arXiv subjects

Deyou Zhang

Publications and source records attributed to Deyou Zhang.

12 recordsLinked to original sources

arXiv2026

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

cs.IT↗

arXiv2025

Fluid Antenna Array Enhanced Over-the-Air Computation

Over-the-air computation (AirComp) has emerged as a promising technology for fast wireless data aggregation by harnessing the superposition property of wireless multiple-access channels. This paper investigates a fluid antenna (FA) array-enhanced AirComp system, employing the new degrees of freedom achieved by antenna movements. Specifically, we jointly optimize the transceiver design and antenna position vector (APV) to minimize the mean squared error (MSE) between target and estimated function values. To tackle the resulting highly non-convex problem, we adopt an alternating optimization technique to decompose it into three subproblems. These subproblems are then iteratively solved until convergence, leading to a locally optimal solution. Numerical results show that FA arrays with the proposed transceiver and APV design significantly outperform the traditional fixed-position antenna arrays in terms of MSE.

cs.IT↗

arXiv2023

Beamforming Design for Active RIS-Aided Over-the-Air Computation

Over-the-air computation (AirComp) is emerging as a promising technology for wireless data aggregation. However, its performance is hampered by users with poor channel conditions. To mitigate such a performance bottleneck, this paper introduces an active reconfigurable intelligence surface (RIS) into the AirComp system. Specifically, we begin by exploring the ideal RIS model and propose a joint optimization of the transceiver design and RIS configuration to minimize the mean squared error (MSE) between the target and estimated function values. To manage the resultant tri-convex optimization problem, we employ the alternating optimization (AO) technique to decompose it into three convex subproblems, each solvable optimally. Subsequently, we investigate two specific cases and analyze their respective asymptotic performance to reveal the superiority of the active RIS in mitigating the MSE relative to its passive counterpart. Lastly, we adapt our transceiver and RIS configuration design to account for the self-interference of the active RIS. To handle the resultant highly non-convex problem, we further devise a two-layer AO framework. Simulation results demonstrate the superiority of the active RIS in enhancing AirComp performance compared to its passive counterpart.

cs.IT↗

arXiv2023

NOMA Enabled Multi-Access Edge Computing: A Joint MU-MIMO Precoding and Computation Offloading Design

This letter investigates computation offloading and transmit precoding co-design for multi-access edge computing (MEC), where multiple MEC users (MUs) equipped with multiple antennas access the MEC server in a non-orthogonal multiple access manner. We aim to minimize the total energy consumption of all MUs while satisfying the latency constraints by jointly optimizing the computational frequency, offloading ratio, and precoding matrix of each MU. For tractability, we first decompose the original problem into three subproblems and then solve these subproblems iteratively until convergence. Simulation results validate the convergence of the proposed method and demonstrate its superiority over baseline algorithms.

cs.IT↗

arXiv2023

Federated Learning via Active RIS Assisted Over-the-Air Computation

In this paper, we propose leveraging the active reconfigurable intelligence surface (RIS) to support reliable gradient aggregation for over-the-air computation (AirComp) enabled federated learning (FL) systems. An analysis of the FL convergence property reveals that minimizing gradient aggregation errors in each training round is crucial for narrowing the convergence gap. As such, we formulate an optimization problem, aiming to minimize these errors by jointly optimizing the transceiver design and RIS configuration. To handle the formulated highly non-convex problem, we devise a two-layer alternative optimization framework to decompose it into several convex subproblems, each solvable optimally. Simulation results demonstrate the superiority of the active RIS in reducing gradient aggregation errors compared to its passive counterpart.

cs.IT↗

arXiv2023

Over-the-Air Computation Empowered Federated Learning: A Joint Uplink-Downlink Design

