arXiv subjects

Deyuan Lyu

Publications and source records attributed to Deyuan Lyu.

10 recordsLinked to original sources

arXiv2025

Interface-engineered voltage-driven magnetic tunnel junctions with ultra-low-energy magnetization switching

Electric-field control of spin states offers a promising route to ultra-low-power, ultra-fast magnetization switching in spintronic devices such as magnetic tunnel junctions (MTJs). Recent progress in modulating spin-orbit interactions at the interfaces between 3d transition-metal ferromagnets and dielectric layers has underscored the role of atomic-scale heavy-metal doping in optimizing device performance. Here, we experimentally demonstrate highly energy-efficient, voltage-driven magnetization switching in MTJs exhibiting large tunnel magnetoresistance (TMR), enabled by a remote doping technique that precisely controls the iridium (Ir) concentration near the MgO-CoFeB interface in the free layer. Our devices achieve a switching energy of only 3.5 fJ per bit for nanoscale MTJs operating in the sub-nanosecond regime, while maintaining a TMR ratio up to 160 percent after 400 C post-annealing. These findings establish a viable pathway toward scalable, ultra-low-power nonvolatile memory, positioning voltage-driven MTJs as strong contenders for next-generation magnetoresistive random-access memory (MRAM) and other emerging spintronic applications.

cond-mat.mes-hall↗

arXiv2025

Demonstration of Electron-Mediated Voltage-Controlled Exchange Coupling in Perpendicular Magnetic Tunnel Junctions

Electron-mediated voltage control of exchange coupling (EM-VCEC) has been proposed as a mechanism for magnetization switching via modulation of spin-dependent electron reflection. However, its experimental verification has been challenging due to the coexistence of slower, voltage-induced ionic effects. Here, we fabricate magnetic tunnel junction (MTJ) devices that enable nanosecond timescale voltage application. Our results reveal rapid exchange coupling modulation on the nanosecond timescale, consistent with an electronic origin. The observed enhancement and saturation at low temperatures further rule out ionic migration, conclusively confirming the electronic nature of the mechanism. These results establish EM-VCEC as a viable mechanism for fast and energy-efficient voltage-driven magnetic switching.

physics.app-ph↗

arXiv2025

Optimizing Time-resolved Magneto-optical Kerr Effect for High-fidelity Magnetic Characterization

Spintronics has emerged as a key technology for fast and non-volatile memory with great CMOS compatibility. As the building blocks for these cutting-edge devices, magnetic materials require precise characterization of their critical properties, such as the effective anisotropy field ($H_{\rm{k,eff}}$, related to magnetic stability) and damping ($α$ key factor in device energy efficiency). Accurate measurements of these properties are essential for designing and fabricating high-performance spintronic devices. Among advanced metrology techniques, Time-resolved Magneto-Optical Kerr Effect (TR-MOKE) stands out for its superb temporal and spatial resolutions, surpassing traditional methods like ferromagnetic resonance (FMR). However, the full potential of TR-MOKE has not yet been fully pledged due to the lack of systematic optimization and robust operational guidelines. In this study, we address this gap by developing experimentally validated guidelines for optimizing TR-MOKE metrology across materials with perpendicular magnetic anisotropy (PMA) and in-plane magnetic anisotropy (IMA). Our work identifies the optimal ranges of the field angle to simultaneously achieve high signal amplitudes and improve measurement sensitivities to $H_{\rm{k,eff}}$ and $α$. By suppressing the influence of inhomogeneities and boosting sensitivity, our work significantly enhances TR-MOKE capability to extract magnetic properties with high accuracy and reliability. This optimization framework positions TR-MOKE as an indispensable tool for advancing spintronics, paving the way for energy-efficient and high-speed devices that will redefine the landscape of modern computing and memory technologies.

