Searcharxiv⌕ Search

arXiv subjects

David J. Moss

Publications and source records attributed to David J. Moss.

At least 109 records · Page 6Linked to original sources
arXiv2018

Emerging applications of integrated optical microcombs for analogue RF and microwave photonic signal processing

We review new applications of integrated microcombs in RF and microwave photonic systems. We demonstrate a wide range of powerful functions including a photonic intensity high order and fractional differentiators, optical true time delays, advanced filters, RF channelizer and other functions, based on a Kerr optical comb generated by a compact integrated microring resonator, or microcomb. The microcomb is CMOS compatible and contains a large number of comb lines, which can serve as a high performance multiwavelength source for the transversal filter, thus greatly reduce the cost, size, and complexity of the system. The operation principle of these functions is theoretically analyzed, and experimental demonstrations are presented.

physics.app-ph↗
arXiv2018

Optical wavelength conversion of high bandwidth phase-encoded signals in a high FOM 50cm CMOS compatible waveguide

We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this is a promising platform for nonlinear optical signal processing, a result of both very low linear propagation loss (less than 0.07 dB/cm) and the large material bandgap that ensures negligible nonlinear loss at telecom wavelengths.

physics.app-ph↗
arXiv2018

Photonic single sideband RF generator based on an integrated optical micro-ring resonator

We demonstrate narrowband orthogonally polarized optical RF single sideband generation as well as dual-channel equalization based on an integrated dual-polarization-mode high-Q microring resonator. The device operates in the optical communications band and enables narrowband RF operation at either 16.6 GHz or 32.2 GHz, determined by the free spectral range and TE/TM mode interval in the resonator. We achieve a very large dynamic tuning range of over 55 dB for both the optical carrier-to-sideband ratio and the dual-channel RF equalization.

eess.SP↗
arXiv2018

Silicon photonic filters based on cascaded Sagnac loop resonators

We demonstrate advanced integrated photonic filters in silicon-on-insulator (SOI) nanowires implemented by cascaded Sagnac loop reflector (CSLR) resonators. We investigate mode splitting in these standing-wave (SW) resonators and demonstrate its use for engineering the spectral profile of on-chip photonic filters. By changing the reflectivity of the Sagnac loop reflectors (SLRs) and the phase shifts along the connecting waveguides, we tailor mode splitting in the CSLR resonators to achieve a wide range of filter shapes for diverse applications including enhanced light trapping, flat-top filtering, Q factor enhancement, and signal reshaping. We present the theoretical designs and compare the CSLR resonators with three, four, and eight SLRs fabricated in SOI. We achieve versatile filter shapes in the measured transmission spectra via diverse mode splitting that agree well with theory. This work confirms the effectiveness of using CSLR resonators as integrated multi-functional SW filters for flexible spectral engineering.

physics.app-ph↗
arXiv2018

A Radio Frequency Channelizer based on Cascaded Integrated Micro-ring Resonator Optical Comb Sources and Filters

We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance up to 19 GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.

physics.app-ph↗
arXiv2018

Harnessing optical micro-combs for microwave photonics

In the past decade, optical frequency combs generated by high-Q micro-resonators, or micro-combs, which feature compact device footprints, high energy efficiency, and high-repetition-rates in broad optical bandwidths, have led to a revolution in a wide range of fields including metrology, mode-locked lasers, telecommunications, RF photonics, spectroscopy, sensing, and quantum optics. Among these, an application that has attracted great interest is the use of micro-combs for RF photonics, where they offer enhanced functionalities as well as reduced size and power consumption over other approaches. This article reviews the recent advances in this emerging field. We provide an overview of the main achievements that have been obtained to date, and highlight the strong potential of micro-combs for RF photonics applications. We also discuss some of the open challenges and limitations that need to be met for practical applications.

physics.optics↗
arXiv2018

Photonic RF and microwave reconfigurable filters and true time delays based on an integrated optical Kerr frequency comb source

