arXiv subjects

David King

Publications and source records attributed to David King.

At least 19 recordsLinked to original sources

arXiv2026

Commissioning and on-sky performance verification of iLocater

iLocater is a high-resolution near-infrared extreme precision radial velocity (EPRV) spectrograph that was deployed to the Large Binocular Telescope (LBT) in June 2026. iLocater operates over $\lambda=966-1312$ nm with a median resolving power of $R=205,000$ as measured in the laboratory. We present the commissioning and initial on-sky verification program using solar and night-time observations at the LBT. First light was achieved on 27 June 2026, and nearly 150 on-sky spectra have now been recorded. Observations include single stars ranging in spectral type from B5 to M6. iLocater uses the LBT AO system, and we have demonstrated its ability to obtain spatially resolved spectra of close ($\theta < 1''$) binary stars.

astro-ph.IM↗

arXiv2026

HARMONI at ELT: Reoptimization of the NGSS natural guide star sensors system for MCAO compatibility

HARMONI is the first-light, adaptive optics assisted, near-IR integral field spectrograph for the ELT. It covers a spectral range from below 800nm to 2400nm with resolving powers from 3000 to 7000 and spatial sampling of 25mas and 6mas. It can operate in three adaptive optics (AO) modes: single conjugate AO (SCAO), high-contrast AO (HCAO), and multi-conjugate AO (MCAO). The project is resuming its final design phase after a rescope design phase that has lasted two years. This paper describes the impact of the rescope on the natural guide star sensors (NGSS) system, imposing wide-ranging changes in particular to the low-order wavefront sensors (LOWFS) previously optimized for LTAO operation as well as on the external support and enclosure (ESE) whose external interfaces have changed. The high-contrast module (HCM) is also deeply affected due to the modified plate scale of the instrument, and the single-conjugate AO sensor (SCAOS) benefits from a reduced patrol field requirement. Description of the changes will be given together with the associated system analysis involving requirements flow-down, revisited functional analysis, and updated product breakdown structure. Elements of the new system management structure and work breakdown will also be included.

astro-ph.IM↗

arXiv2024

Resolving the Young 2 Cygni Run-away Star into a Binary using iLocater

Precision radial velocity (RV) spectrographs that use adaptive optics (AO) show promise to advance telescope observing capabilities beyond those of seeing-limited designs. We are building a spectrograph for the Large Binocular Telescope (LBT) named iLocater that uses AO to inject starlight directly into single mode fibers (SMF). iLocater's first acquisition camera system (the `SX' camera), which receives light from one of the 8.4m diameter primary mirrors of the LBT, was initially installed in summer 2019 and has since been used for several commissioning runs. We present results from first-light observations that include on-sky measurements as part of commissioning activities. Imaging measurements of the bright B3IV star 2 Cygni ($V=4.98$) resulted in the direct detection of a candidate companion star at an angular separation of only $\theta = 70$ mas. Follow-up AO measurements using Keck/NIRC2 recover the candidate companion in multiple filters. An $R\approx1500$ miniature spectrograph recently installed at the LBT named ``Lili'' provides spatially resolved spectra of each binary component, indicating similar spectral types and strengthening the case for companionship. Studying the multiplicity of young runaway star systems like 2 Cygni ($36.6 \pm 0.5$ Myr) can help to understand formation mechanisms for stars that exhibit anomalous velocities through the galaxy. This on-sky demonstration illustrates the spatial resolution of the iLocater SX acquisition camera working in tandem with the LBT AO system; it further derisks a number of technical hurdles involved in combining AO with Doppler spectroscopy.

