arXiv subjects

Derrick Wing Kwan Ng

Publications and source records attributed to Derrick Wing Kwan Ng.

At least 235 records · Page 13Linked to original sources

arXiv2021

Integrated Sensing and Communication-assisted Orthogonal Time Frequency Space Transmission for Vehicular Networks

Orthogonal time frequency space (OTFS) modulation is a promising candidate for supporting reliable information transmission in high-mobility vehicular networks. In this paper, we consider the employment of the integrated (radar) sensing and communication (ISAC) technique for assisting OTFS transmission in both uplink and downlink vehicular communication systems. Benefiting from the OTFS-ISAC signals, the roadside unit (RSU) is capable of simultaneously transmitting downlink information to the vehicles and estimating the sensing parameters of vehicles, e.g., locations and speeds, based on the reflected echoes. Then, relying on the estimated kinematic parameters of vehicles, the RSU can construct the topology of the vehicular network that enables the prediction of the vehicle states in the following time instant. Consequently, the RSU can effectively formulate the transmit downlink beamformers according to the predicted parameters to counteract the channel adversity such that the vehicles can directly detect the information without the need of performing channel estimation. As for the uplink transmission, the RSU can infer the delays and Dopplers associated with different channel paths based on the aforementioned dynamic topology of the vehicular network. Thus, inserting guard space as in conventional methods are not needed for uplink channel estimation which removes the required training overhead. Finally, an efficient uplink detector is proposed by taking into account the channel estimation uncertainty. Through numerical simulations, we demonstrate the benefits of the proposed ISAC-assisted OTFS transmission scheme.

eess.SP↗

arXiv2021

Deep Learning-Empowered Predictive Beamforming for IRS-Assisted Multi-User Communications

The realization of practical intelligent reflecting surface (IRS)-assisted multi-user communication (IRS-MUC) systems critically depends on the proper beamforming design exploiting accurate channel state information (CSI). However, channel estimation (CE) in IRS-MUC systems requires a significantly large training overhead due to the numerous reflection elements involved in IRS. In this paper, we adopt a deep learning approach to implicitly learn the historical channel features and directly predict the IRS phase shifts for the next time slot to maximize the average achievable sum-rate of an IRS-MUC system taking into account the user mobility. By doing this, only a low-dimension multiple-input single-output (MISO) CE is needed for transmit beamforming design, thus significantly reducing the CE overhead. To this end, a location-aware convolutional long short-term memory network (LA-CLNet) is first developed to facilitate predictive beamforming at IRS, where the convolutional and recurrent units are jointly adopted to exploit both the spatial and temporal features of channels simultaneously. Given the predictive IRS phase shift beamforming, an instantaneous CSI (ICSI)-aware fully-connected neural network (IA-FNN) is then proposed to optimize the transmit beamforming matrix at the access point. Simulation results demonstrate that the sum-rate performance achieved by the proposed method approaches that of the genie-aided scheme with the full perfect ICSI.

cs.IT↗

arXiv2021

Probabilistic Accumulate-then-Transmit in Wireless-Powered Covert Communications

In this paper, we investigate the optimal design of a wireless-powered covert communication (WP-CC) system, in which a probabilistic accumulate-then-transmit (ATT) protocol is proposed to maximize the communication covertness subject to a quality-of-service (QoS) requirement on communication. Specifically, in the considered WP-CC system, a full-duplex (FD) receiver transmits artificial noise (AN) to simultaneously charge an energy-constrained transmitter and to confuse a warden's detection on the transmitter's communication activity. With the probabilistic ATT protocol, the transmitter sends its information with a prior probability, i.e., $p$, conditioned on the available energy being sufficient. Our analysis shows that the probabilistic ATT protocol can achieve higher covertness than the traditional ATT protocol with $p=1$. In order to facilitate the optimal design of the WP-CC system, we also derive the warden's minimum detection error probability and characterize the effective covert rate from the transmitter to the receiver to quantify the communication covertness and quality, respectively. The derived analytical results facilitate the joint optimization of the probability $p$ and the information transmit power. We further present the optimal design of a cable-powered covert communication (CP-CC) system as a benchmark for comparison. Our simulation shows that the proposed probabilistic ATT protocol (with a varying $p$) can achieve the covertness upper bound determined by the CP-CC system, while the traditional ATT protocol (with $p=1$) cannot, which again confirms the benefits brought by the proposed probabilistic ATT in covert communications.

