arXiv subjects

Davide Massarotti

Publications and source records attributed to Davide Massarotti.

At least 19 recordsLinked to original sources

arXiv2026

Resolving unconventional gap structure in kagome superconductors with hybrid microwave circuits

Unconventional superconductivity is a hallmark of exotic quantum matter, where determining the pairing symmetry is essential for uncovering its microscopic origin. Kagome superconductors provide a fertile landscape for emergent phenomena arising from strong electronic correlations and nontrivial band topology, yet their superconducting pairing symmetry remains elusive. The superconducting gap structure is commonly probed via electrodynamic response, but such measurements are inapplicable to thin flakes due to their small volume and delicate nature. Superconducting microwave resonators offer a coherent and highly sensitive platform for probing electrodynamic responses, with versatile designs that enable incorporation of diverse materials and geometries. Here, we integrate flakes into microwave circuits, enabling noninvasive access to the superfluid response through contactless coupling that preserves structural integrity. By engineering the device geometry to suppress parasitic two-level-system losses that dominate dissipation in microwave circuits, we isolate the intrinsic material response. Remarkably, the temperature-dependent superfluid density exhibits linear behavior at low temperatures, consistent with a nodal gap structure. Our approach establishes a noninvasive platform for probing electrodynamic response of fragile superconducting flakes while advancing hybrid microwave architectures for quantum technologies.

cond-mat.supr-con↗

arXiv2026

Simplified Silicon Nitride Nanomembrane Circuits for van der Waals Integration

Two-dimensional (2D) materials and van der Waals (vdW) heterostructures provide an exceptional platform for engineering quantum devices, yet realizing their potential requires electrical integration without compromising the pristine properties of atomically thin crystals through conventional nanofabrication. Transferable circuitry addresses this challenge by decoupling circuit fabrication from device assembly, enabling electrical contacting without directly processing the active material. Here, we introduce SiN$_x$ nanomembrane (NMB) circuits realized through a simplified top-down strategy that reduces fabrication complexity, processing steps and specialized tools required by our previous bottom-up approach. As a stringent benchmark of material preservation, we electrically integrate a four-unit-cell-thick, optimally doped Bi$_2$Sr$_{2-x}$La$_x$CuO$_{6+\delta}$ (Bi2201) flake and observe a superconducting transition at T$_c^{inf}$~32K, close to the T$_c^{onset}$~34K measured by susceptibility in the parent crystals. The preservation of superconductivity demonstrates electrical integration of fragile layered materials without direct exposure to conventional cleanroom procedures, providing a versatile platform for integrating increasingly complicated vdW heterostructures, moir\'e materials, and hybrid quantum architectures.

cond-mat.supr-con↗

arXiv2026

Three wave mixing vacuum squeezing generation in a SNAIL-based Traveling-Wave Parametric Amplifier with alternated flux polarity

Recent demonstrations of squeezing generation using Traveling Wave Parametric Amplifiers (TWPAs) have opened the way for the application of broadband microwave squeezing in quantum sensing, quantum-enhanced detection, and continuous-variable quantum information. Here we demonstrate vacuum squeezing generation via residual three-wave mixing (3WM) in a Josephson TWPA based on superconducting nonlinear asymmetric inductive elements (SNAILs) with alternated magnetic flux polarity. By investigating competition between four-wave mixing (4WM) and 3WM nonlinearities, we prove that vacuum squeezing generation via residual 3WM is possible when a careful choice of the operating flux point is adopted. Our study provides valuable insights on the impact of competing nonlinearities on TWPA squeezers, potentially extending the range of applications in the framework of microwave photonics.

quant-ph↗

arXiv2026

Experimental observation of dynamical blockade between transmon qubits via ZZ interaction engineering

We report the experimental realization of strong longitudinal (ZZ) coupling between two superconducting transmon qubits achieved solely through capacitive engineering. By systematically varying the qubit frequency detuning, we measure cross-Kerr inter-qubit interaction strengths ranging from 10 MHz up to 350 MHz, more than an order of magnitude larger than previously observed in similar capacitively coupled systems. In this configuration, the qubits enter a strong-interaction regime in which the excitation of one qubit inhibits that of its neighbor, demonstrating a dynamical blockade mediated entirely by the engineered ZZ coupling. Circuit quantization simulations accurately reproduce the experimental results, while perturbative models confirm the theoretical origin of the energy shift as a hybridization between the computational states and higher-excitation manifolds. We establish a robust and scalable method to access interaction-dominated physics in superconducting circuits, providing a pathway towards solid-state implementations of globally controlled quantum architectures and cooperative many-body dynamics.

