arXiv subjects

Davide Spirito

Publications and source records attributed to Davide Spirito.

At least 19 recordsLinked to original sources

arXiv2026

A new helical InSeI polymorph: crystal structure and polarized Raman spectroscopy study

Tetragonal InSeI is an interesting low-dimensional metal chalcohalide due to its composition and anisotropic crystal structure composed of helical chains, which give rise to optoelectronic properties with potential application in photodetectors, optical thermometers, and spintronic devices. However, experimental works lack on the study of its anisotropic or chiral behavior. Here we present the crystal structure of an unreported InSeI polymorph and study its lattice dynamics in bulk crystals and exfoliated nanowires by polarized Raman spectroscopy for two non-equivalent crystallographic planes. We determine the orientation of the helical chains and distinguish between crystallographic planes by linearly polarized measurements, evaluating the angle-dependent intensity of the modes, which allows assigning each mode to its representation. Circularly polarized Raman measurements do not reveal chiral phonons, despite the helical chains and anisotropic crystal structure. These results offer insight into the crystal structure of InSeI, which is fundamental for the fabrication of orientation-dependent optoelectronic and spintronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Resolving the Metastable Si-XIII Structure through Convergent Theory and Experiment

Silicon is the undisputed cornerstone of modern technology, with applications ranging from micro- and opto-electronics to quantum technologies. Recently, the exploration of its allotropes has emerged as a pivotal frontier for engineering materials with tailored optical and electronic functionalities. High-pressure experiments have revealed several metastable silicon phases, among which is Si-XIII. First observed more than 20 years ago, this phase has remained structurally unidentified, representing a significant gap in our understanding of elemental silicon allotropy. In this work, a convergent methodology is employed combining advanced theoretical modeling with experimental characterization to finally resolve the long-standing structural assignment of Si-XIII. Guided by careful experimental observations, a structural model validated through first-principles optimization and systematically tested against multiple experimental signatures is constructed. All the fingerprints of this phase are rationalized by our proposed crystal structure: interplanar spacings, Raman frequencies, thermodynamic stability, and kinetic pathways. These findings provide a crucial missing piece in the high-pressure phase diagram of silicon and demonstrate the power of integrating computational predictions with experimental validation to resolve complex structural problems in materials science.

cond-mat.mtrl-sci↗

arXiv2026

Phase Transitions in Low-Dimensional Layered Double Perovskites: The Role of the Organic Moieties

Halide double perovskites are an interesting alternative to Pb-containing counterparts as active materials in optoelectronic devices. Low-dimensional double perovskites are fabricated by introducing large organic cations, resulting in organic/inorganic architectures with one or more inorganic octahedral layers separated by organic cations. Here, we synthesize layered double perovskites based on 3D Cs2AgBiBr6 that consist of double (2L) or single (1L) inorganic octahedral layers, using ammonium cations of different size and chemical structure. Temperature-dependent Raman spectroscopy reveals phase transition signatures in both inorganic lattice and organic moieties by detecting variations in their vibrational modes. Changes in the conformational arrangement of the organic cations to an ordered state coincide with a phase transition in the 1L systems with the shortest ammonium moieties. Significant changes of photoluminescence intensity observed around the transition temperature suggest that optical properties may be deeply affected by the octahedral tilts emerging at the phase transition.

cond-mat.mtrl-sci↗

arXiv2025

Lattice dynamics in chiral tellurium by linear and circularly polarized Raman spectroscopy: crystal orientation and handedness

Trigonal tellurium (Te) has attracted researchers' attention due to its transport and optical properties, which include electrical magneto-chiral anisotropy, spin polarization and bulk photovoltaic effect. It is the anisotropic and chiral crystal structure of Te that drive these properties, so the determination of its crystallographic orientation and handedness is key to their study. Here we explore the structural dynamics of Te bulk crystals by angle-dependent linearly polarized Raman spectroscopy and symmetry rules in three different crystallographic orientations. The angle-dependent intensity of the modes allows us to determine the arrangement of the helical chains and distinguish between crystallographic planes parallel and perpendicular to the chain axis. Furthermore, under different configurations of circularly polarized Raman measurements and crystal orientations, we observe the shift of two phonon modes only in the (0 0 1) plane. The shift is positive or negative depending on the handedness of the crystals, which we determine univocally by chemical etching. Our analysis of three different crystal faces of Te highlights the importance of selecting the proper orientation and crystallographic plane when investigating the transport and optical properties of this material. These results offer insight into the crystal structure and symmetry in other anisotropic and chiral materials, and open new paths to select a suitable crystal orientation when fabricating devices.

