arXiv subjects

Debajyoti Mondal

Publications and source records attributed to Debajyoti Mondal.

47 records · Page 3Linked to original sources

arXiv2018

A New Approach to GraphMaps, a System Browsing Large Graphs as Interactive Maps

A GraphMaps is a system that visualizes a graph using zoom levels, which is similar to a geographic map visualization. GraphMaps reveals the structural properties of the graph and enables users to explore the graph in a natural way by using the standard zoom and pan operations. The available implementation of GraphMaps faces many challenges such as the number of zoom levels may be large, nodes may be unevenly distributed to different levels, shared edges may create ambiguity due to the selection of multiple nodes. In this paper, we develop an algorithmic framework to construct GraphMaps from any given mesh (generated from a 2D point set), and for any given number of zoom levels. We demonstrate our approach introducing competition mesh, which is simple to construct, has a low dilation and high angular resolution. We present an algorithm for assigning nodes to zoom levels that minimizes the change in the number of nodes on visible on the screen while the user zooms in and out between the levels. We think that keeping this change small facilitates smooth browsing of the graph. We also propose new node selection techniques to cope with some of the challenges of the GraphMaps approach.

cs.CG↗

arXiv2018

Minimum Shared-Power Edge Cut

We introduce a problem called the Minimum Shared-Power Edge Cut (MSPEC). The input to the problem is an undirected edge-weighted graph with distinguished vertices s and t, and the goal is to find an s-t cut by assigning "powers" at the vertices and removing an edge if the sum of the powers at its endpoints is at least its weight. The objective is to minimize the sum of the assigned powers. MSPEC is a graph generalization of a barrier coverage problem in a wireless sensor network: given a set of unit disks with centers in a rectangle, what is the minimum total amount by which we must shrink the disks to permit an intruder to cross the rectangle undetected, i.e. without entering any disc. This is a more sophisticated measure of barrier coverage than the minimum number of disks whose removal breaks the barrier. We develop a fully polynomial time approximation scheme (FPTAS) for MSPEC. We give polynomial time algorithms for the special cases where the edge weights are uniform, or the power values are restricted to a bounded set. Although MSPEC is related to network flow and matching problems, its computational complexity (in P or NP-hard) remains open.

cs.DS↗

arXiv2018

Boundary Labeling for Rectangular Diagrams

Given a set of $n$ points (sites) inside a rectangle $R$ and $n$ points (label locations or ports) on its boundary, a boundary labeling problem seeks ways of connecting every site to a distinct port while achieving different labeling aesthetics. We examine the scenario when the connecting lines (leaders) are drawn as axis-aligned polylines with few bends, every leader lies strictly inside $R$, no two leaders cross, and the sum of the lengths of all the leaders is minimized. In a $k$-sided boundary labeling problem, where $1\le k\le 4$, the label locations are located on the $k$ consecutive sides of $R$. In this paper, we develop an $O(n^3\log n)$-time algorithm for 2-sided boundary labeling, where the leaders are restricted to have one bend. This improves the previously best known $O(n^8\log n)$-time algorithm of Kindermann et al. (Algorithmica, 76(1):225-258, 2016). We show the problem is polynomial-time solvable in more general settings such as when the ports are located on more than two sides of $R$, in the presence of obstacles, and even when the objective is to minimize the total number of bends. Our results improve the previous algorithms on boundary labeling with obstacles, as well as provide the first polynomial-time algorithms for minimizing the total leader length and number of bends for 3- and 4-sided boundary labeling. These results settle a number of open questions on the boundary labeling problems (Wolff, Handbook of Graph Drawing, Chapter 23, Table 23.1, 2014).

