arXiv subjects

Desiree Della Monica Ferreira

Publications and source records attributed to Desiree Della Monica Ferreira.

6 recordsLinked to original sources

arXiv2026

EXPO: a quantum leap in fast, wide-band X-ray polarimetry for astrophysics

The Enhanced X-ray Polarimetry Observatory (EXPO) is a mission concept proposed to ESA as an M8 candidate, with a prospective launch in 2041. Building on the scientific success of IXPE, EXPO is designed to overcome its two main limitations, the narrow 2-8 keV energy band and the very slow repointing time, and to enable new scientific capabilities. A wide energy band and fast repointing are essential for investigating the hard X-ray emission of magnetars and black-hole binaries, particle acceleration in supernova remnants and pulsar-wind nebulae, radiative transfer in highly magnetized plasmas, X-ray reflection in accretion flows and active galactic nuclei, and the prompt and afterglow emission of gamma-ray bursts and magnetar flares. EXPO comprises five focusing X-ray telescopes and gas photoelectric polarimeters based on the Timepix ASIC family with InGrid amplification, enabling three-dimensional track imaging and operation in the 2-35 keV band through optimized low- and medium-energy detector configurations. The mirror modules use proven electroformed nickel technology with Au-C coatings and an XMM-like focal length of 7.5 m. The polarimeters are complemented by a coded-mask Wide Field Instrument (WFI), derived from SVOM/ECLAIRs for continuous monitoring of a 2 sr field of view; a Spectral Imaging Camera (SIC), based on stacked CMOS and CdTe detectors for broadband imaging spectroscopy and accurate spectro-polarimetric decomposition; and an Instrument Control Unit (ICU) for payload management, onboard WFI image reconstruction, transient identification, and autonomous spacecraft repointing requests. These capabilities extend X-ray polarimetry into the hard X-ray domain and open a new observational window on fast transients, time-domain astrophysics, and multi-messenger astronomy.

astro-ph.IM↗

arXiv2026

Overview and design optimization of a custom hybrid X-ray telescope for the International Axion Observatory (IAXO)

We present the design optimization for maximizing the effective area of a custom X-ray optic for the International Axion Observatory (IAXO) and BabyIAXO, including its novel hybrid configuration that enables full coverage of the 700-mm-diameter magnetic bore with minimal stress imposed on the mirrors; shell layout optimized for axion spectra and spatial distribution; and the coating recipes that enhance reflectivity in the energy range of interest. We evaluate how these design choices improve the observation signal-to-noise ratio (SNR) of BabyIAXO and IAXO by calculating the broad-band effective area and simulating the point spread function (PSF) and focal spot at the detector plane. The cost-effective and scalable optic offers an energy response from 0.03--15 keV, achieving an effective area that exceeds 2400 cm$^2$ near 1 keV - the peak of the ABC axion spectrum - and remains above 1700 cm$^2$ around 3 keV - the peak of the Primakoff axion spectrum. It yields a half-power diameter (HPD) of $\sim 46^{\prime\prime}$ for an on-axis point source at infinity, and a focal-spot HPD of $\sim 120^{\prime\prime}$ for the radial distribution expected for axion signals within the approximately $3^{\prime}$-radius solar core. A relatively generous fabrication-error budget is also summarized. The custom optic, accounting for fabrication errors, is anticipated to deliver a more than $55$-fold enhancement in the SNR.

physics.ins-det↗

arXiv2026

Fabrication status and expected performance of the inner-core X-ray optic for BabyIAXO

BabyIAXO, a pathfinder for the International Axion Observatory (IAXO), is designed to demonstrate all key technologies at scale while achieving an improvement in sensitivity over the recent CERN Axion Solar Telescope (CAST) experiment by approximately a factor of five. Such improvement is enabled by the X-ray optics, which allow for maintaining a high signal-to-noise ratio at the detector despite a cross-sectional area of the magnetic bore being over 250 times larger than that of CAST. The optic employs a hybrid design consisting of co-aligned inner core and outer corona optics that share a common optical axis and vacuum vessel but differ in focal length and manufacturing approach. Both are segmented glass optics, with the inner core fabricated from thermally slumped borosilicate glass and the outer corona from cold-slumped Corning Willow glass. To fabricate the inner-core optic, leveraging techniques developed for NuSTAR and HEFT optics, we reoptimized and streamlined the thermal-forming procedure. The quality of free-standing glass substrates was characterized by laser metrology, X-ray reflectometry, and atomic force microscopy. We developed a cutting technique that produces smooth edges at the micron scale. We used flat stacks of glass-epoxy-graphite layers to evaluate the performance of the epoxy bondline. The optic is expected to achieve an on-axis point spread function (PSF) with a half-power diameter (HPD) of < 90", enhancing the signal-to-noise ratio by more than 55 times.

