SearcharxivSearch

arXiv subjects

Dian Li

Publications and source records attributed to Dian Li.

At least 19 recordsLinked to original sources

Online Dynamic Batching with Formal Guarantees for LLM Training

Modern LLM training breaks a core assumption behind offline batch samplers: the true training cost of a sample is only observable after preprocessing, augmentation, templating, tokenization, and multimodal visual-token expansion. Unless one pays for a preprocessing- and augmentation-dependent length cache, batch construction is therefore blind to the quantity that determines padding, memory use, and GPU saturation. We introduce Online Dynamic Batching (ODB), a DataLoader-side drop-in system that moves batch formation to this point of accurate observability while preserving DDP step alignment. We formalize this synchronization requirement as the Distributed Group Alignment Problem and prove deadlock-free bounded termination with default join-mode identity coverage and opt-in non-join sample-quota closure. ODB requires no model, optimizer, or attention-kernel changes and is released as online-dynamic-batching with lightweight trainer adapters. Across public 2B/8B Qwen3-VL runs on UltraChat/LLaVA/ShareGPT4o, ODB improves literal emitted-sample throughput vs. fixed-batch Standard by 1.58-2.51x on single-node Full FT/LoRA and 1.71-3.78x on two-node Full FT, with Standard-comparable quality; production MM-Mix reaches 4.43x. Against GMT/BMT offline token-budget oracles, ODB is within 15% on UltraChat/LLaVA and faster on high-CV ShareGPT4o: 2.24-2.39x single-node Full FT/LoRA and 3.06-3.69x two-node Full FT. Together, ODB occupies the online/drop-in regime for high-heterogeneity LLM fine-tuning: large throughput gains at Standard-comparable quality, formal DGAP guarantees, and no length-cache precompute or kernel rewrites.

cs.DC

LiveK12Bench: Have Large Multimodal Models Truly Conquered High School-level Examinations?

Advanced Large Multimodal Models (LMMs) have demonstrated impressive performance in K-12 reasoning tasks, exhibiting great promise as intelligent tutors. Realizing this potential requires models to navigate real-world examinations effectively, yet most existing benchmarks fail to capture the complexity of authentic testing environments. Specifically, most datasets are static, prone to data contamination, and are often confined to restricted modalities, disciplines, and evaluation criteria. To address these issues, we introduce LiveK12Bench, a dynamic, holistic, multi-disciplinary benchmark designed to evaluate the reasoning abilities of LMMs in realistic examination scenarios. LiveK12Bench comprises 2K+ verified questions spanning Mathematics, Physics, Chemistry, and Biology, sourced from the latest real-world exam papers and designed to grow over time. Our framework features several core innovations: 1) featuring an automated pipeline that continuously ingests and parses the latest examination papers to mitigate data leakage; and 2) proposing a novel `Mock Exam' evaluation scheme, which assesses the ability to complete end-to-end exams autonomously with accurate and efficient reasoning paths. Extensive experiments on 12 LMMs reveal that advanced models suffer substantial performance degradation under exam-realistic constraints: GPT-5's score drops from 79 to 53 (out of 100) when process rigor and efficiency are jointly evaluated. Our findings expose critical vulnerabilities, such as sensitivity to complex visual layouts, highlighting the gap between idealized reasoning capabilities and true educational readiness. Both code and dataset are publicly available.

cs.AI

Adaptive Global and Fine-Grained Perceptual Fusion for MLLM Embeddings Compatible with Hard Negative Amplification

Multimodal embeddings serve as a bridge for aligning vision and language, with the two primary implementations -- CLIP-based and MLLM-based embedding models -- both limited to capturing only global semantic information. Although numerous studies have focused on fine-grained understanding, we observe that complex scenarios currently targeted by MLLM embeddings often involve a hybrid perceptual pattern of both global and fine-grained elements, thus necessitating a compatible fusion mechanism. In this paper, we propose Adaptive Global and Fine-grained perceptual Fusion for MLLM Embeddings (AGFF-Embed), a method that prompts the MLLM to generate multiple embeddings focusing on different dimensions of semantic information, which are then adaptively and smoothly aggregated. Furthermore, we adapt AGFF-Embed with the Explicit Gradient Amplification (EGA) technique to achieve in-batch hard negatives enhancement without requiring fine-grained editing of the dataset. Evaluation on the MMEB and MMVP-VLM benchmarks shows that AGFF-Embed comprehensively achieves state-of-the-art performance in both general and fine-grained understanding compared to other multimodal embedding models.

cs.CV

Concise Geometric Description as a Bridge: Unleashing the Potential of LLM for Plane Geometry Problem Solving

