arXiv subjects

Davide Mancusi

Publications and source records attributed to Davide Mancusi.

16 recordsLinked to original sources

arXiv2026

Producing a complete nuclear data library for adjoint Monte Carlo simulations

Radiation shielding applications related to reactor design typically involve situations where the source region (the core) is much larger than the detector region (a dosimeter). In such cases, the efficiency of Monte Carlo simulation might be significantly increased by solving the adjoint transport equation: adjoint particles are born from the detector, undergo adjoint ('reversed') flights and collisions, and accumulate their tallies in the source region. A key prerequisite to sample the adjoint collision events is the preparation of adjoint nuclear data. In this work, we propose a general method able to handle the diversity of nuclear reactions available in modern neutron data evaluations, and ultimately create a full adjoint nuclear data library. This is a stepping stone in view of implementing adjoint sampling schemes in TRIPOLI-5 __ , the next-generation Monte Carlo code developed by CEA and ASNR. We validate this strategy based on a relevant continuous energy benchmark configuration involving mixtures of heavy and light nuclides, and we compare our results to those obtained by standard forward Monte Carlo simulations.

physics.comp-ph↗

arXiv2022

Variance Reduction and Noise Source Sampling Techniques for Monte Carlo Simulations of Neutron Noise Induced by Mechanical Vibrations

Neutron noise in nuclear power reactors refers to the small fluctuations around the average neutron flux at steady state resulting from time-dependent perturbations inside the core. The neutron noise equations in the frequency domain can be solved using Monte Carlo simulation codes, which are capable of obtaining reference solutions involving almost no approximations, but are hindered by severe issues affecting the statistical convergence: the simultaneous presence of positive and negative particles, which is required by the nature of the complex noise equations, leads to catastrophically large variance in the tallies. In this work, we consider the important case of neutron noise problems induced by mechanical vibrations. First, we derive a new exact sampling strategy for the noise source. Then, building upon our previous findings in other contexts, we show that weight cancellation methods can be highly beneficial in dealing with the presence of negative weights, enabling extremely large gains in the figure of merit. We successfully demonstrate our results on a benchmark configuration consisting of a fuel assembly with a vibrating pin and we discuss possible pathways for further improvements.

physics.comp-ph↗

arXiv2022

Unbiasedness and Optimization of Regional Weight Cancellation

The Monte Carlo method is often used to simulate systems which can be modeled by random walks. In order to calculate observables, in many implementations the "walkers" carry a statistical weight which is generally assumed to be positive. Some random walk simulations, however, may require walkers to have positive or negative weights: it has been shown that the presence of a mixture of positive and negative weights can impede the statistical convergence, and special weight-cancellation techniques must be adopted in order to overcome these issues. In a recent work we demonstrated the usefulness of one such method, exact regional weight cancellation, to solve eigenvalue problems in nuclear reactor physics in three spatial dimensions. The method previously exhibited had several limitations (including multi-group transport and isotropic scattering) and needed homogeneous cuboid cancellation regions. In this paper we lift the previous limitations, in view of applying exact regional cancellation to more realistic continuous-energy neutron transport problems. This extended regional cancellation framework is used to optimize the efficiency of the weight cancellation. Our findings are illustrated on a benchmark configuration for reactor physics.

cond-mat.stat-mech↗

arXiv2022

Space and time correlations for diffusion models with prompt and delayed birth-and-death events

Understanding the statistical properties of a collection of individuals subject to random displacements and birth-and-death events is key to several applications in physics and life sciences, encompassing the diagnostic of nuclear reactors and the analysis of epidemic patterns. Previous investigations of the critical regime, where births and deaths balance on average, have shown that highly non-Poissonian fluctuations might occur in the population, leading to spontaneous spatial clustering, and eventually to a critical catastrophe, where fluctuations can result in the extinction of the population. A milder behaviour is observed when the population size is kept constant: thefluctuations asymptotically level off and the critical catastrophe is averted. In this paper, we shall extend these results by considering the broader class of models with prompt and delayed birth-and-death events, which mimic the presence of precursors in nuclear reactor physics or incubation inepidemics. We shall consider models with and without population control mechanisms. Analytical or semi-analytical results for the density, the two-point correlation function and the mean-squared pair distance will be derived and compared to Monte Carlo simulations, which will be used as a reference.

cond-mat.stat-mech↗

arXiv2021

Exact weight cancellation in Monte Carlo eigenvalue transport problems

Random walks are frequently used as a model for very diverse physical phenomena. The Monte Carlo method is a versatile tool for the study of the properties of systems modelled as random walks. Often, each walker is associated with a statistical weight, used in the estimation of observable quantities. Weights are typically assumed to be positive; nonetheless, some applications require the use of positive and negative weights or complex weights, and often pose particular challenges with convergence. In this paper, we examine such a case from the field of nuclear reactor physics, where the negative particle weights prevent the power iteration algorithm from converging on the sought fundamental eigenstate of the Boltzmann transport equation. We demonstrate how the use of weight cancellation allows convergence on the physical eigenstate. To this end, we develop a novel method to perform weight cancellation in an exact manner, in three spatial dimensions. The viability of this algorithm is then demonstrated on a reactor physics problem.

