arXiv subjects

Davide Maltoni

Publications and source records attributed to Davide Maltoni.

At least 37 records · Page 2Linked to original sources

arXiv2023

Architect, Regularize and Replay (ARR): a Flexible Hybrid Approach for Continual Learning

In recent years we have witnessed a renewed interest in machine learning methodologies, especially for deep representation learning, that could overcome basic i.i.d. assumptions and tackle non-stationary environments subject to various distributional shifts or sample selection biases. Within this context, several computational approaches based on architectural priors, regularizers and replay policies have been proposed with different degrees of success depending on the specific scenario in which they were developed and assessed. However, designing comprehensive hybrid solutions that can flexibly and generally be applied with tunable efficiency-effectiveness trade-offs still seems a distant goal. In this paper, we propose "Architect, Regularize and Replay" (ARR), an hybrid generalization of the renowned AR1 algorithm and its variants, that can achieve state-of-the-art results in classic scenarios (e.g. class-incremental learning) but also generalize to arbitrary data streams generated from real-world datasets such as CIFAR-100, CORe50 and ImageNet-1000.

cs.LG↗

arXiv2022

Morphing Attack Potential

In security systems the risk assessment in the sense of common criteria testing is a very relevant topic; this requires quantifying the attack potential in terms of the expertise of the attacker, his knowledge about the target and access to equipment. Contrary to those attacks, the recently revealed morphing attacks against Face Recognition Systems (FRSs) can not be assessed by any of the above criteria. But not all morphing techniques pose the same risk for an operational face recognition system. This paper introduces with the Morphing Attack Potential (MAP) a consistent methodology, that can quantify the risk, which a certain morphing attack creates.

cs.CV↗

arXiv2022

Generative Negative Replay for Continual Learning

Learning continually is a key aspect of intelligence and a necessary ability to solve many real-life problems. One of the most effective strategies to control catastrophic forgetting, the Achilles' heel of continual learning, is storing part of the old data and replaying them interleaved with new experiences (also known as the replay approach). Generative replay, which is using generative models to provide replay patterns on demand, is particularly intriguing, however, it was shown to be effective mainly under simplified assumptions, such as simple scenarios and low-dimensional data. In this paper, we show that, while the generated data are usually not able to improve the classification accuracy for the old classes, they can be effective as negative examples (or antagonists) to better learn the new classes, especially when the learning experiences are small and contain examples of just one or few classes. The proposed approach is validated on complex class-incremental and data-incremental continual learning scenarios (CORe50 and ImageNet-1000) composed of high-dimensional data and a large number of training experiences: a setup where existing generative replay approaches usually fail.

cs.LG↗

arXiv2021

Is Class-Incremental Enough for Continual Learning?

The ability of a model to learn continually can be empirically assessed in different continual learning scenarios. Each scenario defines the constraints and the opportunities of the learning environment. Here, we challenge the current trend in the continual learning literature to experiment mainly on class-incremental scenarios, where classes present in one experience are never revisited. We posit that an excessive focus on this setting may be limiting for future research on continual learning, since class-incremental scenarios artificially exacerbate catastrophic forgetting, at the expense of other important objectives like forward transfer and computational efficiency. In many real-world environments, in fact, repetition of previously encountered concepts occurs naturally and contributes to softening the disruption of previous knowledge. We advocate for a more in-depth study of alternative continual learning scenarios, in which repetition is integrated by design in the stream of incoming information. Starting from already existing proposals, we describe the advantages such class-incremental with repetition scenarios could offer for a more comprehensive assessment of continual learning models.

cs.LG↗

arXiv2021

Continual Learning at the Edge: Real-Time Training on Smartphone Devices

On-device training for personalized learning is a challenging research problem. Being able to quickly adapt deep prediction models at the edge is necessary to better suit personal user needs. However, adaptation on the edge poses some questions on both the efficiency and sustainability of the learning process and on the ability to work under shifting data distributions. Indeed, naively fine-tuning a prediction model only on the newly available data results in catastrophic forgetting, a sudden erasure of previously acquired knowledge. In this paper, we detail the implementation and deployment of a hybrid continual learning strategy (AR1*) on a native Android application for real-time on-device personalization without forgetting. Our benchmark, based on an extension of the CORe50 dataset, shows the efficiency and effectiveness of our solution.