cond-mat.mtrl-sci↗

arXiv2024

Formation of Micrometer-Sized Textured Hexagonal Silicon Crystals via Nanoindentation

We present a comprehensive study on the formation of micrometer-sized, textured hexagonal diamond silicon (hd-Si) crystals via nanoindentation followed by annealing. Utilizing advanced characterization techniques such as polarized Raman spectroscopy, high-resolution transmission electron microscopy, and electron energy-loss spectroscopy, we demonstrate the successful transformation of silicon into high-quality hd-Si. The experimental results are further supported by first-principles calculations and molecular dynamics simulations. Notably, the hd-Si phase consists of nanometer-sized grains with slight misorientations, organized into large micrometer-scale textured domains. These findings underscore the potential of nanoindentation as a precise and versatile tool for inducing pressure-driven phase transformations, particularly for the stabilization of hexagonal silicon. The textured nature of hd-Si also presents a unique opportunity to tailor its optical properties, opening new avenues for its application in semiconductor and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Tailoring Photoluminescence by Strain-Engineering in Layered Perovskite Flakes

Strain is an effective strategy to modulate the optoelectronic properties of 2D materials, but it has been almost unexplored in layered hybrid organic-inorganic metal halide perovskites (HOIPs) due to their complex band structure and mechanical properties. Here, we investigate the temperature-dependent microphotoluminescence (PL) of 2D $(C_6H_5CH_2CH_2NH_3)_2Cs_3Pb_4Br_{13}$ HOIP subject to biaxial strain induced by a $SiO_2$ ring platform on which flakes are placed by viscoelastic stamping. At 80 K, we found that a strain of <1% can change the PL emission from a single peak (unstrained) to three well-resolved peaks. Supported by micro-Raman spectroscopy, we show that the thermomechanically generated strain modulates the bandgap due to changes in the octahedral tilting and lattice expansion. Mechanical simulations demonstrate the coexistence of tensile and compressive strain along the flake. The observed PL peaks add an interesting feature to the rich phenomenology of photoluminescence in 2D HOIPs, which can be exploited in tailored sensing and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Magnetic properties of layered hybrid organic-inorganic metal-halide perovskites: transition metal, organic cation and perovskite phase effects

Understanding the structural and magnetic properties in layered hybrid organic-inorganic metal halide perovskites (HOIPs) is key for their design and integration in spin-electronic devices. Here, we have conducted a systematic study on ten compounds to understand the effect of the transition metal (Cu$^{2+}$, Mn$^{2+}$, Co$^{2+}$), organic spacer (alkyl- and aryl-ammonium) and perovskite phase (Ruddlesden-Popper and Dion-Jacobson) on the properties of these materials. Temperature-dependent Raman measurements show that the crystals' structural phase transitions are triggered by the motional freedom of the organic cations as well as by the flexibility of the inorganic metal-halide lattice. In the case of Cu$^{2+}$ HOIPs, an increase of the in-plane anisotropy and a reduction of the octahedra interlayer distance is found to change the behavior of the HOIP from that of a 2D ferromagnet to that of a quasi-3D antiferromagnet. Mn$^{2+}$ HOIPs show inherent antiferromagnetic octahedra intralayer interactions and a phenomenologically rich magnetism, presenting spin-canting, spin-flop transitions and metamagnetism controlled by the crystal anisotropy. Co$^{2+}$ crystals with non-linked tetrahedra show a dominant paramagnetic behavior irrespective of the organic spacer and the perovskite phase. This work demonstrates that the chemical flexibility of HOIPs can be exploited to develop novel layered magnetic materials with tailored magnetic properties.

cond-mat.mtrl-sci↗

arXiv2024

Thermal expansion and temperature dependence of Raman modes in epitaxial layers of Ge and Ge$_{1-x}$Sn$_{x}$

