arXiv subjects

Devaraj van der Meer

Publications and source records attributed to Devaraj van der Meer.

At least 37 records · Page 2Linked to original sources

arXiv2020

Impact cratering in sand: Comparing solid and liquid intruders

How does the impact of a deformable droplet on a granular bed differ from that caused by a solid impactor of similar size and density? Here, we experimentally study this question and focus on the effect of intruder deformability on the crater shape. For comparable impact energies, we show that the crater diameter is larger for droplets than for solid intruders but that the impact of the latter results in deeper craters. Interestingly, for initially dense beds of packing fractions larger than 0.58, we find that the resultant excavated crater volume is independent of the intruder deformability, suggesting an impactor-independent dissipation mechanism within the sand for these dense beds.

cond-mat.soft↗

arXiv2020

Dynamics of a toroidal bubble on a cylinder surface with an application to geophysical exploration

During the operation of a seismic airgun source, a certain amount of compressed high-pressure air is released from the airgun chamber into the surrounding water, generating an expanding toroidal bubble attached to the airgun-body. The subsequent oscillations of the bubble generate low-frequency pressure waves, which are used to map the ocean subbottom, e.g., to locate oil and gas reserves. The bubble dynamic behavior and the emitted pressure waves are inevitably influenced by the airgun-body. However, the bubble-airgun-body interaction is far from well understood. This paper investigates the strong interaction between a long cylinder and an attached toroidal bubble via hundreds of boundary integral simulations, aiming to provide new physical insights for airgun-bubble dynamics. Firstly, the overall physical phenomena are discussed and three types of bubble collapse patterns are identified, namely (i) upward jetting due to gravity, (ii) annular jet toward the cylinder body and (iii) weak/no jet. Thereafter, we investigate the effects of the cylinder radius, initial bubble pressure and Froude number on the bubble oscillation period and the pressure wave induced by the bubble. At last, the impact of a cylinder on a Sercel type airgun-bubble is discussed with a particular focus on the spectrum of the pressure waves.

physics.flu-dyn↗

arXiv2020

Growth of a bubble cloud in CO2-saturated water in microgravity

The diffusion-driven growth of a dense cloud of bubbles immersed in a gas-supersaturated liquid is a problem that finds applications in several modern technologies such as solvent-exchange micro-reactors, nanotechnology or the manufacturing of foamy materials. However, under Earth's gravity conditions, these dynamics can only be observed for a very limited time if the cloud is not attached to a surface, due to the action of buoyancy, i.e. of gravity effects. Here, we present experimental observations of the time evolution of dense bubble clouds growing in CO$_2$-supersaturated water in microgravity conditions. We report the existence of three regimes where the bubble cloud exhibits different growth rates. At short times, each bubble grows independently following the Epstein--Plesset equation. Later on, bubbles start to interact with each other and their growth rate diminishes as they compete for the available CO$_2$. When this happens, the growth rate slows down. This occurs earlier the deeper the bubble is in the cloud. Finally, at long times, only those bubbles on the husk continue growing. These regimes may be qualitatively described by a mathematical model where each individual bubble grows in the presence of a constellation of point mass sinks. Despite the model being only valid for dilute bubble clouds, its predictions are consistent with the experimental observations, even though the bubble clouds we observe are rather dense.

cond-mat.soft↗

arXiv2020

Ultrasound-enhanced mass transfer during single-bubble diffusive growth

Ultrasound is known to enhance surface bubble growth and removal in catalytic and microfluidic applications, yet the contributions of rectified diffusion and microstreaming phenomena towards mass transfer remain unclear. We quantify the effect of ultrasound on the diffusive growth of a single spherical CO$_2$ bubble growing on a substrate in supersaturated water. The time dependent bubble size, shape, oscillation amplitude and microstreaming flow field are resolved. We show and explain how ultrasound can enhance the diffusive growth of surface bubbles by up to two orders of magnitude during volumetric resonance. The proximity of the wall forces the bubble to oscillate non-spherically, thereby generating vigorous streaming during resonance that results in convection-dominated growth.

