arXiv subjects

Detlef Lohse

Publications and source records attributed to Detlef Lohse.

At least 397 records · Page 22Linked to original sources

arXiv2010

Building water bridges in air: Electrohydrodynamics of the Floating Water Bridge

The interaction of electrical fields and liquids can lead to phenomena that defies intuition. Some famous examples can be found in Electrohydrodynamics as Taylor cones, whipping jets or non-coalescing drops. A less famous example is the Floating Water Bridge: a slender thread of water held between two glass beakers in which a high voltage difference is applied. Surprisingly, the water bridge defies gravity even when the beakers are separated at distances up to 2 cm. In the presentation, experimental measurements and simple models are proposed and discussed for the stability of the bridge and the source of the flow, revealing an important role of polarization forces on the stability of the water bridge. On the other hand, the observed flow can only be explained due to the non negligible free charge present in the surface. In this sense, the Floating Water Bridge can be considered as an extreme case of a leaky dielectric liquid (J. R. Melcher and G. I. Taylor, Annu. Rev. Fluid Mech., 1:111, 1969).

physics.flu-dyn↗

arXiv2010

Wetting Splashing

We present fluid dynamics videos illustrating wetting splashing-produced by water drop impact onto hydrophobic microstructures at high impact velocity ($\sim 3$ ms$^{-1}$). The substrate consists of regular and transparent microtextures in square or hexagonal lattice, yielding a high contact angle of $\sim 150 ^\circ$. Our high speed top-or-bottom view recordings through the transparent surface shed light on the solid-liquid-air interfaces at impact. Despite the superhydrophobicity of the latticed micropillars (of a periodicity of $10 μm), water droplet wets a certain central area and moreover entraps an air bubble beneath the droplet. Besides the central wet area, lamella surf on air splashing outward at high impinging velocity. The effects of micropatterns and air pressure on the impact outcome are also examined. We show that microscopic boundary condition, imposed by the solid texture, profoundly influences the macroscopic flow dynamics upon superhydrophobic surfaces at high impinging velocity. In addition, the intervening air between the liquid and the solid plays a crucial role in directional splash, which can be eliminated by a reduced air pressure.

physics.flu-dyn↗

arXiv2010

Avalanche of particles in evaporating coffee drops

The pioneering work of Deegan et al. [Nature 389, (1997)] showed how a drying sessile droplet suspension of particles presents a maximum evaporating flux at its contact line which drags liquid and particles creating the well known coffee stain ring. In this Fluid Dynamics Video, measurements using micro Particle Image Velocimetry and Particle Tracking clearly show an avalanche of particles being dragged in the last moments, for vanishing contact angles and droplet height. This explains the different characteristic packing of the particles in the layers of the ring: the outer one resembles a crystalline array, while the inner one looks more like a jammed granular fluid. Using the basic hydrodynamic model used by Deegan et al. [Phys. Rev. E 62, (2000)] it will be shown how the liquid radial velocity diverges as the droplet life comes to an end, yielding a good comparison with the experimental data.

physics.flu-dyn↗

arXiv2010

How micropatterns and air pressure affect splashing on surfaces

We experimentally investigate the splashing mechanism of a millimeter-sized ethanol drop impinging on a structured solid surface, comprised of micro-pillars, through side-view and top-view high speed imaging. By increasing the impact velocity we can tune the impact outcome from a gentle deposition to a violent splash, at which tiny droplets are emitted as the liquid sheet spreads laterally. We measure the splashing threshold for different micropatterns and find that the arrangement of the pillars significantly affects the splashing outcome. In particular, directional splashing in direction in which air flow through pattern is possible. Our top-view observations of impact dynamics reveal that an trapped air is responsible for the splashing. Indeed by lowering the pressure of the surrounding air we show that we can suppress the splashing in the explored parameter regime.