Temperature dependence of vibrational modes in semiconductors depends on lattice thermal expansion and anharmonic phonon-phonon scattering. Evaluating the two contributions from experimental data is not straightforward, especially for epitaxial layers that present mechanical deformation and anisotropic lattice expansion. In this work, a temperature-dependent Raman study in epitaxial Ge and Ge$_{1-x}$Sn$_{x}$ layers is presented. A model is introduced for the Raman mode energy shift as a function of temperature, comprising thermal expansion of the strained lattice and anharmonic corrections. With support of x-ray diffraction, the model is calibrated on experimental data of epitaxial Ge grown on Si and Ge$_{1-x}$Sn$_{x}$ grown on Ge/Si, finding that the main difference between bulk and epitaxial layers is related to the anisotropic lattice expansion. The phonon anharmonicity and other parameters do not depend on dislocation defect density (in the range $7\cdot 10^6$ - $4\cdot 10^8$ cm$^{-2}$) nor on alloy composition in the range 5-14 at.%. The strain-shift coefficient for the main model of Ge and for the Ge-Ge vibrational mode of Ge$_{1-x}$Sn$_{x}$ is weakly dependent on temperature and is around -500 cm$^{-1}$. In Ge$_{1-x}$Sn$_{x}$, the composition-shift coefficient amounts to -100 cm$^{-1}$, independent of temperature and strain.

cond-mat.mtrl-sci↗

arXiv2023

Local Alloy Order in a Ge1-xSnx/Ge Epitaxial Layer

The local ordering of atoms in alloys directly has a strong impact on their electronic and optical properties. This is particularly relevant in nonrandom alloys, especially if they are deposited using far from the equilibrium processes, as is the case of epitaxial Ge1-xSnx layers. In this work, we investigate the arrangement of Ge and Sn atoms in optoelectronic grade Ge1-xSnx epitaxial layers featuring a Sn content in the 5-14% range by using polarization-dependent Raman spectroscopy and density-functional-theory calculations. The thorough analysis of the polarization-dependent spectra in parallel and perpendicular configuration allowed us to properly tag all the observed vibrational modes, and to shed light on that associated to disorder-assisted Raman transitions. Indeed, with the help of large-scale atomistic simulations, we were able to highlight how the presence of Sn atoms, that modify the local environments of Ge atoms, gives rise to two spectral features at different Raman shifts, corresponding to distortions of the atomic bonds. This analysis provides a valuable framework for advancing the understanding of the vibrational properties in Ge1-xSnx alloys, particularly with regard to the impact of local ordering of the different atomic species.

cond-mat.mtrl-sci↗

arXiv2020

Graphene Plasmonic Fractal Metamaterials for Broadband Photodetectors

Metamaterials have recently established a new paradigm for enhanced light absorption in state-of-the-art photodetectors. Here, we demonstrate broadband, highly efficient, polarization-insensitive, and gate-tunable photodetection at room temperature in a novel metadevice based on gold/graphene Sierpinski carpet plasmonic fractals. We observed an unprecedented internal quantum efficiency up to 100% from the near-infrared to the visible range with an upper bound of optical detectivity of $10^{11}$ Jones and a gain up to $10^{6}$, which is a fingerprint of multiple hot carriers photogenerated in graphene. Also, we show a 100-fold enhanced photodetection due to highly focused (up to a record factor of $|E/E_{0}|\approx20$ for graphene) electromagnetic fields induced by electrically tunable multimodal plasmons, spatially localized in self-similar fashion on the metasurface. Our findings give direct insight into the physical processes governing graphene plasmonic fractal metamaterials. The proposed structure represents a promising route for the realization of a broadband, compact, and active platform for future optoelectronic devices including multiband bio/chemical and light sensors.

physics.app-ph↗

arXiv2020

Temperature Driven Transformation of CsPbBr$_3$ Nanoplatelets into Mosaic Nanotiles in Solution through Self-Assembly

Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light emitting applications. In addition, they can be used as components to create a variety of materials through physical and chemical transformations. Recent studies focused on nanoplatelets that are able to self-assemble and transform on solid substrates. Yet, the mechanism behind the process and the atomic arrangement of their assemblies remain unclear. Here, we present the transformation of self-assembled stacks of CsPbBr$_3$ nanoplatelets in solution, capturing the different stages of the process by keeping the solutions at room temperature and monitoring the nanocrystal morphology over a period of a few months. Using ex-situ transmission electron microscopy and surface analysis, we demonstrate that the transformation mechanism can be understood as oriented attachment, proceeding through the following steps: i) desorption of the ligands from the particles surfaces, causing the merging of nanoplatelet stacks, which first form nanobelts; ii) merging of neighboring nanobelts that form more extended nanoplates; and iii) attachment of nanobelts and nanoplates, which create objects with an atomic structure that resemble a mosaic made of broken nanotiles. We reveal that the starting nanoplatelets merge seamlessly and defect-free on an atomic scale in small and thin nanobelts. However, aged nanobelts and nanoplates, which are mainly stabilized by amine/ammonium ions, link through a bilayer of CsBr. In this case, the atomic columns of neighboring perovskite lattices shift by a half-unit-cell, forming Ruddlesden-Popper planar faults.