astro-ph.IM↗

arXiv2024

Large Language Models and the Rationalist Empiricist Debate

To many Chomsky's debates with Quine and Skinner are an updated version of the Rationalist Empiricist debates of the 17th century. The consensus being that Chomsky's Rationalism was victorious. This dispute has reemerged with the advent of Large Language Models. With some arguing that LLMs vindicate rationalism because of the necessity of building in innate biases to make them work. The necessity of building in innate biases is taken to prove that empiricism hasn't got the conceptual resources to explain linguistic competence. Such claims depend on the nature of the empiricism one is endorsing. Externalized Empiricism has no difficulties with innate apparatus once they are determined empirically (Quine 1969). Thus, externalized empiricism is not refuted because of the need to build in innate biases in LLMs. Furthermore, the relevance of LLMs to the rationalist empiricist debate in relation to humans is dubious. For any claim about whether LLMs learn in an empiricist manner to be relevant to humans it needs to be shown that LLMs and humans learn in the same way. Two key features distinguish humans and LLMs. Humans learn despite a poverty of stimulus and LLMs learn because of an incredibly rich stimulus. Human linguistic outputs are grounded in sensory experience and LLMs are not. These differences in how the two learn indicates that they both use different underlying competencies to produce their output. Therefore, any claims about whether LLMs learn in an empiricist manner are not relevant to whether humans learn in an empiricist manner.

cs.CL↗

arXiv2022

The final design of the iLocater spectrograph: An optimized architecture for diffraction-limited EPRV instruments

iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into single-mode fibers that illuminate a high spectral resolution (R=190,500 median), cryogenic, diffraction-limited spectrograph. To maximize performance, the spectrograph uses a new design strategy for EPRV instruments, combining intrinsically stable materials for its optomechanical fabrication with precision optical fabrication. This novel combination will enable unique EPRV capabilities for exoplanet and astrophysics studies of the solar neighborhood. We present the final optical and mechanical designs of the spectrograph system. Ensuring the as-built spectrograph achieves its designed spectral resolution and diffraction-limited performance has required careful control of the end-to-end system wavefront error (WFE) budget. We discuss the efforts undertaken to achieve this goal including minimizing residual WFE in the optical design, assessing diffraction grating WFE performance, optimizing material choices, and requiring precision optical design and fabrication. Our goal is to deliver diffraction-limited performance across the full spectral format, which, combined with intrinsic thermal stability requirements for EPRV science, has driven the selection of silicon optics and Invar optomechanics. The system performance is further optimized using precision (sub-mK) thermal control. This set of design features will allow iLocater to achieve sub-m/s radial velocity precision in the near-infrared, and to serve as the first optimized diffraction-limited spectrograph for EPRV science.

astro-ph.IM↗

arXiv2018

A Radial Velocity Error Budget for Single-mode Fiber Doppler Spectrographs

Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater's design is used to quantify and assess the relative advantages and drawbacks of precise Doppler time series measurements made at the diffraction limit. This framework can be applied for trade-study work to investigate the impact of instrument design decisions on systematic uncertainties encountered in the regime of sub-meter-per-second precision. We find that working at the diffraction-limit through the use of AO and SMF's allows for high spectral resolution and improved instrument stability at the expense of limiting magnitude and longer integration times. Large telescopes equipped with AO alleviates the primary challenges of SMF spectrographs.

astro-ph.IM↗

arXiv2018

Instrument Simulator and Data Reduction Pipeline for the iLocater Spectrograph

iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to generate extremely precise RV measurements, it differs from conventional Doppler spectrographs, and therefore carries additional risk. To aid with the design of the instrument, we have developed a comprehensive simulator and data reduction pipeline. In this paper, we describe the simulation code and quantify its performance in the context of understanding terms in a RV error budget. We find that the program has an intrinsic precision of $\sigma < 5$ cm/s, thereby justifying its use in a number of instrument trade studies. The code is written in Matlab and available for download on GitHub.

astro-ph.IM↗

arXiv2017

Mathematical modelling of variable porosity coatings for controlled drug release

In this paper we investigate the extent to which variable porosity drug-eluting coatings can provide better control over drug release than coatings where the porosity is constant throughout. In particular, we aim to establish the potential benefits of replacing a single-layer with a two-layer coating of identical total thickness and initial drug mass. In our study, what distinguishes the layers (other than their individual thickness and initial drug loading) is the underlying microstructure, and in particular the effective porosity and the tortuosity of the material. We consider the effect on the drug release profile of varying the initial distribution of drug, the relative thickness of the layers and the relative resistance to diffusion offered by each layer's composition. Our results indicate that the contrast in properties of the two layers can be used as a means of better controlling the release, and that the quantity of drug delivered in the early stages can be modulated by varying the distribution of drug across the layers. We conclude that microstructural and loading differences between multi-layer variable porosity coatings can be used to tune the properties of the coating materials to obtain the desired drug release profile for a given application.

