arXiv subjects

Di Zhu

Publications and source records attributed to Di Zhu.

90 records · Page 5Linked to original sources

arXiv2020

A compact and tunable forward coupler based on high-impedance superconducting nanowires

Developing compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of $416\,\mathrm{μm^2}$. At 4.753 GHz, the input signal couples equally to the through port and forward-coupling port (50:50) at $-6.7\,\mathrm{dB}$ with $-13.5\,\mathrm{dB}$ isolation. The coupling ratio can be controlled with DC bias current or temperature by exploiting the dependence of the kinetic inductance on these quantities. The material and fabrication-process are suitable for direct integration with superconducting circuits, providing a practical solution to the signal distribution bottlenecks in developing large-scale quantum computers.

physics.app-ph↗

arXiv2020

Superconducting MoN thin films prepared by DC reactive magnetron sputtering for nanowire single-photon detectors

We present a comprehensive study of molybdenum nitride (MoN) thin film deposition using direct current (DC) reactive magnetron sputtering. We have investigated the effect of various deposition conditions on the superconducting and electrical properties of the films. Furthermore, we have shown that meander-shaped single-photon detectors made from 5 nm MoN films have saturated quantum detection efficiency at the telecom wavelength of 1550 nm. Our results indicate that MoN may be a material of interest for practical applications of low-temperature superconductors, including single-photon detectors and transition-edge sensors.

cond-mat.supr-con↗

arXiv2020

Enhancing the Performance of Superconducting Nanowire-Based Detectors with High-Filling Factor by Using Variable Thickness

Current crowding at bends of superconducting nanowire single-photon detectors is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by the current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality.

cond-mat.supr-con↗

arXiv2020

Reconfigurable electro-optic frequency shifter

Here we demonstrate an on-chip electro-optic frequency shifter that is precisely controlled using only a single-tone microwave signal. This is accomplished by engineering the density of states of, and coupling between, optical modes in ultra-low loss electro-optic waveguides and resonators realized in lithium niobate nanophotonics. Our device provides frequency shifts as high as 28 GHz with measured shift efficiencies of ~99% and insertion loss of <0.5 dB. Importantly, the device can be reconfigured as a tunable frequency-domain beam splitter, in which the splitting ratio and splitting frequency are controlled by microwave power and frequency, respectively. Using the device, we also demonstrate (non-blocking) frequency routing through an efficient exchange of information between two distinct frequency channels, i.e. swap operation. Finally, we show that our scheme can be scaled to achieve cascaded frequency shifts beyond 100 GHz. Our device could become an essential building-block for future high-speed and large-scale classical information processors as well as emerging frequency-domain photonic quantum computers.

physics.optics↗

arXiv2020

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, leveraging the low optical loss and strong EO coupling in this platform. We demonstrate a transduction efficiency of up to $2.7\times10^{-5}$, and a pump-power normalized efficiency of $1.9\times10^{-6}/\mathrm{μW}$. The transduction efficiency can be improved by further reducing the microwave resonator's piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

quant-ph↗

arXiv2019

Resolving photon numbers using a superconducting tapered nanowire detector

Time- and number-resolved photon detection is crucial for photonic quantum information processing. Existing photon-number-resolving (PNR) detectors usually have limited timing and dark-count performance or require complex fabrication and operation. Here we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The prototyping device was able to resolve up to five absorbed photons and had 16.1 ps timing jitter, <2 c.p.s. device dark count rate, $\sim$86 ns reset time, and 5.6% system detection efficiency (without cavity) at 1550 nm. Its exceptional distinction between single- and two-photon responses is ideal for coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination.

physics.ins-det↗

arXiv2019

Learning Local Feature Descriptor with Motion Attribute for Vision-based Localization