physics.flu-dyn↗

arXiv2010

Drag and lift forces on a counter-rotating cylinder in rotating flow

Results are reported of an experimental investigation into the motion of a heavy cylinder free to move inside a water-filled drum rotating around a horizontal axis. The cylinder is observed to either co- or, counter intuitively, counter-rotate with respect to the rotating drum. The flow was measured with particle image velocimetry (PIV), and it was found that the inner cylinder significantly altered the bulk flow field from the solid-body rotation found for a fluid filled drum. In the counter-rotation case, the generated lift force allowed the cylinder to freely rotate without contact with the drum wall. Drag and lift coefficients of the freely counter-rotating cylinder were measured over a wide range of Reynolds numbers, 2,500 $<$ Re $<$ 25,000, dimensionless rotation rates, 0.0$ < α< $1.2, and gap to cylinder diameter ratios 0.003 $< G/2a <$ 0.5. Drag coefficients were consistent with previous measurements on a cylinder in a uniform flow. However, for the lift coefficient considerable larger values were observed in the present measurements. We found the enhancement of the lift force to be mainly caused by the vicinity of the wall.

physics.flu-dyn↗

arXiv2010

Boundary layers in rotating weakly turbulent Rayleigh-Benard convection

The effect of rotation on the boundary layers (BLs) in a Rayleigh-Benard (RB) system at a relatively low Rayleigh number, i.e. $Ra = 4\times10^7$, is studied for different Pr by direct numerical simulations and the results are compared with laminar BL theory. In this regime we find a smooth onset of the heat transfer enhancement as function of increasing rotation rate. We study this regime in detail and introduce a model based on the Grossmann-Lohse theory to describe the heat transfer enhancement as function of the rotation rate for this relatively low Ra number regime and weak background rotation $Ro\gtrsim 1$. The smooth onset of heat transfer enhancement observed here is in contrast to the sharp onset observed at larger $Ra \gtrsim 10^8$ by Stevens {\it{et al.}} [Phys. Rev. Lett. {\bf{103}}, 024503, 2009], although only a small shift in the Ra-Ro-Pr phase space is involved.

physics.flu-dyn↗

arXiv2010

Prandtl-Blasius temperature and velocity boundary layer profiles in turbulent Rayleigh-Bénard convection

The shape of velocity and temperature profiles near the horizontal conducting plates in turbulent Rayleigh-Bénard convection are studied numerically and experimentally over the Rayleigh number range $10^8\lesssim Ra\lesssim3\times10^{11}$ and the Prandtl number range $0.7\lesssim Pr\lesssim5.4$. The results show that both the temperature and velocity profiles well agree with the classical Prandtl-Blasius laminar boundary-layer profiles, if they are re-sampled in the respective dynamical reference frames that fluctuate with the instantaneous thermal and velocity boundary-layer thicknesses.

physics.flu-dyn↗

arXiv2010

Supersonic Air Flow due to Solid-Liquid Impact

A solid object impacting on liquid creates a liquid jet due to the collapse of the impact cavity. Using visualization experiments with smoke particles and multiscale simulations we show that in addition a high-speed air-jet is pushed out of the cavity. Despite an impact velocity of only 1 m/s, this air-jet attains \emph{supersonic} speeds already when the cavity is slightly larger than 1 mm in diameter. The structure of the air flow resembles closely that of compressible flow through a nozzle -- with the key difference that here the "nozzle" is a \emph{liquid} cavity shrinking rapidly in time.

physics.flu-dyn↗

arXiv2009

Optimal Prandtl number for heat transfer in rotating Rayleigh-Benard convection

Numerical data for the heat transfer as a function of the Prandtl (Pr) and Rossby (Ro) numbers in turbulent rotating Rayleigh-Benard convection are presented for Rayleigh number Ra = 10^8. When Ro is fixed the heat transfer enhancement with respect to the non-rotating value shows a maximum as function of Pr. This maximum is due to the reduced efficiency of Ekman pumping when Pr becomes too small or too large. When Pr becomes small, i.e. for large thermal diffusivity, the heat that is carried by the vertical vortices spreads out in the middle of the cell, and Ekman pumping thus becomes less efficient. For higher Pr the thermal boundary layers (BLs) are thinner than the kinetic BLs and therefore the Ekman vortices do not reach the thermal BL. This means that the fluid that is sucked into the vertical vortices is colder than for lower Pr which limits the efficiency of the upwards heat transfer.