cond-mat.stat-mech↗

arXiv2016

On the role of secondary pions in spallation targets

We use particle-transport simulations to show that secondary pions play a crucial role for the development of the hadronic cascade and therefore for the production of neutrons and photons from thick spallation targets. In particular, for the n_TOF lead spallation target, irradiated with 20 GeV/c protons, neutral pions are involved in the production of ~90% of the high-energy photons; charged pions participate in ~40% of the integral neutron yield. Nevertheless, photon and neutron yields are shown to be relatively insensitive to large changes of the average pion multiplicity in the individual spallation reactions. We characterize this robustness as a peculiar property of hadronic cascades in thick targets.

nucl-th↗

arXiv2015

Improving proton-induced one-nucleon removal in intranuclear cascade

It is a well-established fact that intranuclear-cascade models generally fail to consistently reproduce the cross sections for one-proton and one-neutron removal from stable nuclei by a high-energy proton beam. We use simple shell-model calculations to investigate the reasons of this deficiency. We find that a refined description of the neutron skin and of the energy density in the nuclear surface is crucial for the aforementioned observables, and that neither ingredient is sufficient if taken separately. As a by-product, the predictions for removal of several nucleons are also improved by the refined treatment.

nucl-th↗

arXiv2014

Fission induced by nucleons at intermediate energies

Monte Carlo calculations of fission of actinides and pre-actinides induced by protons and neutrons in the energy range from 100 MeV to 1 GeV are carried out by means of a recent version of the Liège Intranuclear Cascade Model, INCL++, coupled with two different evaporation-fission codes, GEMINI++ and ABLA07. In order to reproduce experimental fission cross sections, model parameters are usually adjusted on available (p,f) cross sections and used to predict (n,f) cross sections for the same isotopes.

nucl-th↗

arXiv2014

Extension of the Liège Intranuclear-Cascade model to reactions induced by light nuclei

The purpose of this paper is twofold. First, we present the extension of the Liège Intranuclear Cascade model to reactions induced by light ions. Second, we describe the C++ version of the code, which it is physics-wise equivalent to the legacy version, is available in Geant4 and will serve as the basis for all future development of the model. We describe the ideas upon which we built our treatment of nucleus-nucleus reactions and we compare the model predictions against a vast set of heterogeneous experimental data. In spite of the discussed limitations of the intranuclear-cascade scheme, we find that our model yields valid predictions for a number of observables and positions itself as one of the most attractive alternatives available to Geant4 users for the simulation of light-ion-induced reactions.

nucl-th↗

arXiv2014

Shell structure and few-nucleon removal in intranuclear cascade

It is well known that intranuclear-cascade models generally overestimate the cross sections for one-proton removal from heavy, stable nuclei by a high-energy proton beam, but they yield reasonable predictions for one-neutron removal from the same nuclei and for one-nucleon removal from light targets. We use simple shell-model calculations to investigate the reasons of this deficiency. We find that a correct description of the neutron skin and of the energy density in the nuclear surface is crucial for the aforementioned observables. Neither ingredient is sufficient if taken separately.

nucl-th↗

arXiv2013

QCD analysis of Lambda hyperon production in DIS target-fragmentation region

We consider Lambda-hyperon production in the target-fragmentation region of semi-inclusive deep-inelastic scattering within the framework of fracture functions. We present a first attempt to determine the flavour and energy dependences of these non-perturbative distributions through a simultaneous QCD-based fit to available neutral- and charged-current semi-inclusive-DIS cross sections. Predictions based on the resulting nucleon-to-Lambda fracture functions are in good agreement with data and observables not included in the regression. The successful prediction of the $Q^2$ dependence of the Lambda multiplicity notably represents the first validation of the perturbative framework implied by fracture functions.

hep-ph↗

arXiv2012

New potentialities of the Liège intranuclear cascade (INCL) model for reactions induced by nucleons and light charged particles

The new version (INCL4.6) of the Li`ege intranuclear cascade (INC) model for the description of spallation reactions is presented in detail. Compared to the standard version (INCL4.2), it incorporates several new features, the most important of which are: (i) the inclusion of cluster production through a dynamical phase space coalescence model, (ii) the Coulomb deflection for entering and outgoing charged particles, (iii) the improvement of the treatment of Pauli blocking and of soft collisions, (iv) the introduction of experimental threshold values for the emission of particles, (v) the improvement of pion dynamics, (vi) a detailed procedure for the treatment of light-cluster induced reactions taking care of the effects of binding energy of the nucleons inside the incident cluster and of the possible fusion reaction at low energy. Performances of the new model concerning nucleon-induced reactions are illustrated. Whenever necessary, the INCL4.6 model is coupled to the ABLA07 deexcitation model and the respective merits of the two models are then tentatively disentangled. Good agreement is generally obtained in the 200 MeV-2 GeV range. Below 200 MeV and down to a few tens of MeV, the total reaction cross section is well reproduced and differential cross sections are reasonably well described. The model is also tested for light-ion induced reactions at low energy, below 100 MeV incident energy per nucleon. Beyond presenting the update of the INCL4.2 model, attention has been paid to applications of the new model to three topics for which some particular aspects are discussed for the first time: production of clusters heavier than alpha particles, longitudinal residue recoil velocity and its fluctuations, total reaction cross section and the residue production cross sections for low energy incident light ions.

