arXiv subjects

Derek Davis

Publications and source records attributed to Derek Davis.

28 records · Page 2Linked to original sources

arXiv2022

The curious case of GW200129: interplay between spin-precession inference and data-quality issues

Measurement of spin-precession in black hole binary mergers observed with gravitational waves is an exciting milestone as it relates to both general relativistic dynamics and astrophysical binary formation scenarios. In this study, we revisit the evidence for spin-precession in GW200129 and localize its origin to data in LIGO Livingston in the 20--50\,Hz frequency range where the signal amplitude is lower than expected from a non-precessing binary given all the other data. These data are subject to known data quality issues as a glitch was subtracted from the detector's strain data. The lack of evidence for spin-precession in LIGO Hanford leads to a noticeable inconsistency between the inferred binary mass ratio and precessing spin in the two LIGO detectors, something not expected from solely different Gaussian noise realizations. We revisit the LIGO Livingston glitch mitigation and show that the difference between a spin-precessing and a non-precessing interpretation for GW200129 is smaller than the statistical and systematic uncertainty of the glitch subtraction, finding that the support for spin-precession depends sensitively on the glitch modeling. We also investigate the signal-to-noise ratio $\sim7$ trigger in the less sensitive Virgo detector. Though not influencing the spin-precession studies, the Virgo trigger is grossly inconsistent with the ones in LIGO Hanford and LIGO Livingston as it points to a much heavier system. We interpret the Virgo data in the context of further data quality issues. While our results do not disprove the presence of spin-precession in GW200129, we argue that any such inference is contingent upon the statistical and systematic uncertainty of the glitch mitigation. Our study highlights the role of data quality investigations when inferring subtle effects such as spin-precession for short signals such as the ones produced by high-mass systems.

gr-qc↗

arXiv2022

Mitigating the effects of instrumental artifacts on source localizations

Instrumental artifacts in gravitational-wave strain data can overlap with gravitational-wave detections and significantly impair the accuracy of the measured source localizations. These biases can prevent the detection of any electromagnetic counterparts to the detected gravitational wave. We present a method to mitigate the effect of instrumental artifacts on the measured source localization. This method uses inpainting techniques to remove data containing the instrumental artifact and then correcting for the data removal in the subsequent analysis of the data. We present a series of simulations using this method using a variety of signal classes and inpainting parameters which test the effectiveness of this method and identify potential limitations. We show that in the vast majority of scenarios, this method can robustly localize gravitational-wave signals even after removing portions of the data. We also demonstrate how an instrumental artifact can bias the measured source location and how this method can be used to mitigate this bias.

astro-ph.IM↗

arXiv2022

Accurate modeling and mitigation of overlapping signals and glitches in gravitational-wave data

The increasing sensitivity of gravitational-wave detectors has brought about an increase in the rate of astrophysical signal detections as well as the rate of "glitches"; transient and non-Gaussian detector noise. Temporal overlap of signals and glitches in the detector presents a challenge for inference analyses that typically assume the presence of only Gaussian detector noise. In this study we perform an extensive exploration of the efficacy of a recently proposed method that models the glitch with sine-Gaussian wavelets while simultaneously modeling the signal with compact-binary waveform templates. We explore a wide range of glitch families and signal morphologies and demonstrate that the joint modeling of glitches and signals (with wavelets and templates respectively) can reliably separate the two. We find that the glitches that most affect parameter estimation are also the glitches that are well modeled by such wavelets due to their compact time-frequency signature. As a further test, we investigate the robustness of this analysis against waveform systematics like those arising from the exclusion of higher-order modes and spin-precession effects. Our analysis provides an estimate of the signal parameters; the glitch waveform to be subtracted from the data; and an assessment of whether some detected excess power consists of a glitch, signal, or both. We analyze the low-significance triggers (191225_215715 and 200114_020818) and find that they are both consistent with glitches overlapping high-mass signals.

gr-qc↗

arXiv2022

Science-Driven Tunable Design of Cosmic Explorer Detectors

Ground-based gravitational-wave detectors like Cosmic Explorer can be tuned to improve their sensitivity at high or low frequencies by tuning the response of the signal extraction cavity. Enhanced sensitivity above 2 kHz enables measurements of the post-merger gravitational-wave spectrum from binary neutron star mergers, which depends critically on the unknown equation of state of hot, ultra-dense matter. Improved sensitivity below 500 Hz favors precision tests of extreme gravity with black hole ringdown signals and improves the detection prospects while facilitating an improved measurement of source properties for compact binary inspirals at cosmological distances. At intermediate frequencies, a more sensitive detector can better measure the tidal properties of neutron stars. We present and characterize the performance of tuned Cosmic Explorer configurations that are designed to optimize detections across different astrophysical source populations. These tuning options give Cosmic Explorer the flexibility to target a diverse set of science goals with the same detector infrastructure. We find that a 40 km Cosmic Explorer detector outperforms a 20 km in all key science goals other than access to post-merger physics. This suggests that Cosmic Explorer should include at least one 40 km facility.

