SearcharxivSearch

arXiv subjects

David Lou Alon

Publications and source records attributed to David Lou Alon.

11 recordsLinked to original sources

Conditional Flow Matching for Visually-Guided Acoustic Highlighting

Visually-guided acoustic highlighting seeks to rebalance audio in alignment with the accompanying video, creating a coherent audio-visual experience. While visual saliency and enhancement have been widely studied, acoustic highlighting remains underexplored, often leading to misalignment between visual and auditory focus. Existing approaches use discriminative models, which struggle with the inherent ambiguity in audio remixing, where no natural one-to-one mapping exists between poorly-balanced and well-balanced audio mixes. To address this limitation, we reframe this task as a generative problem and introduce a Conditional Flow Matching (CFM) framework. A key challenge in iterative flow-based generation is that early prediction errors -- in selecting the correct source to enhance -- compound over steps and push trajectories off-manifold. To address this, we introduce a rollout loss that penalizes drift at the final step, encouraging self-correcting trajectories and stabilizing long-range flow integration. We further propose a conditioning module that fuses audio and visual cues before vector field regression, enabling explicit cross-modal source selection. Extensive quantitative and qualitative evaluations show that our method consistently surpasses the previous state-of-the-art discriminative approach, establishing that visually-guided audio remixing is best addressed through generative modeling.

eess.AS

Array-Aware Ambisonics and HRTF Encoding for Binaural Reproduction With Wearable Arrays

This work introduces a novel method for binaural reproduction from arbitrary microphone arrays, based on array-aware optimization of Ambisonics encoding through Head-Related Transfer Function (HRTF) pre-processing. The proposed approach integrates array-specific information into the HRTF processing pipeline, leading to improved spatial accuracy in binaural rendering. Objective evaluations demonstrate superior performance under simulated wearable-array and head rotations compared to conventional Ambisonics encoding method. A listening experiment further confirms that the method achieves significantly higher perceptual ratings in both timbre and spatial quality. Fully compatible with standard Ambisonics, the proposed method offers a practical solution for spatial audio rendering in applications such as virtual reality, augmented reality, and wearable audio capture.

eess.AS

Binaural Signal Matching with Wearable Arrays for Near-Field Sources and Directional Focus

This paper investigates the performance of Binaural Signal Matching (BSM) methods for near-field sound reproduction using a wearable glasses-mounted microphone array. BSM is a flexible, signal-independent approach for binaural rendering with arbitrary arrays, but its conventional formulation assumes far-field sources. In our previous work, we proposed a near-field extension of BSM (NF-BSM) that incorporates distance-dependent modeling and showed improved performance over far-field BSM using analytic data, though degradation persisted for sources very close to the array. In this study, we extend that analysis by using realistic simulated data of near-field Head-Related Transfer Functions (HRTFs) and Acoustic Transfer Functions (ATFs) of the array, accounting for listener head rotation and evaluating binaural cues such as interaural level and time differences (ILD and ITD). A key contribution is the introduction of a Field of View (FoV) weighting, designed to emphasize perceptually relevant directions and improve robustness under challenging conditions. Results from both simulation and a listening test confirm that NF-BSM outperforms traditional far-field BSM in near-field scenarios, and that the proposed NF-FoV-BSM method achieves the best perceptual and objective quality among all tested methods, particularly at close source distances and under head rotation. These findings highlight the limitations for far-field models in near-field sources and demonstrate that incorporating source distance and directional weighting can significantly improve binaural reproduction performance for wearable spatial audio systems.

eess.AS

Mixture-of-Experts Framework for Field-of-View Enhanced Signal-Dependent Binauralization of Moving Talkers

We propose a novel mixture of experts framework for field-of-view enhancement in binaural signal matching. Our approach enables dynamic spatial audio rendering that adapts to continuous talker motion, allowing users to emphasize or suppress sounds from selected directions while preserving natural binaural cues. Unlike traditional methods that rely on explicit direction-of-arrival estimation or operate in the Ambisonics domain, our signal-dependent framework combines multiple binaural filters in an online manner using implicit localization. This allows for real-time tracking and enhancement of moving sound sources, supporting applications such as speech focus, noise reduction, and world-locked audio in augmented and virtual reality. The method is agnostic to array geometry offering a flexible solution for spatial audio capture and personalized playback in next-generation consumer audio devices.

cs.SD

Binaural Signal Matching with Wearable Arrays for Near-Field Sources

Binaural reproduction methods aim to recreate an acoustic scene for a listener over headphones, offering immersive experiences in applications such as Virtual Reality (VR) and teleconferencing. Among the existing approaches, the Binaural Signal Matching (BSM) algorithm has demonstrated high quality reproduction due to its signal-independent formulation and the flexibility of unconstrained array geometry. However, this method assumes far-field sources and has not yet been investigated for near-field scenarios. This study evaluates the performance of BSM for near-field sources. Analysis of a semi-circular array around a rigid sphere, modeling head-mounted devices, show that far-field BSM performs adequately for sources up to approximately tens of centimeters from the array. However, for sources closer than this range, the binaural error increases significantly. Incorporating a near-field BSM design, which accounts for the source distance, significantly reduces the error, particularly for these very-close distances, highlighting the benefits of near-field modeling in improving reproduction accuracy.

eess.AS

BSM-iMagLS: ILD Informed Binaural Signal Matching for Reproduction with Head-Mounted Microphone Arrays