physics.flu-dyn↗

arXiv2020

Modelling large scale airgun-bubble dynamics with highly non-spherical features

A thorough understanding of the dynamics of meter-sized airgun-bubbles is very crucial to seabed geophysical exploration. In this study, we use the boundary integral method to investigate the highly non-spherical airgun-bubble dynamics and its corresponding pressure wave emission. Moreover, a model is proposed to also consider the process of air release from the airgun port, which is found to be the most crucial factor to estimate the initial peak of the pressure wave. The numerical simulations show good agreement with experiments, in terms of non-spherical bubble shapes and pressure waves. Thereafter, the effects of the port opening time $T\rm_{open}$, airgun firing depth, heat transfer, and gravity are numerically investigated. We find that a smaller $T\rm_{open}$ leads to a more violent air release that consequently causes stronger high-frequency pressure wave emissions; however, the low-frequency pressure waves are little affected. Additionally, the non-spherical bubble dynamics is highly dependent on the Froude number $Fr$. Starting from $Fr=2$, as $Fr$ increases, the jet contains lower kinetic energy, resulting in a stronger energy focusing of the bubble collapse itself and thus a larger pressure peak during the bubble collapse phase. For $Fr \ge 7$, the spherical bubble theory becomes an appropriate description of the airgun-bubble. The new findings of this study may provide a reference for practical operations and designing environmentally friendly airguns in the near future.

physics.flu-dyn↗

arXiv2019

Inverse Leidenfrost drop manipulation using menisci

Drops deposited on an evaporating liquid bath can be maintained in an inverse Leidenfrost state by the vapor emanating from the bath, making them levitate and hover almost without friction. These perfectly non-wetting droplets create a depression in the liquid interface that sustains their weight, which generates repellent forces when they approach a meniscus rising against a wall. Here, we study this reflection in detail, and show that frictionless Leidenfrost drops are a simple and efficient tool to probe the shape of an unknown interface. We then use the menisci to control the motion of the otherwise elusive drops. We create waveguides to direct and accelerate them and use parabolic walls to reflect and focus them. This could be particularly beneficial in the scale up of droplet cryopreservation processes: capillary interactions can be used to transport, gather and collect vitrified biological samples in absence of contact and contamination.

physics.flu-dyn↗

arXiv2018

Gas bubble evolution on microstructured silicon substrates

The formation, growth and detachment of gas bubbles on electrodes are omnipresent in electrolysis and other gas-producing chemical processes. To better understand their role in the mass transfer efficiency, we perform experiments involving successive bubble nucleations from a predefined nucleation site which consists of a superhydrophobic pit on top of a micromachined pillar. The experiments on bubble nucleation at these spots permit the comparison of mass transfer phenomena connected to electrolytically generated H$_2$ bubbles with the better-understood evolution of CO$_2$ bubbles in pressure-controlled supersaturated solutions. In both cases, bubbles grow in a diffusion-dominated regime. For CO$_2$ bubbles, it is found that the growth rate coefficient of subsequent bubbles always decreases due to the effect of gas depletion. In contrast, during constant current electrolysis, the bubble growth rates are affected by the evolution of a boundary layer of dissolved H$_2$ gas near the flat electrode which competes with gas depletion. This competition results in three distinct regimes. Initially, the bubble growth slows down with each new bubble in the succession due to the dominant depletion of the newly-formed concentration boundary layer. In later stages, the growth rate increases due to a local increase of gas supersaturation caused by the continuous gas production and finally levels off to an approximate steady growth rate. The gas transport efficiency associated with the electrolytic bubble succession follows a similar trend in time. Finally, for both H$_2$ and CO$_2$ bubbles, detachment mostly occurs at smaller radii than theory predicts and at a surprisingly wide spread of sizes. A number of explanations are proposed, but the ultimate origin of the spreading of the results remains elusive.

cond-mat.soft↗

arXiv2017

Experiments and characterization of low-frequency oscillations in a granular column

The behaviour of a vertically vibrated granular bed is reminiscent of a liquid in that it exhibits many phenomena such as convection and Faraday-like surface waves. However, when the lateral dimensions of the bed are confined such that a quasi-one-dimensional geometry is formed, the only phenomena that remain are bouncing bed and the granular Leidenfrost effect. This permits the observation of the granular Leidenfrost state for a wide range of energy injection parameters, and more specifically allows for a thorough characterisation of the low-frequency oscillation (LFO) that is present in this state. In both experiments and particle simulations we determine the LFO frequency from the power spectral density of the centre of mass signal of the grains, varying the amplitude and frequency of the driving, the particle diameter and the number of layers in the system. We thus find that (i) the LFO frequency is inversely proportional to the fast inertial time scale and (ii) decorrelates with a typical decay time proportional to the slow dissipative time scale in the system. The latter is consistent with the view that the LFO is driven by the inherent noise that is present in the granular Leidenfrost state with a low number of particles.