cs.CG↗

arXiv2018

Angle-Monotone Graphs: Construction and Local Routing

A geometric graph in the plane is angle-monotone of width $γ$ if every pair of vertices is connected by an angle-monotone path of width $γ$, a path such that the angles of any two edges in the path differ by at most $γ$. Angle-monotone graphs have good spanning properties. We prove that every point set in the plane admits an angle-monotone graph of width $90^\circ$, hence with spanning ratio $\sqrt 2$, and a subquadratic number of edges. This answers an open question posed by Dehkordi, Frati and Gudmundsson. We show how to construct, for any point set of size $n$ and any angle $α$, $0 < α< 45^\circ$, an angle-monotone graph of width $(90^\circ+α)$ with $O(\frac{n}α)$ edges. Furthermore, we give a local routing algorithm to find angle-monotone paths of width $(90^\circ+α)$ in these graphs. The routing ratio, which is the ratio of path length to Euclidean distance, is at most $1/\cos(45^\circ + \fracα{2})$, i.e., ranging from $\sqrt 2 \approx 1.414$ to $2.613$. For the special case $α= 30^\circ$, we obtain the $Θ_6$-graph and our routing algorithm achieves the known routing ratio 2 while finding angle-monotone paths of width $120^\circ$.

cs.CG↗

arXiv2017

On Upward Drawings of Trees on a Given Grid

Computing a minimum-area planar straight-line drawing of a graph is known to be NP-hard for planar graphs, even when restricted to outerplanar graphs. However, the complexity question is open for trees. Only a few hardness results are known for straight-line drawings of trees under various restrictions such as edge length or slope constraints. On the other hand, there exist polynomial-time algorithms for computing minimum-width (resp., minimum-height) upward drawings of trees, where the height (resp., width) is unbounded. In this paper we take a major step in understanding the complexity of the area minimization problem for strictly-upward drawings of trees, which is one of the most common styles for drawing rooted trees. We prove that given a rooted tree $T$ and a $W\times H$ grid, it is NP-hard to decide whether $T$ admits a strictly-upward (unordered) drawing in the given grid.

cs.CG↗

arXiv2017

A Note on Plus-Contacts, Rectangular Duals, and Box-Orthogonal Drawings

A plus-contact representation of a planar graph $G$ is called $c$-balanced if for every plus shape $+_v$, the number of other plus shapes incident to each arm of $+_v$ is at most $ c Δ+O(1)$, where $Δ$ is the maximum degree of $G$. Although small values of $c$ have been achieved for a few subclasses of planar graphs (e.g., $2$- and $3$-trees), it is unknown whether $c$-balanced representations with $c<1$ exist for arbitrary planar graphs. In this paper we compute $(1/2)$-balanced plus-contact representations for all planar graphs that admit a rectangular dual. Our result implies that any graph with a rectangular dual has a 1-bend box-orthogonal drawings such that for each vertex $v$, the box representing $v$ is a square of side length $\frac{deg(v)}{2}+ O(1)$.

cs.CG↗

arXiv2017

On String Contact Representations in 3D

An axis-aligned string is a simple polygonal path, where each line segment is parallel to an axis in $\mathbb{R}^3$. Given a graph $G$, a string contact representation $Ψ$ of $G$ maps the vertices of $G$ to interior disjoint axis-aligned strings, where no three strings meet at a point, and two strings share a common point if and only if their corresponding vertices are adjacent in $G$. The complexity of $Ψ$ is the minimum integer $r$ such that every string in $Ψ$ is a $B_r$-string, i.e., a string with at most $r$ bends. While a result of Duncan et al. implies that every graph $G$ with maximum degree 4 has a string contact representation using $B_4$-strings, we examine constraints on $G$ that allow string contact representations with complexity 3, 2 or 1. We prove that if $G$ is Hamiltonian and triangle-free, then $G$ admits a contact representation where all the strings but one are $B_3$-strings. If $G$ is 3-regular and bipartite, then $G$ admits a contact representation with string complexity 2, and if we further restrict $G$ to be Hamiltonian, then $G$ has a contact representation, where all the strings but one are $B_1$-strings (i.e., $L$-shapes). Finally, we prove some complementary lower bounds on the complexity of string contact representations.

cs.CG↗

arXiv2017

Exploring Increasing-Chord Paths and Trees

A straight-line drawing $Γ$ of a graph $G=(V,E)$ is a drawing of $G$ in the Euclidean plane, where every vertex in $G$ is mapped to a distinct point, and every edge in $G$ is mapped to a straight line segment between their endpoints. A path $P$ in $Γ$ is called increasing-chord if for every four points (not necessarily vertices) $a,b,c,d$ on $P$ in this order, the Euclidean distance between $b,c$ is at most the Euclidean distance between $a,d$. A spanning tree $T$ rooted at some vertex $r$ in $Γ$ is called increasing-chord if $T$ contains an increasing-chord path from $r$ to every vertex in $T$. In this paper we prove that given a vertex $r$ in a straight-line drawing $Γ$, it is NP-complete to determine whether $Γ$ contains an increasing-chord spanning tree rooted at $r$. We conjecture that finding an increasing-chord path between a pair of vertices in $Γ$, which is an intriguing open problem posed by Alamdari et al., is also NP-complete, and show a (non-polynomial) reduction from the 3-SAT problem.