Plane Geometry Problem Solving (PGPS) is a multimodal reasoning task that aims to solve a plane geometric problem based on a geometric diagram and problem textual descriptions. Although Large Language Models (LLMs) possess strong reasoning skills, their direct application to PGPS is hindered by their inability to process visual diagrams. Existing works typically fine-tune Multimodal LLMs (MLLMs) end-to-end on large-scale PGPS data to enhance visual understanding and reasoning simultaneously. However, such joint optimization may compromise base LLMs' inherent reasoning capability. In this work, we observe that LLM itself is potentially a powerful PGPS solver when appropriately formulating visual information as textual descriptions. We propose to train a MLLM Interpreter to generate geometric descriptions for the visual diagram, and an off-the-shelf LLM is utilized to perform reasoning. Specifically, we choose Conditional Declaration Language (CDL) as the geometric description as its conciseness eases the MLLM Interpreter training. The MLLM Interpreter is fine-tuned via CoT (Chain-of-Thought)-augmented SFT followed by GRPO to generate CDL. Instead of using a conventional solution-based reward that compares the reasoning result with the ground-truth answer, we design CDL matching rewards to facilitate more effective GRPO training, which provides more direct and denser guidance for CDL generation. To support training, we construct a new dataset, Formalgeo7k-Rec-CoT, by manually reviewing Formalgeo7k v2 and incorporating CoT annotations. Extensive experiments on Formalgeo7k-Rec-CoT, Unigeo, and MathVista show our method (finetuned on only 5.5k data) performs favorably against leading open-source and closed-source MLLMs.

cs.AI

Learning to Pose Problems: Reasoning-Driven and Solver-Adaptive Data Synthesis

Data synthesis for training large reasoning models offers a scalable alternative to limited, human-curated datasets, enabling the creation of high-quality data. However, existing approaches face several challenges: (i) indiscriminate generation that ignores the solver's ability and yields low-value problems, or reliance on complex data pipelines to balance problem difficulty; and (ii) a lack of reasoning in problem generation, leading to shallow problem variants. In this paper, we develop a problem generator that reasons explicitly to plan problem directions before synthesis and adapts difficulty to the solver's ability. Specifically, we construct related problem pairs and augment them with intermediate problem-design CoT produced by a reasoning model. These data are used to bootstrap problem-design strategies in the generator. Then, we treat the solver's feedback on synthetic problems as a reward signal, enabling the generator to calibrate difficulty and produce complementary problems near the edge of the solver's competence. Extensive experiments on 10 mathematical and general reasoning benchmarks show that our proposed framework achieves a cumulative average improvement of 3.4%, demonstrating robust generalization across both language and vision-language models.

cs.AI

Constructions of Optimal Frequency-Hopping Sequences with Controlled Minimum Gaps

Frequency-hopping sequences (FHSs) with low Hamming correlation and wide gaps significantly contribute to the anti-interference performance in FH communication systems. This paper investigates FHSs with optimal Hamming correlation and controlled minimum gaps. We start with the discussion of the upper bounds on the minimum gaps of uniform FHSs and then propose a general construction of optimal uniform wide-gap FHSs with length 2l and 3l, which includes the work by Li et al. in IEEE Trans. Inf. Theory, vol. 68, no. 1, 2022 as a special case. Furthermore, we present a recursive construction of FHSs with length 2l, which concatenate shorter sequences of known minimum gaps. It is shown that the resulting FHSs have the same Hamming correlation as the concatenation-ordering sequences. As applications, several known optimal FHSs are used to produce optimal FHSs with controlled minimum gaps.

cs.IT

Improve Multi-Modal Embedding Learning via Explicit Hard Negative Gradient Amplifying

With the rapid advancement of multi-modal large language models (MLLMs) in recent years, the foundational Contrastive Language-Image Pretraining (CLIP) framework has been successfully extended to MLLMs, enabling more powerful and universal multi-modal embeddings for a wide range of retrieval tasks. Despite these developments, the core contrastive learning paradigm remains largely unchanged from CLIP-style models to MLLMs. Within this framework, the effective mining of hard negative samples continues to be a critical factor for enhancing performance. Prior works have introduced both offline and online strategies for hard negative mining to improve the efficiency of contrastive learning. While these approaches have led to improved multi-modal embeddings, the specific contribution of each hard negative sample to the learning process has not been thoroughly investigated. In this work, we conduct a detailed analysis of the gradients of the info-NCE loss with respect to the query, positive, and negative samples, elucidating the role of hard negatives in updating model parameters. Building upon this analysis, we propose to explicitly amplify the gradients associated with hard negative samples, thereby encouraging the model to learn more discriminative embeddings. Our multi-modal embedding model, trained with the proposed Explicit Gradient Amplifier and based on the LLaVA-OneVision-7B architecture, achieves state-of-the-art performance on the MMEB benchmark compared to previous methods utilizing the same MLLM backbone. Furthermore, when integrated with our self-developed MLLM, QQMM, our approach attains the top rank on the MMEB leaderboard. Code and models are released on https://github.com/QQ-MM/QQMM-embed.

