arXiv subjects

David J. Ottaway

Publications and source records attributed to David J. Ottaway.

14 recordsLinked to original sources

arXiv2026

A robust laser cavity platform for NV-diamond singlet infrared absorption magnetometry

The negatively charged nitrogen-vacancy center (NV$^-$) in diamond is a versatile platform for quantum magnetometry under ambient conditions. Recently, laser threshold magnetometry (LTM) has been proposed as a means to significantly enhance the sensitivity of NV-based magnetometers by incorporating a diamond hosting NV$^-$ centers within a laser cavity and operating near threshold. While demonstrations have validated the concept, practical implementations remain technically demanding, requiring high pump powers and precise alignment of free-space cavities. It remains unclear whether the benefits of operating near threshold will outpace increased laser noise. In this work, we integrate an NV-diamond with a high NV$^-$ content into a compact external cavity diode laser and demonstrate singlet infrared absorption optically detected magnetic resonance (ODMR). The system exhibits exceptional threshold current stability, enabling ODMR using the threshold current as the read-out parameter. We report a five-fold enhancement in the ODMR contrast by operating near threshold. The best magnetic field sensitivity of $7.6~\mathrm{nT/\sqrt{Hz}}$ (DC-500 Hz) is achieved well above threshold, while near threshold sensitivity is limited by increased probe laser noise. These results establish a compact and mechanically robust platform for singlet absorption-based NV$^-$ magnetometry and highlight key trade-offs between contrast enhancement and laser noise near threshold.

quant-ph↗

arXiv2024

Understanding the temperature conditions for controlled splicing between silica and fluoride fibers

This study explores the efficacy of thermal splicing conditions between silica and zirconium-fluoride fibers, focusing on achieving mechanical strength between the two fibers. A comprehensive characterization of the thermal profile in the hot zone of the filament splicer was conducted using a fiber Bragg grating, providing valuable insights into its stability and overall performance. Results demonstrate mechanically strong joints and suggest a very narrow temperature window to achieve strong connection between the two materials. Moreover, we characterize the surface composition of the ZrF4 fiber using energy dispersive spectroscopy following splicing at ideal temperatures, as well as at higher and lower temperatures. This work paves the way towards future implementation of silica and fluoride fibers splicing using alternative splicing solutions such as CO2 laser system while raising interesting facts for further studies in the specific field.

physics.optics↗

arXiv2023

Mitigating stimulated Brillouin scattering in multimode fibers with focused output via wavefront shaping

The key challenge for high-power delivery through optical fibers is overcoming nonlinear optical effects. To keep a smooth output beam, most techniques for mitigating optical nonlinearities are restricted to single-mode fibers. Moving out of the single-mode paradigm, we show experimentally that wavefront-shaping of coherent input light that is incident on a highly multimode fiber can increase the power threshold for stimulated Brillouin scattering (SBS) by an order of magnitude, whilst simultaneously controlling the output beam profile. The theory reveals that the suppression of SBS is due to the relative weakness of intermodal scattering compared to intramodal scattering, and to an effective broadening of the Brillouin spectrum under multimode excitation. Our method is efficient, robust, and applicable to continuous waves and pulses. This work points toward a promising route for suppressing detrimental nonlinear effects in optical fibers, which will enable further power scaling of high-power fiber systems for applications to directed energy, remote sensing, and gravitational-wave detection.

physics.optics↗

arXiv2021

Modeling circulating cavity fields using the discrete linear canonical transform

Fabry-Perot cavities are central to many optical measurement systems. In high precision experiments, such as aLIGO and AdV, coupled cavities are often required leading to complex optical dynamics, particularly when optical imperfections are considered. We show, for the first time, that discrete LCTs can be used to compute circulating optical fields for cavities in which the optics have arbitrary apertures, reflectance and transmittance profiles, and shape. We compare the predictions of LCT models with those of alternative methods. To further highlight the utility of the LCT, we present a case study of point absorbers on the aLIGO mirrors and compare with recently published results.

physics.optics↗

arXiv2021

Modal decomposition of complex optical fields using convolutional neural networks

Recent studies have shown convolutional neural networks (CNNs) can be trained to perform modal decomposition using intensity images of optical fields. A fundamental limitation of these techniques is that the modal phases can not be uniquely calculated using a single intensity image. The knowledge of modal phases is crucial for wavefront sensing, alignment and mode matching applications. Heterodyne imaging techniques can provide images of the transverse complex amplitude & phase profile of laser beams at high resolutions and frame rates. In this work we train a CNN to perform modal decomposition using simulated heterodyne images, allowing the complete modal phases to be predicted. This is to our knowledge the first machine learning decomposition scheme to utilize complex phase information to perform modal decomposition. We compare our network with a traditional overlap integral & center-of-mass centering algorithm and show that it is both less sensitive to beam centering and on average more accurate.

physics.optics↗

arXiv2021

Ultrafast 3.5 μm fiber laser

We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 μm. The laser uses dual-wavelength pumping and non-linear polarisation rotation to produce 3.5 μm wavelength pulses with minimum duration of 580 fs at a repetition rate of 68 MHz. The pulse energy is 3.2 nJ, corresponding to a peak power of 5.5 kW.

