arXiv subjects

Denis Garoli

Publications and source records attributed to Denis Garoli.

At least 55 records · Page 3Linked to original sources

arXiv2020

Ultrafast all-optical switching enabled by epsilon-near-zero modes in metal-insulator nanocavities

Ultrafast control of light-matter interactions constitutes a crucial feature in view of new technological frontiers of information processing. However, conventional optical elements are either static or feature switching speeds that are extremely low with respect to the timescales at which it is possible to control light. Here, we exploit high-quality-factor engineered epsilon-near-zero (ENZ) modes of a metal-insulator-metal nanocavity to realize an all-optical ultrafast modulation of the reflectance of light at a tailored wavelength. Our approach is based on the presence of the two, spectrally separated, ENZ absorption resonances of the cavity. Optical pumping of the system at its high energy ENZ mode leads to a strong red-shift of the low energy mode because of the transient increase of the local dielectric function, which leads to a sub-3-ps control of the reflectance at a specific wavelength with a relative modulation depth approaching 120%.

physics.optics↗

arXiv2020

lambda DNA through a plasmonic nanopore What can be detected by means of Surface Enhanced Raman Scattering?

Engineered electromagnetic fields in plasmonic nanopores enable enhanced optical detection and their use in single molecule sequencing. Here, a plasmonic nanopore prepared in a thick nanoporous film is used to investigate the interaction between the metal and a long-chain double strand DNA molecule. We discuss how the matrix of nanoporous metal can interact with the molecule thanks to: i) transient aspecific interactions between the porous surface and DNA and ii) optical forces exerted by the localized field in a metallic nanostructure. A duration of interaction up to tens of milliseconds enables to collect high signal-to-noise Raman vibrations allowing an easy label-free reading of information from the DNA molecule. Moreover, in order to further increase the event of detection rate, we tested a polymeric porous hydrogel placed beneath the solid-state membrane. This approach enables a slowdown of the molecule diffusion, thus increasing the number of detected interactions by a factor of about 20.

physics.app-ph↗

arXiv2019

SERS discrimination of single amino acid residue in single peptide by plasmonic nanocavities

Surface-enhanced Raman spectroscopy (SERS) is a sensitive label-free optical method that can provide fingerprint Raman spectra of biomolecules such as DNA, amino acids and proteins. While SERS of single DNA molecule has been recently demonstrated, Raman analysis of single protein sequence was not possible because the SERS spectra of proteins are usually dominated by signals of aromatic amino acid residues. Here, we used electroplasmonic approach to trap single gold nanoparticle in a nanohole for generating a plasmonic nanocavity between the trapped nanoparticle and the nanopore wall. The giant field generated in the nanocavity was so sensitive and localized that it enables SERS discrimination of 10 distinct amino acids at single-molecule level. The obtained spectra are used to analyze the spectra of 2 biomarkers (Vasopressin and Oxytocin) made of a short sequence of 9 amino-acids. Significantly, we demonstrated identification of single non-aromatic amino acid residues in a single short peptide chain as well as discrimination between two peptides with sequences distinguishable in 2 specific amino-acids. Our result demonstrate the high sensitivity of our method to identify single amino acid residue in a protein chain and a potential for further applications in proteomics and single-protein sequencing.

q-bio.QM↗

arXiv2019

Galvanic Replacement Reaction to prepare nanoporous Aluminum for UV plasmonics

Plasmonics applications have been extending into the ultraviolet region of the electromagnetic spectrum. Unfortunately the commonly used noble metals have intrinsic optical properties that limit their use above 350 nm. Aluminum is probably the most suitable material for UV plasmonics and in this work we show that nanoporous aluminum can be prepared starting from an alloy of Mg3Al2. The porous metal is obtained by means of a galvanic replacement reaction. Such a nanoporous metal can be exploited to achieve a plasmonic material for enhanced UV Raman spectroscopy and fluorescence. Thanks to the large surface to volume ratio this material represents a powerful platform for promoting interaction between plasmonic substrates and molecules in the UV.

physics.app-ph↗

arXiv2019

Electrophoretic deposition of WS2 flakes on nanoholes arrays. Role of the used suspension medium

