arXiv subjects

Davide Calonico

Publications and source records attributed to Davide Calonico.

At least 19 recordsLinked to original sources

arXiv2026

Spectral evolution of two-photon emission in microresonators

High-Q silicon nitride microresonators are versatile sources for generating photon pairs via four-wave mixing. We investigate the spectral coherence of this process, tracking the transition from the spontaneous quantum regime to the onset of optical parametric oscillation. By combining time-correlation measurements with phase-sensitive measurements, we continuously monitor the emission linewidth as it evolves from a cavity-lifetime-limited linewidth toward the pump-linewidth scale. This characterization is essential for optimizing integrated sources for scalable quantum networks.

quant-ph↗

arXiv2026

International Optical Clock Comparison Using the European Optical Fiber Network

Optical clocks have achieved remarkable estimated fractional frequency uncertainties reaching the $10^{-18}$ level and below, enabling applications in fundamental physics, general relativity, and geodesy. However, the challenge of verifying the international consistency of optical clocks remains critical as efforts intensify toward redefining the SI second based on an optical transition or transitions. We report on a two-month international clock comparison campaign involving seven optical clocks in four national metrology institutes (INRIM, LNE-OP, NPL, and PTB) connected via the optical fiber network established in Europe. The campaign resulted in optical frequency ratios with uncertainties ranging from $7.7\times10^{-18}$ to $6.1\times10^{-17}$. Among the results, the $^{171}$Yb$^+$(E3) clocks at NPL and PTB demonstrated agreement within an uncertainty of $7.7\times10^{-18}$, marking the first international verification of two independently developed optical clocks below one part in $10^{17}$. The operation of the $^{199}$Hg clock at LNE-OP (formerly LNE-SYRTE) resulted in frequency ratios with improved uncertainties with $^{171}$Yb$^+$(E3), $^{171}$Yb, and $^{87}$Sr optical clocks. These results provide input for the redefinition of the second and underscore how fiber-linked clock networks can advance metrology and scientific applications.

physics.atom-ph↗

arXiv2026

Lagrange: Operating Italy's First Publicly-Accessible Quantum Computer for Research and Education

We describe the design, implementation, and nine-month operational experience of the software management stack for Lagrange, an IQM Spark five-qubit superconducting quantum computer jointly acquired by LINKS Foundation, Politecnico di Torino and the Italian National Institute of Metrological Research (INRiM), and managed by LINKS. Lagrange is, to our knowledge, the first quantum computer in Italy that is fully operational and accessible to students and researchers from multiple institutions under formal service agreements, and to the general public under commercial agreements. When installed in mid-2025, the IQM Spark hardware was delivered by the vendor with authentication only: no billing, project management or fair usage enforcement were provided. We developed a modular middleware layer that filled that gap without modifying any vendor client software, by intercepting API calls through a proxy that enforces project-based budgets, reservation-aware authorisation, and per-user fairness policies. The middleware adopts a plugin architecture that cleanly separates vendor-specific logic from site-specific policies, enabling reuse across different quantum hardware backends and deployment contexts. Since entering production in September 2025, the system has processed over 240,000 quantum jobs totalling more than 1 week of QPU execution time, with greater than 98% uptime. Notably, students at Politecnico di Torino regularly use the machine during both lectures and formal examinations -- a practice we believe to be unique in Europe. We report on the system architecture, the operational lessons learned, and the infrastructure choices that made this deployment possible.

quant-ph↗

arXiv2026

A High-frequency Geodetic VLBI Experiment for Optical Clock Comparison

An intercontinental metrological clock comparison between Italy and the Republic of Korea was performed by means of geodetic K-band VLBI observations. The comparison involved the hydrogen masers (H-masers) used at Medicina and Sejong radio telescopes. The same clocks were simultaneously compared by a satellite link and by high-precision optical clocks maintained at the National Metrology Institutes, KRISS in Korea and INRIM in Italy, and delivered to VLBI antennas via optical fiber. The H-masers frequency difference was estimated by extrapolating the clock rate from VLBI data using two geodetic VLBI software. This was subsequently compared with clock differences derived by satellite link and by local optical clocks. Results obtained with different approaches were in agreement at the level of $10^{-15}$ s/s. This pilot study demonstrates that standard high-frequency (K-band) geodetic VLBI campaigns could be a viable approach to conduct intercontinental clock comparisons, now only possible via satellite links. This uncertainty can be reduced thanks to the planned installation of new-generation, broadband, high-frequency receivers on the involved telescopes. K/Q/W-band geodetic observations will allow an improvement of the accuracy of the resulting group delays through broad bandwidth synthesis from 20 to 100 GHz. Furthermore, the Frequency Phase Transfer (FPT) method will also be explored together with the use of PCAL systems installed at the radio telescopes to improve phase stability and thus allow a better estimation of the station clock parameters.