cs.CV

Fact-R1: Towards Explainable Video Misinformation Detection with Deep Reasoning

The rapid spread of multimodal misinformation on social media has raised growing concerns, while research on video misinformation detection remains limited due to the lack of large-scale, diverse datasets. Existing methods often overfit to rigid templates and lack deep reasoning over deceptive content. To address these challenges, we introduce FakeVV, a large-scale benchmark comprising over 100,000 video-text pairs with fine-grained, interpretable annotations. In addition, we further propose Fact-R1, a novel framework that integrates deep reasoning with collaborative rule-based reinforcement learning. Fact-R1 is trained through a three-stage process: (1) misinformation long-Chain-of-Thought (CoT) instruction tuning, (2) preference alignment via Direct Preference Optimization (DPO), and (3) Group Relative Policy Optimization (GRPO) using a novel verifiable reward function. This enables Fact-R1 to exhibit emergent reasoning behaviors comparable to those observed in advanced text-based reinforcement learning systems, but in the more complex multimodal misinformation setting. Our work establishes a new paradigm for misinformation detection, bridging large-scale video understanding, reasoning-guided alignment, and interpretable verification.

cs.CV

Critique Before Thinking: Mitigating Hallucination through Rationale-Augmented Instruction Tuning

Despite significant advancements in multimodal reasoning tasks, existing Large Vision-Language Models (LVLMs) are prone to producing visually ungrounded responses when interpreting associated images. In contrast, when humans embark on learning new knowledge, they often rely on a set of fundamental pre-study principles: reviewing outlines to grasp core concepts, summarizing key points to guide their focus and enhance understanding. However, such preparatory actions are notably absent in the current instruction tuning processes. This paper presents Re-Critic, an easily scalable rationale-augmented framework designed to incorporate fundamental rules and chain-of-thought (CoT) as a bridge to enhance reasoning abilities. Specifically, Re-Critic develops a visual rationale synthesizer that scalably augments raw instructions with rationale explanation. To probe more contextually grounded responses, Re-Critic employs an in-context self-critic mechanism to select response pairs for preference tuning. Experiments demonstrate that models fine-tuned with our rationale-augmented dataset yield gains that extend beyond hallucination-specific tasks to broader multimodal reasoning tasks.

cs.CV

Adaptive Compressive Tactile Subsampling: Enabling High Spatiotemporal Resolution in Scalable Robotic Skin

Robots require full-body, high-resolution tactile sensing to operate safely in unstructured environments, enabling reflexive responses and closed-loop control. However, the pixel counts needed for dense, large-area coverage limit readout rates of most tactile arrays to <100 Hz, hindering their use in high-speed tasks. We present Adaptive Compressive Tactile Subsampling (ACTS), a scalable and data-driven method that greatly enhances traditional tactile matrices by leveraging adaptive sensor sampling and sparse recovery. By adaptively allocating measurements to informative regions, ACTS is especially effective for spatially sparse signals common in real-world interactions. Tested on a 1024-pixel tactile sensor array (32x32), ACTS achieved frame rates up to 1,000 Hz, an 18X improvement over conventional raster scanning, with minimal reconstruction error. For the first time, ACTS enables wearable, large-area, high-density tactile sensing systems that can deliver high-speed results. We demonstrate rapid object classification within 20 ms of contact, high-speed projectile detection, ricochet angle estimation, and soft deformation tracking, in tactile and robotics applications, all using flexible, high-density tactile arrays. These include high-resolution tactile gloves, pressure insoles, and full-body configurations covering robotic arms and human-sized mannequins. We further showcase tactile-based closed-loop control by guiding a metallic ball to trace letters using tactile feedback and by executing tactile-only whole-hand reflexes on a fully sensorized LEAP hand to stabilize grasps, prevent slip, and avoid sharp objects, validating ACTS for real-time interaction and motion control. ACTS transforms standard, low-cost, and robust tactile sensors into high-speed systems enabling scalable, responsive, and adaptive tactile perception for robots and wearables operating in dynamic environments.

