arXiv subjects

David O. Scanlon

Publications and source records attributed to David O. Scanlon.

28 records · Page 2Linked to original sources

arXiv2020

Solvent Engineered Synthesis of Layered SnO Nanoparticles for High-Performance Anodes

Batteries are the most abundant form of electrochemical energy storage. Lithium and sodium ion batteries account for a significant portion of the battery market, but high-performance electrochemically active materials still need to be discovered and optimized for these technologies. Recently, tin(II) oxide (SnO) has emerged as a highly-promising battery electrode. In this work, we present a facile synthesis method to produce SnO nanoparticles whose size and shape can be tailored by changing the solvent nature. We study the complex relationship between wet chemistry synthesis conditions and resulting layered nanoparticle morphology. Furthermore, high-level electronic structure theory, including dispersion corrections to account for van der Waals forces, are employed to enhance our understanding of the underlying chemical mechanisms. The electronic vacuum alignment and surface energies are determined, allowing the prediction of the thermodynamically-favoured crystal shape (Wulff construction) and surface-weighted work function. Finally, the synthesized nanomaterials were tested as Li-ion battery anodes, demonstrating significantly enhanced electrochemical performance for morphologies obtained from specific synthesis conditions.

cond-mat.mtrl-sci↗

arXiv2020

Experimental and first-principles spectroscopy of Cu$_2$SrSnS$_4$ and Cu$_2$BaSnS$_4$ photoabsorbers

The Cu$_2$BaSnS$_4$ (CBTS) and Cu$_2$SrSnS$_4$ (CSTS) semiconductors have been recently proposed as potential wide band gap photovoltaic absorbers. Although several measurements indicate that they are less affected by band tailing than their parent compound Cu$_2$ZnSnS$_4$, their photovoltaic efficiencies are still low. To identify possible issues, we characterize CBTS and CSTS in parallel by a variety of spectroscopic methods complemented by first-principles calculations. Two main problems are identified in both materials. The first is the existence of deep defect transitions in low-temperature photoluminescence, pointing to a high density of bulk recombination centers. The second is a low electron affinity, which emphasizes the need for an alternative heterojunction partner and electron contact. We also find a tendency for downward band bending at the surface of both materials. In CBTS, this effect is sufficiently large to cause carrier type inversion, which may enhance carrier separation and mitigate interface recombination. Optical absorption at room temperature is exciton-enhanced in both CBTS and CSTS. Deconvolution of excitonic effects yields band gaps that are about 100 meV higher than previous estimates based on Tauc plots. Although the two investigated materials are remarkably similar in an idealized, defect-free picture, the present work points to CBTS as a more promising absorber than CSTS for tandem photovoltaics.

physics.app-ph↗

arXiv2020

Perovskite-Inspired Materials for Photovoltaics -- From Design to Devices

Lead-halide perovskites have demonstrated astonishing increases in power conversion efficiency in photovoltaics over the last decade. The most efficient perovskite devices now outperform industry-standard multi-crystalline silicon solar cells, despite the fact that perovskites are typically grown at low temperature using simple solution-based methods. However, the toxicity of lead and its ready solubility in water are concerns for widespread implementation. These challenges, alongside the many successes of the perovskites, have motivated significant efforts across multiple disciplines to find lead-free and stable alternatives which could mimic the ability of the perovskites to achieve high performance with low temperature, facile fabrication methods. This Review discusses the computational and experimental approaches that have been taken to discover lead-free perovskite-inspired materials, and the recent successes and challenges in synthesizing these compounds. The atomistic origins of the extraordinary performance exhibited by lead-halide perovskites in photovoltaic devices is discussed, alongside the key challenges in engineering such high-performance in alternative, next-generation materials. Beyond photovoltaics, this Review discusses the impact perovskite-inspired materials have had in spurring efforts to apply new materials in other optoelectronic applications, namely light-emitting diodes, photocatalysts, radiation detectors, thin film transistors and memristors. Finally, the prospects and key challenges faced by the field in advancing the development of perovskite-inspired materials towards realization in commercial devices is discussed.