quant-ph↗

arXiv2026

Quantum Circuit-Based Adaptation for Credit Risk Analysis

Noisy and Intermediate-Scale Quantum, or NISQ, processors are sensitive to noise, prone to quantum decoherence, and are not yet capable of continuous quantum error correction for fault-tolerant quantum computation. Hence, quantum algorithms designed in the pre-faulttolerant era cannot neglect the noisy nature of the hardware, and investigating the relationship between quantum hardware performance and the output of quantum algorithms is essential. In this work, we experimentally study how hardware-aware variational quantum circuits on a superconducting quantum processing unit can model distributions relevant to specific use-case applications for Credit Risk Analysis, e.g., standard Gaussian distributions for latent factor loading in the Gaussian Conditional- Independence model. We use a transpilation technique tailored to the specific quantum hardware topology, which minimizes gate depth and connectivity violations, and we calibrate the gate rotations of the circuit to achieve an optimized output from quantum algorithms. Our results demonstrate the viability of quantum adaptation on a small scale, proof-of-concept model inspired by financial applications and offer a good starting point for understanding the practical use of NISQ devices.

quant-ph↗

arXiv2025

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi2Sr2CaCu2O8+x have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, we introduce a fully non-invasive, polarization-resolved Raman spectroscopy approach for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A1g vibrational mode of Bi/Sr at 116 cm-1, we identify clear optical fingerprints of the rotational misalignment between cuprate layers. Our high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm-1, allows for reliable and reproducible measurements without compromising the material's structural integrity.

cond-mat.supr-con↗

arXiv2025

Preserving the Josephson Coupling of Twisted Cuprate Junctions via Tailored Silicon Nitride Circuits Boards

Controlled fabrication of twisted van der Waals heterostructures is essential to unlock the full potential of moire materials. However, achieving reproducibility remains a major challenge, particularly for air-sensitive materials such as $Bi_{2}Sr_{2}CaCu_{2}O_{8+\delta}$ (BSCCO), where it is crucial to preserve the intrinsic and delicate superconducting properties of the interface throughout the entire fabrication process. Here, we present a dry, inert and cryogenic assembly method that combines silicon nitride nanomembranes (NMBs) with pre-patterned electrodes and the cryogenic stacking technique (CST) to fabricate high-quality twisted BSCCO Josephson junctions (JJs). This protocol prevents thermal and chemical degradation during both interface formation and electrical contact integration. We also find that asymmetric membrane designs, such as a double cantilever, effectively suppress vibration-induced disorder due to wire bonding, resulting in sharp and hysteretic current-voltage characteristics. The junctions exhibit a twist-angle-dependent Josephson coupling with magnitudes comparable to the highest-performing devices reported to date, but achieved through a straightforward and versatile contact method, offering a scalable and adaptable platform for future applications. These findings highlight the importance of both interface and contact engineering in addressing reproducibility in superconducting van der Waals heterostructures.

cond-mat.supr-con↗

arXiv2025

Experimental demonstration of non-local magic in a superconducting quantum processor

Non-local magic is the non-stabilizerness that no local unitary operation can erase. It captures the joint action of entanglement and magic underlying quantum advantage, and it has never been measured on quantum hardware. Here we report its first experimental demonstration, on a superconducting quantum processing unit, through two independent routes: an optimal local-erasure protocol and a direct, state-agnostic measurement of subsystem purity. The two agree with each other and with theory. Exploiting direct access to the device, we construct a noise model with no free parameters that identifies readout error and a depolarizing controlled-Z channel as the dominant mechanisms, and we show that local and non-local magic can be addressed separately, erasing local magic in situ while preserving the non-local part. Non-local magic provides a hardware benchmark beyond standard gate-fidelity protocols and points toward more reliable pre-fault tolerant devices.The same tools underlie a purity-estimation protocol with exponential speedup and the decoding of Hawking radiation in a black-hole toy model.

quant-ph↗

arXiv2025

Implementation and readout of maximally entangled two-qubit gates quantum circuits in a superconducting quantum processor