cond-mat.mes-hall↗

arXiv2025

Anomalous vortex Hall effect in a ferromagnet/superconductor heterostructure

The coexistence of superconductivity and ferromagnetism is a fascinating and complex phenomenon in condensed matter physics, as these two states are typically mutually exclusive due to their competing spin configurations. However, the interplay between these two orders through the proximity effect has been a subject of intense research as it opens up possibilities for novel technological applications. Here, we report the coexistence of superconductivity and ferromagnetism in superconducting δ-TaN/ferromagnetic CoFeB heterostructures grown by facing-target sputtering. Superconducting states are comprehensively investigated, with evidence of strong correlation between the superconducting and ferromagnetic order parameters. In particular, we observed an anomalous Hall signal without the presence of the magnetic field in the mixed state of the superconducting transition near the critical temperature. Systematic characterizations of the Hall resistance under varying temperatures and magnetic fields attribute this behavior to the vortex Hall effect (VHE), whereby superconducting vortices in the mixed state undergo transverse motions near the critical temperature. Unlike previously reported VHEs in conventional type-II superconductors, the anomalous VHE in TaN is induced by the stray field in the underlying CoFeB layers. The concurrency of strong spin-orbit coupling, the superconductivity in the TaN layer, and the highly spin-polarized ferromagnetic ordering in the CoFeB layer offers new insights into proximity-induced vortex dynamics and the design of novel superconducting spintronic devices.

cond-mat.supr-con↗

arXiv2025

Fast spin precession and strong perpendicular magnetic anisotropy in ferrimagnetic Mn4N thin films improved by Pd buffer layer

Ferrimagnets take the advantages of both ferromagnets and antiferromagnets making them promise for spintronic applications. Here we prepared ferrimagnetic Mn4N thin films with high Curie temperature and investigated the crystalline structure and magnetic properties affected by the Pd buffer layer. We demonstrated that both crystalline quality and perpendicular magnetic anisotropy (PMA) of Mn4N thin films are enhanced significantly due to the relaxation of tensile stress induced by the Pd buffer layer. We also demonstrated a fast spin precession at room temperature, almost 100 GHz, in Mn4N thin films. With the characteristics of high thermal stability, enhanced PMA by buffer layer and fast spin precession, Mn4N thin film is a promising material for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

Energy Efficient Stochastic Signal Manipulation in Superparamagnetic Tunnel Junctions via Voltage-Controlled Exchange Coupling

Superparamagnetic tunnel junctions (sMTJs) are emerging as promising components for stochastic units in neuromorphic computing, owing to their tunable random switching behavior. Conventional MTJ control methods, such as spin-transfer torque (STT) and spin-orbit torque (SOT), often require substantial power. Here, we introduce the voltage-controlled exchange coupling (VCEC) mechanism, enabling switching between antiparallel and parallel states in sMTJs with an ultralow power consumption of only 40 nW, approximately two orders of magnitude lower than conventional STT-based sMTJs. This mechanism yields a sigmoid-shaped output response, making it ideally suited for neuromorphic computing applications. Furthermore, we validate the feasibility of integrating VCEC with the SOT current control, offering an additional dimension for magnetic state manipulation. This work marks the first practical demonstration of VCEC effect in sMTJs, highlighting its potential as a low-power control solution for probabilistic bits in advanced computing systems.

physics.app-ph↗

arXiv2024

Giant spin Hall effect with multi-directional spin components in Ni4W

Spin-orbit torque (SOT) can be used to efficiently manipulate the magnetic state of magnetic materials, which is an essential element for memory and logic applications. Due to symmetry constraints, only in-plane spins can be injected into the ferromagnet from the underlying SOT layer for conventional SOT materials such as heavy metals and topological materials. Through the use of materials with low symmetries, or other symmetry breaking approaches, unconventional spin currents with out-of-plane polarization has been demonstrated and enabled field-free deterministic switching of perpendicular magnetization. Despite this progress, the SOT efficiency of these materials has typically remained low. Here, we report a giant SOT efficiency of 0.85 in sputtered Ni4W/CoFeB heterostructure at room temperature, as evaluated by second harmonic Hall measurements. In addition, due to the low crystal symmetry of Ni4W, unconventional out-of-plane and Dresselhaus-like spin components were observed. Macro-spin simulation suggests our spin Hall tensor to provide about an order of magnitude improvement in the magnetization switching efficiency, thus broadening the path towards energy efficient spintronic devices using low-symmetry materials.