cs.LG↗

arXiv2021

Avalanche: an End-to-End Library for Continual Learning

Learning continually from non-stationary data streams is a long-standing goal and a challenging problem in machine learning. Recently, we have witnessed a renewed and fast-growing interest in continual learning, especially within the deep learning community. However, algorithmic solutions are often difficult to re-implement, evaluate and port across different settings, where even results on standard benchmarks are hard to reproduce. In this work, we propose Avalanche, an open-source end-to-end library for continual learning research based on PyTorch. Avalanche is designed to provide a shared and collaborative codebase for fast prototyping, training, and reproducible evaluation of continual learning algorithms.

cs.LG↗

arXiv2021

Face morphing detection in the presence of printing/scanning and heterogeneous image sources

Face morphing represents nowadays a big security threat in the context of electronic identity documents as well as an interesting challenge for researchers in the field of face recognition. Despite of the good performance obtained by state-of-the-art approaches on digital images, no satisfactory solutions have been identified so far to deal with cross-database testing and printed-scanned images (typically used in many countries for document issuing). In this work, novel approaches are proposed to train Deep Neural Networks for morphing detection: in particular generation of simulated printed-scanned images together with other data augmentation strategies and pre-training on large face recognition datasets, allowed to reach state-of-the-art accuracy on challenging datasets from heterogeneous image sources.

cs.CV↗

arXiv2020

Morphing Attack Detection -- Database, Evaluation Platform and Benchmarking

Morphing attacks have posed a severe threat to Face Recognition System (FRS). Despite the number of advancements reported in recent works, we note serious open issues such as independent benchmarking, generalizability challenges and considerations to age, gender, ethnicity that are inadequately addressed. Morphing Attack Detection (MAD) algorithms often are prone to generalization challenges as they are database dependent. The existing databases, mostly of semi-public nature, lack in diversity in terms of ethnicity, various morphing process and post-processing pipelines. Further, they do not reflect a realistic operational scenario for Automated Border Control (ABC) and do not provide a basis to test MAD on unseen data, in order to benchmark the robustness of algorithms. In this work, we present a new sequestered dataset for facilitating the advancements of MAD where the algorithms can be tested on unseen data in an effort to better generalize. The newly constructed dataset consists of facial images from 150 subjects from various ethnicities, age-groups and both genders. In order to challenge the existing MAD algorithms, the morphed images are with careful subject pre-selection created from the contributing images, and further post-processed to remove morphing artifacts. The images are also printed and scanned to remove all digital cues and to simulate a realistic challenge for MAD algorithms. Further, we present a new online evaluation platform to test algorithms on sequestered data. With the platform we can benchmark the morph detection performance and study the generalization ability. This work also presents a detailed analysis on various subsets of sequestered data and outlines open challenges for future directions in MAD research.

cs.CV↗

arXiv2020

CVPR 2020 Continual Learning in Computer Vision Competition: Approaches, Results, Current Challenges and Future Directions

In the last few years, we have witnessed a renewed and fast-growing interest in continual learning with deep neural networks with the shared objective of making current AI systems more adaptive, efficient and autonomous. However, despite the significant and undoubted progress of the field in addressing the issue of catastrophic forgetting, benchmarking different continual learning approaches is a difficult task by itself. In fact, given the proliferation of different settings, training and evaluation protocols, metrics and nomenclature, it is often tricky to properly characterize a continual learning algorithm, relate it to other solutions and gauge its real-world applicability. The first Continual Learning in Computer Vision challenge held at CVPR in 2020 has been one of the first opportunities to evaluate different continual learning algorithms on a common hardware with a large set of shared evaluation metrics and 3 different settings based on the realistic CORe50 video benchmark. In this paper, we report the main results of the competition, which counted more than 79 teams registered, 11 finalists and 2300$ in prizes. We also summarize the winning approaches, current challenges and future research directions.

cs.CV↗

arXiv2020

Memory-Latency-Accuracy Trade-offs for Continual Learning on a RISC-V Extreme-Edge Node