Besides noticeable challenges in implementing low-error single- and two-qubit quantum gates in superconducting quantum processors, the readout technique and analysis are a key factor in determining the efficiency and performance of quantum processors. Being able to efficiently implement quantum algorithms involving entangling gates and asses their output is mandatory for quantum utility. In a transmon-based 5-qubit superconducting quantum processor, we compared the performance of quantum circuits involving an increasing level of complexity, from single-qubit circuits to maximally entangled Bell circuits. This comparison highlighted the importance of the readout analysis and helped us optimize the protocol for more advanced quantum algorithms. Here we report the results obtained from the analysis of the outputs of quantum circuits using two readout paradigms, referred to as "multiplied readout probabilities" and "conditional readout probabilities". The first method is suitable for single-qubit circuits, while the second is essential for accurately interpreting the outputs of circuits involving two-qubit gates.

quant-ph↗

arXiv2025

Nanoscale spin ordering and spin screening effects in tunnel ferromagnetic Josephson junctions

Magnetic Josephson junctions (MJJs) have emerged as a prominent playground to explore the interplay between superconductivity and ferromagnetism. A series of fascinating experiments have revealed striking phenomena at the Superconductor/Ferromagnet (S/F) interface, pointing to tunable phase transitions and to the generation of unconventional spin-triplet correlations. Here, we show that the Josephson effect, being sensitive to phase space variation on the nanoscale, allows a direct observation of the spin polarization of the S/F interface. By measuring the temperature dependence of the Josephson magnetic field patterns of tunnel MJJs with strong and thin F-layer, we demonstrate an induced nanoscale spin order in S along the superconducting coherence length at S/F interface, i.e., the inverse proximity effect, with the first evidence of full spin screening at very low temperatures, as expected by the theory. A comprehensive phase diagram for spin nanoscale ordering regimes at S/F interfaces in MJJs has been derived in terms of the magnetic moment induced in the S-layer. Our findings contribute to drive the design and the tailoring of S/F interfaces also in view of potential applications in quantum computing.

cond-mat.supr-con↗

arXiv2025

Josephson coupling in Lanthanum-based cuprates superlattices

In most anisotropic compounds such as bismuth-based layered cuprate perovskites, the supercurrent across the blocking layer is of Josephson type, and a single crystal forms a natural stack of Josephson junctions. Here, we report on the evidence of Josephson-like transport in an artificial cuprate superlattice composed of 10 LaSrCuO-LaCuO repeats, creating a superlattice of junctions, where LCO is a superconducting Mott insulator and LSCO an overdoped metal, respectively. The superlattice has been designed with a long period d = L+W = 5.28 nm, with L and W the thickness of LCO and LSCO units, respectively, and is in the underdoped regime with an average doping level < {\delta} >= 0.11. Quantum-size effects and Rashba spin-orbit coupling are controlled by L/d = 0.75, with a quasi-2D superconducting transition temperature of 41 K and a c-axis coherence length of about 1.5 nm. Measurements at very low temperatures show evidence of Josephson phase dynamics consistent with very low Josephson coupling and a phase diffusion regime, thus explaining why Josephson coupling in LSCO superlattices has been so elusive. The tuning of LSCO superlattices in the Josephson regime enriches the phase diagram of HTS.

cond-mat.supr-con↗

arXiv2024

Towards novel tunability schemes for hybrid ferromagnetic transmon qubits

Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon.

cond-mat.supr-con↗

arXiv2024

Evidence of the inverse proximity effect in tunnel magnetic Josephson Junctions

Magnetic Josephson Junctions (MJJs) are a special class of hybrid systems where antagonistic correlations coexist, thus providing a key for advances in weak superconductivity, superconducting spintronics and quantum computation. So far, the memory properties of MJJs have been mostly investigated in view of digital electronics and for spintronic devices at liquid-helium temperature. At the operating temperature of quantum circuits, a magnetic order can rise in a Superconductor (S) at the S/Ferromagnet (F) interface, i.e., the inverse proximity effect (IPE), thus leading to a significant modification of the magnetic field patterns in MJJs. In this work, we have carried out a comparative investigation of the magnetic behavior of tunnel MJJs with a strong ferromagnetic layer inserted in the layout of both Nb and Al JJs, respectively. The comparative analysis validates the crucial role of the temperature, the fundamental scaling energies of S/F coupling systems, and the transparency of the S/F interface. This investigation points out that the IPE is a key aspect to consider when designing tunnel MJJs operating well below 4 K and thus in the perspective of hybrid superconducting quantum architectures.