physics.app-ph↗

arXiv2020

Solution-processed silver sulphide nanocrystal film for resistive switching memories

Resistive switching memories allow electrical control of the conductivity of a material, by inducing a high resistance (OFF) or a low resistance (ON) state, using electrochemical and ion transport processes. As alternative to high temperature and vacuum-based physical sulphurization methods of silver (Ag), here we propose, as resistive switching medium, a layer built from colloidal Ag$_{2-x}$S nanocrystals -compatible with solution-processed approaches. The effect of the electrode size (from macro- to micro-scale), composition (Ag, Ti and Pt) and geometry on the device performance together with the electrochemical mechanisms involved are evaluated. We achieved an optimized Ag/Ti bowtie proof-of-concept configuration by e-beam lithography, which fulfils the general requirements for ReRAM devices in terms of low power consumption and reliable $I_{ON}/I_{OFF}$ ratio. This configuration demonstrates reproducible switching between ON and OFF states with data endurance of at least 20 cycles; and an $I_{ON}/I_{OFF}$ ratio up to 10$^3$ at low power consumption (0.1V readout), which outperforms previous results in literature for devices with resistive layers fabricated from silver chalcogenide nanoparticles.

physics.app-ph↗

arXiv2020

Planar Aperiodic Arrays as Metasurfaces for Optical Near-Field Patterning

Plasmonic metasurfaces have spawned the field of flat optics using nanostructured planar metallic or dielectric surfaces that can replace bulky optical elements and enhance the capabilities of traditional far-field optics. Furthermore, the potential of flat optics can go far beyond far-field modulation, and can be exploited for functionality in the near-field itself. Here, we design metasurfaces based on aperiodic arrays of plasmonic Au nanostructures for tailoring the optical near-field in the visible and near-infrared spectral range. The basic element of the arrays is a rhomboid that is modulated in size, orientation and position to achieve the desired functionality of the micron-size metasurface structure. Using two-photon-photoluminescence as a tool to probethe near-field profiles in the plane of the metasurfaces, we demonstrate the molding of light into different near-field intensity patterns and active pattern control via the far-field illumination. Finite element method simulations reveal that the near-field modulation occurs via a combination of the plasmonic resonances of the rhomboids and field enhancement in the nanoscale gaps in between the elements. This approach enables optical elements that can switch the near-field distribution across the metasurface via wavelength and polarization of the incident far-field light, and provides pathways for light matter interaction in integrated devices.

physics.app-ph↗

arXiv2020

Nano- and microscale apertures in metal films fabricated by colloidal lithography with perovskite nanocrystals

We demonstrate patterning of metal surfaces based on lift-off of perovskite nanocrystals that enables the fabrication of nanometer-size features without the use of resist-based nanolithography. The perovskite nanocrystals act as templates for defining the shape of the apertures in metal layers, and we exploit the variety of sizes and shapes that can be controlled in the colloidal synthesis to demonstrate the fabrication of nanoholes, nanogaps and guides with size smaller than the wavelength of light in the visible spectrum. The process can be readily integrated with standard lithography and etching techniques for the creation of more complex structures.

physics.chem-ph↗

arXiv2020

Extending the colloidal transition metal dichalcogenide library to ReS2 nanosheets for application in gas sensing and electrocatalysis