cs.CG↗

arXiv2017

On Compatible Triangulations with a Minimum Number of Steiner Points

Two vertex-labelled polygons are \emph{compatible} if they have the same clockwise cyclic ordering of vertices. The definition extends to polygonal regions (polygons with holes) and to triangulations---for every face, the clockwise cyclic order of vertices on the boundary must be the same. It is known that every pair of compatible $n$-vertex polygonal regions can be extended to compatible triangulations by adding $O(n^2)$ Steiner points. Furthermore, $Ω(n^2)$ Steiner points are sometimes necessary, even for a pair of polygons. Compatible triangulations provide piecewise linear homeomorphisms and are also a crucial first step in morphing planar graph drawings, aka "2D shape animation". An intriguing open question, first posed by Aronov, Seidel, and Souvaine in 1993, is to decide if two compatible polygons have compatible triangulations with at most $k$ Steiner points. In this paper we prove the problem to be NP-hard for polygons with holes. The question remains open for simple polygons.

cs.CG↗

arXiv2017

On the Planar Split Thickness of Graphs

Motivated by applications in graph drawing and information visualization, we examine the planar split thickness of a graph, that is, the smallest $k$ such that the graph is $k$-splittable into a planar graph. A $k$-split operation substitutes a vertex $v$ by at most $k$ new vertices such that each neighbor of $v$ is connected to at least one of the new vertices. We first examine the planar split thickness of complete graphs, complete bipartite graphs, multipartite graphs, bounded degree graphs, and genus-1 graphs. We then prove that it is NP-hard to recognize graphs that are $2$-splittable into a planar graph, and show that one can approximate the planar split thickness of a graph within a constant factor. If the treewidth is bounded, then we can even verify $k$-splittability in linear time, for a constant $k$.

math.CO↗

arXiv2016

Relating Graph Thickness to Planar Layers and Bend Complexity

The thickness of a graph $G=(V,E)$ with $n$ vertices is the minimum number of planar subgraphs of $G$ whose union is $G$. A polyline drawing of $G$ in $\mathbb{R}^2$ is a drawing $Γ$ of $G$, where each vertex is mapped to a point and each edge is mapped to a polygonal chain. Bend and layer complexities are two important aesthetics of such a drawing. The bend complexity of $Γ$ is the maximum number of bends per edge in $Γ$, and the layer complexity of $Γ$ is the minimum integer $r$ such that the set of polygonal chains in $Γ$ can be partitioned into $r$ disjoint sets, where each set corresponds to a planar polyline drawing. Let $G$ be a graph of thickness $t$. By Fáry's theorem, if $t=1$, then $G$ can be drawn on a single layer with bend complexity $0$. A few extensions to higher thickness are known, e.g., if $t=2$ (resp., $t>2$), then $G$ can be drawn on $t$ layers with bend complexity 2 (resp., $3n+O(1)$). However, allowing a higher number of layers may reduce the bend complexity, e.g., complete graphs require $Θ(n)$ layers to be drawn using 0 bends per edge. In this paper we present an elegant extension of Fáry's theorem to draw graphs of thickness $t>2$. We first prove that thickness-$t$ graphs can be drawn on $t$ layers with $2.25n+O(1)$ bends per edge. We then develop another technique to draw thickness-$t$ graphs on $t$ layers with bend complexity, i.e., $O(\sqrt{2}^{t} \cdot n^{1-(1/β)})$, where $β= 2^{\lceil (t-2)/2 \rceil }$. Previously, the bend complexity was not known to be sublinear for $t>2$. Finally, we show that graphs with linear arboricity $k$ can be drawn on $k$ layers with bend complexity $\frac{3(k-1)n}{(4k-2)}$.

cs.CG↗