In this paper, we investigate the communication designs of over-the-air computation (AirComp) empowered federated learning (FL) systems considering uplink model aggregation and downlink model dissemination jointly. We first derive an upper bound on the expected difference between the training loss and the optimal loss, which reveals that optimizing the FL performance is equivalent to minimizing the distortion in the received global gradient vector at each edge node. As such, we jointly optimize each edge node transmit and receive equalization coefficients along with the edge server forwarding matrix to minimize the maximum gradient distortion across all edge nodes. We further utilize the MNIST dataset to evaluate the performance of the considered FL system in the context of the handwritten digit recognition task. Experiment results show that deploying multiple antennas at the edge server significantly reduces the distortion in the received global gradient vector, leading to a notable improvement in recognition accuracy compared to the single antenna case.

cs.IT↗

arXiv2023

IRS Assisted Federated Learning A Broadband Over-the-Air Aggregation Approach

We consider a broadband over-the-air computation empowered model aggregation approach for wireless federated learning (FL) systems and propose to leverage an intelligent reflecting surface (IRS) to combat wireless fading and noise. We first investigate the conventional node-selection based framework, where a few edge nodes are dropped in model aggregation to control the aggregation error. We analyze the performance of this node-selection based framework and derive an upper bound on its performance loss, which is shown to be related to the selected edge nodes. Then, we seek to minimize the mean-squared error (MSE) between the desired global gradient parameters and the actually received ones by optimizing the selected edge nodes, their transmit equalization coefficients, the IRS phase shifts, and the receive factors of the cloud server. By resorting to the matrix lifting technique and difference-of-convex programming, we successfully transform the formulated optimization problem into a convex one and solve it using off-the-shelf solvers. To improve learning performance, we further propose a weight-selection based FL framework. In such a framework, we assign each edge node a proper weight coefficient in model aggregation instead of discarding any of them to reduce the aggregation error, i.e., amplitude alignment of the received local gradient parameters from different edge nodes is not required. We also analyze the performance of this weight-selection based framework and derive an upper bound on its performance loss, followed by minimizing the MSE via optimizing the weight coefficients of the edge nodes, their transmit equalization coefficients, the IRS phase shifts, and the receive factors of the cloud server. Furthermore, we use the MNIST dataset for simulations to evaluate the performance of both node-selection and weight-selection based FL frameworks.

cs.IT↗

arXiv2022

Beam Tracking for Dynamic mmWave Channels: A New Training Beam Sequence Design Approach

In this paper, we develop an efficient training beam sequence design approach for millimeter wave MISO tracking systems. We impose a discrete state Markov process assumption on the evolution of the angle of departure and introduce the maximum a posteriori criterion to track it in each beam training period. Since it is infeasible to derive an explicit expression for the resultant tracking error probability, we turn to its upper bound, which possesses a closed-form expression and is therefore leveraged as the objective function to optimize the training beam sequence. Considering the complicated objective function and the unit modulus constraints imposed by analog phase shifters, we resort to the particle swarm algorithm to solve the formulated optimization problem. Numerical results validate the superiority of the proposed training beam sequence design approach.

cs.IT↗

arXiv2022

Cooperative Beamforming for RIS-Aided Cell-Free Massive MIMO Networks

The combination of cell-free massive multiple-input multiple-output (CF-mMIMO) and reconfigurable intelligent surface (RIS) is envisioned as a promising paradigm to improve network capacity and enhance coverage capability. However, to reap full benefits of RIS-aided CF-mMIMO, the main challenge is to efficiently design cooperative beamforming (CBF) at base stations (BSs), RISs, and users. Firstly, we investigate the fractional programing to convert the weighted sum-rate (WSR) maximization problem into a tractable optimization problem. Then, the alternating optimization framework is employed to decompose the transformed problem into a sequence of subproblems, i.e., hybrid BF (HBF) at BSs, passive BF at RISs, and combining at users. In particular, the alternating direction method of multipliers algorithm is utilized to solve the HBF subproblem at BSs. Concretely, the analog BF design with unit-modulus constraints is solved by the manifold optimization (MO) while we obtain a closed-form solution to the digital BF design that is essentially a convex least-square problem. Additionally, the passive BF at RISs and the analog combining at users are designed by primal-dual subgradient and MO methods. Moreover, considering heavy communication costs in conventional CF-mMIMO systems, we propose a partially-connected CF-mMIMO (P-CF-mMIMO) framework to decrease the number of connections among BSs and users. To better compromise WSR performance and network costs, we formulate the BS selection problem in the P-CF-mMIMO system as a binary integer quadratic programming (BIQP) problem, and develop a relaxed linear approximation algorithm to handle this BIQP problem. Finally, numerical results demonstrate superiorities of our proposed algorithms over baseline counterparts.

