SearcharxivSearch

arXiv subjects

David M. Fobes

Publications and source records attributed to David M. Fobes.

8 recordsLinked to original sources

Smoothed Two-Stage Decomposition Algorithm for Solving Large-Scale Transmission and Distribution AC-OPF Problems

The integration of distributed energy resources (DERs) into the power grid has introduced new challenges to AC optimal power flow (AC-OPF) problems. Traditional OPF optimize consider transmission systems, treating distribution networks as static loads. However, the growing presence of DERs makes accurate distribution system modeling crucial for grid operations. Consequently, efficiently solving the resultant large-scale, nonconvex transmission and distribution (T&D) AC-OPF problem remains a significant challenge. This paper proposes a Smoothed Two-Stage Decomposition Optimizer (StsDOpt) to address these complexities by decomposing the T&D AC-OPF problem into a master-subproblem(s) structure, enabling parallel solving. Unlike traditional methods, StsDOpt does not rely on approximations or relaxations. It uses a smoothing technique to render the subproblems responses differentiable with respect to the master problem, leveraging the barrier problem properties inherent in primal-dual interior point methods. This approach is crucial for accurately modeling and solving distribution systems, which are multiphase, unbalanced, and nonlinear, distinguishing StsDOpt apart from other methods. Integrated into the PowerModelsITD framework, StsDOpt has been validated through numerical experiments, demonstrating reduced wall-clock solve time and increased scalability. Results highlight its efficacy as a robust, scalable solution for large-scale T&D AC-OPF problems, facilitating the reliable integration of DERs into complex T&D systems.

math.OC

Load Block Modeling in Distribution Systems: Network Reconfiguration for Load Restoration

The distribution system restoration (DSR) problem has received considerable attention over the last decade or more. Solutions to the DSR problem identify the best set or sequence of actions to perform on a distribution circuit to restore service after a disruption. The problem is challenging from a computational perspective, with engineering constraints specific to distribution systems, such as radial operations, that are difficult to effectively model. In this paper, we revisit the model for how specific loads are shed, energized and restored--and develop a formulation that more accurately models the requirements of load shedding, load energizing and restoration in distribution systems.

eess.SY

Reconfiguration and Real-Time Operation of Networked Microgrids Under Load Uncertainty

Distribution networks are increasingly exposed to threats such as extreme weather, aging infrastructure, and cyber risks--resulting in more frequent contingencies and outages, a trend likely to persist. Microgrids, particularly dynamic networked microgrids (DNMGs), offer a promising solution to mitigate the impacts of such contingencies and enhance resiliency. However, distribution networks present unique challenges due to their unbalanced nature and the inherent uncertainty in both loads and generation. This paper builds upon our prior work on the two-stage mixed-integer robust optimization problem for configuring DNMGs, improving the solve time and scalability. Furthermore, we present a model-free, real-time optimal power flow algorithm to manage DNMG operations in the time between reconfigurations. A case study on a realistic network based on part of the San Francisco Bay Area demonstrates the scalability of both approaches. The case study also illustrates the ability to maintain power flow feasibility as loads vary and operating conditions change when the methods are used in tandem.

math.OC

Robust Partitioning and Operation for Maximal Uncertain-Load Delivery in Distribution Grids

To mitigate the vulnerability of distribution grids to severe weather events, some electric utilities use preemptive de-energization as the primary line of defense, causing significant power outages. In such instances, networked microgrids could improve resiliency and maximize load delivery, though the modeling of three-phase unbalanced network physics and computational complexity pose challenges. These challenges are further exacerbated by an increased penetration of uncertain loads. In this paper, we present a two-stage mixed-integer robust optimization problem that configures and operates networked microgrids, and is guaranteed to be robust and feasible to all realizations of loads within a specified uncertainty set, while maximizing load delivery. To solve this problem, we propose a cutting-plane algorithm, with convergence guarantees, which approximates a convex recourse function with sub-gradient cuts. Finally, we provide a detailed case study on the IEEE 37-bus test system to demonstrate the economic benefits of networking microgrids to maximize uncertain-load delivery.

math.OC

Modeling and Rapid Prototyping of Integrated Transmission-Distribution OPF Formulations with PowerModelsITD.jl

Conventional electric power systems are composed of different unidirectional power flow stages of generation, transmission, and distribution, managed independently by transmission system and distribution system operators. However, as distribution systems increase in complexity due to the integration of distributed energy resources, coordination between transmission and distribution networks will be imperative for the optimal operation of the power grid. However, coupling models and formulations between transmission and distribution is non-trivial, in particular due to the common practice of modeling transmission systems as single-phase, and distribution systems as multi-conductor phase-unbalanced. To enable the rapid prototyping of power flow formulations, in particular in the modeling of the boundary conditions between these two seemingly incompatible data models, we introduce PowerModelsITD.jl, a free, open-source toolkit written in Julia for integrated transmission-distribution (ITD) optimization that leverages mature optimization libraries from the InfrastructureModels.jl-ecosystem. The primary objective of the proposed framework is to provide baseline implementations of steady-state ITD optimization problems, while providing a common platform for the evaluation of emerging formulations and optimization problems. In this work, we introduce the nonlinear formulations currently supported in PowerModelsITD.jl, which include AC-polar, AC-rectangular, current-voltage, and a linear network transportation model. Results are validated using combinations of IEEE transmission and distribution networks.

eess.SY

The ISTI Rapid Response on Exploring Cloud Computing 2018

This report describes eighteen projects that explored how commercial cloud computing services can be utilized for scientific computation at national laboratories. These demonstrations ranged from deploying proprietary software in a cloud environment to leveraging established cloud-based analytics workflows for processing scientific datasets. By and large, the projects were successful and collectively they suggest that cloud computing can be a valuable computational resource for scientific computation at national laboratories.

cs.DC

Versatile Strain-Tuning of Modulated Long-Period Magnetic Structures

We report a detailed small-angle neutron scattering (SANS) study of the skyrmion lattice phase of MnSi under compressive and tensile strain. In particular, we demonstrate that tensile strain applied in the skyrmion lattice plane, perpendicular to the magnetic field, acts to destabilize the skyrmion lattice phase. This experiment was enabled by our development of a versatile strain cell, unique in its ability to select the application of either tensile or compressive strain in-situ by using two independent helium-actuated copper pressure transducers, whose design has been optimized for magnetic SANS on modulated long-period magnetic structures and vortex lattices, and is compact enough to fit in common sample environments, such as cryostats and superconducting magnets.

cond-mat.str-el

"Forbidden" phonon: dynamical signature of bond symmetry breaking in the iron chalcogenides

Investigation of the inelastic neutron scattering spectra in Fe$_{1+y}$Te$_{1-x}$Se$_{x}$ near a signature wave vector $\mathbf{Q} = (1,0,0)$ for the bond-order wave (BOW) formation of parent compound Fe$_{1+y}$Te [Phys. Rev. Lett. 112, 187202 (2014)] reveals an acoustic-phonon-like dispersion present in all structural phases. While a structural Bragg peak accompanies the mode in the low-temperature phase of Fe$_{1+y}$Te, it is absent in the high-temperature tetragonal phase, where Bragg scattering at this $\mathbf{Q}$ is forbidden by symmetry. Notably, this mode is also observed in superconducting FeTe$_{0.55}$Se$_{0.45}$, where structural and magnetic transitions are suppressed, and no BOW has been observed. The presence of this "forbidden" phonon indicates that the lattice symmetry is dynamically or locally broken by magneto-orbital BOW fluctuations, which are strongly coupled to lattice in these materials.

cond-mat.str-el