In recent years, camera-based localization has been widely used for robotic applications, and most proposed algorithms rely on local features extracted from recorded images. For better performance, the features used for open-loop localization are required to be short-term globally static, and the ones used for re-localization or loop closure detection need to be long-term static. Therefore, the motion attribute of a local feature point could be exploited to improve localization performance, e.g., the feature points extracted from moving persons or vehicles can be excluded from these systems due to their unsteadiness. In this paper, we design a fully convolutional network (FCN), named MD-Net, to perform motion attribute estimation and feature description simultaneously. MD-Net has a shared backbone network to extract features from the input image and two network branches to complete each sub-task. With MD-Net, we can obtain the motion attribute while avoiding increasing much more computation. Experimental results demonstrate that the proposed method can learn distinct local feature descriptor along with motion attribute only using an FCN, by outperforming competing methods by a wide margin. We also show that the proposed algorithm can be integrated into a vision-based localization algorithm to improve estimation accuracy significantly.

cs.CV↗

arXiv2019

Synthesis and Observation of Non-Abelian Gauge Fields in Real Space

Gauge fields, real or synthetic, are crucial for understanding and manipulation of physical systems. The associated geometric phases can be measured, for example, from the Aharonov--Bohm interference. So far, real-space realizations of gauge fields have been limited to Abelian (commutative) ones. Here we report an experimental synthesis of non-Abelian gauge fields in real space and the observation of the non-Abelian Aharonov--Bohm effect with classical waves and classical fluxes. Based on optical mode degeneracy, we break time-reversal symmetry in different manners---via temporal modulation and the Faraday effect---to synthesize tunable non-Abelian gauge fields. The Sagnac interference of two final states, obtained by reversely-ordered path integrals, demonstrates the non-commutativity of the gauge fields. Our work introduces real-space building blocks for non-Abelian gauge fields, relevant for classical and quantum exotic topological phenomena.

physics.optics↗

arXiv2019

A General Theoretical and Experimental Framework for Nanoscale Electromagnetism

Local, bulk response functions, e.g permittivity, and the macroscopic Maxwell equations completely specify the classical electromagnetic problem, which features only wavelength $λ$ and geometric scales. The above neglect of intrinsic electronic length scales $L_{\text{e}}$ leads to an eventual breakdown in the nanoscopic limit. Here, we present a general theoretical and experimental framework for treating nanoscale electromagnetic phenomena. The framework features surface-response functions---known as the Feibelman $d$-parameters---which reintroduce the missing electronic length scales. As a part of our framework, we establish an experimental procedure to measure these complex, dispersive surface response functions, enabled by quasi-normal-mode perturbation theory and observations of pronounced nonclassical effects---spectral shifts in excess of 30% and the breakdown of Kreibig-like broadening---in a quintessential multiscale architecture: film-coupled nanoresonators, with feature-sizes comparable to both $L_{\text{e}}$ and $λ$.

physics.optics↗

arXiv2018

Superconducting nanowire single-photon detector with integrated impedance-matching taper

Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated superconducting transmission line taper. The taper is a transformer that effectively loads the SNSPD with high impedance without latching. It increases the amplitude of the detector output while preserving the fast rising edge. Using a taper with a starting width of 500 nm, we experimentally observed a 3.6$\times$ higher pulse amplitude, 3.7$\times$ faster slew rate, and 25.1 ps smaller timing jitter. The results match our numerical simulation, which incorporates both the hotspot dynamics in the SNSPD and the distributed nature in the transmission line taper. The taper studied here may become a useful tool to interface high-impedance superconducting nanowire devices to conventional low-impedance circuits.

physics.ins-det↗

arXiv2018

Indistinguishable Single-Photon Sources with Dissipative Emitter Coupled to Cascaded Cavities

Recently, Grange et al. [Phys. Rev. Lett. 114, 193601 (2015)] showed the possibility of single photon generation with high indistinguishability from a quantum emitter, despite strong pure dephasing, by `funneling' emission into a photonic cavity. Here, we show that cascaded two-cavity system can further improve the photon characteristics and greatly reduce the Q-factor requirement to levels achievable with present-day technology. Our approach leverages recent advances in nanocavities with ultrasmall mode volume and does not require ultrafast excitation of the emitter. These results were obtained by numerical and closed-form analytical models with strong emitter dephasing, representing room-temperature quantum emitters.