cond-mat.supr-con↗

arXiv2024

On-chip microwave coherent source with in-situ control of the photon number distribution

Coherent photon sources are key elements in different applications, ranging from quantum sensing to quantum computing. The possibility of designing and engineering superconducting circuits behaving like artificial atoms supports the realization of quantum optics protocols, including microwave photons generation. Here we propose and theoretically investigate a design that allows a tunable photon injection directly on-chip. Our approach enables control of the emission via an external knob while preserving, in principle, the stability and linewidth characteristics. This is achieved by replacing the conventional capacitive link between the source and the reservoir with a tunable coupler, with the advantage of avoiding direct dynamical manipulation of the photon source dynamics, providing pulsed control of the emission. We validate the dynamical control of the generated state under the effect of an external flux threading the tunable coupler and discuss the possibility of employing this scheme also in the context of multiple bosonic reservoirs.

quant-ph↗

arXiv2024

Phase dynamics of tunnel Al-based ferromagnetic Josephson junctions

By measuring the current-voltage characteristics and the switching current distributions as a function of temperature, we have investigated the phase dynamics of Al tunnel ferromagnetic Josephson junctions (JJs), designed to fall in the typical range of parameters of state-of-the-art transmons, providing evidence of phase diffusion processes. The comparison with the experimental outcomes on non-magnetic JJs with nominally the same electrodynamical parameters demonstrates that the introduction of ferromagnetic barriers does not cause any sizeable detrimental effect, and supports the notion of including tunnel ferromagnetic JJs in qubit architectures.

cond-mat.supr-con↗

arXiv2024

Mitigating Errors on Superconducting Quantum Processors through Fuzzy Clustering

Quantum utility has been severely limited in superconducting quantum hardware until now by the modest number of qubits and the relatively high level of control and readout errors, due to the intentional coupling with the external environment required for manipulation and readout of the qubit states. Practical applications in the Noisy Intermediate Scale Quantum (NISQ) era rely on Quantum Error Mitigation (QEM) techniques, which are able to improve the accuracy of the expectation values of quantum observables by implementing classical post-processing analysis from an ensemble of repeated noisy quantum circuit runs. In this work, we focus on a recent QEM technique that uses Fuzzy C-Means (FCM) clustering to specifically identify measurement error patterns. For the first time, we report a proof-of-principle validation of the technique on a 2-qubit register, obtained as a subset of a real NISQ 5-qubit superconducting quantum processor based on transmon qubits. We demonstrate that the FCM-based QEM technique allows for reasonable improvement of the expectation values of single- and two-qubit gates based quantum circuits, without necessarily invoking state-of-the-art coherence, gate, and readout fidelities.

quant-ph↗

arXiv2023

Discriminating the Phase of a Coherent Tone with a Flux-Switchable Superconducting Circuit

We propose a new phase detection technique based on a flux-switchable superconducting circuit, the Josephson digital phase detector (JDPD), which is capable of discriminating between two phase values of a coherent input tone. When properly excited by an external flux, the JDPD is able to switch from a single-minimum to a double-minima potential and, consequently, relax in one of the two stable configurations depending on the phase sign of the input tone. The result of this operation is digitally encoded in the occupation probability of a phase particle in either of the two JDPD wells. In this work, we demonstrate the working principle of the JDPD up to a frequency of 400 MHz with a remarkable agreement with theoretical expectations. As a future scenario, we discuss the implementation of this technique to superconducting qubit readout. We also examine the JDPD compatibility with the single-flux-quantum architecture, employed to fast-drive and measure the device state.

quant-ph↗

arXiv2022

A hybrid ferromagnetic transmon qubit: circuit design, feasibility and detection protocols for magnetic fluctuations

We propose to exploit currently available tunnel ferromagnetic Josephson junctions to realize a hybrid superconducting qubit. We show that the characteristic hysteretic behavior of the ferromagnetic barrier provides an alternative and intrinsically digital tuning of the qubit frequency by means of magnetic field pulses. To illustrate functionalities and limitation of the device, we discuss the coupling to a read-out resonator and the effect of magnetic fluctuations. The possibility to use the qubit as a noise detector and its relevance to investigate the subtle interplay of magnetism and superconductivity is envisaged.

cond-mat.supr-con↗