AI-powered edge devices currently lack the ability to adapt their embedded inference models to the ever-changing environment. To tackle this issue, Continual Learning (CL) strategies aim at incrementally improving the decision capabilities based on newly acquired data. In this work, after quantifying memory and computational requirements of CL algorithms, we define a novel HW/SW extreme-edge platform featuring a low power RISC-V octa-core cluster tailored for on-demand incremental learning over locally sensed data. The presented multi-core HW/SW architecture achieves a peak performance of 2.21 and 1.70 MAC/cycle, respectively, when running forward and backward steps of the gradient descent. We report the trade-off between memory footprint, latency, and accuracy for learning a new class with Latent Replay CL when targeting an image classification task on the CORe50 dataset. For a CL setting that retrains all the layers, taking 5h to learn a new class and achieving up to 77.3% of precision, a more efficient solution retrains only part of the network, reaching an accuracy of 72.5% with a memory requirement of 300 MB and a computation latency of 1.5 hours. On the other side, retraining only the last layer results in the fastest (867 ms) and less memory hungry (20 MB) solution but scoring 58% on the CORe50 dataset. Thanks to the parallelism of the low-power cluster engine, our HW/SW platform results 25x faster than typical MCU device, on which CL is still impractical, and demonstrates an 11x gain in terms of energy consumption with respect to mobile-class solutions.

cs.DC↗

arXiv2020

IROS 2019 Lifelong Robotic Vision Challenge -- Lifelong Object Recognition Report

This report summarizes IROS 2019-Lifelong Robotic Vision Competition (Lifelong Object Recognition Challenge) with methods and results from the top $8$ finalists (out of over~$150$ teams). The competition dataset (L)ifel(O)ng (R)obotic V(IS)ion (OpenLORIS) - Object Recognition (OpenLORIS-object) is designed for driving lifelong/continual learning research and application in robotic vision domain, with everyday objects in home, office, campus, and mall scenarios. The dataset explicitly quantifies the variants of illumination, object occlusion, object size, camera-object distance/angles, and clutter information. Rules are designed to quantify the learning capability of the robotic vision system when faced with the objects appearing in the dynamic environments in the contest. Individual reports, dataset information, rules, and released source code can be found at the project homepage: "https://lifelong-robotic-vision.github.io/competition/".

cs.CV↗

arXiv2020

Continual Reinforcement Learning in 3D Non-stationary Environments

High-dimensional always-changing environments constitute a hard challenge for current reinforcement learning techniques. Artificial agents, nowadays, are often trained off-line in very static and controlled conditions in simulation such that training observations can be thought as sampled i.i.d. from the entire observations space. However, in real world settings, the environment is often non-stationary and subject to unpredictable, frequent changes. In this paper we propose and openly release CRLMaze, a new benchmark for learning continually through reinforcement in a complex 3D non-stationary task based on ViZDoom and subject to several environmental changes. Then, we introduce an end-to-end model-free continual reinforcement learning strategy showing competitive results with respect to four different baselines and not requiring any access to additional supervised signals, previously encountered environmental conditions or observations.

cs.LG↗

arXiv2020

Rehearsal-Free Continual Learning over Small Non-I.I.D. Batches

Robotic vision is a field where continual learning can play a significant role. An embodied agent operating in a complex environment subject to frequent and unpredictable changes is required to learn and adapt continuously. In the context of object recognition, for example, a robot should be able to learn (without forgetting) objects of never before seen classes as well as improving its recognition capabilities as new instances of already known classes are discovered. Ideally, continual learning should be triggered by the availability of short videos of single objects and performed on-line on on-board hardware with fine-grained updates. In this paper, we introduce a novel continual learning protocol based on the CORe50 benchmark and propose two rehearsal-free continual learning techniques, CWR* and AR1*, that can learn effectively even in the challenging case of nearly 400 small non-i.i.d. incremental batches. In particular, our experiments show that AR1* can outperform other state-of-the-art rehearsal-free techniques by more than 15% accuracy in some cases, with a very light and constant computational and memory overhead across training batches.