nucl-th↗

arXiv2012

Simultaneous fitting of statistical-model parameters to symmetric and asymmetric fission cross sections

The de-excitation of compound nuclei has been successfully described for several decades by means of statistical models. However, accurate predictions require some fine-tuning of the model parameters. This task can be simplified by studying several entrance channels, which populate different regions of the parameter space of the compound nucleus. Fusion reactions play an important role in this strategy because they minimise the uncertainty on the entrance channel by fixing mass, charge and excitation energy of the compound nucleus. If incomplete fusion is negligible, the only uncertainty on the compound nucleus comes from the spin distribution. However, some de-excitation channels, such as fission, are quite sensitive to spin. Other entrance channels can then be used to discriminate between equivalent parameter sets. The focus of this work is on fission and intermediate-mass-fragment emission cross sections of compound nuclei with 70<=A<=240. The statistical de-excitation model is GEMINI++. The choice of the observables is natural in the framework of GEMINI++, which describes fragment emission using a fission-like formalism. Equivalent parameter sets for fusion reactions can be resolved using the spallation entrance channel. This promising strategy can lead to the identification of a minimal set of physical ingredients necessary for a unified quantitative description of nuclear de-excitation.

nucl-th↗

arXiv2011

The elusiveness of multifragmentation footprints in 1-GeV proton-nucleus reactions

We use the tools of hybrid intranuclear-cascade/nuclear-de-excitation models to evaluate the sensitivity of several physical observables to the inclusion of a multifragmentation stage in the de-excitation chain and assess the need for a multifragmentation model in the quantitative description of p+56Fe and p+136Xe reactions at 1-GeV incident energy. We seek clear signatures of multifragmentation by comparing different state-of-the-art de-excitation models coupled with intranuclear-cascade models and by focusing on discriminating observables such as correlations and fragment longitudinal-velocity distributions. None of the considered observables can be unambiguously interpreted as a multifragmentation footprint. The experimental data are best described as originating from sequential binary decays. However, no de-excitation model can reproduce the experimental longitudinal-velocity distributions from 1-GeV p+136Xe.

nucl-th↗

arXiv2010

Influence of nuclear de-excitation on observables relevant for space exploration

The composition of the space radiation environment inside spacecrafts is modified by the interaction with shielding material, with equipment and even with the astronauts' bodies. Accurate quantitative estimates of the effects of nuclear reactions are necessary, for example, for dose estimation and prediction of single-event-upset rates. To this end, it is necessary to construct predictive models for nuclear reactions, which usually consist of an intranuclear-cascade or quantum-molecular-dynamics stage, followed by a nuclear-de-excitation stage. While it is generally acknowledged that it is necessary to accurately simulate the first reaction stage, transport-code users often neglect or underestimate the importance of the choice of the de-excitation code. The purpose of this work is to prove that the de-excitation model is in fact a non-negligible source of uncertainty for the prediction of several observables of crucial importance for space applications. For some particular observables, the systematic uncertainty due to the de-excitation model actually dominates the total uncertainty. Our point will be illustrated by making use of nucleon-nucleus calculations performed with several intranuclear-cascade/de-excitation models, such as the Liège Intranuclear Cascade model (INCL) and Isabel (for the cascade part) and ABLA07, Dresner, GEM, GEMINI++ and SMM (on the de-excitation side).

nucl-th↗

arXiv2010

Unified description of fission in fusion and spallation reactions

We present a statistical-model description of fission, in the framework of compound-nucleus decay, which is found to simultaneously reproduce data from both heavy-ion-induced fusion reactions and proton-induced spallation reactions at around 1 GeV. For the spallation reactions, the initial compound-nucleus population is predicted by the Liège Intranuclear Cascade Model. We are able to reproduce experimental fission probabilities and fission-fragment mass distributions in both reactions types with the same parameter sets. However, no unique parameter set was obtained for the fission probability. The introduction of fission transients can be offset by an increase of the ratio of level-density parameters for the saddle-point and ground-state configurations. Changes to the finite-range fission barriers could be offset by a scaling of the Bohr-Wheeler decay width as predicted by Kramers. The parameter sets presented allow accurate prediction of fission probabilities for excitation energies up to 300 MeV and spins up to 60 \hbar.

nucl-th↗