physics.flu-dyn↗

arXiv2016

iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope

We are developing a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.

astro-ph.IM↗

arXiv2016

An instrumental puzzle: the modular integration of AOLI

The Adaptive Optics Lucky Imager, AOLI, is an instrument developed to deliver the highest spatial resolution ever obtained in the visible, 20 mas, from ground-based telescopes. In AOLI a new philosophy of instrumental prototyping has been applied, based on the modularization of the subsystems. This modular concept offers maximum flexibility regarding the instrument, telescope or the addition of future developments.

astro-ph.IM↗

arXiv2016

AOLI: Near-diffraction limited imaging in the visible on large ground-based telescopes

The combination of Lucky Imaging with a low order adaptive optics system was demonstrated very successfully on the Palomar 5m telescope nearly 10 years ago. It is still the only system to give such high-resolution images in the visible or near infrared on ground-based telescope of faint astronomical targets. The development of AOLI for deployment initially on the WHT 4.2 m telescope in La Palma, Canary Islands, will be described in this paper. In particular, we will look at the design and status of our low order curvature wavefront sensor which has been somewhat simplified to make it more efficient, ensuring coverage over much of the sky with natural guide stars as reference object. AOLI uses optically butted electron multiplying CCDs to give an imaging array of 2000 x 2000 pixels.

astro-ph.IM↗

arXiv2016

Characterization of the Companion to $\mu$ Her

$\mu$ Her is a nearby quadruple system with a G-subgiant primary and several low mass companions arranged in a 2+2 architecture. While the BC components have been well characterized, the Ab component has been detected astrometrically and with direct imaging but there has been some confusion over its nature, in particular whether the companion is stellar or substellar. Using near-infrared spectroscopy we are able to estimate the spectral type of the companion as a M4$\pm$1V star. In addition, we have measured the astrometry of the system for over a decade. We combined the astrometry with archival radial velocity measurements to compute an orbit of the system. From the combined orbit, we are able to compute the mass sum of the system. Using the estimated mass of the primary, we estimate the mass of the secondary as 0.32 M_sun, which agrees with the estimated spectral type. Our computed orbit is preliminary due to the incomplete orbital phase coverage, but it should be sufficient to predict ephemerides over the next decade.

astro-ph.SR↗

arXiv2015

Design of the iLocater Acquisition Camera Demonstration System

Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.

astro-ph.IM↗

arXiv2015

Know the Star, Know the Planet. V. Characterization of the Stellar Companion to the Exoplanet Host HD 177830

HD 177830 is an evolved K0IV star with two known exoplanets. In addition to the planetary companions it has a late-type stellar companion discovered with adaptive optics imagery. We observed the binary star system with the PHARO near-IR camera and the Project 1640 coronagraph. Using the Project 1640 coronagraph and integral field spectrograph we extracted a spectrum of the stellar companion. This allowed us to determine that the spectral type of the stellar companion is a M4$\pm$1V. We used both instruments to measure the astrometry of the binary system. Combining these data with published data, we determined that the binary star has a likely period of approximately 800 years with a semi-major axis of 100-200 AU. This implies that the stellar companion has had little or no impact on the dynamics of the exoplanets. The astrometry of the system should continue to be monitored, but due to the slow nature of the system, observations can be made once every 5-10 years.

astro-ph.SR↗

arXiv2013

The Kappa Andromedae System: New Constraints on the Companion Mass, System Age & Further Multiplicity