astro-ph.IM↗

arXiv2025

Atomic thermometry in optical lattice clocks

Accurate measurement of atomic temperature is fundamental for a wide range of applications, from quantum sensing to precision metrology. In optical lattice clocks, precise characterization of atomic temperature is required to minimize systematic uncertainties at the $10^{-18}$ level. In this work, we investigate atomic temperature measurements in the ytterbium optical lattice clock developed at INRIM, IT-Yb1, employing sideband and Doppler spectroscopy across a wide range of trapping conditions. By implementing clock-line-mediated Sisyphus cooling [Phys. Rev. Lett. 133, 053401 (2024)], we reduce the atomic temperature and enable operation at shallower lattice depths down to $D = 50E_{R}$. We compare temperature estimates obtained from the harmonic oscillator model with those derived using a Born-Oppenheimer-based approach [Phys. Rev. A 101, 053416 (2020)], which is expected to provide a more accurate description of atomic motion in both longitudinal and radial directions, especially for hotter atoms whose motion deviates from the harmonic regime. Discrepancies up to a factor of two in extracted temperatures are observed depending on the chosen model. We assess the impact of these modeling differences on the evaluation of lattice shifts and find relative frequency deviations up to $8\times10^{-17}$. Even though extended Sisyphus cooling reduces these inconsistencies to the $1\times10^{-18}$ level, residual biases may still limit the accuracy of optical lattice clocks.

physics.atom-ph↗

arXiv2025

Coordinated international comparisons between optical clocks connected via fiber and satellite links

Optical clocks provide ultra-precise frequency references that are vital for international metrology as well as for tests of fundamental physics. To investigate the level of agreement between different clocks, we simultaneously measured the frequency ratios between ten optical clocks in six different countries, using fiber and satellite links. This is the largest coordinated comparison to date, from which we present a subset of 38 optical frequency ratios and an evaluation of the correlations between them. Four ratios were measured directly for the first time, while others had significantly lower uncertainties than previously achieved, supporting the advance towards a redefinition of the second and the use of optical standards for international time scales.

physics.atom-ph↗

arXiv2024

QKD protected fiber-based infrastructure for time dissemination

In this study, we demonstrate the possibility to protect, with Quantum Key Distribution (QKD), a critical infrastructure as the fiber-based one used for time and frequency (TF) dissemination service. The proposed technique allows to disseminate secure and precise TF signals between two fiber-opticconnected locations, on a critical infrastructure, using both QKD and White Rabbit technique. This secure exchange allows the secret sharing of time information between two parties for the synchronization of distant clocks with the highest stability and traceable to the Italian time scale. When encrypted, time signals would reveal to a third party no useful information about the synchronization status, providing a time stability two orders of magnitude worsened.

quant-ph↗

arXiv2023

Phase Noise in Real-World Twin-Field Quantum Key Distribution

The impact of noise sources in real-world implementations of Twin-Field Quantum Key Distribution (TF-QKD) protocols is investigated, focusing on phase noise from photon sources and connecting fibers. This work emphasizes the role of laser quality, network topology, fiber length, arm balance, and detector performance in determining key rates. Remarkably, it reveals that the leading TF-QKD protocols are similarly affected by phase noise despite different mechanisms. This study demonstrates duty cycle improvements of over a factor of two through narrow-linewidth lasers and phase-control techniques, highlighting the potential synergy with high-precision time/frequency distribution services. Ultrastable lasers, evolving toward integration and miniaturization, offer promise for agile TF-QKD implementations on existing networks. Properly addressing phase noise and practical constraints allows for consistent key rate predictions, protocol selection, and layout design, crucial for establishing secure long-haul links for the Quantum Communication Infrastructures under development in several countries.