cond-mat.soft↗

arXiv2017

The history effect in bubble growth and dissolution. Part 1. Theory

The term `history effect' refers to the contribution of any past mass transfer events between a gas bubble and its liquid surroundings towards the current diffusion-driven growth or dissolution dynamics of that same bubble. The history effect arises from the (non-instantaneous) development of the dissolved gas concentration boundary layer in the liquid in response to changes in the concentration at the bubble interface caused, for instance, by variations of the ambient pressure in time. Essentially, the history effect amounts to the acknowledgement that at any given time the mass flux across the bubble is conditioned by the preceding time-history of the concentration at the bubble boundary. Considering the canonical problem of an isolated spherical bubble at rest, we show that the contribution of the history effect in the current interfacial concentration gradient is fully contained within a memory integral of the interface concentration. Retaining this integral term, we formulate a governing differential equation for the bubble dynamics, analogous to the well-known Epstein-Plesset solution. Our equation does not make use of the quasi-static radius approximation. An analytical solution is presented for the case of multiple step-like jumps in pressure. The nature and relevance of the history effect is then assessed through illustrative examples. Finally, we investigate the role of the history effect in rectified diffusion for a bubble that pulsates under harmonic pressure forcing in the non-inertial, isothermal regime.

physics.flu-dyn↗

arXiv2017

The history effect on bubble growth and dissolution. Part 2. Experiments and simulations of a spherical bubble attached to a horizontal flat plate

The accurate description of the growth or dissolution dynamics of a soluble gas bubble in a super- or undersaturated solution requires taking into account a number of physical effects that contribute to the instantaneous mass transfer rate. One of these effects is the so-called history effect. It refers to the contribution of the local concentration boundary layer around the bubble that has developed from past mass transfer events between the bubble and liquid surroundings. In Part 1 of this work \citep{penas2016}, a theoretical treatment of this effect was given for a spherical, isolated bubble. Here, Part 2 provides an experimental and numerical study of the history effect regarding a spherical bubble attached to a horizontal flat plate and in the presence of gravity. The simulation technique developed in this paper is based on a streamfunction--vorticity formulation that may be applied to other flows where bubbles or drops exchange mass in the presence of a gravity field. Using this numerical tool, simulations are performed for the same conditions used in the experiments, in which the bubble is exposed to subsequent growth and dissolution stages, using step-wise variations in the ambient pressure. Besides proving the relevance of the history effect, the simulations highlight the importance that boundary-induced advection has to accurately describe bubble growth and shrinkage, i.e. the bubble radius evolution. In addition, natural convection has a significant influence that shows up in the velocity field even at short times, though, given the supersaturation conditions studied here, the bubble evolution is expected to be mainly diffusive.

physics.flu-dyn↗

arXiv2017

Granular Motor in the Non-Brownian Limit

In this work we experimentally study a granular rotor which is similar to the famous Smoluchowski-Feynman device and which consists of a rotor with four vanes immersed in a granular gas. Each side of the vanes can be composed of two different materials, creating a rotational asymmetry and turning the rotor into a ratchet. When the granular temperature is high, the rotor is in movement all the time, and its angular velocity distribution is well described by the Brownian Limit discussed in previous works. When the granular temperature is lowered considerably we enter the so-called Single Kick Limit, where collisions occur rarely and the unavoidable external friction causes the rotor to be at rest for most of the time. We find that the existing models are not capable of adequately describing the experimentally observed distribution in this limit. We trace back this discrepancy to the non-constancy of the deceleration due to external friction and show that incorporating this effect into the existing models leads to full agreement with our experiments. Subsequently, we extend this model to describe the angular velocity distribution of the rotor for any temperature of the gas, and obtain a very good agreement between the model and experimental data.

cond-mat.stat-mech↗

arXiv2017

Crater formation during raindrop impact on sand

After a raindrop impacts on a granular bed, a crater is formed as both drop and target deform. After an initial, transient, phase in which the maximum crater depth is reached, the crater broadens outwards until a final steady shape is attained. By varying the impact velocity of the drop and the packing density of the bed, we find that avalanches of grains are important in the second phase and hence, affect the final crater shape. In a previous paper, we introduced an estimate of the impact energy going solely into sand deformation and here we show that both the transient and final crater diameter collapse with this quantity for various packing densities. The aspect ratio of the transient crater is however altered by changes in the packing fraction.

cond-mat.soft↗

arXiv2017

Drop tower setup to study the diffusion-driven growth of a foam ball in supersaturated liquids in microgravity conditions