physics.ins-det↗

arXiv2026

A Neutron Microscope Using a Nested Wolter-I Condenser and a Bank of Diffractive-Refractive Achromatic Objectives

We propose a nested Wolter-I mirror design for a neutron condenser, which is based on established X-ray telescope technology. We demonstrate through simulations that it can increase the flux density at the ESS imaging instrument ODIN by up to two orders of magnitude. Experimental measurements of reflectivity and figure errors on a prototype mirror element confirm the technical feasibility of the approach. Then, we discuss design strategies for an imaging objective to fully exploit the condenser specifications while achieving spatial resolutions comparable to those of X-ray micro-CT instruments. Analytically, we show that for monochromatic beams suitable solutions exist employing arrays of hundreds of identical objectives, realized either as compound refractive lenses (CRLs) or Fresnel zone plates (FZPs). To mitigate the inherent chromatic aberration of these optics, each individual objective could be replaced by an achromatic FZP/CRL combination. Key optical properties of the resulting microscope are estimated. This novel full-field microscopy concept for highly divergent, polychromatic neutron beams has the potential to improve temporal and spatial resolution for large samples and sample environments and to enable the simultaneous acquisition of hundreds of projections in neutron tomography.

physics.ins-det↗

arXiv2008

Resolving the discrepancy between lensing and X-ray mass estimates of the complex galaxy cluster Abell 1689

There is a long-standing discrepancy between galaxy cluster masses determined from X-ray and gravitational lensing observations of which Abell 1689 is a well-studied example. In this work we take advantage of 180 ks of Chandra X-ray observations and a new weak gravitational study based on a Hubble Space Telescope mosaic covering the central 1.8 Mpc x 1.4 Mpc to eliminate the mass discrepancy. In contrast to earlier X-ray analyses where the very circular surface brightness has been inferred as Abell 1689 being spherically symmetric and in hydrostatic equilibrium, a hardness ratio map analysis reveals a regular and symmetric appearing main clump with a cool core plus some substructure in the North Eastern part of the cluster. The gravitational lensing mass model supports the interpretation of Abell 1689 being composed of a main clump, which is possibly a virialized cluster, plus some substructure. In order to avoid complications and mis-interpretations due to X-ray emission from the substructure, we exclude it from the mass reconstruction. Comparing X-ray and lensing mass profiles of the regular main part only, shows no significant discrepancy between the two methods and the obtained mass profiles are consistent over the full range where the mass can be reconstructed from X-rays (out to approx. 1 Mpc). The obtained cluster mass within approx. 875 kpc derived from X-rays alone is 6.4 plus/minus 2.1 x 10^14 solar masses compared to a weak lensing mass of 8.6 plus/minus 3.0 x 10^14 solar masses within the same radius.

astro-ph↗

arXiv2007

Spatially resolved properties of the GRB 060505 host: implications for the nature of the progenitor

GRB 060505 was the first well-observed nearby possible long-duration GRB that had no associated supernova. Here we present spatially resolved spectra of the host galaxy of GRB 060505, an Sbc spiral, at redshift z=0.0889. The GRB occurred inside a star-forming region in the northern spiral arm at 6.5 kpc from the center. From the position of the emission lines, we determine a maximum rotational velocity for the galaxy of v~212km/s corresponding to a mass of 1.14x10^11 M_solar within 11 kpc from the center. By fitting single-age spectral synthesis models to the stellar continuum, we derive a very young age for the GRB site, confirmed by photometric and Halpha line measurements, of around 6 Myr which corresponds to the lifetime of a 32 M_solar star. The metallicity derived from several emission line measurements is lowest at the GRB site with 1/5 Z_solar but roughly solar in the rest of the galaxy. Using the 2dF galaxy redshift survey we can locate the host galaxy in its large scale (Mpc) environment. The galaxy lies in the foreground of a filamentary overdensity extending south west from the galaxy cluster Abell 3837 at z=0.0896. The properties of the GRB site are similar to those found for other long-duration GRB host galaxies with high specific star formation rate and low metallicity, which is an indication that GRB 060505 originated from a young massive star that died without making a supernova.

astro-ph↗