cs.IT↗

arXiv2021

Optimal Transmission of Multi-Quality Tiled 360 VR Video in MIMO-OFDMA Systems

In this paper, we study the optimal transmission of a multi-quality tiled 360 virtual reality (VR) video from a multi-antenna server (e.g., access point or base station) to multiple single-antenna users in a multiple-input multiple-output (MIMO)-orthogonal frequency division multiple access (OFDMA) system. We minimize the total transmission power with respect to the subcarrier allocation constraints, rate allocation constraints, and successful transmission constraints, by optimizing the beamforming vector and subcarrier, transmission power and rate allocation. The formulated resource allocation problem is a challenging mixed discrete-continuous optimization problem. We obtain an asymptotically optimal solution in the case of a large antenna array, and a suboptimal solution in the general case. As far as we know, this is the first work providing optimization-based design for 360 VR video transmission in MIMO-OFDMA systems. Finally, by numerical results, we show that the proposed solutions achieve significant improvement in performance compared to the existing solutions.

cs.MM↗

arXiv2021

Power-Efficient Wireless Streaming of Multi-Quality Tiled 360 VR Video in MIMO-OFDMA Systems

In this paper, we study the optimal wireless streaming of a multi-quality tiled 360 virtual reality (VR) video from a multi-antenna server to multiple single-antenna users in a multiple-input multiple-output (MIMO)-orthogonal frequency division multiple access (OFDMA) system. In the scenario without user transcoding, we jointly optimize beamforming and subcarrier, transmission power, and rate allocation to minimize the total transmission power. This problem is a challenging mixed discretecontinuous optimization problem. We obtain a globally optimal solution for small multicast groups, an asymptotically optimal solution for a large antenna array, and a suboptimal solution for the general case. In the scenario with user transcoding, we jointly optimize the quality level selection, beamforming, and subcarrier, transmission power, and rate allocation to minimize the weighted sum of the average total transmission power and the transcoding power. This problem is a two-timescale mixed discrete-continuous optimization problem, which is even more challenging than the problem for the scenario without user transcoding. We obtain a globally optimal solution for small multicast groups, an asymptotically optimal solution for a large antenna array, and a low-complexity suboptimal solution for the general case. Finally, numerical results demonstrate the significant gains of proposed solutions over the existing solutions. significant gains of proposed solutions over the existing solutions.

eess.SP↗

arXiv2021

Physical Layer Security Enhancement With Reconfigurable Intelligent Surface-Aided Networks

Reconfigurable intelligent surface (RIS)-aided wireless communications have drawn significant attention recently. We study the physical layer security of the downlink RIS-aided transmission framework for randomly located users in the presence of a multi-antenna eavesdropper. To show the advantages of RIS-aided networks, we consider two practical scenarios: Communication with and without RIS. In both cases, we apply the stochastic geometry theory to derive exact probability density function (PDF) and cumulative distribution function (CDF) of the received signal-to-interference-plus-noise ratio. Furthermore, the obtained PDF and CDF are exploited to evaluate important security performance of wireless communication including the secrecy outage probability, the probability of nonzero secrecy capacity, and the average secrecy rate. Monte-Carlo simulations are subsequently conducted to validate the accuracy of our analytical results. Compared with traditional MIMO systems, the RIS-aided system offers better performance in terms of physical layer security. In particular, the security performance is improved significantly by increasing the number of reflecting elements equipped in a RIS. However, adopting RIS equipped with a small number of reflecting elements cannot improve the system performance when the path loss of NLoS is small.

cs.IT↗

arXiv2021

Optimal Resource Allocation Design for Large IRS-Assisted SWIPT Systems: A Scalable Optimization Framework