quant-ph↗

arXiv2023

Seismic monitoring using the telecom fiber network

Laser interferometry enables to remotely measure microscopical length changes of deployed telecommunication cables originating from earthquakes. Long range and compatibility with data traffic make it unique to the exploration of remote regions, as well as highly-populated areas where optical networks are pervasive, and its large-scale implementation is attractive for both Earth scientists and telecom operators. However, validation and modeling of its response and sensitivity are still at an early stage and suffer from lack of statistically-significant event catalogs and limited availability of co-located seismometers. We implemented laser interferometry on a land-based telecommunication cable and analyzed 1.5 years of continuous acquisition, with successful detections of events in a broad range of magnitudes, including very weak ones. By comparing fiber and seismometer recordings we determined relations between a cable's detection probability and the magnitude and distance of events, and showed that spectral analysis of recorded data allows considerations on the earthquake dynamics. Our results reveal that quantitative analysis is possible for this sensing technique and support the interpretation of data from the growing amount of interferometric deployments. We anticipate the high integration and scalability of laser interferometry into existing telecommunication grids to be useful for the daily seismicity monitoring, in perspective exploitable for civilian protection use.

physics.geo-ph↗

arXiv2023

Embedded digital phase noise analyzer for optical frequency metrology

Digital signal processing (DSP) is supporting novel in-field applications of optical interferometry, such as in laser ranging and distributed acoustic sensing. While the highest performances are achieved with field-programmable gated arrays (FPGAs), their complexity and cost are often too high for many tasks. Here, we describe an alternative solution for processing optical signals in real-time, based on a dual-core 32-bit microcontroller. We implemented in-phase and quadrature (IQ) demodulation of optical beat-notes resulting from the interference of independent laser sources, phase noise analysis of deployed optical fibers covering intercity distances, and synchronization of remote acquisitions via optical trigger signals. The embedded architecture can efficiently accomplish a large variety of tasks in the context of optical signal processing, being also easily configurable, compact, and upgradable. These features make it attractive for applications that require long-term, remotely operated, and field-deployed instrumentation.

eess.SP↗

arXiv2022

Absolute frequency measurement of a Yb optical clock at the limit of the Cs fountain

We present the new absolute frequency measurement of ytterbium (171Yb) obtained at INRiM with the optical lattice clock IT-Yb1 against the cryogenic caesium (133Cs) fountain IT-CsF2, evaluated through a measurement campaign that lasted 14 months. Measurements are performed by either using a hydrogen maser as a transfer oscillator or by synthesizing a low-noise microwave for Cs interrogation using an optical frequency comb. The frequency of the 171Yb unperturbed clock transition 1S0 - 3P0 results to be 518 295 836 590 863.44(14) Hz, with a total fractional uncertainty of 2.7e-16 that is limited by the uncertainty of IT-CsF2. Our measurement is in agreement with the Yb frequency recommended by the Consultative Committee for Time and Frequency (CCTF). This result confirms the reliability of Yb as a secondary representation of the second and is relevant to the process of redefining the second in the International System of Units (SI) on an optical transition

physics.atom-ph↗

arXiv2022

Frequency stability and phase noise measurements of a 5,860 km-long intercontinental seafloor optical fibre cable

Optical clock comparison via optical fibre links has been achieved over continental scales, but has not yet been demonstrated intercontinentally. The transfer of ultra-stable optical frequencies over transoceanic distances is a challenging task, as the seafloor cable architecture prevents the use of environmental noise suppression techniques currently employed on land-based metrological links. As a fundamental first step towards devising suitable frequency transfer techniques to enable future clock comparison on a global scale, here we show the free-running frequency stability and phase noise measurements of a transatlantic seafloor optical link between the UK and Canada. To the best of our knowledge, these are the first ever measurements of an intercontinental optical fibre link.

physics.ins-det↗

arXiv2022

Improving the resolution of comb-based frequency measurements using a track and hold amplifier