cs.RO

Innovative Thinking, Infinite Humor: Humor Research of Large Language Models through Structured Thought Leaps

Humor is previously regarded as a gift exclusive to humans for the following reasons. Humor is a culturally nuanced aspect of human language, presenting challenges for its understanding and generation. Humor generation necessitates a multi-hop reasoning process, with each hop founded on proper rationales. Although many studies, such as those related to GPT-o1, focus on logical reasoning with reflection and correction, they still fall short in humor generation. Due to the sparsity of the knowledge graph in creative thinking, it is arduous to achieve multi-hop reasoning. Consequently, in this paper, we propose a more robust framework for addressing the humor reasoning task, named LoL. LoL aims to inject external information to mitigate the sparsity of the knowledge graph, thereby enabling multi-hop reasoning. In the first stage of LoL, we put forward an automatic instruction-evolution method to incorporate the deeper and broader thinking processes underlying humor. Judgment-oriented instructions are devised to enhance the model's judgment capability, dynamically supplementing and updating the sparse knowledge graph. Subsequently, through reinforcement learning, the reasoning logic for each online-generated response is extracted using GPT-4o. In this process, external knowledge is re-introduced to aid the model in logical reasoning and the learning of human preferences. Finally, experimental results indicate that the combination of these two processes can enhance both the model's judgment ability and its generative capacity. These findings deepen our comprehension of the creative capabilities of large language models (LLMs) and offer approaches to boost LLMs' creative abilities for cross-domain innovative applications.

cs.AI

Chip-Tuning: Classify Before Language Models Say

The rapid development in the performance of large language models (LLMs) is accompanied by the escalation of model size, leading to the increasing cost of model training and inference. Previous research has discovered that certain layers in LLMs exhibit redundancy, and removing these layers brings only marginal loss in model performance. In this paper, we adopt the probing technique to explain the layer redundancy in LLMs and demonstrate that language models can be effectively pruned with probing classifiers. We propose chip-tuning, a simple and effective structured pruning framework specialized for classification problems. Chip-tuning attaches tiny probing classifiers named chips to different layers of LLMs, and trains chips with the backbone model frozen. After selecting a chip for classification, all layers subsequent to the attached layer could be removed with marginal performance loss. Experimental results on various LLMs and datasets demonstrate that chip-tuning significantly outperforms previous state-of-the-art baselines in both accuracy and pruning ratio, achieving a pruning ratio of up to 50%. We also find that chip-tuning could be applied on multimodal models, and could be combined with model finetuning, proving its excellent compatibility.

cs.CL

Video-CCAM: Enhancing Video-Language Understanding with Causal Cross-Attention Masks for Short and Long Videos

Multi-modal large language models (MLLMs) have demonstrated considerable potential across various downstream tasks that require cross-domain knowledge. MLLMs capable of processing videos, known as Video-MLLMs, have attracted broad interest in video-language understanding. However, videos, especially long videos, contain more visual tokens than images, making them difficult for LLMs to process. Existing works either downsample visual features or extend the LLM context size, risking the loss of high-resolution information or slowing down inference speed. To address these limitations, we apply cross-attention layers in the intermediate projector between the visual encoder and the large language model (LLM). As the naive cross-attention mechanism is insensitive to temporal order, we further introduce causal cross-attention masks (CCAMs) within the cross-attention layers. This Video-MLLM, named Video-CCAM, is trained in a straightforward two-stage fashion: feature alignment and visual instruction tuning. We develop several Video-CCAM models based on LLMs of different sizes (4B, 9B, and 14B). Video-CCAM proves to be a robust Video-MLLM and shows outstanding performance from short videos to long ones. Among standard video benchmarks like MVBench and VideoChatGPT-QA, Video-CCAM shows outstanding performances (1st/2nd/3rd in MVBench and TGIF-QA, 2nd/3rd/4th in MSVD-QA, MSRVTT-QA, and ActivityNet-QA). In benchmarks encompassing long videos, Video-CCAM models can be directly adapted to long video understanding and still achieve exceptional scores despite being trained solely with images and 16-frame videos. Using 96 frames (6$\times$ the training number of frames), Video-CCAM models rank 1st/2nd/3rd in VideoVista and 1st/2nd/4th in MLVU among all open-source Video-MLLMs, respectively. The code is publicly available in \url{https://github.com/QQ-MM/Video-CCAM}.

cs.CV

MetaTool: Facilitating Large Language Models to Master Tools with Meta-task Augmentation