physics.optics↗

arXiv2020

In-fiber measurement of erbium-doped ZBLAN 4I13/2 state energy transfer parameter

Erbium-doped ZBLAN is the most commonly used glass for mid-infrared fiber lasers. In this paper we quantify the energy dynamics of the erbium ions which is important for improving the performance of mid infrared fiber lasers. Previous studies have found a discrepancy between the strength of inter-ion energy transfer measured in bulk Er:ZBLAN and the strength required to explain current fiber laser performance. We have measured the energy transfer of the 4I13/2 + 4I13/2 -> 4I15/2 + 4I9/2 energy transfer process directly in a range of fibers for the first time.

physics.optics↗

arXiv2020

Mode matching error signals using radio-frequency beam shape modulation

Precise mode matching is needed to maximize performance in coupled cavity interferometers such as Advanced LIGO. In this paper we present a new mode matching sensing scheme that uses a single radio frequency higher order mode sideband and single element photodiodes. It is first order insensitive to misalignment and can serve as an error signal in a closed loop control system for a set of mode matching actuators. We also discuss how it may be implemented in Advanced LIGO. The proposed mode matching error signal has been successfully demonstrated on a tabletop experiment, where the error signal increased the mode matching of a beam to a cavity to 99.9%.

physics.optics↗

arXiv2019

Mode-locked and tunable fiber laser at the 3.5 $μ$m band using frequency-shifted feedback

We report on a mid-infrared mode-locked fiber laser that uses an acousto-optic tunable filter to achieve frequency-shifted feedback pulse generation with frequency tuning over a 215 nm range. The laser operates on the 3.5 $μ$m transition in erbium-doped zirconium fluoride-based fiber and utilizes the dual-wavelength pumping scheme. Stable, self-starting mode-locking with a minimum pulse duration of 53 ps was measured using a two-photon absorption autocorrelator. The longest wavelength demonstrated was 3612 nm and a maximum average power of 208 mW was achieved. This is the longest wavelength rare-earth doped mode-locked fiber laser demonstrated to the best of the authors' knowledge. The broad tunability promises potential uses for environmental sensing applications.

physics.optics↗

arXiv2019

An optical lock-in camera for advanced gravitational wave interferometers

Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used within a gravitational wave interferometer to directly image fields at a higher spatial and temporal resolution than previously possible. This improvement is achieved using a Pockels cell as a fast optical switch which transforms each pixel on a sCMOS array into an optical lock-in amplifier. We demonstrate that the optical lock-in camera can image fields with 2~Mpx resolution at 10~Hz with a sensitivity of -62~dBc when averaged over 2s.

astro-ph.IM↗

arXiv2018

Two-Photon Absorption and Saturable Absorption of Mid-IR in Graphene

We report on the response of graphene to high intensity mid-IR radiation and show that graphene exhibits saturable absorption and significant two-photon absorption in the spectral region from 1.55 $μ$m to 3.50 $μ$m (0.35 eV to 0.80 eV). We find that the effective modulation depth of multilayer graphene is limited by two-photon absorption which will affect its performance as a laser mode-locking element. The measured saturation intensities of femtosecond pulses were found to depend on the third power of photon energy when we combined our results with others reported in literature, while those of longer pulses were found to have a square root dependence.

physics.optics↗

arXiv2016

Numerical Modeling of 3.5 micron Dual-Wavelength Pumped Erbium Doped Mid-Infrared Fiber Lasers

The performance of mid-infrared erbium doped fiber lasers has dramatically improved in the last few years. In this paper we present a numerical model that provides valuable insight into the dynamics of a dual-wavelength pumped fiber laser that can operate on the 3.5 micron and 2.8 micron bands. This model is a much needed tool for optimizing and understanding the performance of these laser systems. Comparisons between simulation and experimental results for three different systems are presented.

physics.optics↗

arXiv2013

A New Class of Optical Beams for Large Baseline Interferometric Gravitational Wave Detectors

A folded resonant Fabry-Perot cavity has the potential to significantly reduce the impact of coating thermal noise on the performance of kilometer scale gravitational wave detectors. When constructed using only spherical mirror surfaces it is possible to utilize the extremely robust $TEM_{00}$ mode optical mode. In this paper we investigate the potential thermal noise improvements that can be achieved for third generation gravitational wave detectors using realistic constraints. Comparing the previously proposed beam configurations such as e.g. higher order Laguerre-Gauss modes, we find that similar or better thermal noise improvement factors can be achieved, while avoiding degeneracy issues associated with those beams.

gr-qc↗

arXiv2003

Effects of electrical charging on the mechanical Q of a fused silica disk

We report on the effects of an electrical charge on mechanical loss of a fused silica disk. A degradation of Q was seen that correlated with charge on the surface of the sample. We examine a number of models for charge damping, including eddy current damping and loss due to polarization. We conclude that rubbing friction between the sample and a piece of dust attracted by the charged sample is the most likely explanation for the observed loss.

gr-qc↗