arXiv subjects

Davide Ceresoli

Publications and source records attributed to Davide Ceresoli.

33 records · Page 2Linked to original sources

arXiv2016

Quantum mechanical calculation of Rydberg-Rydberg autoionization rates

We present quantum mechanical calculations of Auger decay rates for two Rubidium Rydberg atoms with weakly overlapping electron clouds. We neglect exchange effects and consider tensor products of independent atom states forming an approximate basis of the two-electron state space. We consider large sets of two-atom states with randomly chosen quantum numbers and find that the charge overlap between the two Rydberg electrons allows one to characterise the magnitude of the Auger decay rates. If the electron clouds overlap by more than one percent, the Auger decay rates increase approximately exponentially with the charge overlap. This finding is independent of the energy of the initial state.

physics.atom-ph↗

arXiv2016

Accurate Tight-Binding Hamiltonians for 2D and Layered Materials

We present a scheme to controllably improve the accuracy of tight-binding Hamiltonian matrices derived by projecting the solutions of plane-wave ab initio calculations on atomic orbital basis sets. By systematically increasing the completeness of the basis set of atomic orbitals, we are able to optimize the quality of the band structure interpolation over wide energy ranges including unoccupied states. This methodology is applied to the case of interlayer and image states, which appear several eV above the Fermi level in materials with large interstitial regions or surfaces such as graphite and graphene. Due to their spatial localization in the empty regions inside or outside of the system, these states have been inaccessible to traditional tight-binding models and even to ab initio calculations with atom-centered basis functions.

cond-mat.mtrl-sci↗

arXiv2015

Thermoelastic properties of $α$-iron from first-principles

We calculate the thermomechanical properties of $α$-iron, and in particular its isothermal and adiabatic elastic constants, using first-principles total-energy and lattice-dynamics calculations, minimizing the quasi-harmonic vibrational free energy under finite strain deformations. Particular care is made in the fitting procedure for the static and temperature-dependent contributions to the free energy, in discussing error propagation for the two contributions separately, and in the verification and validation of pseudopotential and all-electron calculations. We find that the zero-temperature mechanical properties are sensitive to the details of the calculation strategy employed, and common semi-local exchange-correlation functionals provide only fair to good agreement with experimental elastic constants, while their temperature dependence is in excellent agreement with experiments in a wide range of temperature almost up to the Curie transition.

cond-mat.mtrl-sci↗

arXiv2015

Subsystem real-time Time Dependent Density Functional Theory

We present the extension of Frozen Density Embedding (FDE) theory to real-time Time Dependent Density Functional Theory (rt-TDDFT). FDE a is DFT-in-DFT embedding method that allows to partition a larger Kohn-Sham system into a set of smaller, coupled Kohn-Sham systems. Additional to the computational advantage, FDE provides physical insight into the properties of embedded systems and the coupling interactions between them. The extension to rt-TDDFT is done straightforwardly by evolving the Kohn-Sham subsystems in time simultaneously, while updating the embedding potential between the systems at every time step. Two main applications are presented: the explicit excitation energy transfer in real time between subsystems is demonstrated for the case of the Na$_4$ cluster and the effect of the embedding on optical spectra of coupled chromophores. In particular, the importance of including the full dynamic response in the embedding potential is demonstrated.

physics.chem-ph↗

arXiv2014

Periodic Subsystem Density-Functional Theory

By partitioning the electron density into subsystem contributions, the Frozen Density Embedding (FDE) formulation of subsystem DFT has recently emerged as a powerful tool for reducing the computational scaling of Kohn--Sham DFT. To date, however, FDE has been employed to molecular systems only. Periodic systems, such as metals, semiconductors, and other crystalline solids have been outside the applicability of FDE, mostly because of the lack of a periodic FDE implementation. To fill this gap, in this work we aim at extening FDE to treat subsystems of molecular and periodic character. This goal is achieved by a dual approach. On one side, the development of a theoretical framework for periodic subsystem DFT. On the other, the realization of the method into a parallel computer code. We find that periodic FDE is capable of reproducing total electron densities and (to a lesser extent) also interaction energies of molecular systems weakly interacting with metallic surfaces. In the pilot calculations considered, we find that FDE fails in those cases where there is appreciable density overlap between the subsystems. Conversely, we find FDE to be in semiquantitative agreement (but still within chemical accuracy) with Kohn--Sham DFT when the inter-subsystem density overlap is low. We also conclude that to make FDE a suitable method for describing molecular adsorption at surfaces, kinetic energy density functionals that go beyond the GGA level must be employed.

cond-mat.mtrl-sci↗

arXiv2014

Electronic transport in BN-substituted bilayer graphene nano-junctions

We investigated a suspended bilayer graphene where the bottom (top) layer is doped by boron (nitrogen) substitutional atoms by using Density Functional Theory (DFT) calculations. We found that at high dopant concentration (one B-N pair every 32 C atoms) the electronic structure of the bilayer does not depend on the B-N distance but on the relative occupation of the bilayer graphene sub-lattices by B and N. We found that a large built in electric field is established between layers, giving rise to an energy gap. We further investigated the transport properties and found that intra-layer electron current is weakly influenced by the presence of these dopants while the inter-layer current is significantly enhanced for biases allowing the energy alignment of N and B states. This effect leads to current rectification in asymmetric junctions.