Utilizing tools with Large Language Models (LLMs) is essential for grounding AI agents in real-world applications. The prevailing approach involves few-shot prompting with demonstrations or fine-tuning with expert annotations. However, mere in-context demonstrations may fail to cover sufficient knowledge for complex tools and tasks. Training on solution paths is also hindered by the high cost of expert annotations and generalizing to new tools. A core challenge of generalizable tool use lies in understanding the "meta", or fundamental natures of tools that are transferable across tasks, such as causality and constraints. In this paper, we present MetaTool, a novel tool learning methodology designed to generalize across any reusable toolset. Our approach incorporates a self-supervised augmentation technique derived from a series of meta-tasks. This involves predicting masked elements in the tool execution process. The self-supervised procedure enables scalable generation of high-quality QA data, which is handy for supervising tool understanding. By incorporating meta-task data into task-oriented training, our method significantly enhances the performance of open-source LLMs, achieving results comparable to ChatGPT in both tool-based planning and chatting scenarios. Through large-scale instruction tuning, the MetaTool model demonstrates impressive zero-shot generalizability on new tasks.

cs.CL

A study on the thermal conductance of interface between dissimilar metals

Whether diffuse mismatch model for electrons (DMMe) hold true in more general cases remains largely unexplored, especially in cases where at least one material does not behave like a free-electron metal and/or the interface is smooth enough to allow non-diffuse transmission of electrons. In this study, DMMe was proposed to predict the thermal conductance of metal-metal interfaces. A set of aluminum-X samples (X = Cu, Ag, Fe, Ni) were grown and the time domain thermoreflectance (TDTR) technique was used to measure the metal-metal interface conductance. It was then compared to the two variants of the DMMe-using both a crude theory based on free-electron metals and accurate band structures provided by density functional theory.

cond-mat.mtrl-sci

An evaluation strategy of the thermal conductance of semiconductor interfaces using ultraviolet light

In the previous studies, the ultraviolet light thermoreflectance (UV-TDTR) signal from bulk semiconducting samples cannot be well explained by a thermal models based on the assumption that the heat is both absorbed and probed near the surface. A thermoreflectance (TDTR) technique was developed to directly excite semiconductors using UV-TDTR. At {\lambda} = 400nm, the photon energy is much greater than most semiconducting bandgaps, potentially allowing semiconducting transducers to absorb light within about 10 nm of the surface, potentially enabling direct measurements of semiconductor-semiconductor interfaces. The thermoreflectance coefficient for some direct-bandgap semiconducting materials was measured. Thermal transport models were fitted to thermorefectance data collected from the system. The differences in the signal for semiconductors with different doping and nanostructure features were also studied, which should change the recombination rate. No significant changes to the signal were observed.

physics.app-ph

Vision-Language Instruction Tuning: A Review and Analysis

Instruction tuning is a crucial supervised training phase in Large Language Models (LLMs), aiming to enhance the LLM's ability to generalize instruction execution and adapt to user preferences. With the increasing integration of multi-modal data into LLMs, there is growing interest in Vision-Language Instruction Tuning (VLIT), which presents more complex characteristics compared to pure text instruction tuning. In this paper, we systematically review the latest VLIT settings and corresponding datasets in multi-modal LLMs and provide insights into the intrinsic motivations behind their design. For the first time, we offer a detailed multi-perspective categorization for existing VLIT datasets and identify the characteristics that high-quality VLIT data should possess. By incorporating these characteristics as guiding principles into the existing VLIT data construction process, we conduct extensive experiments and verify their positive impact on the performance of tuned multi-modal LLMs. Furthermore, we discuss the current challenges and future research directions of VLIT, providing insights for the continuous development of this field. The code and dataset related to this paper have been open-sourced at https://github.com/palchenli/VL-Instruction-Tuning.

cs.MM

Unified Pretraining Target Based Video-music Retrieval With Music Rhythm And Video Optical Flow Information

Background music (BGM) can enhance the video's emotion. However, selecting an appropriate BGM often requires domain knowledge. This has led to the development of video-music retrieval techniques. Most existing approaches utilize pretrained video/music feature extractors trained with different target sets to obtain average video/music-level embeddings. The drawbacks are two-fold. One is that different target sets for video/music pretraining may cause the generated embeddings difficult to match. The second is that the underlying temporal correlation between video and music is ignored. In this paper, our proposed approach leverages a unified target set to perform video/music pretraining and produces clip-level embeddings to preserve temporal information. The downstream cross-modal matching is based on the clip-level features with embedded music rhythm and optical flow information. Experiments demonstrate that our proposed method can achieve superior performance over the state-of-the-art methods by a significant margin.

cs.MM