We demonstrate advanced transversal radio frequency (RF) and microwave functions based on a Kerr optical comb source generated by an integrated micro-ring resonator. We achieve extremely high performance for an optical true time delay aimed at tunable phased array antenna applications, as well as reconfigurable microwave photonic filters. Our results agree well with theory. We show that our true time delay would yield a phased array antenna with features that include high angular resolution and a wide range of beam steering angles, while the microwave photonic filters feature high Q factors, wideband tunability, and highly reconfigurable filtering shapes. These results show that our approach is a competitive solution to implementing reconfigurable, high performance and potentially low cost RF and microwave

physics.app-ph↗
arXiv2017

An optical micro-comb with a 50GHz free spectral range for photonic microwave true time delays

We demonstrate significantly improved performance of a microwave true time delay line (TTDL) based on an integrated micro-ring resonator (MRR) Kerr optical comb source with a channel spacing of 49GHz, corresponding to 81 channels over the C-band. The broadband microcomb, with a record low free spectral range of 49GHz, results in a large number of comb lines for the TTDL, greatly reducing the size, cost, and complexity of the system. The large channel count results in a high angular resolution and wide beam steering tunable range of the phased array antenna (PAA). The enhancement of PAA performance matches well with theory, corroborating the feasibility of our approach as a competitive solution towards implementing compact low-cost TTDL in radar and communications systems.

physics.app-ph↗
arXiv2017

Towards On-Chip Integrated Optical Quantum Frequency Combs

Recent development in quantum photonics allowed to start the process of bringing photonic-quantum-based systems out of the lab into real world applications. As an example, devices for the exchange of a cryptographic key secured by the law of quantum mechanics are currently commercially available. In order to further boost this process, the next step is to migrate the results achieved by means of bulky and expensive setups to miniaturized and affordable devices. Integrated quantum photonics is exactly addressing this issue. In this paper we briefly review the most recent advancements in the generation of quantum states of light (at the core of quantum cryptography and computing) on chip. In particular, we focus on optical microcavities, as they can offer a solution to the issue of low efficiency (low number of photons generated) typical of the materials mostly used in integrated platforms. In addition, we show that specifically designed microcavities can also offer further advantages, such as compatibility with existing telecom standard (thus allowing to exploit the existing fiber network) and quantum memories (necessary in turns to extend the communication distance), as well as longitudinal multimode character. This last property (i.e. the increased dimensionality necessary for describing the quantum state of a photon) is achieved thanks to the generating multiple photon pairs on a frequency comb corresponding to the microcavity resonances. Further achievements include the possibility to fully exploit the polarization degree of freedom also for integrated devices. These results pave the way to the generation of integrated quantum frequency combs, that in turn may find application as quantum computing platform.

physics.optics↗
arXiv2017

Photonic radio frequency and microwave intensity differentiator based on an optical frequency comb source in an integrated micro-ring resonator

We propose and experimentally demonstrate a microwave photonic intensity differentiator based on a Kerr optical comb generated by a compact integrated micro-ring resonator (MRR). The on-chip Kerr optical comb, containing a large number of comb lines, serves as a high-performance multi-wavelength source for implementing a transversal filter, which will greatly reduce the cost, size, and complexity of the system. Moreover, owing to the compactness of the integrated MRR, frequency spacings of up to 200-GHz can be achieved, enabling a potential operation bandwidth of over 100 GHz. By programming and shaping individual comb lines according to calculated tap weights, a reconfigurable intensity differentiator with variable differentiation orders can be realized. The operation principle is theoretically analyzed, and experimental demonstrations of first-, second-, and third-order differentiation functions based on this principle are presented. The radio frequency (RF) amplitude and phase responses of multi-order intensity differentiations are characterized, and system demonstrations of real-time differentiations for a Gaussian input signal are also performed. The experimental results show good agreement with theory, confirming the effectiveness of our approach.

