Searcharxiv⌕ Search

arXiv subjects

David Yang

Publications and source records attributed to David Yang.

48 records · Page 3Linked to original sources

Multimodal Fusion Refiner Networks

Tasks that rely on multi-modal information typically include a fusion module that combines information from different modalities. In this work, we develop a Refiner Fusion Network (ReFNet) that enables fusion modules to combine strong unimodal representation with strong multimodal representations. ReFNet combines the fusion network with a decoding/defusing module, which imposes a modality-centric responsibility condition. This approach addresses a big gap in existing multimodal fusion frameworks by ensuring that both unimodal and fused representations are strongly encoded in the latent fusion space. We demonstrate that the Refiner Fusion Network can improve upon performance of powerful baseline fusion modules such as multimodal transformers. The refiner network enables inducing graphical representations of the fused embeddings in the latent space, which we prove under certain conditions and is supported by strong empirical results in the numerical experiments. These graph structures are further strengthened by combining the ReFNet with a Multi-Similarity contrastive loss function. The modular nature of Refiner Fusion Network lends itself to be combined with different fusion architectures easily, and in addition, the refiner step can be applied for pre-training on unlabeled datasets, thus leveraging unsupervised data towards improving performance. We demonstrate the power of Refiner Fusion Networks on three datasets, and further show that they can maintain performance with only a small fraction of labeled data.

cs.CV↗

Mapping data between sample and detector conjugated spaces in Bragg coherent diffraction imaging

Bragg coherent X-ray diffraction imaging (BCDI) is a non-destructive, lensless method for 3D-resolved, nanoscale strain imaging in micro-crystals. A challenge, particularly for new users of the technique, is accurate mapping of experimental data, collected in the detector reciprocal space coordinate frame, to more convenient orthogonal coordinates, e.g. attached to the sample. This is particularly the case since different coordinate conventions are used at every BCDI beamline. The reconstruction algorithms and mapping scripts composed for individual beamlines are not readily interchangeable. To overcome this, a BCDI experiment simulation with a plugin script that converts all beamline angles to a universal, right-handed coordinate frame is introduced, making it possible to condense any beamline geometry into three rotation matrices. The simulation translates a user-specified 3D complex object to different BCDI-related coordinate frames. It also allows the generation of synthetic coherent diffraction data that can be inserted into any BCDI reconstruction algorithm to reconstruct the original user-specified object. Scripts are provided to map from sample space to detector conjugated space, detector conjugated space to sample space and detector conjugated space to detector conjugated space for a different reflection. This provides the reader with the basis for a flexible simulation tool kit that is easily adapted to different geometries. It is anticipated that this will find use in the generation of tailor-made supports for phasing of challenging data and exploration of novel geometries or data collection modalities.

cond-mat.mtrl-sci↗

Annealing of focused ion beam damage in gold microcrystals: An in situ Bragg coherent X-ray diffraction imaging study

Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain, however these protocols need to be evaluated for their effectiveness. Here we use non-destructive Bragg coherent X-ray diffraction imaging to study the in situ annealing of FIB-milled gold microcrystals. We simultaneously measure two non-collinear reflections for two different crystals during a single annealing cycle, demonstrating the ability to reliably track the location of multiple Bragg peaks during thermal annealing. The thermal lattice expansion of each crystal is used to calculate the local temperature. This is compared to thermocouple readings, which are shown to be substantially affected by thermal resistance. To evaluate the annealing process, we analyse each reflection by considering facet area evolution, cross-correlation maps of displacement field and binarised morphology, and average strain plots. The crystal's strain and morphology evolve with increasing temperature, which is likely to be caused by the diffusion of gallium in gold below ~280°C and the self-diffusion of gold above ~280°C. The majority of FIB-induced strains are removed by 380-410\degree C, depending on which reflection is being considered. Our observations highlight the importance of measuring multiple reflections to unambiguously interpret material behaviour.

cond-mat.mtrl-sci↗

Robust Deep Learning with Active Noise Cancellation for Spatial Computing

This paper proposes CANC, a Co-teaching Active Noise Cancellation method, applied in spatial computing to address deep learning trained with extreme noisy labels. Deep learning algorithms have been successful in spatial computing for land or building footprint recognition. However a lot of noise exists in ground truth labels due to how labels are collected in spatial computing and satellite imagery. Existing methods to deal with extreme label noise conduct clean sample selection and do not utilize the remaining samples. Such techniques can be wasteful due to the cost of data retrieval. Our proposed CANC algorithm not only conserves high-cost training samples but also provides active label correction to better improve robust deep learning with extreme noisy labels. We demonstrate the effectiveness of CANC for building footprint recognition for spatial computing.

cs.LG↗

In-The-Wild Interference Characterization and Modelling for Electro-Quasistatic-HBC with Miniaturized Wearables