physics.app-ph↗

arXiv2020

Bandgap Lowering in Mixed Alloys of Cs2Ag(SbxBi1-x)Br6 Double Perovskite Thin Films

Halide double perovskites have gained significant attention, owing to their composition of low-toxicity elements, stability in air and long charge-carrier lifetimes. However, most double perovskites, including Cs2AgBiBr6, have wide bandgaps, which limit photo conversion efficiencies. The bandgap can be reduced through hallowing with Sb3+, but Sb-rich alloys are difficult to synthesise due to the high formation energy of Cs2AgSbBr6, which itself has a wide bandgap. We develop a solution-based route to synthesis phase-pure Cs2Ag(SbxBi1-x)Br6 thin films, with the mixing parameter x continuous varying over the entire composition range. We reveal that the mixed alloys (x between 0.5 and 0.9) demonstrate smaller bandgaps (as low as 2.08 eV) than the pure Sb- (2.18 eV) and Bi-based (2.25 eV) compounds, with strong deviation from Vegard's law. Through in-depth computations, we propose that bandgap lowering arises from the Type II band alignment between Cs2AgBiBr6 and Cs2AgSbBr6. The energy mismatch between the Bi and Sb s and p atomic orbitals, coupled with their non-linear mixing, results in the alloys adopting a smaller bandgap than the pure compounds. Our work demonstrates an approach to achieve bandgap reduction and highlights that bandgap bowing may be found in other double perovskite alloys by pairing together materials forming a Type II band alignment.

cond-mat.mtrl-sci↗

arXiv2019

The electronic band structure and optical properties of boron arsenide

We compute the electronic band structure and optical properties of boron arsenide using the relativistic quasiparticle self-consistent $GW$ approach, including electron-hole interactions through solution of the Bethe-Salpeter equation. We also calculate its electronic and optical properties using standard and hybrid density functional theory. We demonstrate that the inclusion of self-consistency and vertex corrections provides substantial improvement in the calculated band features, in particular when comparing our results to previous calculations using the single-shot $GW$ approach and various DFT methods, from which a considerable scatter in the calculated indirect and direct band gaps has been observed. We find that BAs has an indirect gap of 1.674 eV and a direct gap of 3.990 eV, consistent with experiment and other comparable computational studies. Hybrid DFT reproduces the indirect gap well, but provides less accurate values for other band features, including spin-orbit splittings. Our computed Born effective charges and dielectric constants confirm the unusually covalent bonding characteristics of this III-V system.

cond-mat.mtrl-sci↗

arXiv2019

Donor and Acceptor Characteristics of Native Point Defects in GaN

The semiconducting behaviour and optoelectronic response of gallium nitride is governed by point defect processes, which, despite many years of research, remain poorly understood. The key difficulty in the description of the dominant charged defects is determining a consistent position of the corresponding defect levels, which is difficult to derive using standard supercell calculations. In a complementary approach, we take advantage of the embedded cluster methodology that provides direct access to a common zero of the electrostatic potential for all point defects in all charge states. Charged defects polarise a host dielectric material with long-range forces that strongly affect the outcome of defect simulations; to account for the polarisation we couple embedding with the hybrid quantum mechanical/molecular mechanical (QM/MM) approach and investigate the structure, formation and ionisation energies, and equilibrium concentrations of native point defects in wurtzite GaN at a chemically accurate hybrid-density-functional-theory level. N vacancies are the most thermodynamically favourable native defects in GaN, which contribute to the n-type character of as-grown GaN but are not the main source, a result that is consistent with experiment. Our calculations show no native point defects can form thermodynamically stable acceptor states. GaN can be easily doped n-type, but, in equilibrium conditions at moderate temperatures acceptor dopants will be compensated by N vacancies and no significant hole concentrations will be observed, indicating non-equilibrium processes must dominate in p-type GaN. We identify spectroscopic signatures of native defects in the infrared, visible and ultraviolet luminescence ranges and complementary spectroscopies. Crucially, we calculate the effective-mass-like-state levels associated with electrons and holes bound in diffuse orbitals...