Here we optimized the electrophoretic deposition process for the fabrication of WS2 plasmonic nanohole integrated structures. We showed how the conditions used for the site selective deposition influenced the properties of the deposited flakes. In particular, we investigated the effect of different suspension medium used during the deposition both in the efficiency of the process and in the stability of WS2 flakes, which were deposited on a ordered arrays of plasmonic nanostructures.

cond-mat.mtrl-sci↗

arXiv2019

3D Nanoporous Antennas for high sensitivity IR plasmonic sensing

Nanoporous gold can be exploited as plasmonic material for enhanced spectroscopy both in the visible and in the near infrared spectral regions. In particular, with respect to bulk metal it presents interesting optical properties in the infrared where it presents a significantly higher field confinement with respect to conventional materials. This latter can be exploited to achieve extremely high sensitivity to the environment conditions, hence realizing interesting sensors. Here we compare the sensitivity of a plasmonic resonators made of nanoporous gold with a similar structures made of bulk metal. The experimental test of the enhanced sensitivity was performed by depositing the same stoichiometric quantity of dielectric material onto the two considered structures. The result, also confirmed by the biosensing of a short peptide, can be ascribed to the better field confinement and enhancement in porous metal. This suggests an application of nanoporous 3D structures as sensor platform in the near-infrared with sensitivity over 4.000 nm/RIU.

physics.app-ph↗

arXiv2019

Nanoparticles manipulation in 3D nanotips excited with plasmonic vortex

Recent advances in nanotechnologies have prompted the need for tools to accurately and non invasively manipulate individual nanoobjects. Among the possible strategies, optical forces have been widely used to enable nano optical tweezers capable of trapping or moving a specimen with unprecedented accuracy. Here, we propose an architecture consisting of a nanotip excited with a plasmonic vortex enabling effective dynamical control of nanoparticles in three dimensions. The optical field generated by the structure can be used to manipulate single dielectric nanoparticles acting on the total angular momentum of light used to illuminate the structure. We demonstrate that it is possible to stably trap or force the beaming of the particle from specific points, thus enabling a new platform for nanoparticle manipulation and sorting.

physics.optics↗

arXiv2019

Chemically-controlled self-assembly of hybrid plasmonic nanopores on graphene

Thanks to the spontaneous interaction between noble metals and biological scaffolds, nanomaterials with unique features can be achieved following relatively straightforward and cost-efficient synthetic procedures. Here, plasmonic silver nanorings are synthesized on a ring-like Peroxiredoxin (PRX) protein and used to assemble large arrays of functional nanostructures. The PRX protein drives the seeding growth of metal silver under wet reducing conditions, yielding nanorings with outer and inner diameters down to 28 and 3 nm, respectively. The obtained hybrid nanostructures can be deposited onto a solid-state membrane in order to prepare plasmonic nanopores. In particular, the interaction between graphene and PRX allows for the simple preparation of ordered arrays of plasmonic nanorings on a 2D-material membrane. This fabrication process can be finalized by drilling a nanometer scale pore in the middle of the ring. Fluorescence spectroscopic measurements have been used to demonstrate the plasmonic enhancement induced by the metallic ring. Finally, we support the experimental findings with some numerical simulations showing that the nanorings are endowed with a remarkable plasmonic field within the cavity. Our results represent a proof of concept of a fabrication process that could be suitable for nanopore-based technologies such as next-generation sequencing and single-molecule detection.

physics.app-ph↗

arXiv2019

Hybrid Metal-Dielectric Plasmonic Zero Mode Waveguide for Enhanced Single Molecule Detection

We fabricated hybrid metal-dielectric nanoantennas and measured their optical response at three different wavelengths. The nanostructure is fabricated on a bilayer film formed by the sequential deposition of silicon and gold on a transparent substrate. The optical characterization is done via fluorescence measurements. We characterized the fluorescence enhancement, as well as the lifetime and detection volume reduction for each wavelength. We observe that the hybrid metal-dielectric nanoantennas behave as enhanced Zero Mode Waveguides in the near-infrared spectral region. Their detection volume is such that they can perform enhanced single-molecule detection at tens of microM. However, a wavelength blue-shift of 40 nm dramatically decreases the performance of the nanoantennas. We compared their behavior with that of a golden ZMW, and we verified that the dielectric silicon layer improves the design. We interpreted the experimental observations with the help of numerical simulations. In addition, the simulations showed that the field enhancement of the structure highly depends on the incoming beam: tightly focused beams yield lower field enhancements than plane-waves.