cond-mat.mtrl-sci↗

arXiv2013

Enhancement of DFT-calculations at Petascale: Nuclear Magnetic Resonance, Hybrid Density Functional Theory and Car-Parrinello calculations

One of the most promising techniques used for studying the electronic properties of materials is based on Density Functional Theory (DFT) approach and its extensions. DFT has been widely applied in traditional solid state physics problems where periodicity and symmetry play a crucial role in reducing the computational workload. With growing compute power capability and the development of improved DFT methods, the range of potential applications is now including other scientific areas such as Chemistry and Biology. However, cross disciplinary combinations of traditional Solid-State Physics, Chemistry and Biology drastically improve the system complexity while reducing the degree of periodicity and symmetry. Large simulation cells containing of hundreds or even thousands of atoms are needed to model these kind of physical systems. The treatment of those systems still remains a computational challenge even with modern supercomputers. In this paper we describe our work to improve the scalability of Quantum ESPRESSO \cite{Quantum-Espresso} for treating very large cells and huge numbers of electrons. To this end we have introduced an extra level of parallelism, over \emph{\emph{electronic bands}}, in three kernels for solving computationally expensive problems: the Sternheimer equation solver (Nuclear Magnetic Resonance, package QE-GIPAW), the Fock operator builder (electronic ground-state, package PWscf) and most of the Car-Parrinello routines (Car-Parrinello dynamics, package CP). Final benchmarks show our success in computing the Nuclear Magnetic Response (NMR) chemical shift of a large biological assembly, the electronic structure of defected amorphous silica with hybrid exchange-correlation functionals and the equilibrium atomic structure of height Porphyrins anchored to a Carbon Nanotube, on many thousands of CPU cores.

cond-mat.mtrl-sci↗

arXiv2012

First Principles NMR Study of Fluorapatite under Pressure

NMR is the technique of election to probe the local properties of materials. Herein we present the results of density functional theory (DFT) \textit{ab initio} calculations of the NMR parameters for fluorapatite (FAp), a calcium orthophosphate mineral belonging to the apatite family, by using the GIPAW method [Pickard and Mauri, 2001]. Understanding the local effects of pressure on apatites is particularly relevant because of their important role in many solid state and biomedical applications. Apatites are open structures, which can undergo complex anisotropic deformations, and the response of NMR can elucidate the microscopic changes induced by an applied pressure. The computed NMR parameters proved to be in good agreement with the available experimental data. The structural evaluation of the material behavior under hydrostatic pressure (from --5 to +100 kbar) indicated a shrinkage of the diameter of the apatitic channel, and a strong correlation between NMR shielding and pressure, proving the sensitivity of this technique to even small changes in the chemical environment around the nuclei. This theoretical approach allows the exploration of all the different nuclei composing the material, thus providing a very useful guidance in the interpretation of experimental results, particularly valuable for the more challenging nuclei such as $^{43}$Ca and $^{17}$O.

cond-mat.mtrl-sci↗

arXiv2012

First-principles investigation of hyperfine interactions for nuclear spin entanglement in photo-excited fullerenes

The study of hyperfine interactions in optically excited fullerenes has recently acquired importance within the context of nuclear spin entanglement for quantum information technology. We here report a first-principles pseudopotential study of the hyperfine coupling parameters of optically excited fullerene derivatives as well as small organic radicals. The calculations are performed within the gauge-invariant projector-augmented wave method [C. Pickard and F. Mauri, Phys. Rev. B. 63, 245101 (2001)]. In order to establish the accuracy of this methodology we compare our results with all-electron calculations and with experiment. In the case of fullerene derivatives we study the hyperfine coupling in the spin-triplet exciton state and compare our calculations with recent electron paramagnetic resonance measurements [M. Schaffry et al., Phys. Rev. Lett. 104, 200501 (2010)]. We discuss our results in light of a recent proposal for entangling remote nuclear spins in photo-excited chromophores.

quant-ph↗

arXiv2010

First-principles theory of the orbital magnetization

We compute the orbital magnetization in real materials by evaluating a recently discovered formula for periodic systems, within density functional theory. We obtain improved values of the orbital magnetization in the ferromagnetic metals Fe, Co, and Ni, by taking into account the contribution of the interstitial regions neglected so far in literature. We also use the orbital magnetization to compute the EPR $g$-tensor in molecules and solids. The present approach reproduces the $g$-tensor obtained by linear response (LR), when the spin-orbit can be treated as a perturbation. However, it can also be applied to radicals and defects with an orbital-degenerate ground-state or containing heavy atoms, that can not be properly described by LR.

