arXiv subjects

Debanuj Chatterjee

Publications and source records attributed to Debanuj Chatterjee.

9 recordsLinked to original sources

arXiv2026

Fiber-based electro-optic dual-comb light source for fast linear and nonlinear spectroscopy

Dual-comb spectroscopy (DCS) enables rapid, broadband and high-resolution optical measurements by mapping optical spectra into the radio frequency (RF) domain. However, conventional DCS systems are fundamentally constrained by a tradeoff between optical bandwidth and interferogram acquisition speed, limiting their overall performance. Here, we demonstrate an all-fiber, polarization-maintaining (PM) frequency-agile electro-optic modulation (EOM) dual-comb source that simultaneously achieves a broad optical bandwidth of 10 THz and a high interferogram acquisition speed of up to 2.5 MHz. The high acquisition rate is enabled through an in-phase/quadrature (IQ) modulator-based architecture to shift the carrier frequency of one of the combs. We illustrate the performance of the source through proof-of-concept linear spectroscopy and nonlinear dual-comb coherent anti-Stokes Raman scattering (CARS) spectroscopy measurements. The combination of large spectral coverage, high refresh rate and an all-PM fiber configuration makes this dual-comb platform attractive for applications such as rapid molecular spectroscopy and high-speed nonlinear spectroscopic imaging.

physics.optics↗

arXiv2026

Three-core fiber Fabry-Perot resonator for dual-frequency comb generation

Fiber Fabry-Perot resonators have proven their ability to generate broad and stable optical frequency combs, and are ideal devices for fiber systems as they are high-Q, compact, and easily integrated with FC/PC connectors. Here, we present an advanced fiber Fabry-Perot resonator designed for multi-frequency comb generation and spatial multiplexing. The resonator is fabricated using a three-core optical fiber and is able to generate two mutually coherent frequency combs while being locked to a driving laser. Multiplexing of the combs is achieved with a fan-in/fan-out system, enabling a fully fiber-based experimental setup. The generated combs, induced by cavity solitons, feature a 1.27 GHz repetition rate and a bandwidth above 40 nm. A slight difference in the group index of each core leads to a 112 kHz repetition rate offset between the combs, enabling dual-comb spectroscopy proof-of-concept measurement of a 0.1 nm absorption band.

physics.optics↗

arXiv2025

Real-Time Electro-Optic Dual Comb Detection of Ultrasound Waves

High-resolution ultrasound based imaging techniques like photoacoustic (PA) imaging that require fast detection of acoustic waves, are often coupled with an opto-mechanical sensor like a Fabry-Perot cavity (FPC) for enhanced sensitivity at high frequency. Due to the inherent inhomogeneity of the FPC thickness, the resonance of the cavity can exhibit a spatial distribution, requiring dynamic adjustment of the interrogation wavelength when raster-scanning the sensor with a probe beam. To avoid this, we propose in this work the use of an electro-optically modulated dual-comb light source for rapid acoustic wave sensing within a specified bandwidth. Utilizing a dual-comb vibrometry approach, we demonstrated a proof-of-principle of the technique, with real-time detection of 10 MHz acoustic waves simultaneously with three different teeth (separated by 10 GHz) of the dual-frequency comb, achieving a 20 ns temporal resolution. We also investigated the system's sensitivity limit in terms of the strength of the detected acoustic waves, opening new possibilities for ultrafast PA imaging modalities.

physics.optics↗

arXiv2025

Dual-Frequency Comb in Fiber Fabry-Perot Resonator

This paper presents a novel approach to dual-frequency comb generation utilizing a single fiber Fabry-Perot resonator, advancing the implementation of these sources in fiber-based systems. Dual-comb applications such as spectroscopy, ranging, and imaging, known for their high-resolution and rapid data acquisition capabilities, benefit significantly from the stability and coherence of optical frequency comb sources. Our method leverages the birefringent property of the resonator induced by the optical fiber to generate two orthogonally polarized optical frequency combs in a monolitic resonator. This approach allows for the generation of two different frequency combs with slightly different repetition rates, exhibiting excellent mutual coherence, making it highly relevant for dual-comb applications. The 40 nm bandwidth generated combs are induced by switching-waves in a normal dispersion fiber Fabry-Perot resonator. These comb types have the advantage of being easily generated by a pulse pumping scheme, which is employed in this study. Finally, the potential of the source is demonstrated by a proof-of-concept spectroscopy measurement.