In this paper, we study the optimal resource allocation algorithm design for large intelligent reflecting surface (IRS)-assisted simultaneous wireless information and power transfer (SWIPT) systems. To facilitate efficient system design for large IRSs, instead of jointly optimizing all the IRS elements, we partition the IRS into several tiles and employ a scalable optimization framework comprising an offline design stage and an online optimization stage. In the offline stage, the IRS elements of each tile are jointly designed to support a set of different phase shift configurations, referred to as transmission modes, while the best transmission mode is selected from the set for each tile in the online stage. Given a transmission mode set, we aim to minimize the total base station (BS) transmit power by jointly optimizing the beamforming and the transmission mode selection policy taking into account the quality-of-service requirements of information decoding and non-linear energy harvesting receivers, respectively. Although the resource allocation algorithm design is formulated as a non-convex combinatorial optimization problem, we solve it optimally by applying the branch-and-bound (BnB) approach which entails a high computational complexity. To strike a balance between optimality and computational complexity, we also develop an efficient suboptimal algorithm capitalizing on the penalty method and successive convex approximation. Our simulation results show that the proposed designs enable considerable power savings compared to several baseline schemes. Moreover, our results reveal that by properly adjusting the numbers of tiles and transmission modes, the proposed scalable optimization framework indeed facilitates online design for large IRSs.

cs.IT↗

arXiv2021

Max-Min Fair Energy-Efficient Beamforming Design for Intelligent Reflecting Surface-Aided SWIPT Systems with Non-linear Energy Harvesting Model

This paper considers an intelligent reflecting sur-face (IRS)-aided simultaneous wireless information and power transfer (SWIPT) network, where multiple users decode data and harvest energy from the transmitted signal of a transmit-ter. The proposed design framework exploits the cost-effective IRS to establish favorable communication environment to improve the fair energy efficient. In particular, we study the max-min energy efficiency (EE) of the system by jointly designing the transmit information and energy beamforming at the base station (BS), phase shifts at the IRS, as well as the power splitting (PS) ratio at all users subject to the minimum rate, minimum harvested energy, and transmit power constraints. The formulated problem is non-convex and thus challenging to be solved. We propose two algorithms namely penalty-based and inner approximation (IA)-based to handle the non-convexity of the optimization problem. As such, we divide the original problem into two sub-problems and apply the alternating optimization (AO) algorithm for both proposed algorithms to handle it iteratively. In particular, in the penalty-based algorithm for the first sub-problem, the semi-definite relaxation (SDR) technique, difference of convex functions (DC) programming, majorization-minimization (MM) approach, and fractional programming theory are exploited to transform the non-convex optimization problem into a convex form that can be addressed efficiently. For the second sub-problem, a penalty-based approach is proposed to handle the optimization on the phase shifts introduced by the IRS with the proposed algorithms. For the IA-based method, we optimize jointly beamforming vectors and phase shifts while the PS ratio is solved optimally in the first sub-problem...

cs.IT↗

arXiv2021

Smart and Reconfigurable Wireless Communications: From IRS Modeling to Algorithm Design

Intelligent reflecting surfaces (IRSs) have been introduced into wireless communications systems due to their great potential to smartly customize and reconfigure radio propagation environments in a cost-effective manner. Despite the promising advantages of IRSs, academic research on IRSs is still in its infancy. In particular, the design and analysis of IRS-assisted wireless communication systems critically depend on an accurate and tractable modeling of the IRS. In this article, we first present and compare three IRS models, namely the conventional independent diffusive scatterer-based model, physics-based model, and impedance network-based model, in terms of their accuracy, tractability, and hardware complexity. Besides, a new framework based on partitioning the IRS into tiles and employing codebooks of transmission modes is introduced to enable scalable IRS optimization. Then, we investigate the impact of the three considered IRS models on system design, where several crucial technical challenges for the efficient design of IRS-assisted wireless systems are identified and the corresponding solutions are unraveled. Furthermore, to illustrate the properties of the considered models and the efficiency of the proposed solution concepts, IRS-assisted secure wireless systems and simultaneous wireless information and power transfer (SWIPT) systems are studied in more detail. Finally, several promising future research directions for IRS-assisted wireless systems are highlighted.