physics.flu-dyn↗

arXiv2009

Velocity gradients statistics along particle trajectories in turbulent flows: the refined similarity hypothesis in the Lagrangian frame

We present an investigation of the statistics of velocity gradient related quantities, in particluar energy dissipation rate and enstrophy, along the trajectories of fluid tracers and of heavy/light particles advected by a homogeneous and isotropic turbulent flow. The Refined Similarity Hypothesis (RSH) proposed by Kolmogorov and Oboukhov in 1962 is rephrased in the Lagrangian context and then tested along the particle trajectories. The study is performed on state-of-the-art numerical data resulting from numerical simulations up to Re~400 with 2048^3 collocation points. When particles have small inertia, we show that the Lagrangian formulation of the RSH is well verified for time lags larger than the typical response time of the particle. In contrast, in the large inertia limit when the particle response time approaches the integral-time-scale of the flow, particles behave nearly ballistic, and the Eulerian formulation of RSH holds in the inertial-range.

physics.flu-dyn↗

arXiv2009

The effect of finite container size on granular jet formation

When an object is dropped into a bed of fine, loosely packed sand, a surprisingly energetic jet shoots out of the bed. In this work we study the effect that boundaries have on the granular jet formation. We did this by (i) decreasing the depth of the sand bed and (ii) reducing the container diameter to only a few ball diameters. These confinements change the behavior of the ball inside the bed, the void collapse, and the resulting jet height and shape. We map the parameter space of impact with Froude number, ambient pressure, and container dimensions as parameters. From these results we propose a new explanation for the thick-thin structure of the jet reported by several groups [J.R.Royer \textit{et al}., Nature Phys. \textbf{1}, 164 (2005)], [G.Caballero \textit{et al}., Phys. Rev. Lett. \textbf{99}, 018001 (2007)] and [J.O. Marston, \textit{et al}., Physics of Fluids \textbf{20}, 023301 (2008)].

physics.flu-dyn↗

arXiv2009

Collapse of Non-Axisymmetric Cavities

A round disk with a harmonic disturbance impacts on a water surface and creates a non-axisymmetric cavity which collapses under the influence of hydrostatic pressure. We use disks deformed with mode m=2 to m=6. For all mode numbers we find clear evidence for a phase inversion of the cavity wall during the collapse. We present a fluid dynamics video showing high speed imaging of different modes, pointing out the characteristic features during collapse.

physics.flu-dyn↗

arXiv2009

Evaporation-triggered Wetting Transition for Water Droplets upon Hydrophobic Microstructures

When placed on rough hydrophobic surfaces, water droplets of diameter larger than a few millimeters can easily form pearls, as they are in the Cassie-Baxter state with air pockets trapped underneath the droplet. Intriguingly, a natural evaporating process can drive such a Fakir drop into a completely wetting (Wenzel) state. Our microscopic observations with simultaneous side and bottom views of evaporating droplets upon transparent hydrophobic microstructures elucidate the water-filling dynamics and the mechanism of this evaporation-triggered transition. For the present material the wetting transition occurs when the water droplet size decreases to a few hundreds of micrometers in radius. We present a general global energy argument which estimates the interfacial energies depending on the drop size and can account for the critical radius for the transition.

cond-mat.soft↗

arXiv2009

Nucleation threshold and deactivation mechanisms of nanoscopic cavitation nuclei

The acoustic nucleation threshold for bubbles trapped in cavities has theoretically been predicted within the crevice theory by Atchley & Prosperetti [J. Acoust. Soc. Am. 86, 1065-1084 (1989)]. Here, we determine this threshold experimentally, by applying a single pressure pulse to bubbles trapped in cylindrical nanoscopic pits ("artificial crevices") with radii down to 50 nm. By decreasing the minimum pressure stepwise, we observe the threshold for which the bubbles start to nucleate. The experimental results are quantitatively in excellent agreement with the theoretical predictions of Atchley & Prosperetti. In addition, we provide the mechanism which explains the deactivation of cavitation nuclei: gas diffusion together with an aspherical bubble collapse. Finally, we present superhydrophobic nuclei which cannot be deactivated, unless with a high-speed liquid jet directed into the pit.