The diffusion-driven growth of a foam ball is a phenomenon that appears in many manufacturing process as well as in a variety of geological phenomena. Usually these processes are greatly affected by gravity, as foam is much lighter than the surrounding liquid. However, the growth of the foam free of gravity effects is still very relevant, as it is connected to manufacturing in space and to the forma- tion of rocks in meteorites and other small celestial bodies. The aim of this research is to investigate experimentally the growth of a bubble cloud growing in a gas-supersaturated liquid in microgravity conditions. Here, we describe the ex- periments carried out in the drop tower of the Center of Ap- plied Space Technology and Microgravity (ZARM). In few words, a foam seed is formed with spark-induced cavitation in carbonated water, whose time evolution is recorded with two high-speed cameras. Our preliminary results shed some light on how the size of the foam ball scales with time, in particular at times much longer than what could be studied in normal conditions, i.e. on the surface of the Earth, where the dynamics of the foam is already dominated by gravity after several milliseconds.

physics.flu-dyn↗

arXiv2017

Dramatic effect of fluid chemistry on cornstarch suspensions: linking particle interactions to macroscopic rheology

Suspensions of cornstarch in water exhibit strong dynamic shear-thickening. We show that partly replacing water by ethanol strongly alters the suspension rheology. We perform steady and non-steady rheology measurements combined with atomic force microscopy to investigate the role of fluid chemistry on the macroscopic rheology of the suspensions and its link with the interactions between cornstarch grains. Upon increasing the ethanol content, the suspension goes through a yield-stress fluid state and ultimately becomes a shear-thinning fluid. On the cornstarch grain scale, atomic force microscopy measurements reveal the presence of polymers on the cornstarch surface, which exhibit a co-solvency effect. At intermediate ethanol content, a maximum of polymer solubility induces high microscopic adhesion which we relate to the macroscopic yield stress.

cond-mat.soft↗

arXiv2016

Giant drag reduction due to interstitial air in sand

When an object impacts onto a bed of very loose, fine sand, the drag it experiences depends on the ambient pressure in a surprising way: Drag is found to increase significantly with decreasing pressure. We use a modified penetrometer experiment to investigate this effect and directly measure the drag on a sphere as a function of both velocity and pressure. We observe a drag reduction of over 90% and trace this effect back to the presence of air in the pores between the sand grains. Finally, we construct a model based on the modification of grain-grain interactions that is in full quantitative agreement with the experiments.

cond-mat.soft↗

arXiv2016

Liquid-grain mixing suppresses droplet spreading and splashing during impact

Would a raindrop impacting on a coarse beach behave differently from that impacting on a desert of fine sand? We study this question by a series of model experiments, where the packing density of the granular target, the wettability of individual grains, the grain size, the impacting liquid, and the impact speed are varied. We find that by increasing the grain size and/or the wettability of individual grains the maximum droplet spreading undergoes a transition from a capillary regime towards a viscous regime, and splashing is suppressed. The liquid-grain mixing is discovered to be the underlying mechanism. An effective viscosity is defined accordingly to quantitatively explain the observations.

cond-mat.soft↗

arXiv2016

Volume entrained in the wake of a disc intruding into an oil-water interface

An object moving through a plane interface into a fluid deforms the interface in such a way that fluid from one side of the interface is entrained into the other side, a phenomenon known as Darwin's drift. We investigate this phenomenon experimentally using a disc which is started exactly at the interface of two immiscible fluids, namely oil and water. First, we observe that due to the density difference between the two fluids the deformation of the interface is influenced by gravity, and show that there exits a time window of universal behavior. Secondly, we show by comparing with boundary integral simulations that, even though the deformation is universal, our results cannot be fully explained by potential flow solutions. We attribute this difference to the starting vortex, which is created in the wake of the disc. Universal behavior is preserved, however, because the size and strength of the vortex shows the same universality as the potential flow solution.

physics.flu-dyn↗

arXiv2015

Raindrop impact on sand: a dynamic explanation of crater morphologies

As a droplet impacts on a granular substrate, both the intruder and the target deform, during which the liquid may penetrate into the substrate. {These three aspects together distinguish} it from other impact phenomena in the literature. We perform high-speed, double-laser profilometry measurements and disentangle the dynamics into three aspects: the deformation of the substrate during the impact, the maximum spreading diameter of the droplet, and the penetration of the liquid into the substrate. By systematically varying the impact speed and the packing fraction of the substrate, (i) the substrate deformation indicates a critical packing fraction $ϕ^*\approx 0.585$; (ii) the maximum droplet spreading diameter is found to scale with a Weber number corrected by the substrate deformation; and (iii) a model about the liquid penetration is established and is used to explain the observed crater morphology transition.

cond-mat.soft↗