cs.IT↗

arXiv2021

Terahertz Ultra-Massive MIMO-Based Aeronautical Communications in Space-Air-Ground Integrated Networks

The emerging space-air-ground integrated network has attracted intensive research and necessitates reliable and efficient aeronautical communications. This paper investigates terahertz Ultra-Massive (UM)-MIMO-based aeronautical communications and proposes an effective channel estimation and tracking scheme, which can solve the performance degradation problem caused by the unique {\emph{triple delay-beam-Doppler squint effects}} of aeronautical terahertz UM-MIMO channels. Specifically, based on the rough angle estimates acquired from navigation information, an initial aeronautical link is established, where the delay-beam squint at transceiver can be significantly mitigated by employing a Grouping True-Time Delay Unit (GTTDU) module (e.g., the designed {\emph{Rotman lens}}-based GTTDU module). According to the proposed prior-aided iterative angle estimation algorithm, azimuth/elevation angles can be estimated, and these angles are adopted to achieve precise beam-alignment and refine GTTDU module for further eliminating delay-beam squint. Doppler shifts can be subsequently estimated using the proposed prior-aided iterative Doppler shift estimation algorithm. On this basis, path delays and channel gains can be estimated accurately, where the Doppler squint can be effectively attenuated via compensation process. For data transmission, a data-aided decision-directed based channel tracking algorithm is developed to track the beam-aligned effective channels. When the data-aided channel tracking is invalid, angles will be re-estimated at the pilot-aided channel tracking stage with an equivalent sparse digital array, where angle ambiguity can be resolved based on the previously estimated angles. The simulation results and the derived Cramér-Rao lower bounds verify the effectiveness of our solution.

cs.IT↗

arXiv2021

Performance Analysis and Window Design for Channel Estimation of OTFS Modulation

In this paper, we investigate the impacts of transmitter and receiver windows on orthogonal time-frequency space (OTFS) modulation and propose a window design to improve the OTFS channel estimation performance. Assuming ideal pulse shaping filters at the transceiver, we first identify the role of window in effective channel and the reduced channel sparsity with conventional rectangular window. Then, we characterize the impacts of windowing on the effective channel estimation performance for OTFS modulation. Based on the revealed insights, we propose to apply a Dolph-Chebyshev (DC) window at either the transmitter or the receiver to effectively enhance the sparsity of the effective channel. As such, the channel spread due to the fractional Doppler is significantly reduced, which leads to a lower error floor in channel estimation compared with that of the rectangular window. Simulation results verify the accuracy of the obtained analytical results and confirm the superiority of the proposed window designs in improving the channel estimation performance over the conventional rectangular or Sine windows.

cs.IT↗

arXiv2021

Off-grid Channel Estimation with Sparse Bayesian Learning for OTFS Systems

This paper proposes an off-grid channel estimation scheme for orthogonal time-frequency space (OTFS) systems adopting the sparse Bayesian learning (SBL) framework. To avoid channel spreading caused by the fractional delay and Doppler shifts and to fully exploit the channel sparsity in the delay-Doppler (DD) domain, we estimate the original DD domain channel response rather than the effective DD domain channel response as commonly adopted in the literature. OTFS channel estimation is first formulated as a one-dimensional (1D) off-grid sparse signal recovery (SSR) problem based on a virtual sampling grid defined in the DD space, where the on-grid and off-grid components of the delay and Doppler shifts are separated for estimation. In particular, the on-grid components of the delay and Doppler shifts are jointly determined by the entry indices with significant values in the recovered sparse vector. Then, the corresponding off-grid components are modeled as hyper-parameters in the proposed SBL framework, which can be estimated via the expectation-maximization method. To strike a balance between channel estimation performance and computational complexity, we further propose a two-dimensional (2D) off-grid SSR problem via decoupling the delay and Doppler shift estimations. In our developed 1D and 2D off-grid SBL-based channel estimation algorithms, the hyper-parameters are updated alternatively for computing the conditional posterior distribution of channels, which can be exploited to reconstruct the effective DD domain channel. Compared with the 1D method, the proposed 2D method enjoys a much lower computational complexity while only suffers slight performance degradation. Simulation results verify the superior performance of the proposed channel estimation schemes over state-of-the-art schemes.

