arXiv subjects

David Montgomery

Publications and source records attributed to David Montgomery.

9 recordsLinked to original sources

arXiv2026

ANDES, the high-resolution spectrograph for the ELT: design and performance analysis of the YJH spectrograph

The ArmazoNes high Dispersion Echelle Spectrograph (ANDES) is a powerful second-generation high-resolution spectroscopic instrument for the Extremely Large Telescope (ELT). The UBV, RIZ, and YJH modules comprise fibre-fed spectrographs of the ANDES baseline design and will offer continuous wavelength coverage of 0.35-1.8 $\mu$m, with the addition of a K-band channel providing coverage up to 2.4 $\mu$m. Coupled with a spectral resolution of $\sim$100,000, ANDES must deliver the required wavelength calibration stability of 1 m/s over 24 hours, with a goal of 0.02 m/s across 10 years. These requirements establish the framework for the infrared module of ANDES, the YJH Spectrograph, leading to what will likely be the largest cryogenic, ultra-stable, high-resolution spectrograph ever built, and will offer the unique ability to observe in both seeing- and diffraction-limited modes interchangeably. We present the current design and performance analysis of the ANDES YJH Spectrograph, outlining the engineering challenges encountered alongside the corresponding strategies adopted to navigate them. In particular, we detail the technology development of the primary dispersing element, an echelle grating mosaic that will span over a metre in length.

astro-ph.IM↗

arXiv2024

Flexure based fibre positioners: design optimisation to follow arbitrary focal plane curvature

The use of flexures to achieve fibre positioner motion is being actively investigated by several institutes, for example at the UK Astronomy Technology Centre (UKATC) and Leibniz-Institute for Astrophysics Potsdam. One challenge when designing with flexures is the large number of degrees of freedom available which makes it difficult or impossible to optimise their motion by hand. In this paper we demonstrate two approaches for optimising flexure geometry to follow arbitrary focal surface curvature and to orient the optical fibre with arbitrary tilt. These approaches are: analytical using MATLAB models and FEA based using Ansys. The approaches are complementary allowing the designer to efficiently explore the parameter space and then do precise optimisation of the flexure geometry. We demonstrate the applicability both to the UKATCs preferred design for WST, and to flexure-based fibre positioner designs generally. We also present a sensitivity analysis relating small changes in design parameters to changes in fibre tip motion. Finally we briefly present the UKATCs preferred geometry for the WST fibre positioner.

astro-ph.IM↗

arXiv2023

clotFoam: An Open-Source Framework to Simulate Blood Clot Formation Under Arterial Flow

Blood clotting involves the coupled processes of platelet aggregation and coagulation. Simulating clotting under flow in complex geometries is challenging due to multiple temporal and spatial scales and high computational cost. clotFoam is an open-source software developed in OpenFOAM that employs a continuum model of platelet advection, diffusion, and aggregation in a dynamic fluid environment and a simplified coagulation model with proteins that advect, diffuse, and react within the fluid and with wall-bound species through reactive boundary conditions. Our framework provides the foundation on which one can build more complex models and perform reliable simulations in almost any computational domain.

physics.flu-dyn↗

arXiv2022

Learning Generic Lung Ultrasound Biomarkers for Decoupling Feature Extraction from Downstream Tasks

Contemporary artificial neural networks (ANN) are trained end-to-end, jointly learning both features and classifiers for the task of interest. Though enormously effective, this paradigm imposes significant costs in assembling annotated task-specific datasets and training large-scale networks. We propose to decouple feature learning from downstream lung ultrasound tasks by introducing an auxiliary pre-task of visual biomarker classification. We demonstrate that one can learn an informative, concise, and interpretable feature space from ultrasound videos by training models for predicting biomarker labels. Notably, biomarker feature extractors can be trained from data annotated with weak video-scale supervision. These features can be used by a variety of downstream Expert models targeted for diverse clinical tasks (Diagnosis, lung severity, S/F ratio). Crucially, task-specific expert models are comparable in accuracy to end-to-end models directly trained for such target tasks, while being significantly lower cost to train.