physics.app-ph↗

arXiv2019

Nanoporous Aluminum-Magnesium Alloy for UV enhanced spectroscopy

We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experimentally demonstrate its efficacy in enhancing fluorescence and surface Raman scattering for excitation wavelengths of 360 nm and 257 nm respectively. Finally, we numerically show the superior performance of the nanoporous Al-Mg alloy in the UV range when compared to equivalent porous gold structures. The large area to surface ratio provided by this material make it a promising platform for a wide range of applications in UV/deep-UV plasmonics.

physics.app-ph↗

arXiv2019

Single-molecule DNA Bases Discrimination in Oligonucleotides by Controllable Trapping in Plasmonic Nanoholes

Surface-enhanced Raman spectroscopy (SERS) sensing of DNA sequences by plasmonic nanopores could pave a way to new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. However, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not sufficient for single-molecule analysis. In this work, we report an approach to control the time that molecules reside in the hot spot by physically adsorbing them onto a gold nanoparticle and then trapping the single nanoparticle in a plasmonic nanohole. By trapping the nanoparticle for up to minutes, we demonstrate single-molecule SERS detection of all 4 DNA bases as well as discrimination of single nucleobases in a single oligonucleotide. Our method can be extended easily to label-free sensing of single-molecule amino acids and proteins.

physics.optics↗

arXiv2019

Switchable two-state plasmonic tweezers for dynamic manipulation of nano-objects

In this work we present a plasmonic platform capable of trapping nano-objects as small as 100 nm in two different spatial configurations. The switch between the two trapping states, localized on the tip and on the outer wall of a vertical gold nanochannel, can be activated by a variation in the focusing position of the excitation laser along the main axis of the nanotube. We show that the trapping mechanism is facilitated by both an electromagnetic and thermal action. The inner and outer trapping states are respectively characterized by a static and a dynamic behavior and their stiffness was measured by analyzing the position of the trapped specimens as a function of time. In addition, it was demonstrated that the stiffness of the static state is high enough to trap of particles as small as 40nm. These results show a simple, controllable way to generate a switchable two-state trapping regime, which could find applications as a model for the study of dynamic trapping or as mechanism for the development of nanofluidic devices.

physics.app-ph↗

arXiv2019

Pump-probe Spectroscopy Study of Ultrafast Temperature Dynamics in Nanoporous Gold

We explore the influence of the nanoporous structure on the thermal relaxation of electrons and holes excited by ultrashort laser pulses ($\sim 7$ fs) in thin gold films. Plasmon decay into hot electron-hole pairs results in the generation of a Fermi-Dirac distribution thermalized at a temperature $T_{\mathrm{e}}$ higher than the lattice temperature $T_{\mathrm{l}}$. The relaxation times of the energy exchange between electrons and lattice, here measured by pump-probe spectroscopy, is slowed down by the nanoporous structure, resulting in much higher peak $T_{\mathrm{e}}$ than for bulk gold films. The electron-phonon coupling constant and the Debye temperature are found to scale with the metal filling factor $f$ and a two-temperature model reproduces the data. The results open the way for electron temperature control in metals by engineering of the nanoporous geometry.

cond-mat.mtrl-sci↗

arXiv2018

Surface Thermal Gradients Activated by Enhanced Molecular Absorption in Mid-infrared Vertical Antenna Arrays

We investigate local heat generation by molecules at the apex of polymer-embedded vertical antennas excited at resonant mid-infrared wavelengths, exploiting the surface enhanced infrared absorption (SEIRA) effect. The embedding of vertical nanoantennas in a non-absorbing polymer creates thermal isolation between the apical hotspot, the locus of heat generation, and the heat sink represented by the substrate. Vibrational mid-infrared absorption by strongly absorbing molecules located at the antenna apex then generates nanoscale temperature gradients at the surface. We imaged the thermal gradients by using a nano-photothermal expansion microscope, and we found values up to 10 K/microm in conditions where the radiation wavelength resonates with both the molecule vibrations and the plasmonic mode of the antennas. Values up to 1000 K/microm can be foreseen at maximum quantum cascade laser power. The presented system provides a promising thermoplasmonic platform for antenna-assisted thermophoresis and resonant mid-infrared photocatalysis.