cond-mat.mtrl-sci↗

arXiv2008

Charging Induced Emission of Neutral Atoms from NaCl Nanocube Corners

Detachment of neutral cations/anions from solid alkali halides can in principle be provoked by donating/subtracting electrons to the surface of alkali halide crystals, but generally constitutes a very endothermic process. However, the amount of energy required for emission is smaller for atoms located in less favorable positions, such as surface steps and kinks. For a corner ion in an alkali halide cube the binding is the weakest, so it should be easier to remove that atom, once it is neutralized. We carried out first principles density functional calculations and simulations of neutral and charged NaCl nanocubes, to establish the energetics of extraction of neutralized corner ions. Following hole donation (electron removal) we find that detachment of neutral Cl corner atoms will require a limited energy of about 0.8 eV. Conversely, following the donation of an excess electron to the cube, a neutral Na atom is extractable from the corner at the lower cost of about 0.6 eV. Since the cube electron affinity level (close to that a NaCl(100) surface state, which we also determine) is estimated to lie about 1.8 eV below vacuum, the overall energy balance upon donation to the nanocube of a zero energy electron from vacuum will be exothermic. The atomic and electronic structure of the NaCl(100) surface, and of the nanocube Na and Cl corner vacancies are obtained and analyzed as a byproduct.

cond-mat.mtrl-sci↗

arXiv2006

Orbital magnetization in crystalline solids: Multi-band insulators, Chern insulators, and metals

We derive a multi-band formulation of the orbital magnetization in a normal periodic insulator (i.e., one in which the Chern invariant, or in 2d the Chern number, vanishes). Following the approach used recently to develop the single-band formalism [T. Thonhauser, D. Ceresoli, D. Vanderbilt, and R. Resta, Phys. Rev. Lett. {\bf 95}, 137205 (2005)], we work in the Wannier representation and find that the magnetization is comprised of two contributions, an obvious one associated with the internal circulation of bulk-like Wannier functions in the interior and an unexpected one arising from net currents carried by Wannier functions near the surface. Unlike the single-band case, where each of these contributions is separately gauge-invariant, in the multi-band formulation only the \emph{sum} of both terms is gauge-invariant. Our final expression for the orbital magnetization can be rewritten as a bulk property in terms of Bloch functions, making it simple to implement in modern code packages. The reciprocal-space expression is evaluated for 2d model systems and the results are verified by comparing to the magnetization computed for finite samples cut from the bulk. Finally, while our formal proof is limited to normal insulators, we also present a heuristic extension to Chern insulators (having nonzero Chern invariant) and to metals. The validity of this extension is again tested by comparing to the magnetization of finite samples cut from the bulk for 2d model systems. We find excellent agreement, thus providing strong empirical evidence in favor of the validity of the heuristic formula.

cond-mat.mtrl-sci↗

arXiv2006

Structural and dielectric properties of amorphous ZrO2 and HfO2

Zirconia (ZrO2) and hafnia (HfO2) are leading candidates for replacing SiO2 as the gate insulator in CMOS technology. Amorphous versions of these materials (a-ZrO2 and a-HfO2)) can be grown as metastable phases on top of a silicon buffer; while they tend to recrystallize during subsequent annealing steps, they would otherwise be of considerable interest because of the promise they hold for improved uniformity and electrical passivity. In this work, we report our theoretical studies of a-ZrO2 and a-HfO2 by first-principles density-functional methods. We construct realistic amorphous models using the ``activation-relaxation'' technique (ART) of Barkema and Mousseau. The structural, vibrational, and dielectric properties of the resulting models are analyzed in detail. The overall average dielectric constant is computed and found to be comparable to that of the monoclinic phase.

cond-mat.mtrl-sci↗

arXiv2005

Orbital magnetization in periodic insulators

Working in the Wannier representation, we derive an expression for the orbital magnetization of a periodic insulator. The magnetization is shown to be comprised of two contributions, an obvious one associated with the internal circulation of bulk-like Wannier functions in the interior, and an unexpected one arising from net currents carried by Wannier functions near the surface. Each contribution can be expressed as a bulk property in terms of Bloch functions in a gauge-invariant way. Our expression is verified by comparing numerical tight-binding calculations for finite and periodic samples.

cond-mat.mtrl-sci↗

arXiv2004

Amorphous ZrO2 from Ab-initio molecular dynamics: Structural, electronic and dielectric properties

Realistic models of amorphous ZrO2 are generated in a ``melt-and-quench'' fashion using ab-initio molecular dynamics in a plane-wave pseudopotential formulation of density-functional theory. The structural properties of the resulting amorphous models are analyzed, with special attention to coordination statistics. The vibrational and dielectric properties of one of these models are then investigated from first principles using linear-response methods. The electronic dielectric constant and Born effective charges are found to be very similar to those of the crystalline phases. Encouragingly, the predicted total static dielectric constant is about 22, comparable to that of the monoclinic phase. This work is motivated by the search for improved gate dielectric materials for sub-0.1 micron CMOS technology, and may also have implications for HfO2 and for silicates of ZrO2 and HfO2.

cond-mat.mtrl-sci↗