cond-mat.mes-hall↗

arXiv2022

Perpendicular magnetic anisotropy, tunneling magnetoresistance and spin-transfer torque effect in magnetic tunnel junctions with Nb layers

Nb and its compounds are widely used in quantum computing due to their high superconducting transition temperatures and high critical fields. Devices that combine superconducting performance and spintronic non-volatility could deliver unique functionality. Here we report the study of magnetic tunnel junctions with Nb as the heavy metal layers. An interfacial perpendicular magnetic anisotropy energy density of 1.85 mJ/m2 was obtained in Nb/CoFeB/MgO heterostructures. The tunneling magnetoresistance was evaluated in junctions with different thickness combinations and different annealing conditions. An optimized magnetoresistance of 120% was obtained at room temperature, with a damping parameter of 0.011 determined by ferromagnetic resonance. In addition, spin-transfer torque switching has also been successfully observed in these junctions with a quasistatic switching current density of 7.3*10^5 A/cm2.

physics.app-ph↗

arXiv2022

Room temperature spin-orbit torque efficiency in sputtered low-temperature superconductor delta-TaN

In the course of searching for promising topological materials for applications in future topological electronics, we evaluated spin-orbit torques (SOTs) in high-quality sputtered $δ-$TaN/Co20Fe60B20 devices through spin-torque ferromagnetic resonance ST-FMR and spin pumping measurements. From the ST-FMR characterization we observed a significant linewidth modulation in the magnetic Co20Fe60B20 layer attributed to the charge-to-spin conversion generated from the $δ-$TaN layer. Remarkably, the spin-torque efficiency determined from ST-FMR and spin pumping measurements is as large as $Θ =$ 0.034 and 0.031, respectively. These values are over two times larger than for $α-$Ta, but almost five times lower than for $β-$Ta, which can be attributed to the low room temperature electrical resistivity $\sim 74μΩ$ cm in $δ-$TaN. A large spin diffusion length of at least $\sim8$ nm is estimated, which is comparable to the spin diffusion length in pure Ta. Comprehensive experimental analysis, together with density functional theory calculations, indicates that the origin of the pronounced SOT effect in $δ-$TaN can be mostly related to a significant contribution from the Berry curvature associated with the presence of a topically nontrivial electronic band structure in the vicinity of the Fermi level (EF). Through additional detailed theoretical analysis, we also found that an isostructural allotrope of the superconducting $δ-$TaN phase, the simple hexagonal structure, $θ-$TaN, has larger Berry curvature, and that, together with expected reasonable charge conductivity, it can also be a promising candidate for exploring a generation of spin-orbit torque magnetic random access memory as cheap, temperature stable, and highly efficient spin current sources.

cond-mat.mes-hall↗

arXiv2021

Bipolar electric field switching of perpendicular magnetic tunnel junctions through voltage controlled exchange coupling

Perpendicular magnetic tunnel junctions (p-MTJs) switched utilizing bipolar electric fields have extensive applications in energy-efficient memory and logic devices. Voltage-controlled magnetic anisotropy linearly lowers the energy barrier of ferromagnetic layer via electric field effect and efficiently switches p-MTJs only with a unipolar behavior. Here we demonstrate a bipolar electric field effect switching of 100-nm p-MTJs with a synthetic antiferromagnetic free layer through voltage-controlled exchange coupling (VCEC). The switching current density, ~1.1x10^5 A/cm^2, is one order of magnitude lower than that of the best-reported spin-transfer torque devices. Theoretical results suggest that electric field induces a ferromagnetic-antiferromagnetic exchange coupling transition of the synthetic antiferromagnetic free layer and generates a field-like interlayer exchange coupling torque, which cause the bidirectional magnetization switching of p-MTJs. A preliminary benchmarking simulation estimates that VCEC dissipates an order of magnitude lower writing energy compared to spin-transfer torque at the 15-nm technology node. These results could eliminate the major obstacle in the development of spin memory devices beyond their embedded applications.

physics.app-ph↗