physics.app-ph↗

arXiv2018

Site-selective functionalization of plasmonic nanopores for enhanced fluorescence and Förster Resonance Energy Transfer

In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with one or more fluorescent dyes. Using an easy and robust fabrication method, we manage to build single plasmonic rings on top of dielectric nanotubes with different inner diameters. The modulation of the dimension of the nanopores allows us to both tailor their field confinement and their Purcell Factor in the visible spectral range. In order to investigate how the changes in geometry influence the fluorescence emission efficiency, thiol-conjugated dyes are anchored on the plasmonic ring, thus forming a functional nanopore. We study the lifetime of ATTO 520 and ATTO 590 attached in two different configurations: single dye, and FRET pair. For the single dye configuration, we observe that the lifetime of both single dyes decreases as the size of the nanopore is reduced. The smallest nanopores yield an experimental Purcell Factor of 6. For the FRET pair configuration, we measure two regimes. For large nanopore sizes, the FRET efficiency remains constant. Whereas for smaller sizes, the FRET efficiency increases from 30 up to 45% with a decrease of the nanopore size. These findings, which have been also supported by numerical simulations, may open new pathways to engineer the energy transfer in plasmonic nanopores with potential applications in photonics and biosensing, in particular in single-molecule detection towards sequencing.

physics.optics↗

arXiv2018

Controlled integration of MoS2 flakes on nanopores by means of electrophoretic deposition

We propose an easy and robust strategy for the versatile integration of 2D material flakes on plasmonic nanoholes by means of controlled deposition of MoS2 via electrophoretic process. The method can be applied both to simple metallic flat nanostructures and to complex 3D metallic structures both comprising nanoholes. The deposition method allows the decoration of large ordered arrays of plasmonic structures with single or few layers of MoS2. We show that the plasmonic field generated by the nanohole can interact significantly with the 2D layer, thus representing an ideal system for hybrid 2D-Material/Plasmonic investigation. The controlled and ordered integration of 2D materials on plasmonic nanostructures opens a pathway towards, for instance, enhanced light emission; strong coupling from plasmonic hybrid structures; hot electron generation; and sensors based on 2D materials.

physics.app-ph↗

arXiv2018

Hybrid plasmonic nanostructures based on controlled integration of MoS2 flakes on metallic nanoholes

Here, we propose an easy and robust strategy for the versatile preparation of hybrid plasmonic nanopores by means of controlled deposition of single flakes of MoS2 directly on top of metallic holes. The device is realized on silicon nitride commercial membranes and can be further refined by TEM or FIB milling to achieve the passing of molecules or nanometric particles through a pore. Importantly, we show that the plasmonic enhancement provided by the nanohole is strongly accumulated in the 2D nanopore, thus representing an ideal system for single-molecule sensing and sequencing in a flow-through configuration. Here, we also demonstrate that the prepared 2D material can be decorated with metallic nanoparticles that can couple their resonance with the nanopore resonance to further enhance the electromagnetic field confinement at the nanoscale level. This method can be applied to any gold nanopore with a high level of reproducibility and parallelization; hence, it can pave the way to the next generation of solid-state nanopores with plasmonic functionalities. Moreover, the controlled/ordered integration of 2D materials on plasmonic nanostructures opens a pathway towards new investigation of the following: enhanced light emission; strong coupling from plasmonic hybrid structures; hot electron generation; and sensors in general based on 2D materials. Nanopore

physics.app-ph↗

arXiv2018

MIM Structure for optical vortex beam generator at nanoscale level

Optical beams carrying orbital angular momentum (OAM) can find tremendous applications in several fields. In order to apply these particular beams in photonic integrated devices innovative optical elements have been proposed. Here we are interested in the generation of OAM-carrying beams at the nanoscale level. We design and experimentally demonstrate a plasmonic optical vortex emitter, based on a metal-insulator-metal holey plasmonic vortex lens. Our plasmonic element is shown to convert impinging circularly polarized light to an orbital angular momentum state capable of propagating to the far-field. Moreover, the emerging OAM can be externally adjusted by switching the handedness of the incident light polarization. The device has a radius of few micrometers and the OAM beam is generated from subwavelength aperture. The fabrication of integrated arrays of PVLs and the possible simultaneous emission of multiple optical vortices provide an easy way to the large-scale integration of optical vortex emitters for wide-ranging applications.

physics.optics↗