cs.LG↗

arXiv2020

Latent Replay for Real-Time Continual Learning

Training deep neural networks at the edge on light computational devices, embedded systems and robotic platforms is nowadays very challenging. Continual learning techniques, where complex models are incrementally trained on small batches of new data, can make the learning problem tractable even for CPU-only embedded devices enabling remarkable levels of adaptiveness and autonomy. However, a number of practical problems need to be solved: catastrophic forgetting before anything else. In this paper we introduce an original technique named "Latent Replay" where, instead of storing a portion of past data in the input space, we store activations volumes at some intermediate layer. This can significantly reduce the computation and storage required by native rehearsal. To keep the representation stable and the stored activations valid we propose to slow-down learning at all the layers below the latent replay one, leaving the layers above free to learn at full pace. In our experiments we show that Latent Replay, combined with existing continual learning techniques, achieves state-of-the-art performance on complex video benchmarks such as CORe50 NICv2 (with nearly 400 small and highly non-i.i.d. batches) and OpenLORIS. Finally, we demonstrate the feasibility of nearly real-time continual learning on the edge through the deployment of the proposed technique on a smartphone device.

cs.LG↗

arXiv2019

Continual Learning for Robotics: Definition, Framework, Learning Strategies, Opportunities and Challenges

Continual learning (CL) is a particular machine learning paradigm where the data distribution and learning objective changes through time, or where all the training data and objective criteria are never available at once. The evolution of the learning process is modeled by a sequence of learning experiences where the goal is to be able to learn new skills all along the sequence without forgetting what has been previously learned. Continual learning also aims at the same time at optimizing the memory, the computation power and the speed during the learning process. An important challenge for machine learning is not necessarily finding solutions that work in the real world but rather finding stable algorithms that can learn in real world. Hence, the ideal approach would be tackling the real world in a embodied platform: an autonomous agent. Continual learning would then be effective in an autonomous agent or robot, which would learn autonomously through time about the external world, and incrementally develop a set of complex skills and knowledge. Robotic agents have to learn to adapt and interact with their environment using a continuous stream of observations. Some recent approaches aim at tackling continual learning for robotics, but most recent papers on continual learning only experiment approaches in simulation or with static datasets. Unfortunately, the evaluation of those algorithms does not provide insights on whether their solutions may help continual learning in the context of robotics. This paper aims at reviewing the existing state of the art of continual learning, summarizing existing benchmarks and metrics, and proposing a framework for presenting and evaluating both robotics and non robotics approaches in a way that makes transfer between both fields easier.

cs.LG↗

arXiv2019

Continuous Learning in Single-Incremental-Task Scenarios

It was recently shown that architectural, regularization and rehearsal strategies can be used to train deep models sequentially on a number of disjoint tasks without forgetting previously acquired knowledge. However, these strategies are still unsatisfactory if the tasks are not disjoint but constitute a single incremental task (e.g., class-incremental learning). In this paper we point out the differences between multi-task and single-incremental-task scenarios and show that well-known approaches such as LWF, EWC and SI are not ideal for incremental task scenarios. A new approach, denoted as AR1, combining architectural and regularization strategies is then specifically proposed. AR1 overhead (in term of memory and computation) is very small thus making it suitable for online learning. When tested on CORe50 and iCIFAR-100, AR1 outperformed existing regularization strategies by a good margin.

cs.LG↗

arXiv2018

Don't forget, there is more than forgetting: new metrics for Continual Learning

Continual learning consists of algorithms that learn from a stream of data/tasks continuously and adaptively thought time, enabling the incremental development of ever more complex knowledge and skills. The lack of consensus in evaluating continual learning algorithms and the almost exclusive focus on forgetting motivate us to propose a more comprehensive set of implementation independent metrics accounting for several factors we believe have practical implications worth considering in the deployment of real AI systems that learn continually: accuracy or performance over time, backward and forward knowledge transfer, memory overhead as well as computational efficiency. Drawing inspiration from the standard Multi-Attribute Value Theory (MAVT) we further propose to fuse these metrics into a single score for ranking purposes and we evaluate our proposal with five continual learning strategies on the iCIFAR-100 continual learning benchmark.

cs.AI↗

arXiv2017

CORe50: a New Dataset and Benchmark for Continuous Object Recognition

Continuous/Lifelong learning of high-dimensional data streams is a challenging research problem. In fact, fully retraining models each time new data become available is infeasible, due to computational and storage issues, while naïve incremental strategies have been shown to suffer from catastrophic forgetting. In the context of real-world object recognition applications (e.g., robotic vision), where continuous learning is crucial, very few datasets and benchmarks are available to evaluate and compare emerging techniques. In this work we propose a new dataset and benchmark CORe50, specifically designed for continuous object recognition, and introduce baseline approaches for different continuous learning scenarios.

cs.CV↗