eess.IV↗

arXiv2017

Charged particle diffusion in isotropic random magnetic fields

The investigation of the diffusive transport of charged particles in a turbulent magnetic field remains a subject of considerable interest. Research has most frequently concentrated on determining the diffusion coefficient in the presence of a mean magnetic field. Here we consider diffusion of charged particles in fully three-dimensional isotropic turbulent magnetic fields with no mean field, which may be pertinent to many astrophysical situations. We identify different ranges of particle energy depending upon the ratio of the Larmor radius of the charged particle to the characteristic outer length scale of the turbulence. Two different theoretical models are proposed to calculate the diffusion coefficient, each applicable to a distinct range of particle energies. The theoretical results are compared with those from computer simulations, showing good agreement.

physics.space-ph↗

arXiv2012

Intrinsic rotation of toroidally confined magnetohydrodynamics

The spatiotemporal self-organization of viscoresistive magnetohydrodynamics (MHD) in a toroidal geometry is studied. Curl-free toroidal magnetic and electric fields are imposed. It is observed in our simulations that a flow is generated, which evolves from dominantly poloidal to toroidal when the Lundquist numbers are increased. It is shown that this toroidal organization of the flow is consistent with the tendency of the velocity field to align with the magnetic field. Up-down asymmetry of the geometry causes the generation of a non-zero toroidal angular momentum.

physics.plasm-ph↗

arXiv2006

SCUBA-2: a 10,000 pixel submillimeter camera for the James Clerk Maxwell Telescope

SCUBA-2 is an innovative 10,000 pixel submillimeter camera due to be delivered to the James Clerk Maxwell Telescope in late 2006. The camera is expected to revolutionize submillimeter astronomy in terms of the ability to carry out wide-field surveys to unprecedented depths addressing key questions relating to the origins of galaxies, stars and planets. This paper presents an update on the project with particular emphasis on the laboratory commissioning of the instrument. The assembly and integration will be described as well as the measured thermal performance of the instrument. A summary of the performance results will be presented from the TES bolometer arrays, which come complete with in-focal plane SQUID amplifiers and multiplexed readouts, and are cooled to 100mK by a liquid cryogen-free dilution refrigerator. Considerable emphasis has also been placed on the operating modes of the instrument and the common-user aspect of the user interface and data reduction pipeline. These areas will also be described in the paper.

astro-ph↗

arXiv1996

Toroidal Vortices in Resistive Magnetohydrodynamic Equilibria

Resistive steady states in toroidal magnetohydrodynamics (MHD), where Ohm's law must be taken into account, differ considerably from ideal ones. Only for special (and probably unphysical) resistivity profiles can the Lorentz force, in the static force-balance equation, be expressed as the gradient of a scalar and thus cancel the gradient of a scalar pressure. In general, the Lorentz force has a curl directed so as to generate toroidal vorticity. Here, we calculate, for a collisional, highly viscous magnetofluid, the flows that are required for an axisymmetric toroidal steady state, assuming uniform scalar resistivity and viscosity. The flows originate from paired toroidal vortices (in what might be called a ``double smoke ring'' configuration), and are thought likely to be ubiquitous in the interior of toroidally driven magnetofluids of this type. The existence of such vortices is conjectured to characterize magnetofluids beyond the high-viscosity limit in which they are readily calculable.

physics.plasm-ph↗

arXiv1996

Resistive Magnetohydrodynamic Equilibria in a Torus

It was recently demonstrated that static, resistive, magnetohydrodynamic equilibria, in the presence of spatially-uniform electrical conductivity, do not exist in a torus under a standard set of assumed symmetries and boundary conditions. The difficulty, which goes away in the ``periodic straight cylinder approximation,'' is associated with the necessarily non-vanishing character of the curl of the Lorentz force, j x B. Here, we ask if there exists a spatial profile of electrical conductivity that permits the existence of zero-flow, axisymmetric r esistive equilibria in a torus, and answer the question in the affirmative. However, the physical properties of the conductivity profile are unusual (the conductivity cannot be constant on a magnetic surface, for example) and whether such equilibria are to be considered physically possible remains an open question.

physics.plasm-ph↗