cs.IT↗

arXiv2020

Deep Residual Network Empowered Channel Estimation for IRS-Assisted Multi-User Communication Systems

Channel estimation is of great importance in realizing practical intelligent reflecting surface-assisted multi-user communication (IRS-MC) systems. However, different from traditional communication systems, an IRS-MC system generally involves a cascaded channel with a sophisticated statistical distribution, which hinders the implementations of the Bayesian estimators. To further improve the channel estimation performance, in this paper, we model the channel estimation as a denoising problem and adopt a data-driven approach to realize the channel estimation. Specifically, we propose a convolutional neural network (CNN)-based deep residual network (CDRN) to implicitly learn the residual noise for recovering the channel coefficients from the noisy pilot-based observations. In the proposed CDRN, a CNN denoising block equipped with an element-wise subtraction structure is designed to exploit both the spatial features of the noisy channel matrices and the additive nature of the noise simultaneously, which further improves the estimation accuracy. Simulation results demonstrate that the proposed method can almost achieve the same estimation accuracy as that of the optimal minimum mean square error (MMSE) estimator requiring the knowledge of the channel distribution.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface-Aided Joint Processing Coordinated Multipoint Transmission

This paper investigates intelligent reflecting surface (IRS)-aided multicell wireless networks, where an IRS is deployed to assist the joint processing coordinated multipoint (JP-CoMP) transmission from multiple base stations (BSs) to multiple cell-edge users. By taking into account the fairness among cell-edge users, we aim at maximizing the minimum achievable rate of cell-edge users by jointly optimizing the transmit beamforming at the BSs and the phase shifts at the IRS. As a compromise approach, we transform the non-convex max-min problem into an equivalent form based on the mean-square error method, which facilities the design of an efficient suboptimal iterative algorithm. In addition, we investigate two scenarios, namely the single-user system and the multiuser system. For the former scenario, the optimal transmit beamforming is obtained based on the dual subgradient method, while the phase shift matrix is optimized based on the Majorization-Minimization method. For the latter scenario, the transmit beamforming matrix and phase shift matrix are obtained by the second-order cone programming and semidefinite relaxation techniques, respectively. Numerical results demonstrate the significant performance improvement achieved by deploying an IRS. Furthermore, the proposed JP-CoMP design significantly outperforms the conventional coordinated scheduling/coordinated beamforming coordinated multipoint (CS/CB-CoMP) design in terms of max-min rate.

cs.IT↗

arXiv2020

Cooperative Activity Detection: Sourced and Unsourced Massive Random Access Paradigms

This paper investigates the issue of cooperative activity detection for grant-free random access in the sixth-generation (6G) cell-free wireless networks with sourced and unsourced paradigms. First, we propose a cooperative framework for solving the problem of device activity detection in sourced random access. In particular, multiple access points (APs) cooperatively detect the device activity via exchanging low-dimensional intermediate information with their neighbors. This is enabled by the proposed covariance-based algorithm via exploiting both the sparsity-promoting and similarity-promoting terms of the device state vectors among neighboring APs. A decentralized approximate separating approach is introduced based on the forward-backward splitting strategy for addressing the formulated problem. Then, the proposed activity detection algorithm is adopted as a decoder of cooperative unsourced random access, where the multiple APs cooperatively detect the list of transmitted messages regardless of the identity of the transmitting devices. Finally, we provide sufficient conditions on the step sizes that ensure the convergence of the proposed algorithm in the sense of Bregman divergence. Simulation results show that the proposed algorithm is efficient for addressing both sourced and unsourced massive random access problems, while requires a shorter signature sequence and accommodates a significantly larger number of active devices with a reasonable antenna array size, compared with the state-of-art algorithms.

cs.IT↗

arXiv2020

Energy Efficiency and Spectral Efficiency Tradeoff in RIS-Aided Multiuser MIMO Uplink Transmission

