Searcharxiv⌕ Search

arXiv subjects

David J. Singh

Publications and source records attributed to David J. Singh.

At least 37 records · Page 2Linked to original sources

Structural Instability and Magnetism of Superconducting KCr$_3$As$_3$

We find a lattice instability in the superconductor KCr$_3$As$_3$, corresponding to a distortion of the Cr metallic wires in the crystal structure. This distortion couples strongly to both the electronic and magnetic properties, in particular by making the electronic structure much more nearly one-dimensional, and by shifting the compound away from magnetism. We discuss the implications of these results in the context of the possibly unconventional superconductivity of this phase.

cond-mat.supr-con↗

Experimental identification of critical condition for drastically enhancing thermoelectric power factor of two-dimensional layered materials

Nano-structuring is an extremely promising path to high performance thermoelectrics. Favorable improvements in thermal conductivity are attainable in many material systems, and theoretical work points to large improvements in electronic properties. However, realization of the electronic benefits in practical materials has been elusive experimentally. A key challenge is that experimental identification of the quantum confinement length, below which the thermoelectric power factor is significantly enhanced, remains elusive due to lack of simultaneous control of size and carrier density. Here we investigate gate tunable and temperature-dependent thermoelectric transport in $γ$ phase indium selenide ($γ$ InSe, n type semiconductor) samples with thickness varying from 7 to 29 nm. This allows us to properly map out dimension and doping space. Combining theoretical and experimental studies, we reveal that the sharper pre-edge of the conduction-band density of states arising from quantum confinement gives rise to an enhancement of the Seebeck coefficient and the power factor in the thinner InSe samples. Most importantly, we experimentally identify the role of the competition between quantum confinement length and thermal de Broglie wavelength in the enhancement of power factor. Our results provide an important and general experimental guideline for optimizing the power factor and improving the thermoelectric performance of two-dimensional layered semiconductors.

cond-mat.mes-hall↗

Applicability of the strongly constrained and appropriately normed density functional to transition metal magnetism

We find that the recently developed self consistent and appropriately normed (SCAN) meta-generalized gradient approximation, which has been found to provide highly accurate results for many materials, is, however, not able to describe the stability and properties of phases of Fe important for steel. This is due to an overestimated tendency towards magnetism and exaggeration of magnetic energies, which we also find in other transition metals.

cond-mat.mtrl-sci↗

Thermal conductivity of perovskite KTaO3 and PbTiO3 from first principles

The low thermal conductivity of piezoelectric perovskites is a challenge for high power transducer applications. We report first principles calculations of the thermal conductivity of ferroelectric PbTiO$_3$ and the cubic nearly ferroelectric perovskite KTaO$_3$. The calculated thermal conductivity of PbTiO$_3$ is much lower than that of KTaO$_3$ in accord with experiment. Analysis of the results shows that the reason for the low thermal conductivity of PbTiO$_3$ is the presence of low frequency optical phonons associated with the polar modes. These are less dispersive in PbTiO$_3$, leading to a large three phonon scattering phase space. These differences between the two materials are associated with the $A$-site driven ferroelectricity of PbTiO$_3$ in contrast to the $B$-site driven near ferroelectricity of KTaO$_3$. The results are discussed in the context of modification of the thermal conductivity of electroactive materials.

cond-mat.mtrl-sci↗

Bismuth and Antimony Based Oxyhalides and Chalcohalides as Potential Optoelectronic Materials

In the last decade the ns$^2$ cations (e.g., Pb$^{2+}$ and Sn$^{2+}$) based halides have emerged as one of the most exciting new classes of optoelectronic materials, as exemplified by for instance hybrid perovskite solar absorbers. These materials not only exhibit unprecedented performance in some cases, but they also appear to break new ground with their unexpected properties, such as extreme tolerance to defects. However, because of the relatively recent emergence of this class of materials, there remain many yet to be fully explored compounds. Here we assess a series of bismuth/antimony oxyhalides and chalcohalides using consistent first principles methods to ascertain their properties and obtain trends. Based on these calculations, we identify a subset consisting of three types of compounds that may be promising as solar absorbers, transparent conductors, and radiation detectors. Their electronic structure, connection to the crystal geometry, and impact on band-edge dispersion and carrier effective mass are discussed.

cond-mat.mtrl-sci↗

Frustrated structural instability in superconducting quasi-one-dimensional K$_2$Cr$_3$As$_3$

We present neutron total scattering and density functional theory studies on quasi-one-dimensional superconducting K$_2$Cr$_3$As$_3$ revealing a frustrated structural instability. Our first principles calculations find a significant phonon instability which, under energy minimization, corresponds to a frustrated orthorhombic distortion. In diffraction studies we find large and temperature independent atomic displacement parameters which pair distribution analyses confirms and shows as resulting from highly localized orthorhombic distortions of the CrAs sublattice and coupled K displacements. These results suggest a far more complex phase diagram than previously assumed for this unusual superconductor with the likelihood of subtle interplays of structure, electron-phonon and magnetic interactions.