physics.app-ph↗
arXiv2017

Chip-based photon quantum state sources using nonlinear optics

The ability to generate complex optical photon states involving entanglement between multiple optical modes is not only critical to advancing our understanding of quantum mechanics but will play a key role in generating many applications in quantum technologies. These include quantum communications, computation, imaging, microscopy and many other novel technologies that are constantly being proposed. However, approaches to generating parallel multiple, customisable bi- and multi-entangled quantum bits (qubits) on a chip are still in the early stages of development. Here, we review recent developments in the realisation of integrated sources of photonic quantum states, focusing on approaches based on nonlinear optics that are compatible with contemporary optical fibre telecommunications and quantum memory infrastructures as well as with chip-scale semiconductor technology. These new and exciting platforms hold the promise of compact, low-cost, scalable and practical implementations of sources for the generation and manipulation of complex quantum optical states on a chip, which will play a major role in bringing quantum technologies out of the laboratory and into the real world.

physics.optics↗
arXiv2017

Integrated Fabry-Perot cavities as a mechanism for enhancing micro-ring resonator performance

We propose and experimentally demonstrate the enhancement in the filtering quality (Q) factor of an integrated micro-ring resonator (MRR) by embedding it in an integrated Fabry-Perot (FP) cavity formed by cascaded Sagnac loop reflectors (SLRs). By utilizing coherent interference within the FP cavity to reshape the transmission spectrum of the MRR, both the Q factor and the extinction ratio (ER) can be significantly improved. The device is theoretically analyzed, and practically fabricated on a silicon-on-insulator (SOI) wafer. Experimental results show that up to 11-times improvement in Q factor, together with an 8-dB increase in ER, can be achieved via our proposed method. The impact of varying structural parameters on the device performance is also investigated and verified by the measured spectra of the fabricated devices with different structural parameters.

physics.optics↗
arXiv2017

First and second order all-optical integrating functions in a photonic integrated circuit

We demonstrate all-optical temporal integration of arbitrary optical waveforms with temporal features as short as ~1.9ps. By using a four-port micro-ring resonator based on CMOS compatible doped glass technology we perform the 1st- and 2nd-order cumulative time integral of optical signals over a bandwidth that exceeds 400GHz. This device has applications for a wide range of ultra-fast data processing and pulse shaping functions as well as in the field of optical computing for the real-time analysis of differential equations.

physics.optics↗
arXiv2017

Measurement of ultrashort optical pulses via time lens imaging in CMOS compatible waveguides

We demonstrate temporal measurements of subpicosecond optical pulses via time-to-frequency conversion in a 45cm long CMOS compatible high index glass spiral waveguide. The measurements are based on efficient four wave mixing in the C-band, using around 1W of peak pump power. We achieve a resolution of 400fs over a time window of 100ps, representing a time-bandwidth product > 250.

physics.optics↗
arXiv2015

Microwave and RF Applications for Micro-resonator based Frequency Combs

Photonic integrated circuits that exploit nonlinear optics in order to generate and process signals all-optically have achieved performance far superior to that possible electronically - particularly with respect to speed. We review the recent achievements based in new CMOS-compatible platforms that are better suited than SOI for nonlinear optics, focusing on radio frequency (RF) and microwave based applications that exploit micro-resonator based frequency combs. We highlight their potential as well as the challenges to achieving practical solutions for many key applications. These material systems have opened up many new capabilities such as on-chip optical frequency comb generation and ultrafast optical pulse generation and measurement. We review recent work on a photonic RF Hilbert transformer for broadband microwave in-phase and quadrature-phase generation based on an integrated frequency optical comb. The comb is generated using a nonlinear microring resonator based on a CMOS compatible, high-index contrast, doped-silica glass platform. The high quality and large frequency spacing of the comb enables filters with up to 20 taps, allowing us to demonstrate a quadrature filter with more than a 5-octave (3 dB) bandwidth and an almost uniform phase response.

physics.optics↗