The advent of optical frequency standards with ultimate uncertainties in the low 1x10$^{-18}$ requires femtosecond frequency combs to support a similar level of resolution in the spectral transfer and the computation of optical frequency ratios. The related experimental challenges grow together with the number of optical frequencies to be measured simultaneously, as in many cases the comb's optical power does not allow reliable beatnote counting or tracking in all the spectral regions of interest. Here we describe the use of a track-and-hold amplifier to implement the gated detection, a previously proposed technique for improving the signal-to-noise ratio of the beatnote between a low-power tooth of the frequency comb and a continuous wave laser. We demonstrate a 12dB improvement in the signal-to-noise ratio of beatnotes involving a broadband-spanning optical comb as compared to traditional detection schemes. Our approach enables reliable and cycle-slip-free spectral purity transfer and reduces the system sensitivity to power drops in the comb spectrum. Being based on a single chip, it is robust, versatile and easily embedded in more complex experimental schemes. Keywords: frequency comb, spectral purity transfer, gated detection, track and hold amplifier.

physics.ins-det↗

arXiv2022

Optically loaded Strontium lattice clock with a single multi-wavelength reference cavity

We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are stabilized to a zero-thermal expansion high-finesse optical resonator and can be operated without frequency adjustments for weeks. We present the complete characterization of the apparatus. Optical control of the atomic source allows us to perform low-noise clock operation without atomic signal normalization. Long- and short-term stability tests of the clock have been performed for the 88 Sr bosonic isotope by means of interleaved clock operation. Finally, we present the first preliminary accuracy budget of the system.

physics.atom-ph↗

arXiv2022

Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map

We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies.

astro-ph.IM↗

arXiv2021

Towards fully-fledged quantum and classical communication over deployed fiber with up-conversion module

Quantum key distribution (QKD), the distribution of quantum secured keys useful for data encryption, is expected to have a crucial impact in the next decades. However, although the notable achievements accomplished in the last twenty years, many practical and serious challenges are limiting the full deployment of this novel quantum technology in the current telecommunication infrastructures. In particular, the co-propagation of quantum signals and high-speed data traffic within the same optical fiber, is not completely resolved, due to the intrinsic noise caused by the high intensity of the classical signals. As a consequence, current co-propagation schemes limit the amount of classical optical power in order to reduce the overall link noise. However, this ad-hoc solution restrains the overall range of possibilities for a large-scale QKD deployment. Here, we propose and demonstrate a new method, based on up-conversion assisted receiver, for co-propagating classical light and QKD signals. In addition, we compare the performances of this scheme with an off-the-shelf quantum receiver, equipped with a standard InGaAs detector, over different lengths of an installed fiber link. Our proposal exhibits higher tolerance for noise in comparison to the standard receiver, thus enabling the distribution of secret keys in the condition of 4 dB-higher classical power.

quant-ph↗

arXiv2021

SI-traceable frequency dissemination at 1572.06 nm in a stabilized fiber network with ring topology

Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optical frequency in the L-band over a 456 km fiber network with ring topology, in which telecommunication data traffic occupies the full C-band. We characterize the optical phase noise and evaluate a link instability of $4.7\cdot 10^{-16}$ at 1 s and $3.8\cdot 10^{-19}$ at 2000 s integration time, and a link accuracy of $2\cdot 10^{-18}$, which is comparable to existing metrology networks in the C-band. We demonstrate the application of the disseminated frequency by establishing the SI-traceability of a laser in a remote laboratory. Finally, we show that our metrological frequency does not interfere with data traffic in the telecommunication channels. Our approach combines an unconventional spectral choice in the telecommunication L-band with established frequency-stabilization techniques, providing a novel, cost-effective solution for ultrastable frequency-comparison and dissemination, and may contribute to a foundation of a world-wide metrological network.

physics.ins-det↗

arXiv2020

Coherent phase transfer for real-world twin-field quantum key distribution

Quantum mechanics allows the distribution of intrinsically secure encryption keys by optical means. Twin-field quantum key distribution is the most promising technique for its implementation on long-distance fibers, but requires stabilizing the optical length of the communication channels between parties. In proof-of-principle experiments based on spooled fibers, this was achieved by interleaving the quantum communication with periodical adjustment frames. In this approach, longer duty cycles for the key streaming come at the cost of a looser control of channel length, and a successful key-transfer using this technique in a real world remains a significant challenge. Using interferometry techniques derived from frequency metrology, we developed a solution for the simultaneous key streaming and channel length control, and demonstrate it on a 206 km field-deployed fiber with 65 dB loss. Our technique reduces the quantum-bit-error-rate contributed by channel length variations to <1%, representing an effective solution for real-world quantum communications.

quant-ph↗