gr-qc↗

arXiv2022

Impact of noise transients on low latency gravitational-wave event localisation

Gravitational-wave (GW) data contains non-Gaussian noise transients called "glitches". During the third LIGO-Virgo observing run about 24% of all gravitational-wave candidates were in the vicinity of a glitch, while even more events could be affected in future observing runs due to increasing detector sensitivity. This poses a problem since glitches can affect the estimation of GW source parameters, including sky localisation, which is crucial to identify an electromagnetic (EM) counterpart. In this paper we present a study that estimates how much sky localisation is affected by a nearby glitch in low latency. We injected binary black hole (BBH), binary neutron star (BNS) and neutron star-black hole (NSBH) signals into data containing three different classes of glitches: blips, thunderstorms and fast scatterings. The impact of these glitches was assessed by estimating the number of tile pointings that a telescope would need to search over until the true sky location of an event is observed. We found that blip glitches affect the localisation of BBH mergers the most; in the most extreme cases a BBH event is completely missed even by a 20 deg$^2$ field-of-view (FOV) telescope. Thunderstorm glitches have the biggest impact on BBH and NSBH events, especially if there is no third interferometer, while BNS events appear to be not affected. Fast scattering glitches impact low latency localisation only for NSBH signals. For two-interferometer network small (FOV=1 deg$^2$) and large (FOV=20 deg$^2$) telescopes are affected, whereas three-interferometer localisation bias is small enough not to affect large (FOV=20 deg$^2$) telescopes.

astro-ph.HE↗

arXiv2022

Incorporating information from LIGO data quality streams into the PyCBC search for gravitational waves

We present a new method which accounts for changes in the properties of gravitational-wave detector noise over time in the PyCBC search for gravitational waves from compact binary coalescences. We use information from LIGO data quality streams that monitor the status of each detector and its environment to model changes in the rate of noise in each detector. These data quality streams allow candidates identified in the data during periods of detector malfunctions to be more efficiently rejected as noise. This method allows data from machine learning predictions of the detector state to be included as part of the PyCBC search, increasing the the total number of detectable gravitational-wave signals by up to 5%. When both machine learning classifications and manually-generated flags are used to search data from LIGO-Virgo's third observing run, the total number of detectable gravitational-wave signals is increased by up to 20% compared to not using any data quality streams. We also show how this method is flexible enough to include information from large numbers of additional arbitrary data streams that may be able to further increase the sensitivity of the search.

gr-qc↗

arXiv2021

Point absorbers in Advanced LIGO

Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.

physics.ins-det↗

arXiv2020

Utilizing aLIGO Glitch Classifications to Validate Gravitational-Wave Candidates

Advanced LIGO data contains numerous noise transients, or "glitches", that have been shown to reduce the sensitivity of matched filter searches for gravitational waves from compact binaries by increasing the rate at which random coincidences occur. The presence of these transients has precipitated extensive work to establish that observed gravitational wave events are astrophysical in nature. We discuss the response of the PyCBC search for gravitational waves from stellar mass binaries to various common glitches that were observed during Advanced LIGO's first and second observing runs. We show how these transients can mimic waveforms from compact binary coalescences and quantify the likelihood that a given class of glitches will create a trigger in the search pipeline. We explore the specific waveform parameters that are most similar to different glitch classes and demonstrate how knowledge of these similarities can be used when evaluating the significance of gravitational-wave candidates.

gr-qc↗

arXiv2019

Blip glitches in Advanced LIGO data

Blip glitches are short noise transients present in data from ground-based gravitational-wave observatories. These glitches resemble the gravitational-wave signature of massive binary black hole mergers. Hence, the sensitivity of transient gravitational-wave searches to such high-mass systems and other potential short duration sources is degraded by the presence of blip glitches. The origin and rate of occurrence of this type of glitch have been largely unknown. In this paper we explore the population of blip glitches in Advanced LIGO during its first and second observing runs. On average, we find that Advanced LIGO data contains approximately two blip glitches per hour of data. We identify four subsets of blip glitches correlated with detector auxiliary or environmental sensor channels, however the physical causes of the majority of blips remain unclear.

physics.ins-det↗

arXiv2018

PyCBC Live: Rapid Detection of Gravitational Waves from Compact Binary Mergers

We introduce an efficient and straightforward technique for rapidly detecting gravitational waves from compact binary mergers. We show that this method achieves the low latencies required to alert electromagnetic partners of candidate binary mergers, aids in data monitoring, and makes use of multidetector networks for sky localization. This approach was instrumental to the analysis of gravitational-wave candidates during the second observing run of Advanced LIGO, including the period of coincident operation with Advanced Virgo, and in particular the analysis of the first observed binary neutron star merger GW170817, where it led to the first tightly localized sky map ($31~\mathrm{deg}^2$) used to identify AT 2017gfo. Operation of this analysis also enabled the initial discovery of GW170104 and GW170608 despite non-nominal observing of the instrument.

gr-qc↗