quant-ph↗

arXiv2018

Modelling Irregular Spatial Patterns using Graph Convolutional Neural Networks

The understanding of geographical reality is a process of data representation and pattern discovery. Former studies mainly adopted continuous-field models to represent spatial variables and to investigate the underlying spatial continuity/heterogeneity in the regular spatial domain. In this article, we introduce a more generalized model based on graph convolutional neural networks (GCNs) that can capture the complex parameters of spatial patterns underlying graph-structured spatial data, which generally contain both Euclidean spatial information and non-Euclidean feature information. A trainable semi-supervised prediction framework is proposed to model the spatial distribution patterns of intra-urban points of interest(POI) check-ins. This work demonstrates the feasibility of GCNs in complex geographic decision problems and provides a promising tool to analyze irregular spatial data.

stat.ML↗

arXiv2018

A distributed electrical model for superconducting nanowire single photon detectors

To analyze the switching dynamics and output performance of a superconducting nanowire single photon detector (SNSPD), the nanowire is usually modelled as an inductor in series with a time-varying resistor induced by absorption of a photon. Our recent experimental results show that, due to the effect of kinetic inductance, for a SNSPD made of a nanowire of sufficient length, its geometry length can be comparable to or even longer than the effective wavelength of frequencies contained in the output pulse. In other words, a superconducting nanowire can behave as a distributed transmission line so that the readout pulse depends on the photon detection location and the transmission line properties of the nanowire. Here, we develop a distributed model for a superconducting nanowire and apply it to simulate the output performance of a long nanowire designed into a coplanar waveguide. We compare this coplanar waveguide geometry to a conventional meander nanowire geometry. The simulation results agree well with our experimental observations. With this distributed model, we discussed the importance of microwave design of a nanowire and how impedance matching can affect the output pulse shape. We also discuss how the distributed model affects the growth and decay of the photon-triggered resistive hotspot.

physics.app-ph↗

arXiv2017

A scalable multi-photon coincidence detector based on superconducting nanowires

Coincidence detection of single photons is crucial in numerous quantum technologies and usually requires multiple time-resolved single-photon detectors. However, the electronic readout becomes a major challenge when the measurement basis scales to large numbers of spatial modes. Here, we address this problem by introducing a two-terminal coincidence detector that enables scalable readout of an array of detector segments based on superconducting nanowire microstrip transmission line. Exploiting timing logic, we demonstrate a 16-element detector that resolves all 136 possible single-photon and two-photon coincidence events. We further explore the pulse shapes of the detector output and resolve up to four-photon coincidence events in a 4-element device, giving the detector photon-number-resolving capability. This new detector architecture and operating scheme will be particularly useful for multi-photon coincidence detection in large-scale photonic integrated circuits.

physics.ins-det↗

arXiv2017

Operation of a superconducting nanowire in two detection modes: KID and SPD

We present the performance of a superconducting nanowire that can be operated in two detection modes: i) as a kinetic inductance detector (KID) or ii) as a single-photon detector (SPD). Two superconducting nanowires developed for use as single-photon detectors (SNSPDs) are embedded as the inductive (L) component in resonant inductor/capacitor (LC) circuits coupled to a microwave transmission line. The capacitors are low loss commercial chip capacitors and limit the internal quality factor of the resonators to approximately $Q_i = 170$. The resonator quality factor, $Q_r \simeq 23$, is dominated by the coupling to the feedline and limits the detection bandwidth to on the order of 1MHz. When operated in KID mode, the detectors are AC biased with tones at their resonant frequencies of 45.85 and 91.81MHz. In the low-bias, standard KID mode, a single photon produces a hot spot that does not turn an entire section of the line normal but only increases the kinetic inductance. In the high-bias, critical KID mode, a photon event turns a section of the line normal and the resonance is destroyed until the normal region is dissipated. When operated as an SPD in Geiger mode, the resonators are DC biased through cryogenic bias tees and each photon produces a sharp voltage step followed by a ringdown signal at the resonant frequency of the detector which is converted to a standard pulse with an envelop detector. We show that AC biasing in the critical KID mode is inferior to the sensitivity achieved in DC-biased SPD mode due to the small fraction of time spent near the critical current with an AC bias.