cond-mat.supr-con↗

Ideal Bandgap in a 2D Ruddlesden-Popper Perovskite Chalcogenide for Single-junction Solar Cells

Transition metal perovskite chalcogenides (TMPCs) are explored as stable, environmentally friendly semiconductors for solar energy conversion. They can be viewed as the inorganic alternatives to hybrid halide perovskites, and chalcogenide counterparts of perovskite oxides with desirable optoelectronic properties in the visible and infrared part of the electromagnetic spectrum. Past theoretical studies have predicted large absorption coefficient, desirable defect characteristics, and bulk photovoltaic effect in TMPCs. Despite recent progresses in polycrystalline synthesis and measurements of their optical properties, it is necessary to grow these materials in high crystalline quality to develop a fundamental understanding of their optical properties and evaluate their suitability for photovoltaic application. Here, we report the growth of single crystals of a two-dimensional (2D) perovskite chalcogenide, Ba3Zr2S7, with a natural superlattice-like structure of alternating double-layer perovskite blocks and single-layer rock salt structure. The material demonstrated a bright photoluminescence peak at 1.28 eV with a large external luminescence efficiency of up to 0.15%. We performed time-resolved photoluminescence spectroscopy on these crystals and obtained an effective recombination time of ~65 ns. These results clearly show that 2D Ruddlesden-Popper phases of perovskite chalcogenides are promising materials to achieve single-junction solar cells.

cond-mat.mtrl-sci↗

Spin-orbit coupled systems in the "atomic" limit: rhenates, osmates, iridates

Motivated by RIXS experiments on a wide range of complex heavy oxides, including rhenates, osmates, and iridates, we discuss the theory of RIXS for site-localized $t_{2g}$ orbital systems with strong spin-orbit coupling. For such systems, we present exact diagonalization results for the spectrum at different electron fillings, showing that it accesses "single-particle" and "multi-particle" excitations. This leads to a simple picture for the energies and intensities of the RIXS spectra in Mott insulators such as double perovskites which feature highly localized electrons, and yields estimates of the spin-orbit coupling and Hund's coupling in correlated $5d$ oxides. We present new higher resolution RIXS data at the Re-L$_3$ edge in Ba$_2$YReO$_6$ which finds a previously unresolved peak splitting, providing further confirmation of our theoretical predictions. Using ab initio electronic structure calculations on Ba$_2$${\cal M}$ReO$_6$ (with ${\cal M}$=Re, Os, Ir) we show that while the atomic limit yields a reasonable effective Hamiltonian description of the experimental observations, effects such as $t_{2g}$-$e_g$ interactions and hybridization with oxygen are important. Our ab initio estimate for the strength of the intersite exchange coupling shows that, compared to the osmates, the exchange is one or two orders of magnitude weaker in the rhenates and iridates, which may partly explain the suppression of long-range magnetic order in the latter compounds. As a way to interpolate between the site-localized picture and our electronic structure band calculations, we discuss the spin-orbital levels of the ${\cal M}$O$_6$ cluster. This suggests a possible role for non-dispersive intra-cluster excitons in Ba$_2$YIrO$_6$ which may lead to a weak breakdown of the atomic $J_{\rm eff}=0$ picture and to small magnetic moments.

cond-mat.str-el↗

Band-Gap Control via Structural and Chemical Tuning of Transition Metal Perovskite Chalcogenides

Transition metal perovskite chalcogenides (TMPC) are a new class of semiconductor materials with broad tunability of physical properties due to their chemical and structural flexibility. Theoretical calculations show that band gaps of TMPCs are tunable from Far IR to UV spectrum. Amongst these materials, more than a handful of materials have energy gap and very high absorption coefficients, which are appropriate for optoelectronic applications, especially solar energy conversion. Despite several promising theoretical predictions, very little experimental studies on their physical properties are currently available, especially optical properties. We report a new synthetic route towards high quality bulk ceramic TMPCs and systematic study of three phases, SrZrS3 in two different room temperature stabilized phases and one of BaZrS3. All three materials were synthesized with a catalyzed solid-state reaction process in sealed ampoules. Structural and chemical characterizations establish high quality of the samples, which is confirmed by the intense room temperature photoluminescence (PL) spectra showing direct band gaps around 1.53eV, 2.13eV and 1.81eV respectively. The potential of these materials for solar energy conversion was evaluated by measurement of PL quantum efficiency and estimate of quasi Fermi level splitting.

cond-mat.mtrl-sci↗

Properties of the ferroelectric visible light absorbing semiconductors: Sn$_2$P$_2$S$_6$ and Sn$_2$P$_2$Se$_6$