Among the large family of transition metal dichalcogenides (TMDCs), recently ReS2 has stood out due to its nearly layer-independent optoelectronic and physicochemical properties. These are related to its 1T distorted octahedral structure, which leads to strong in-plane anisotropy and the presence of active sites at its surface, which makes ReS2 interesting for applications such as gas sensors and catalysts for H2 production. However, the current fabrication methods for ReS2 use chemical or physical vapor deposition (CVD or PVD) processes that are costly and involve complex and lengthy fabrication procedures, therefore limiting their large-scale production and exploitation. To address this issue, we developed a colloidal synthesis approach, which allows the production of ReS2 to be attained at temperatures below 360 Celsius degrees and with reaction times < 2 h, resulting in a more cost-efficient strategy than the CVD and PVD methods. By combining the solution-based synthesis with surface functionalization strategies, we demonstrate the feasibility of colloidal ReS2 nanosheet films for gas sensing of different toxic gases, moisture and other volatile compounds with highly competitive performance in comparison with devices built with CVD-grown ReS2 and MoS2. In addition, the integration of the ReS2 nanosheet films in assemblies, in which they are deposited on top of networks of carbon nanotubes, allowed us to fabricate electrodes for electrocatalysis for H2 production in both acid and alkaline conditions. Results from proof-of-principle devices show an electrocatalytic overpotential that is competitive with devices based on ReS2 produced by CVD, and even with MoS2, WS2 and MoSe2 electrocatalysts.

physics.app-ph↗

arXiv2019

Thioethyl-porphyrazine/Nanocarbon Hybrids for Photoinduced Electron Transfer

We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) energy values, matching the key requirements of organic optoelectronic. Moreover, the presence of a pyrene moiety promotes attractive interactions with pi-conjugated systems. In particular, theoretical calculations show that in the PzPy the HOMO and LUMO are localized on different positions of the molecule, i.e., the HOMO on the pyrene moiety and the LUMO on the macrocycle. Therefore, HOMO-LUMO excitation gives rise to a charge separation, preventing excitons recombination. Two kinds of non-covalent hybrid composites are prepared by mixing the PzPy with single wall carbon nanotubes (SWNTs) and graphene nanoflakes (GNFs), respectively, and used for photocurrent generation through charge transfer processes between PzPy and nanocarbons. Photoconduction experiments show photocurrent generation upon visible light irradiation of both PzPy/SWNT and PzPy/GNF composites (0.78 and 0.71 mA/W at 500 nm, respectively), demonstrating their suitability for optoelectronic applications and light harvesting systems.

physics.chem-ph↗

arXiv2018

UV Light Detection from CdS Nanocrystal Sensitized Graphene Photodetectors at kHz Frequencies

We have fabricated UV-sensitive photodetectors based on colloidal CdS nanocrystals and graphene. The nanocrystals act as a sensitizer layer that improves light harvesting leading to high responsivity of the detector. Despite the slow relaxation of the photogenerated charges in the nanocrystal film, faster processes allowed to detect pulses up to a repetition rate of 2 kHz. We have performed time-resolved analysis of the processes occurring in our hybrid system, and discuss possible photo-induced charge transfer mechanisms.

cond-mat.mes-hall↗

arXiv2018

Multiband Plasmonic Sierpinski Carpet Fractal Antennas

Deterministic fractal antennas are employed to realize multimodal plasmonic devices. Such structures show strongly enhanced localized electromagnetic fields typically in the infrared range with a hierarchical spatial distribution. Realization of engineered fractal antennas operating in the optical regime would enable nanoplasmonic platforms for applications, such as energy harvesting, light sensing, and bio/chemical detection. Here, we introduce a novel plasmonic multiband metamaterial based on the Sierpinski carpet (SC) space-filling fractal, having a tunable and polarization-independent optical response, which exhibits multiple resonances from the visible to mid-infrared range. We investigate gold SCs fabricated by electron-beam lithography on CaF$_{2}$ and Si/SiO$_{2}$ substrates. Furthermore, we demonstrate that such resonances originate from diffraction-mediated localized surface plasmons, which can be tailored in deterministic fashion by tuning the shape, size, and position of the fractal elements. Moreover, our findings illustrate that SCs with high order of complexity present a strong and hierarchically distributed electromagnetic near-field of the plasmonic modes. Therefore, engineered plasmonic SCs provide an efficient strategy for the realization of compact active devices with a strong and broadband spectral response in the visible/mid-infrared range. We take advantage of such a technology by carrying out surface enhanced Raman spectroscopy (SERS) on Brilliant Cresyl Blue molecules deposited onto plasmonic SCs. We achieve a broadband SERS enhancement factor up to $10^{4}$, thereby providing a proof-of-concept application for chemical diagnostics.

physics.optics↗