physics.ins-det↗

arXiv2017

Dynamics of epidemic models with asymptomatic infection and seasonal succession

In this paper, we consider a compartmental SIRS epidemic model with asymptomatic infection and seasonal succession, which is a periodic discontinuous differential system. The basic reproduction number $\mathcal{R}_0$ is defined and valuated directly for this model, and the uniformly persistent of the disease and threshold dynamics are obtained. Specially, global dynamics of the model without seasonal force are studied. It is shown that the model has only a disease-free equilibrium which is globally stable if $\mathcal{R}_0\le 1$, and as $\mathcal{R}_0>1$ the disease-free equilibrium is unstable and the model has an endemic equilibrium, which is globally stable if the recovering rates of asymptomatic infective and symptomatic infective are close. These theoretical results provide an intuitive basis for understanding that the asymptomatic infective individuals and the disease seasonal transmission promote the evolution of epidemic, which allow us to predict the outcomes of control strategies during the course of the epidemic.

math.DS↗

arXiv2016

A Single-Photon Imager Based on Microwave Plasmonic Superconducting Nanowire

Detecting spatial and temporal information of individual photons by using single-photon-detector (SPD) arrays is critical to applications in spectroscopy, communication, biological imaging, astronomical observation, and quantum-information processing. Among the current SPDs1,detectors based on superconducting nanowires have outstanding performance2, but are limited in their ability to be integrated into large scale arrays due to the engineering difficulty of high-bandwidth cryogenic electronic readout3-8. Here, we address this problem by demonstrating a scalable single-photon imager using a single continuous photon-sensitive superconducting nanowire microwave-plasmon transmission line. By appropriately designing the nanowire's local electromagnetic environment so that the nanowire guides microwave plasmons, the propagating voltages signals generated by a photon-detection event were slowed down to ~ 2% of the speed of light. As a result, the time difference between arrivals of the signals at the two ends of the nanowire naturally encoded the position and time of absorption of the photon. Thus, with only two readout lines, we demonstrated that a 19.7-mm-long nanowire meandered across an area of 286 μm * 193 μm was capable of resolving ~590 effective pixels while simultaneously recording the arrival times of photons with a temporal resolution of 50 ps. The nanowire imager presents a scalable approach to realizing high-resolution photon imaging in time and space.

physics.optics↗

arXiv2016

Superconducting nanowire detector jitters limited by detector geometry

Detection jitter quantifies variance introduced by the detector in the determination of photon arrival time. It is a crucial performance parameter for systems using superconducting nanowire single photon detectors (SNSPDs). In this work, we have demonstrated that the detection timing jitter is limited in part by the spatial variation of photon detection events along the length of the wire. This distribution causes the generated electrical pulses to arrive at the readout at varied times. We define this jitter source as geometric jitter since it is related to the length and area of the SNSPD. To characterize the geometric jitter, we have constructed a novel differential cryogenic readout with less than 7 ps of electronic jitter that can amplify the pulses generated from the two ends of an SNSPD. By differencing the measured arrival times of the two electrical pulses, we were able to partially cancel out the difference of the propagation times and thus reduce the uncertainty of the photon arrival time. Our experimental data indicates that the variation of the differential propagation time was a few ps for a 3 μm x 3 μm device while it increased up to 50 ps for a 20 μm x 20 μm device. In a 20 μm x 20 μm large SNSPD, we achieved a 20% reduction in the overall detection timing jitter for detecting telecom-wavelength photons by using the differential cryogenic readout. The geometric jitter hypothesis was further confirmed by studying jitter in devices that consisted of long wires with 1-μm-long narrowed regions used for sensing photons.

cond-mat.supr-con↗