physics.optics↗

arXiv2024

Generation of Tunable Correlated Frequency Comb via Four-Wave-Mixing in Optical fibers

We report an all-fiber-based experimental setup to generate a correlated photon-pair comb using Four Wave Mixing (FWM) in Highly Non-Linear Fiber (HNLF). Temporal correlations of the generated photons were confirmed through coincidence measurements. We observed a maximum of 32 kcps, with a coincidence to accidental ratio of 17$\pm$1. To further understand the underlying processes, we also simulated a generalized FWM event involving the interaction between an arbitrary frequency comb and a Continuous Wave (CW) pump. Non-linear dynamics through the HNLF were modelled using Schr\"odinger propagation equations, with numerical predictions agreeing with our experimental results.

quant-ph↗

arXiv2020

Generalised expression of the noise figure of phase sensitive amplifiers for an arbitrary number of modes

Phase sensitive amplifiers (PSA), contrary to usual phase insensitive amplifiers (PIA), are in principle capable to achieve noiseless amplification, i.e. exhibit a quantum-limited noise figure (NF) of 0 dB. When implemented using four-wave mixing (FWM) in a nonlinear fiber, extra waves can be generated by undesired FWM processes, which may introduce extra input ports for vacuum fluctuations, thus potentially degrading the NF. In this situation, we give here a general analytical quantum derivation of the PSA NF, valid for an arbitrary number of nonlinearly coupled modes. This expression is usable as soon as a linear input-output relation can be found for the annihilation and creation operators of the involved modes. It predicts that the noise level depends on the number of interacting waves. We illustrate the usefulness of this expression in the case of six waves, corresponding to four interacting quantum modes. In this example the signal NF is degraded by 0.4 dB, compared to 10 dB obtained for PIA operation of the same scheme.

quant-ph↗

arXiv2020

Investigation of analog signal distortion introduced by a fiber phase sensitive amplifier

We numerically simulate the distortion of an analog signal carried in a microwave photonics link containing a phase sensitive amplifier (PSA), focusing mainly on amplitude modulation format. The numerical model is validated by comparison with experimental measurements. By using the well known two-tone test, we compare the situations in which a standard intensity modulator is used with the one where a perfectly linear modulator would be employed. We also investigate the role of gain saturation on the nonlinearity of the PSA. Finally, we establish the conditions, in which the signal nonlinearity introduced by the PSA itself can be extremely small.

eess.SP↗

arXiv2020

Investigation of the noise figure in degenerate dual-pump phase sensitive amplifier using a multi-wave model

A semi-classical 7-wave model is developed to investigate the noise performances of a degenerate dual-pump phase sensitive amplifier. This approach takes into account the transfer to the signal, through multiple four-wave mixing processes, of the vacuum fluctuations injected in the high-order waves. This effect leads to a degradation of the noise figure of the amplifier with respect to the 0 dB value predicted by the usual 3-wave model. However, it is proved that a careful choice of the fiber dispersion allows to use the high-order waves to enhance the signal gain without degrading the noise figure above 1 dB.

physics.optics↗

arXiv2018

Phase evolution of the direct detection noise figure of a nondegenerate fiber phase sensitive amplifier

We experimentally investigate the evolution of the direct detection noise figure of a non degenerate phase sensitive amplifier based on nonlinear fiber, as a function of the relative phase between the signal, idler, and pump, all other parameters remaining fixed. The use of a fiber with a high stimulated Brillouin scattering threshold permits to investigate the full range of phase sensitive gain and noise figure without pump dithering. Good agreement is found with theory, both for signal only and combined signal and idler direct detections.

physics.optics↗