The emergence of Human Body Communication (HBC) as an alternative to wireless body area networks (WBAN) has led to the development of small sized, energy efficient and more secure wearable and implantable devices forming a network in and around the body. Previous studies claim that though HBC is comparatively more secure than WBAN, nevertheless, the electromagnetic (EM) radiative nature of HBC in >10MHz region makes the information susceptible to eavesdropping. Furthermore, interferences may be picked up by the body due to the human body antenna effect in the 40-400MHz range. Alternatively, electro-quasistatic (EQS) mode of HBC forms an attractive way for covert data transmission in the sub 10MHz region by allowing the signal to be contained within the body. However, there is a gap in the knowledge about the mechanism and sources of interference in this region (crucial in allowing for proper choice of data transmission band). In this paper, the interference coupling modality in the EQS region is explained along with its possible sources. Interferences seen by the wearable in the actual scenario is a non-trivial problem and a suitable measurement EQS HBC setup is designed to recreate it by employing a wearable sized measurement setup having a small ground plane. For the first time, a human biophysical interference pickup model is proposed and interference measurement results using a wearable device are presented up to 250kHz in different environmental settings.

eess.SY↗

Advanced Biophysical Model to Capture Channel Variability for EQS Capacitive HBC

Human Body Communication (HBC) has come up as a promising alternative to traditional radio frequency (RF) Wireless Body Area Network (WBAN) technologies. This is essentially due to HBC providing a broadband communication channel with enhanced signal security in the physical layer due to lower radiation from the human body as compared to its RF counterparts. An in-depth understanding of the mechanism for the channel loss variability and associated biophysical model needs to be developed before EQS-HBC can be used more frequently in WBAN consumer and medical applications. Biophysical models characterizing the human body as a communication channel didn't exist in literature for a long time. Recent developments have shown models that capture the channel response for fixed transmitter and receiver positions on the human body. These biophysical models do not capture the variability in the HBC channel for varying positions of the devices with respect to the human body. In this study, we provide a detailed analysis of the change in path loss in a capacitive-HBC channel in the electroquasistatic (EQS) domain. Causes of channel loss variability namely: inter-device coupling and effects of fringe fields due to body's shadowing effects are investigated. FEM based simulation results are used to analyze the channel response of human body for different positions and sizes of the device which are further verified using measurement results to validate the developed biophysical model. Using the bio-physical model, we develop a closed form equation for the path loss in a capacitive HBC channel which is then analyzed as a function of the geometric properties of the device and the position with respect to the human body which will help pave the path towards future EQSHBC WBAN design.

eess.SP↗

Observation of transient and asymptotic driven structural states of tungsten exposed to irradiation

Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~0.1 dpa, collapsing into a driven quasi-steady structural state above ~1 dpa. The driven asymptotic state is characterized by finely dispersed vacancy defects coexisting with an extended dislocation network, and exhibits positive volumetric swelling due to the creation of new crystallographic planes through self-interstitial coalescence, but negative lattice strain.

cond-mat.mtrl-sci↗

Applications of a grassmannian technique in hypersurfaces

In this paper we further develop a Grassmannian technique used to prove results about very general hypersurfaces and present three applications. First, we provide a short proof of the Kobayashi Conjecture given previous results on the Green-Griffiths-Lang Conjecture. Second, we characterize the dimension of the space of Chow-equivalent points on a very general hypersurface, proving the remaining cases of a conjecture of Chen, Lewis and Sheng and providing a short, alternate proof for many of the already known cases. Finally, we relate Seshadri constants of very general points to Seshadri constants of arbitrary points of very general hypersurfaces.

math.AG↗

Kontsevich spaces of rational curves on Fano hypersurfaces

We investigate the spaces of rational curves on a general hypersurface. In particular, we show that for a general degree $d$ hypersurface in $\mathbb{P}^n$ with $n \geq d+2$, the space $\overline{\mathcal{M}_{0,0}}(X,e)$ of degree $e$ Kontsevich stable maps from a rational curve to $X$ is an irreducible local complete intersection stack of dimension $e(n-d+1)+n-4$.

math.AG↗

A vanishing theorem for weight one syzygies

Inspired by the methods of Voisin, the first two authors recently proved that one could read off the gonality of a curve C from the syzygies of its ideal in any one embedding of sufficiently large degree. This was deduced from from a vanishing theorem for the asymptotic syzygies associated to an arbitrary line bundle B on C. The present paper extends this vanishing theorem to a smooth projective variety X of arbitrary dimension. Specifically, given a line bundle B on X, we prove that if B is p-jet very ample (i.e. the sections of B separate jets of total weight p+1) then the weight one Koszul cohomology group K_{p,1}(X, B; L) vanishes for all sufficiently positive L. In the other direction, we show that if there is a reduced cycle of length p+1 that fails to impose independent conditions on sections of B, then the Koszul group in question is non-zero for very positive L.

math.AG↗

Interpolation for normal bundles of general curves

Given n general points p_1, p_2,..., p_n in P^r, it is natural to ask when there exists a curve C \subset P^r, of degree d and genus g, passing through p_1, p_2,..., p_n. In this paper, we give a complete answer to this question for curves C with nonspecial hyperplane section. This result is a consequence of our main theorem, which states that the normal bundle N_C of a general nonspecial curve of degree d and genus g in P^r (with d >= g + r) has the property of interpolation (i.e. that for a general effective divisor D of any degree on C, either H^0(N_C(-D)) = 0 or H^1(N_C(-D)) = 0), with exactly three exceptions.

math.AG↗

Rational curves on general type hypersurfaces

We develop a technique that allows us to prove results about subvarieties of general type hypersurfaces. As an application, we use a result of Clemens and Ran to prove that a very general hypersurface of degree (3n+1)/2 \leq d \leq 2n-3 contains lines but no other rational curves.

math.AG↗