Headphone listening in applications such as augmented and virtual reality (AR and VR) relies on high-quality spatial audio to ensure immersion, making accurate binaural reproduction a critical component. As capture devices, wearable arrays with only a few microphones with irregular arrangement face challenges in achieving a reproduction quality comparable to that of arrays with a large number of microphones. Binaural signal matching (BSM) has recently been presented as a signal-independent approach for generating high-quality binaural signal using only a few microphones, which is further improved using magnitude-least squares (MagLS) optimization at high frequencies. This paper extends BSM with MagLS by introducing interaural level difference (ILD) into the MagLS, integrated into BSM (BSM-iMagLS). Using a deep neural network (DNN)-based solver, BSM-iMagLS achieves joint optimization of magnitude, ILD, and magnitude derivatives, improving spatial fidelity. Performance is validated through theoretical analysis, numerical simulations with diverse HRTFs and head-mounted array geometries, and listening experiments, demonstrating a substantial reduction in ILD errors while maintaining comparable magnitude accuracy to state-of-the-art solutions. The results highlight the potential of BSM-iMagLS to enhance binaural reproduction for wearable and portable devices.

eess.AS

Blind Localization of Early Room Reflections with Arbitrary Microphone Array

Blindly estimating the direction of arrival (DoA) of early room reflections without prior knowledge of the room impulse response or source signal is highly valuable in audio signal processing applications. The FF-PHALCOR (Frequency Focusing PHase ALigned CORrelation) method was recently developed for this purpose, extending the original PHALCOR method to work with arbitrary arrays rather than just spherical ones. Previous studies have provided only initial insights into its performance. This study offers a comprehensive analysis of the method's performance and limitations, examining how reflection characteristics such as delay, amplitude, and spatial density affect its effectiveness. The research also proposes improvements to overcome these limitations, enhancing detection quality and reducing false alarms. Additionally, the study examined how spatial perception is affected by generating room impulse responses using estimated reflection information. The findings suggest a perceptual advantage of the proposed approach over the baseline, with particularly high perceptual quality when using the spherical array with 32 microphones. However, the quality is somewhat reduced when using a semi-circular array with only 6 microphones.

eess.AS

Assessing the Potential Impact of Direction-Dependent HRTF Selection on Sound Localization Accuracy

This study investigates the approach of direction-dependent selection of Head-Related Transfer Functions (HRTFs) and its impact on sound localization accuracy. For applications such as virtual reality (VR) and teleconferencing, obtaining individualized HRTFs can be beneficial yet challenging, the objective of this work is therefore to assess whether incorporating HRTFs in a direction-dependent manner could improve localization precision without the need to obtain individualized HRTFs. A localization experiment conducted with a VR headset assessed localization errors, comparing an overall best HRTF from a set, against selecting the best HRTF based on average performance in each direction. The results demonstrate a substantial improvement in elevation localization error with the method motivated by direction-dependent HRTF selection, while revealing insignificant differences in azimuth errors.

eess.AS

Feasibility of iMagLS-BSM -- ILD Informed Binaural Signal Matching with Arbitrary Microphone Arrays

Binaural reproduction for headphone-centric listening has become a focal point in ongoing research, particularly within the realm of advancing technologies such as augmented and virtual reality (AR and VR). The demand for high-quality spatial audio in these applications is essential to uphold a seamless sense of immersion. However, challenges arise from wearable recording devices equipped with only a limited number of microphones and irregular microphone placements due to design constraints. These factors contribute to limited reproduction quality compared to reference signals captured by high-order microphone arrays. This paper introduces a novel optimization loss tailored for a beamforming-based, signal-independent binaural reproduction scheme. This method, named iMagLS-BSM incorporates an interaural level difference (ILD) error term into the previously proposed binaural signal matching (BSM) magnitude least squares (MagLS) rendering loss for lateral plane angles. The method leverages nonlinear programming to minimize the introduced loss. Preliminary results show a substantial reduction in ILD error, while maintaining a binaural magnitude error comparable to that achieved with a MagLS BSM solution. These findings hold promise for enhancing the overall spatial quality of resultant binaural signals.

eess.AS

On HRTF Notch Frequency Prediction Using Anthropometric Features and Neural Networks

High fidelity spatial audio often performs better when produced using a personalized head-related transfer function (HRTF). However, the direct acquisition of HRTFs is cumbersome and requires specialized equipment. Thus, many personalization methods estimate HRTF features from easily obtained anthropometric features of the pinna, head, and torso. The first HRTF notch frequency (N1) is known to be a dominant feature in elevation localization, and thus a useful feature for HRTF personalization. This paper describes the prediction of N1 frequency from pinna anthropometry using a neural model. Prediction is performed separately on three databases, both simulated and measured, and then by domain mixing in-between the databases. The model successfully predicts N1 frequency for individual databases and by domain mixing between some databases. Prediction errors are better or comparable to those previously reported, showing significant improvement when acquired over a large database and with a larger output range.

eess.AS

iMagLS: Interaural Level Difference with Magnitude Least-Squares Loss for Optimized First-Order Head-Related Transfer Function

Binaural reproduction for headphone-based listening is an active research area due to its widespread use in evolving technologies such as augmented and virtual reality (AR and VR). On the one hand, these applications demand high quality spatial audio perception to preserve the sense of immersion. On the other hand, recording devices may only have a few microphones, leading to low-order representations such as first-order Ambisonics (FOA). However, first-order Ambisonics leads to limited externalization and spatial resolution. In this paper, a novel head-related transfer function (HRTF) preprocessing optimization loss is proposed, and is minimized using nonlinear programming. The new method, denoted iMagLS, involves the introduction of an interaural level difference (ILD) error term to the now widely used MagLS optimization loss for the lateral plane angles. Results indicate that the ILD error could be substantially reduced, while the HRTF magnitude error remains similar to that obtained with MagLS. These results could prove beneficial to the overall spatial quality of first-order Ambisonics, while other reproduction methods could also benefit from considering this modified loss.

eess.AS