Kappa Andromedae is a B9IVn star at 52 pc for which a faint substellar companion separated by 55 AU was recently announced. In this work, we present the first spectrum of the companion, "kappa And B," using the Project 1640 high-contrast imaging platform. Comparison of our low-resolution YJH-band spectra to empirical brown dwarf spectra suggests an early-L spectral type. Fitting synthetic spectra from PHOENIX model atmospheres to our observed spectrum allows us to constrain the effective temperature to ~2000K, as well as place constraints on the companion surface gravity. Further, we use previously reported log(g) and effective temperature measurements of the host star to argue that the kappa And system has an isochronal age of 220 +/- 100 Myr, older than the 30 Myr age reported previously. This interpretation of an older age is corroborated by the photometric properties of kappa And B, which appear to be marginally inconsistent with other 10-100 Myr low-gravity L-dwarfs for the spectral type range we derive. In addition, we use Keck aperture masking interferometry combined with published radial velocity measurements to rule out the existence of any tight stellar companions to kappa And A that might be responsible for the system's overluminosity. Further, we show that luminosity enhancements due to a nearly "pole-on" viewing angle coupled with extremely rapid rotation is unlikely. Kappa And A is thus consistent with its slightly evolved luminosity class (IV) and we propose here that kappa And, with a revised age of 220 +/- 100 Myr, is an interloper to the 30 Myr Columba association with which it was previously associated. The photometric and spectroscopic evidence for kappa And B combined with our re-assesment of the system age implies a substellar companion mass of 50^{+16}_{-13} Jupiter Masses, consistent with a brown dwarf rather than a planetary mass companion.

astro-ph.EP↗

arXiv2012

4MOST - 4-metre Multi-Object Spectroscopic Telescope

The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R~5000 ({\lambda}=390-1000 nm) and more than 2 million spectra at R~20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. We consider two fibre positioner concepts, a well-known Phi-Theta system and a new R-Theta concept with a large patrol area. The spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. Mock catalogues with template spectra from seven Design Reference Surveys are simulated to verify the science requirements of 4MOST. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.

astro-ph.IM↗

arXiv2012

Spectral Typing of Late Type Stellar Companions to Young Stars from Low Dispersion Near-Infrared Integral Field Unit Data

We used the Project 1640 near-infrared coronagraph and integral field spectrograph to observe 19 young solar type stars. Five of these stars are known binary stars and we detected the late-type secondaries and were able to measure their JH spectra with a resolution of R\sim30. The reduced, extracted, and calibrated spectra were compared to template spectra from the IRTF spectral library. With this comparison we test the accuracy and consistency of spectral type determination with the low-resolution near-infrared spectra from P1640. Additionally, we determine effective temperature and surface gravity of the companions by fitting synthetic spectra calculated with the PHOENIX model atmosphere code. We also present several new epochs of astrometry of each of the systems. Together these data increase our knowledge and understanding of the stellar make up of these systems. In addition to the astronomical results, the analysis presented helps validate the Project 1640 data reduction and spectral extraction processes and the utility of low-resolution, near-infrared spectra for characterizing late-type companions in multiple systems.

astro-ph.SR↗

arXiv2010

Speckle Suppression with the Project 1640 Integral Field Spectrograph

Project 1640 is a high-contrast imaging instrument recently commissioned at Palomar observatory. A combination of a coronagraph with an integral field spectrograph (IFS), Project 1640 is designed to detect and characterize extrasolar planets, brown dwarfs, and circumstellar material orbiting nearby stars. In this paper, we present our data processing techniques for improving upon instrument raw sensitivity via the removal of quasi-static speckles. Our approach utilizes the chromatic image diversity provided by the IFS in combination with the locally-optimized combination of images (LOCI) algorithm to suppress the intensity of residual contaminating light in close angular proximity to target stars. We describe the Project 1640 speckle suppression pipeline (PSSP) and demonstrate the ability to detect companions with brightness comparable to and below that of initial speckle intensities using on-sky commissioning data. Our preliminary results indicate that suppression factors of at least one order of magnitude are consistently possible, reaching $5\sigma$ contrast levels of $2.1\times10^{-5}$ at $1\arcsec$ in the H-band in 20 minutes of on-source integration time when non-common-path errors are reasonably well-calibrated. These results suggest that near-infrared contrast levels of order $\approx10^{-7}$ at subarcsecond separations will soon be possible for Project 1640 and similarly designed instruments that receive a diffraction-limited beam corrected by adaptive optics (AO) systems employing deformable mirrors with high actuator-density.

astro-ph.IM↗