Ferroelectrics with suitable band gaps have recently attracted attention as candidate solar absorbing materials for photovoltaics. The inversion symmetry breaking may promote the separation of photo-excited carriers and allow voltages higher than the band gap. However, these effects are not fully understood, in part because of a lack of suitable model systems for studying these effects in detail. Here, we report properties of ferroelectric Sn$_2$P$_2$S$_6$ and Sn$_2$P$_2$Se$_6$ using first principles calculations. Results are given for the electronic structure, carrier pocket shapes, optical absorption and transport. We find indirect band gaps of 2.20 eV and 1.55 eV, respectively, and favorable band structures for carrier transport, including both holes and electrons. Strong absorption is found above the direct gaps of 2.43 eV and 1.76 eV. Thus these compounds may serve as useful model systems for understanding photovoltaic effects in ferroelectric semiconductors.

cond-mat.mtrl-sci↗

Electronic fitness function for screening semiconductors as thermoelectric materials

We introduce a simple but efficient electronic fitness function (EFF) that describes the electronic aspect of the thermoelectric performance. This EFF finds materials that overcome the inverse relationship between $σ$ and $S$ based on the complexity of the electronic structures regardless of specific origin (e.g., isosurface corrugation, valley degeneracy, heavy-light bands mixture, valley anisotropy or reduced dimensionality). This function is well suited for application in high throughput screening. We applied this function to 75 different thermoelectric and potential thermoelectric materials including full- and half-Heuslers, binary semiconductors and Zintl phases. We find an efficient screening using this transport function. The EFF identifies known high performance $p$- and $n$-type Zintl phases and half-Heuslers. In addition, we find some previously unstudied phases with superior EFF.

cond-mat.mtrl-sci↗

Prediction of Nontrivial Band Topology and Superconductivity in Mg$_2$Pb

The interplay of BCS superconductivity and nontrivial band topology is expected to give rise to opportunities for creating topological superconductors, achieved through pairing spin-filtered boundary modes via superconducting proximity effects. The thus-engineered topological superconductivity can, for example, facilitate the search for Majorana fermion quasiparticles in condensed matter systems. Here we report a first-principles study of Mg$_2$Pb and predict that it should be a superconducting topological material. The band topology of Mg$_2$Pb is identical to that of the archetypal quantum spin Hall insulator HgTe, while isostructural and isoelectronic Mg$_2$Sn is topologically trivial; a trivial to topological transition is predicted for Mg$_2$Sn$_{1-x}$Pb$_x$ for x~0.77. We propose that Mg$_2$Pb-Mg$_2$Sn quantum wells should generate robust spin-filtered edge currents in analogy to HgTe/CdTe quantum wells. In addition, our calculations predict that Mg$_2$Pb should become superconducting upon electron doping. Therefore, Mg$_2$Pb is expected to provide a practical material platform for studying emergent phenomena arising from the interplay of superconductivity and band topology.

cond-mat.supr-con↗

Sn(II)-containing phosphates as optoelectronic materials

We theoretically investigate Sn(II) phosphates as optoelectronic materials using first principles calculations. We focus on known prototype materials Sn$_n$P$_2$O$_{5+n}$ (n=2, 3, 4, 5) and a previously unreported compound, SnP$_2$O$_6$ (n=1), which we find using global optimization structure prediction. The electronic structure calculations indicate that these compounds all have large band gaps above 3.2 eV, meaning their transparency to visible light. Several of these compounds show relatively low hole effective masses ($\sim$2-3 m$_0$), comparable the electron masses. This suggests potential bipolar conductivity depending on doping. The dispersive valence band-edges underlying the low hole masses, originate from the anti-bonding hybridization between the Sn 5s orbitals and the phosphate groups. Analysis of structure-property relationships for the metastable structures generated during structure search shows considerable variation in combinations of band gap and carrier effective masses, implying chemical tunability of these properties. The unusual combinations of relatively high band gap, low carrier masses and high chemical stability suggests possible optoelectronic applications of these Sn(II) phosphates, including p-type transparent conductors. Related to this, calculations for doped material indicate low visible light absorption, combined with high plasma frequencies.

cond-mat.mtrl-sci↗

First-principles mode-by-mode analysis for electron-phonon scattering channels and mean free path spectra in GaAs

We present a first-principles framework to investigate the electron scattering channels and transport properties for polar material by combining the exact solution of linearized electron-phonon (e-ph) Boltzmann transport equation in its integral-differential form associated with the e-ph coupling matrices obtained from polar Wannier interpolation scheme. No ad hoc parameter is required throughout this calculation, and GaAs, a well-studied polar material, is used as an example to demonstrate this method. In this work, the long-range and short-range contributions as well as the intravalley and intervalley transitions in the e-ph interactions (EPIs) have been quantitatively addressed. Promoted by such mode-by-mode analysis, we find that in GaAs, the piezoelectric scattering is comparable to deformation-potential scattering for electron scatterings by acoustic phonons in EPI even at room temperature and makes a significant contribution to mobility. Furthermore, we achieved good agreements with experimental data for the mobility, and identified that electrons with mean free paths between 130 and 210 nm contribute dominantly to the electron transport at 300 K. Such information provides deeper understandings on the electron transport in GaAs, and the presented framework can be readily applied to other polar materials.