cs.IT↗

arXiv2021

Federated Learning over Wireless IoT Networks with Optimized Communication and Resources

To leverage massive distributed data and computation resources, machine learning in the network edge is considered to be a promising technique especially for large-scale model training. Federated learning (FL), as a paradigm of collaborative learning techniques, has obtained increasing research attention with the benefits of communication efficiency and improved data privacy. Due to the lossy communication channels and limited communication resources (e.g., bandwidth and power), it is of interest to investigate fast responding and accurate FL schemes over wireless systems. Hence, we investigate the problem of jointly optimized communication efficiency and resources for FL over wireless Internet of things (IoT) networks. To reduce complexity, we divide the overall optimization problem into two sub-problems, i.e., the client scheduling problem and the resource allocation problem. To reduce the communication costs for FL in wireless IoT networks, a new client scheduling policy is proposed by reusing stale local model parameters. To maximize successful information exchange over networks, a Lagrange multiplier method is first leveraged by decoupling variables including power variables, bandwidth variables and transmission indicators. Then a linear-search based power and bandwidth allocation method is developed. Given appropriate hyper-parameters, we show that the proposed communication-efficient federated learning (CEFL) framework converges at a strong linear rate. Through extensive experiments, it is revealed that the proposed CEFL framework substantially boosts both the communication efficiency and learning performance of both training loss and test accuracy for FL over wireless IoT networks compared to a basic FL approach with uniform resource allocation.

cs.LG↗

arXiv2021

Secret Key Generation for Intelligent Reflecting Surface Assisted Wireless Communication Networks

We propose and analyze secret key generation using intelligent reflecting surface (IRS) assisted wireless communication networks. To this end, we first formulate the minimum achievable secret key capacity for an IRS acting as a passive beamformer in the presence of multiple eavesdroppers. Next, we develop an optimization framework for the IRS reflecting coefficients based on the secret key capacity lower bound. To derive a tractable and efficient solution, we design and analyze a semidefinite relaxation (SDR) and successive convex approximation (SCA) based algorithm for the proposed optimization. Simulation results show that employing our IRS-based algorithm can significantly improve the secret key generation capacity for a wide-range of wireless channel parameters.

eess.SP↗

arXiv2019

Beam Allocation for Millimeter-Wave MIMO Tracking Systems

In this paper, we propose a new beam allocation strategy aiming to maximize the average successful tracking probability (ASTP) of time-varying millimeter-wave MIMO systems. In contrast to most existing works that employ one transmitting-receiving (Tx-Rx) beam pair once only in each training period, we investigate a more general framework, where the Tx-Rx beam pairs are allowed to be used repeatedly to improve the received signal powers in specific directions. In the case of orthogonal Tx-Rx beam pairs, a power-based estimator is employed to track the time-varying AoA and AoD of the channel, and the resulting training beam pair sequence design problem is formulated as an integer nonlinear programming (I-NLP) problem. By dividing the feasible region into a set of subregions, the formulated I-NLP is decomposed into a series of concave sub I-NLPs, which can be solved by recursively invoking a nonlinear branch-and-bound algorithm. To reduce the computational cost, we relax the integer constraints of each sub I-NLP and obtain a low-complexity solution via solving the Karush-Kuhn-Tucker conditions of their relaxed problems. For the case when the Tx-Rx beam pairs are overlapped in the angular space, we estimate the updated AoA and AoD via an orthogonal matching pursuit (OMP) algorithm. Moreover, since no explicit expression for the ASTP exists for the OMP-based estimator, we derive a closed-form lower bound of the ASTP, based on which a favorable beam pair allocation strategy can be obtained. Numerical results demonstrate the superiority of the proposed beam allocation strategy over existing benchmarks.

eess.SP↗