we study quantum dots in suspended tubes, finding that their capacitances are reduced owing to the removal of the dielectric substrate.

cond-mat.mes-hall↗

arXiv2001

Transport phenomena in nanotube quantum dots from strong to weak confinement

We report low-temperature transport experiments on single-wall nanotubes with metallic leads of varying contact quality, ranging from weak tunneling to almost perfect transmission. In the weak tunneling regime, where Coulomb blockade dominates, the nanotubes act as one-dimensional quantum dots. For stronger coupling to the leads the conductance can be strongly enhanced by inelastic cotunneling and the Kondo effect. For open contacts Coulomb blockade is completely suppressed, and the low-temperature conductance remains generally high, although we often see distinct dips in the conductance versus gate voltage which may result from resonant backscattering.

cond-mat.mes-hall↗