cond-mat.mtrl-sci↗

Non-rigid band shift and non-monotonic electronic structure changes upon doping in the normal state of the pnictide high temperature superconductor Ba2(Fe1-xCox)2As2

We report systematic Angle Resolved Photoemission (ARPES) experiments using different photon polarizations and experimental geometries and find that the doping evolution of the normal state of Ba(Fe1-xCox)2As2 deviates significantly from the predictions of a rigid band model. The data reveal a non-monotonic dependence upon doping of key quantities such as band filling, bandwidth of the electron pocket, and quasiparticle coherence. Our analysis suggests that the observed phenomenology and the inapplicability of the rigid band model in Co-doped Ba122 are due to electronic correlations, and not to either the size of the impurity potential, or self-energy effects due to impurity scattering. Our findings indicate that the effects of doping in pnictides are much more complicated than currently believed. More generally, they indicate that a deep understanding of the evolution of the electronic properties of the normal state, which requires an understanding of the doping process, remains elusive even for the 122 iron-pnictides, which are viewed as the least correlated of the high-TC unconventional superconductors.

cond-mat.supr-con↗

Design of ternary alkaline-earth metal Sn(II) oxides with potential good p-type conductivity

Oxides with good p-type conductivity have been long sought after to achieve high performance all-oxide optoelectronic devices. Divalent Sn(II) based oxides are promising candidates because of their rather dispersive upper valence bands caused by the Sn-5s/O-2p anti-bonding hybridization. There are so far few known Sn(II) oxides being p-type conductive suitable for device applications. Here, we present via first-principles global optimization structure searches a material design study for a hitherto unexplored Sn(II)-based system, ternary alkaline-earth metal Sn(II) oxides in the stoichiometry of MSn2O3 (M = Mg, Ca, Sr, Ba). We identify two stable compounds of SrSn2O3 and BaSn2O3, which can be stabilized by Sn-rich conditions in phase stability diagrams. Their structures follow the Zintl behaviour and consist of basic structural motifs of SnO3 tetrahedra. Unexpectedly they show distinct electronic properties with band gaps ranging from 1.90 (BaSn2O3) to 3.15 (SrSn2O3) eV, and hole effective masses ranging from 0.87 (BaSn2O3) to above 6.0 (SrSn2O3) m0. Further exploration of metastable phases indicates a wide tunability of electronic properties controlled by the details of the bonding between the basic structural motifs. This suggests further exploration of alkaline-earth metal Sn(II) oxides for potential applications requiring good p-type conductivity such as transparent conductors and photovoltaic absorbers.

cond-mat.mtrl-sci↗

Thermoelectric properties of $n$-type SrTiO3

We present an investigation of the thermoelectric properties of cubic perovskite SrTiO3. The results are derived from a combination of calculated transport functions obtained from Boltzmann transport theory in the constant scattering time approximation based on the electronic structure and existing experimental data for La-doped SrTiO3. The figure of merit ZT is modeled with respect to carrier concentration and temperature. The model predicts a relatively high $ZT$ at optimized doping, and suggests that the $ZT$ value can reach 0.7 at T = 1400 K. Thus $ZT$ can be improved from the current experimental values by carrier concentration optimization.

cond-mat.mtrl-sci↗

Competing covalent and ionic bonding in Ge-Sb-Te phase change materials

Ge2Sb2Te5 and related phase change materials are highly unusual in that they can be readily transformed between amorphous and crystalline states using very fast melt, quench, anneal cycles, although the resulting states are extremely long lived at ambient temperature. These states have remarkably different physical properties including very different optical constants in the visible in strong contrast to common glass formers such as silicates or phosphates. This behavior has been described in terms of resonant bonding, but puzzles remain, particularly regarding different physical properties of crystalline and amorphous phases. Here we show that there is a strong competition between ionic and covalent bonding in cubic phase providing a link between the chemical basis of phase change memory property and origins of giant responses of piezoelectric materials (PbTiO3, BiFeO3). This has important consequences for dynamical behavior in particular leading to a simultaneous hardening of acoustic modes and softening of high frequency optic modes in crystalline phase relative to amorphous. This different bonding in amorphous and crystalline phases provides a direct explanation for different physical properties and understanding of the combination of long time stability and rapid switching and may be useful in finding new phase change compositions with superior properties.

cond-mat.mtrl-sci↗