cond-mat.mtrl-sci↗

arXiv2018

The role of spin-orbit coupling in the electronic structure of IrO$_2$

The delicate interplay of electronic charge, spin, and orbital degrees of freedom is in the heart of many novel phenomena across the transition metal oxide family. Here, by combining high- resolution angle resolved photoemission spectroscopy and first principles calculations (with and without spin-orbit coupling), the electronic structure of the rutile binary iridate, IrO$_2$ is investigated. The detailed study of electronic bands measured on a high-quality single crystalline sample, and use of a wide range of photon energy provide a huge improvement over the previous studies. The excellent agreement between theory and experimental results shows that the single-particle DFT description of IrO$_2$ band structure is adequate, without the need of invoking any treatment of correlation effects. Although many observed features point to a 3D nature of the electronic structure, clear surface effects are revealed. The discussion of the orbital character of the relevant bands crossing the Fermi level sheds light on spin orbit coupling-driven phenomena in this material, unveiling a spin-orbit induced avoided crossing, a property likely to play key role in its large spin Hall effect.

cond-mat.mtrl-sci↗

arXiv2017

Local corrugation and persistent charge density wave in ZrTe3 with Ni intercalation

The mechanism of emergent bulk superconductivity in transition metal intercalated ZrTe3 is investigated by studying the effect of Ni doping on the band structure and charge density wave (CDW). The study reports theoretical and experimental results in the range of Ni0.01ZrTe3 to Ni0.05ZrTe3. In the highest doped samples bulk superconductivity with Tc < TCDW is observed, while TCDW is strongly reduced. Relativistic ab-initio calculations reveal Ni incorporation occurs preferentially through intercalation in the van-der-Waals gap. Analysis of the structural and elec- tronic effects of intercalation, indicate buckling of the Te-sheets adjacent to the Ni site akin to a locally stabilised CDW-like lattice distortion. Experiments by low temperature x-ray diffraction, angle-resolved-photoemission spectroscopy (ARPES) as well as temperature dependent resistivity reveal the nearly unchanged persistence of the CDW into the regime of bulk superconductivity. The CDW gap is found to be unchanged in its extent in momentum space, with the gap size also unchanged or possibly slightly reduced on Ni intercalation. Both experimental observations suggest that superconductivity coexists with the CDW in NixZrTe3.

cond-mat.supr-con↗

arXiv2017

Electron counting in solids: oxidation states, partial charges and ionicity

In this short viewpoint, we discuss the assignment of ionic charges in solids. We argue that formal oxidation states serve a useful function, and that absolute values of partial charges should be interpreted and applied with caution; the charge assigned can never be definitive and depends on the type of property studied and the type of analysis performed. Careful analysis can be used to avoid unphysical conclusions such as a recent report on the Ti(III) nature of Ti in stoichiometric TiO$_2$.

cond-mat.mtrl-sci↗

arXiv2014

Self-regulation mechanism for charged point defects in hybrid halide perovskites

Hybrid halide perovskites such as methylammonium lead iodide (CH3NH3PbI3) exhibit unusually low free carrier concentrations despite being processed at low-temperatures from solution. We demonstrate, through quantum mechanical calculations, that the origin of this phenomenon is a prevalence of ionic over electronic disorder in stoichiometric materials. Schottky defect formation provides a mechanism to self-regulate the concentration of charge carriers through ionic compensation of charged point defects. The equilibrium charged vacancy concentration is predicted to exceed 0.4% at room temperature. This behaviour, which goes against established defect conventions for inorganic semiconductors, has implications for photovoltaic performance.

cond-mat.mtrl-sci↗