The emergence of reconfigurable intelligent surfaces (RISs) enables us to establish programmable radio wave propagation that caters for wireless communications, via employing low-cost passive reflecting units. This work studies the non-trivial tradeoff between energy efficiency (EE) and spectral efficiency (SE) in multiuser multiple-input multiple-output (MIMO) uplink communications aided by a RIS equipped with discrete phase shifters. For reducing the required signaling overhead and energy consumption, our transmission strategy design is based on the partial channel state information (CSI), including the statistical CSI between the RIS and user terminals (UTs) and the instantaneous CSI between the RIS and the base station. To investigate the EE-SE tradeoff, we develop a framework for the joint optimization of UTs' transmit precoding and RIS reflective beamforming to maximize a performance metric called resource efficiency (RE). For the design of UT's precoding, it is simplified into the design of UTs' transmit powers with the aid of the closed-form solutions of UTs' optimal transmit directions. To avoid the high complexity in computing the nested integrals involved in the expectations, we derive an asymptotic deterministic objective expression. For the design of the RIS phases, an iterative mean-square error minimization approach is proposed via capitalizing on the homotopy, accelerated projected gradient, and majorization-minimization methods. Numerical results illustrate the effectiveness and rapid convergence rate of our proposed optimization framework.

cs.IT↗

arXiv2020

Deep Transfer Learning for Signal Detection in Ambient Backscatter Communications

Tag signal detection is one of the key tasks in ambient backscatter communication (AmBC) systems. However, obtaining perfect channel state information (CSI) is challenging and costly, which makes AmBC systems suffer from a high bit error rate (BER). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of channel and directly recover tag symbols. To this end, we develop a DTL detection framework which consists of offline learning, transfer learning, and online detection. Specifically, a DTL-based likelihood ratio test (DTL-LRT) is derived based on the minimum error probability (MEP) criterion. As a realization of the developed framework, we then apply convolutional neural networks (CNN) to intelligently explore the features of the sample covariance matrix, which facilitates the design of a CNN-based algorithm for tag signal detection. Exploiting the powerful capability of CNN in extracting features of data in the matrix formation, the proposed method is able to further improve the system performance. In addition, an asymptotic explicit expression is also derived to characterize the properties of the proposed CNN-based method when the number of samples is sufficiently large. Finally, extensive simulation results demonstrate that the BER performance of the proposed method is comparable to that of the optimal detection method with perfect CSI.

eess.SP↗

arXiv2020

IRS-Assisted Green Communication Systems: Provable Convergence and Robust Optimization

Intelligent reflecting surfaces (IRSs) are regarded as a key enabler of green wireless communication, due to their capability of customizing favorable wireless propagation environments. In this paper, we investigate resource allocation for IRS-assisted green multiuser multiple-input single-output (MISO) systems. To minimize the total transmit power, both the beamforming vectors at the access point (AP) and the phase shifts at multiple IRSs are jointly optimized, while taking into account the minimum required quality-of-service (QoS) of multiple users. First, two novel algorithms, namely a penalty-based alternating minimization (AltMin) algorithm and an inner approximation (IA) algorithm, are developed to tackle the non-convexity of the formulated optimization problem when perfect channel state information (CSI) is available. Unlike existing designs that cannot ensure convergence, the proposed penalty-based AltMin and IA algorithms are guaranteed to converge to a stationary point and a Karush-Kuhn-Tucker (KKT) solution of the design problem, respectively. Second, the impact of imperfect knowledge of the CSI of the channels between the AP and the users is investigated. To this end, a non-convex robust optimization problem is formulated and the penalty-based AltMin algorithm is extended to obtain a stationary solution. Simulation results reveal a key trade-off between the speed of convergence and the achievable total transmit power for the two proposed algorithms. In addition, we show that the proposed algorithms can significantly reduce the total transmit power at the AP compared to various baseline schemes and that the optimal numbers of transmit antennas and IRS reflecting elements, which minimize the total power consumption of the considered system, are finite.

cs.IT↗