physics.flu-dyn↗

arXiv2009

Preferred sizes and ordering in surface nanobubble populations

Two types of homogeneous surface nanobubble populations, created by different means, are analyzed statistically on both their sizes and spatial positions. In the first type (created by droplet-deposition, case A) the bubble size R is found to be distributed according to a generalized gamma law with a preferred radius R*=20 nm. The radial distribution function shows a preferred spacing at ~5.5 R*. These characteristics do not show up in comparable Monte-Carlo simulations of random packings of hard disks with the same size distribution and the same density, suggesting a structuring effect in the nanobubble formation process. The nanobubble size distribution of the second population type (created by ethanol-water exchange, case B) is a mixture of two clearly separated distributions, hence, with two preferred radii. The local ordering is less significant, due to the looser packing of the nanobubbles.

physics.flu-dyn↗

arXiv2009

Radial boundary layer structure and Nusselt number in Rayleigh-Benard convection

Results from direct numerical simulations for three dimensional Rayleigh-Benard convection in a cylindrical cell of aspect ratio 1/2 and Pr=0.7 are presented. They span five decades of Ra from $2\times 10^6$ to $2 \times10^{11}$. Good numerical resolution with grid spacing $\sim$ Kolmogorov scale turns out to be crucial to accurately calculate the Nusselt number, which is in good agreement with the experimental data by Niemela et al., Nature, 404, 837 (2000). In underresolved simulations the hot (cold) plumes travel further from the bottom (top) plate than in the fully resolved case, because the thermal dissipation close to the sidewall (where the grid cells are largest) is insufficient. We compared the fully resolved thermal boundary layer profile with the Prandtl-Blasius profile. We find that the boundary layer profile is closer to the Prandtl Blasius profile at the cylinder axis than close to the sidewall, due to rising plumes in that region.

physics.flu-dyn↗

arXiv2009

Approach to Universality in Axisymmetric Bubble Pinch-Off

The pinch-off of an axisymmetric air bubble surrounded by an inviscid fluid is compared in four physical realizations: (i) cavity collapse in the wake of an impacting disc, (ii) gas bubbles injected through a small orifice, (iii) bubble rupture in a straining flow, and (iv) a bubble with an initially necked shape. Our boundary-integral simulations suggest that all systems eventually follow the universal behavior characterized by slowly varying exponents predicted in [Eggers et al., PRL 98, 094502 (2007)]. However, the time scale for the onset of this final regime is found to vary by orders of magnitude depending on the system in question: while for the impacting disc it is well in the millisecond range, for the gas injection needle universal behavior sets in only a few microseconds before pinch-off. These findings reconcile the different views expressed in recent literature about the universal nature of bubble pinch-off.

physics.flu-dyn↗

arXiv2009

Quantifying effective slip length over micropatterned hydrophobic surfaces

We employ micro-particle image velocimetry ($μ$-PIV) to investigate laminar micro-flows in hydrophobic microstructured channels, in particular the slip length. These microchannels consist of longitudinal micro-grooves, which can trap air and prompt a shear-free boundary condition and thus slippage enhancement. Our measurements reveal an increase of the slip length when the width of the micro-grooves is enlarged. The result of the slip length is smaller than the analytical prediction by Philip et al. [1] for an infinitely large and textured channel comprised of alternating shear-free and no-slip boundary conditions. The smaller slip length (as compared to the prediction) can be attributed to the confinement of the microchannel and the bending of the meniscus (liquid-gas interface). Our experimental studies suggest that the curvature of the meniscus plays an important role in microflows over hydrophobic micro-ridges.

physics.flu-dyn↗